Diversity Fin Antenna™ Installation Guide For more information visit

Diversity Fin Antenna™ Installation Guide For more information visit
Diversity Fin Antenna™
Installation Guide
Connect 50 ohm, low-loss
coaxial cables to right angle
BNC connectors on Diversity
Fin. (RF Venue RG8X cabling
recommended, PN: RG8X25 or
RG8X50)
Connect first cable to ‘A’ side of
wireless microphone receiver
or antenna distributor and
second cable to ‘B’ side
The Diversity Fin™ Antenna is designed to be used with
wireless microphone systems and other diversity UHF
receivers, and comprises two separate antenna
elements- a directional LPDA and bi-directional dipole.
The LPDA and the dipole are oriented 90 degrees from
one another to achieve spatial diversity and improve
signal reception in indoor environments.
Model Number
Operating frequency
Bandwidth
Average return loss
Impedance
Pattern type
Drill mounting holes and screw
L bracket to wall using provided
screws and drywall inserts if
needed.
Adjust Diversity Fin angle and
height to achieve line of sight to
stage or primary wireless area
DFIN
468-740 MHz
272 MHz
-9.4 dBm
50 Ω
Dual Omni-Unidirectional
LPDA
Beam width
F/B Ratio
F/S Ratio
Gain
Polarization
140º
8 dB
5 dB
5 dBd
Vertical
Dipole
Beam width
F/B Ratio
F/S Ratio
Gain
Polarization
100º
5 dB
13 dB
1.8 dBd
Horizontal
Connector
Length
Height
Weight
Mount
Color
For more information visit www.RFvenue.com or call 617-500-9096
BNC Female (2)
12 in / 300mm
15 in / 370mm
1 lb / 454 g
L-Bracket Wallmount
Matte White
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising