Byron BT - Gear4music

Byron BT - Gear4music
Byron BT
BLUETOOTH IN-EAR HEADSET
Manual
Byron BT – In-ear headset
3
Contents
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.
Operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.
Button Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.
Getting started with your Byron BT
6.1 Pairing to your mobile phone
6.2 Multi point setting. . . . . . . .
6.3 Call . . . . . . . . . . . . . . . . . .
6.4 Factory reset . . . . . . . . . . . .
6.5 Playing music . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.9
.9
10
10
11
11
7.
What does the LED colour mean? . . . . . . . . . . . . . . . . . . . . . 11
8.
FAQ & Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9.
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
10. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
11. Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
12. Battery disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
13. Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
14. Simplified EU Declaration of Conformity . . . . . . . . . . . . . . . . 15
english
1.
Byron BT – In-ear headset
4
Thank you for selecting the Byron BT stereo Bluetooth in-ear headset from
beyerdynamic. Please take some time to read carefully through this
manual before using the product. Please keep the manual. When passing
on the headset to a third party, please pass on the manual as well.
1.
Safety instructions
Warning:
When connecting the in-ear headset, make sure that you
have turned the volume down to the minimum. Adjust the
volume only after the in-ear headset are in place. To avoid
any potential damage to your hearing, do not use the in-ear
headset at loud volumes for extended periods of time. As a
rule of thumb, when you have the in-ear headset on, set the
volume to a level at which you can still hear your own voice
when you speak at a normal volume while listening.
We would like to point out that listening at high volumes over
a long period of time may damage your hearing irreversibly.
Make sure that the set volume is not too high.
Rule of thumb: The higher the volume, the shorter the time
of listening. According to employer’s regulations for safety
and health the noise exposure should not exceed 85 dB (low
volume) when working with an allowed time of listening of 8
hours at maximum. If the volume is increased by 3 dB, the
allowed time of listening is halved, i.e. with 88 dB the time
of listening is 4 hours, with 91 dB 2 hours and so on.
Danger!
In-ear headsets dramatically reduce your ability to hear ambient noise.
Using the in-ear headsets while in road traffic is potentially very dangerous
and is therefore prohibited by law. Also, please make sure that you do not
use your in-ear headset when in the vicinity of possibly dangerous
machines and tools.
Risk of injury!
When wearing wired in-ear headphones, avoid any sudden movements.
You could seriously injure yourself, especially if you have any piercings or
wear earrings or glasses, etc. that can get caught in the wire.
Altered auditory perception
Many people need some time to get used to wearing in-ear headsets. Your
auditory perception of your own voice and body, and even the sounds in
Byron BT – In-ear headset
5
2.
1
4
1
1
3.
english
your inner ear while walking, are different from “normal” situations when
you are not wearing an in-ear headset. This strange sensation will usually
abate after wearing in-ear headsets for a while.
Accessories
pair of in-ear headset
pairs of eartips (1x S, 2x M, 1x L)
pair of ear hooks
charging cable
Controls and indicators
햸
햹
햲
햳
햵
햶
햷
햴
햲 Microphone
햳 LED display for in-ear headset
status
햴 Charging socket
햵 Volume up, next song etc.
햶 Main function button (MFB) for
turning on/off, answer/reject/
convert a call/play/etc.
햷 Volume down, previous song
etc.
햸 Ear hook for comfortable
wearing
햹 Fixing magnet for holding L/R
earphone together while not in
use
Byron BT – In-ear headset
6
4.
Operating instructions
When turning the headset on/off or selecting the pairing mode, you will
hear a voice prompt.
Turn on the in-ear headset
Press the MFB button until you hear “Power on” and the blue LED glows.
Turn off the in-ear headset
When you press the MFB button for a longer time (approx. 5 seconds),
the purple LED will glow and the headset is turned off after you hear
“Power off”.
Charging
Charging is possible with the supplied micro USB charging cable.
Byron BT – In-ear headset
Button guide
You can easily control the in-ear headset with these 3 buttons.
Volume up
Volume down
MFB
Basic in-ear headset control
Press the MFB button
Answer a call . . . . . . . . . Press briefly
End a call . . . . . . . . . . . . Press briefly
Turn on headset . . . . . . . Press for 2 seconds
(If there is a paired device, it connects to the paired device.)
Turn off headset . . . . . . . Press for 5 seconds
If you press the MFB button for a longer time, the purple LED glows and
the in-ear headset will be turned off after you hear “Power off”.
Pairing mode . . . . . . . . . Press for 6 seconds when you turn on
(if the headset has been connected to a device
before, the headset must be turned off and
turned on again as described before)
Reject a call . . . . . . . . . . Press for 1 second
Convert a call . . . . . . . . . Press briefly during call
Play/Pause . . . . . . . . . . . Press briefly
Stop. . . . . . . . . . . . . . . . Press for 1 second (during play)
english
5.
7
Byron BT – In-ear headset
8
Press the Volume up button
Volume up (+) . . . . . . . . . Press briefly
Mic mute . . . . . . . . . . . . Press for 1 second (during call)
Next song . . . . . . . . . . . . Press for 1 second (during play)
Press the Volume down button
Volume down (-) . . . . . . . Press briefly
Mic mute . . . . . . . . . . . . Press for 1 second (during call)
Previous song . . . . . . . . . Press for 1 second (during play)
Factory reset
Press the buttons in the following order:
+
+
+
+
The purple LED will glow and the in-ear headset will be initialised.
After a factory reset, pair the in-ear headset again for use.
Byron BT – In-ear headset
Getting started with your Byron BT
6.1 Pairing to your mobile phone
Before you use the Byron BT in-ear headset, you have to pair it with
your mobile phone or Bluetooth enabled device. The pairing process
may be different with various mobile phone makers. Please refer to
the appropriate mobile phone manual.
When the in-ear headset is turned off, press the MFB button for
6 seconds to start the pairing mode (blue LED is continuously on).
Select the Bluetooth mode on your mobile phone.
Pairing on first purchasing
• Select the pairing mode with the Bluetooth in-ear headset.
• Pairing with mobile phone (you need to pair with your mobile
within 3 minutes).
• On first purchasing, the in-ear headset enters into pairing mode
automatically when the power is on and the blue LED is
continuously on.
Pairing with mobile phone setting
• Activate the Bluetooth function on your mobile phone according
to the phone manual, search the in-ear headset model name and
select. Then “Pairing” is displayed. (Some mobile phones need
pass key (PIN), then enter 0000).
• If pairing is successful, the message “Connected to phone and
media audio” is displayed and the blue LED glows 5 times. Now
it is ready to use.
Pairing to other devices
• Select the pairing mode with the Bluetooth in-ear headset.
• Deactivate the Bluetooth function of the connected device if
there is a connected device.
• Press the MFB button for 5 seconds to turn off.
• Press the MFB button for 6 seconds. The in-ear headset is turned
on and enters into the pairing mode.
Pairing with mobile phone
• Follow the pairing procedure as described above in the paragraph
“Pairing with mobile phone setting”.
• If pairing is successful, the message “Connected to phone and
media audio” is displayed and the blue LED glows 5 times. Now
it is ready to use.
english
6.
9
10
Byron BT – In-ear headset
6.2 Multi point setting
It is possible to connect and use 2 devices simultaneously.
Setting Multi point
• Please pair the Bluetooth in-ear headset to the first device
according to the pairing process (refer to pairing process).
• Turn off the Bluetooth in-ear headset.
• Press the MFB button for around 4 seconds until the blue LED is
continuously on.
• Please pair the Bluetooth in-ear headset to the 2nd device
according to the pairing process.
• Then, turn off the Bluetooth in-ear headset and turn on again, it
will be connected to two devices.
How to use Multi point
• At the status of connecting two devices, press the MFB button to
answer a call when there is an incoming call.
• At the status of connecting two devices, press the MFB button to
listen the music that was played lately.
6.3 Call
• Answering a call:
Press the MFB button to answer a call.
• Ending a call:
Press the MFB button briefly to end a call.
• Rejecting a call:
During an incoming call, press the MFB button for about
1 second.
• Converting a call:
During a call with mobile, press the MFB button to convert to the
headset (to call with the mobile again, use your mobile phone
menu).
• Volume control:
With the + and – buttons you can control the volume.
• Microphone Mute:
If you press the + or – button for about 1 second during a call,
the microphone will mute.
• During mute, it will be released, if you press the + or – button for
about 1 second.
• Depending on the mobile phone models, the above functions may
be different. Please refer to the mobile phone model.
Byron BT – In-ear headset
11
+
+
+
+
The purple LED will glow and the in-ear headset will be
initialised. After a factory reset, pair the in-ear headset again for
use.
6.5 Playing music
• To enjoy the best audio quality, please set 70~80% from the max.
volume in your device.
• On first purchasing, the volume sets in level 10 of all 15 levels
(please adjust with + or – button for volume).
Play / Pause: Press the MFB button briefly
Stop: Give the MFB button a long press
Volume up: Press the + button briefly
Volume down: Press the – button briefly
Next song: Give the + button a long press
Previous song: Give the – button a long press
There are several kinds of bit rate even though it is the same MP3 file. If
the file source is a higher bit rate (320 K) for listening, you can feel the
real worth for our Bluetooth headphone. And, if the speaker is not good
even with a good source, the sound quality will not be good, and if the
speaker is good with an inferior source, the sound quality is lost to the
listener. The Byron BT in-ear headset is optimised to supply you with a
high quality sound, but we also recommend you using a high resolution
source file (320K) to enjoy great sound.
7.
What does the LED colour mean?
Status
LED indication
Standby
Battery is running low
LED off (if you press the button, the blue
LED blinks once)
Red light blinks
Charging
Red light ON
Fully charged
Blue light ON
Pairing mode
Blue light ON
english
6.4 Factory reset
• Press the buttons in the following order:
Byron BT – In-ear headset
12
8.
FAQ & Troubleshooting
• I hear crackling noise
– For the best audio quality, always place your in-ear headset close to
the mobile phone.
•
–
–
–
I cannot hear anything
Increase the volume on the headphone.
Make sure that the in-ear headset is paired with the phone.
If the in-ear headset fails to connect when you pressed the MFB
button, try to connect again by following the pairing procedure.
• I have problems with pairing even though my phone indicates otherwise
– Please delete the in-ear headset paired to your mobile phone and pair
the in-ear headset again.
Please refer to set up “Pairing mode”.
• Will the Byron BT work with other Bluetooth equipment?
– The Byron BT is designed to work with Bluetooth mobile, computer or
portable audio devices which are built in. It can also work with other
Bluetooth devices that are compliant with Bluetooth version
1.1/1.2/2.0/2.1+EDR/3.0/4.0 and that support HSP, HFP, A2DP and
AVRCP.
• Is the enclosed charging cable only for a specified device?
– It is compatible with all standardised micro USB power supplies, and
in general, compatible with Android mobile phone charger.
9.
Maintenance
• Make sure the in-ear headset is turned off when storing, and protect it
safely when it is not in use.
• Sunlight and high temperatures can affect battery life of the Byron BT
and may be the cause of malfunction.
• High temperatures may also degrade performance.
• Do not expose the Byron BT in-ear headset to rain or other liquids.
• Prevent babies, children or pets to bite or suck the in-ear headset.
• Please do not disassemble.
• Please make sure to use certified power supplies (rated voltage: 5 V).
Byron BT – In-ear headset
13
The operation time may vary, depending on the connected device or setting
status.
11. Disposal
This symbol on the product, in the instructions or on the
packaging means that your electrical and electronic equipment should be disposed at the end of its life separately from
your household waste. There are separate collection systems
for recycling in the EU. For more information, please contact
the local authority or your retailer where you purchased the
product.
english
10. Specifications
Talk time . . . . . . . . . . . . . . . . . . . . up to 9 hrs
Music play time . . . . . . . . . . . . . . . up to 7.5 hrs
Standby time . . . . . . . . . . . . . . . . . up to 5 days
Charging time. . . . . . . . . . . . . . . . . about 2.0 hrs
Size. . . . . . . . . . . . . . . . . . . . . . . . 9.8 x 58 x 6.2 mm
Cable length. . . . . . . . . . . . . . . . . . 570 mm
Battery. . . . . . . . . . . . . . . . . . . . . . Rechargeable Lithium Polymer
Weight . . . . . . . . . . . . . . . . . . . . . . about 13 g
Operation range . . . . . . . . . . . . . . . within 10 m
Bluetooth profile . . . . . . . . . . . . . . . Headset profile
A2DP
AVRCP
SPP
Bluetooth profile . . . . . . . . . . . . . . . Ver. 4.1
Byron BT – In-ear headset
14
12. Battery disposal
This symbol means that according to local laws and
regulations your product and/or its battery shall be disposed
of separately from household waste. When this product
reaches its end of life, take it to a collection point designated
by local authorities. The separate collection and recycling of
your product and/or its battery at the time of disposal will
help conserve natural resources and ensure that it is recycled
in a manner that protects human health and the environment.
• Old batteries may contain substances that are harmful to your health
and environment.
• Dispose used batteries always according to the applicable disposal
regulations. Please do not throw used battery packs into the fire (danger
of explosion) or your household rubbish, take them to your local
collection points. The return is free and required by law. Please dispose
discharged batteries only.
• All batteries are recycled to reclaim valuable material such as iron,
zinc or nickel.
Byron BT – In-ear headset
15
FCC ID: UZCGBH-S3100
Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocte the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for
help.
CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
Made in Korea
In accordance with the R&TTE Directive 1999/5/EC.
14. Simplified EU Declaration of Conformity
Hereby, beyerdynamic declares that the radio equipment type Byron BT is
in compliance with the R&TTE Directive 1999/5/EC.
The full text of the EU declaration of conformity is available at the
following internet address:
http://www.beyerdynamic.com/cod
english
13. Certification
www.beyerdynamic.com
beyerdynamic GmbH & Co. KG . Theresienstraße 8 . 74072 Heilbronn . Germany
Tel. +49 7131 617-0 . Fax +49 7131 617-204 . info@beyerdynamic.de
For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Subject to change without notice.
EN 3 / Byron BT (09.16)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising