RadioRA 2 Tabletop Designer Keypads

RadioRA 2 Tabletop Designer Keypads
product specifications
369-222b
09.02.10
RadioRA 2 Tabletop Designer Keypads
RadioRA 2 Tabletop Designer Keypads provide
homeowners with a simple and elegant way
to operate lights, shade / draperies, motorized
screens, and many other devices.
RadioRA 2 Keypads feature large, easy-to-use
buttons, plus a unique backlit engraving option
that makes the Keypads readable any time
of the day or night. The Keypad buttons are
rounded, allowing engraving to be displayed at
an upward angle, increasing readability.
RR-T5RL
The versatile design of RadioRA 2 Tabletop
Designer Keypads allows them to be mounted
on a wall, placed on top of a table, or used
as a cordless Keypad. The Keypads can be
powered by the DC adapter provided with the
Keypad or with 2 AAA batteries.
Model Numbers
button with Raise /Lower,
5
All On and All Off.
RK-T5RL-XX*-E Engraved Replacement Kit.
RR-T10RL-XX*
10 button with Raise /
Lower, All On and All Off.
RK-T10RL-XX*-E Engraved Replacement Kit.
RR-T15RL-XX*
15 button with Raise /
Lower, All On and All Off.
RK-T15RL-XX*-E Engraved Replacement Kit.
RR-T5RL-XX*
RR-T10RL
*See Colors and Finishes below.
Colors and Finishes
RadioRA 2 Tabletop Designer Keypads are
available in 2 colors.
Snow
SW
RR-T15RL
Midnight
MN
www.lutron.com/radiora2
Lutron® | 1
product specifications
369-222b
09.02.10
RadioRA 2 Tabletop Designer Keypads
Specifications
Model Numbers
Keypads: RR-T5RL-XX, RR-T10RL-XX, RR-T15RL-XX
Replacement Kits: RK-T5RL-XX-E, RK-T10RL-XX-E, RK-T15RL-XX-E
Power
DC adapter:
60 Hz 6.5 W
Input: 120 V
300 mA
Output: 9 V
Battery powered: 2 AAA alkaline (included) 1.5 V each
Typical Power
Consumption
0.6 W
Test conditions: all backlights on medium intensity, nightlight mode
enabled , six LEDs on (two presets active per column), Keypad powered
adapter supplied.
by the 9 V
Regulatory Approvals
DC adapter: UL Listed for U.S. and Canada, NOM
Tabletop Keypad: FCC, IC, COFETEL
Environment
Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C),
0% to 90% humidity, non-condensing. Indoor use only.
Communications
Tabletop Designer Keypads communicate with the system through Radio
Frequency (RF) and must be located within 30 ft (9 m) of a repeater.
ESD protection
Tested to withstand electrostatic discharge without damage or memory
loss, in accordance with IEC 61000-4-2.
Surge Protection
Tested to withstand surge voltages without damage or loss of operation,
in accordance with IEEE C62.41-1991 Recommended Practice on
Surge Voltages in Low-Voltage AC Power Circuits.
Power Failure
Power failure memory: should DC or battery power be interrupted, the
Keypad will return to its previous state when power is restored.
Mounting
Mounting bracket included for optional wall mount applications.
Warranty
1 Year Limited Warranty. http://www.lutron.com/resiinfo
Design Features
At the press of a single button, lights fade ON
or OFF to desired levels and shades / draperies
open or close to desired positions.
•
Light levels and shade / drapery positions can
be fine-tuned by pressing and holding the
raise / lower buttons.
•
Programmable to select whole-house or singleroom preset levels or positions.
•
Adjustable backlight intensity.
• Prepaid engraving included. Redeemable for one
engraved button kit.
•
2 | Lutron®
Two “Wake-up” options for cordless
operation:
—“Wake-up and Activate” (default) - Single
button press will “wake up” and activate
selected button.
•
—“Wake-up Only” - Single button press will
“wake-up” and show status. Subsequent
press will activate button.
24/7 Technical Support—800.523.9466
product specifications
369-222b
09.02.10
RadioRA 2 Tabletop Designer Keypads
Dimensions
All dimensions are shown as in
(mm)
Keypad Side View
Keypad Front View
1
(25)
3 9⁄16
(91)
3 1⁄4
(82)
3/4
(18)
Mounting Bracket Side View
Mounting Bracket Front View
3 1⁄4
(82)
2
(51)
UP
3/8
(10)
3/8
(10)
2 15⁄16
(74)
5/8
(15)
www.lutron.com/radiora2
Lutron® | 3
product specifications
369-222b
09.02.10
RadioRA 2 Tabletop Designer Keypads
Wall Mounting (optional)
Attach mounting bracket to wall using the
supplied wall anchors and screws.
If using the DC adapter, wrap excess cord
around the cord holder and snap Keypad onto
the mounting bracket.
UP
Operation
Status LEDs
Show which Keypad button has been activated.
Keypad Buttons
Press to activate desired levels or positions.
All On Button
Turn all lights to full on and shades / draperies to open.
All Off Button
Turn all lights off and shades / draperies to closed.
Raise / Lower Buttons
Lights increase or decrease in intensity and
shades / draperies move towards the open or
close limit.
4 | Lutron®
24/7 Technical Support—800.523.9466
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising