19” RACK MOUNTED
19” CLOSE RACK & WALL RACK
19” WALL MOUNT RACK
º 19" Wall Mount Rack Design three compartment,
front, middle and rear.
º Material made of electro galvanized sheet steel
1.2mm.thickness, 100% rust-proof and durable.
º Mounting vertical frames support is electro
galvanized sheet steel 2mm. thickness, can be
adjustment as requirement Square mounting holes
in with extraordinary strength.
º The roof of rack can be install ventilating fan 1
ea. to 3 ea. Maximum.
º The front door is brown color transparency
plastic acrylic 5mm. thickness for lightweight. The seal on the edge to prevent dust. Security Locks is
turn lock.
º The side panel security with security lock is turn lock and perforated slot.
º The bottom rack has clip 10cm.x10cm. for cable and ventilation fan can additional (Option).
ºGround system all part of rack completed by cable earth kit.
ºProvide with M6 bolt cage nuts and plastic washers.
º Finish coat is Two-Tone with gray and back gray made of powder epoxy coating by electro-static
system for drying to enhance strength.
º Meet to with standard ANIS/EIA-310D-1992 (Rev.EIA-310-C), IEC 60297-1, IEC 60297-2, BS
5954:Part 2, DIN 41494.
º Manufacturing standard ISO 9001: 2000 Company.
U
1U=44.45mm.
Height (mm.)
H
600x400
600x500
600x600
6U
350
PW-6406
PW-6506
PW-6606
9U
485
PW-6409
PW-6509
PW-6609
12U
620
PW-6412
PW-6512
PW-6612
Kimtech Communication Co., Ltd.
Order NO. (Width* x Depth*:mm.)
Tel : 02-729-2747 Fax : 02-729-2745
1
19” CLOSE RACK & WALL RACK
AC Power Distribution
Specification
º Made from electro-galvanized sheet steel for
enhanced strength with Rustproof.
º Load current rate 15A 220VAC, 1 , 50Hz.
Prevent short circuit, over current By electronic
circuit breaker or Miniature circuit breaker
(Option) and Line Suppression. Withstanding
surge current 10 KA. Champing voltage 775 V.
º ON-OFF Status show by ON-OFF switch with
indicator light.
º Equipped with grounding system.
2
º Provided cable 2.5mm (14 AWG) 3C, 3 m. with plug with ground type.
º Receptacle (Outlet) is duplex universal type (L, N, G)
º Available in various size 6, 8, 12 and 20 Outlets strip (6 Outlets strip with a standard Length of 19"
rack can install on front horizontal of a Rack).
º Steel outlets strip design for use with P POWER C rack and general rack.
º Cable is UL E150631, Plug is UL E147650 standard.
º Strong and safety design for cable holding.
º Manufacturing standard ISO 9001: 2000 Company.
Order No.
Description
PA-6606
AC Power Distribution 6 Universal Outlets with, 3M.Cable
PA-6608
AC Power Distribution 8 Universal Outlets with, 3M.Cable
PA-6612
AC Power Distribution 12 Universal Outlets with, 3M.Cable
PA-6620
AC Power Distribution 20 Universal Outlets with, 3M.Cable
Kimtech Communication Co., Ltd.
Tel : 02-729-2747 Fax : 02-729-2745
2
19” CLOSE RACK & WALL RACK
Accessories Part
Kimtech Communication Co., Ltd.
Order No.
Description
CA-6601
Wire Management Panel
CA-6602
Cable Management Panel With Cover
RA-6603
Vertical Ring
BA-6601
Blank Panel 1U
BA-6602
Blank Panel 2U
BA-6603
Blank Panel 3U
BA-6604
Blank Panel 4U
BA-6605
Blank Panel 5U
BA-6606
Blank Panel 6U
NA-6601
Cage Nut
LA-6601
Lighting Set
GA-6645
Cassis Gide 2 PCS. 45 cm.
GA-6660
Cassis Gide 2 PCS. 60 cm.
JA-6601
Joint Kit
TA-6601
Cable Tray 7.5 cm.for Cable Run( 15U,27U.....45U)
Tel : 02-729-2747 Fax : 02-729-2745
3
19” CLOSE RACK & WALL RACK
Ventilating Fan Specification
º Rated Voltage 220/240 VAC 50/60 HZ or 48 VDC.
º Heavy-duty design and heavy duty operating.
º Rated Speed 2550 RPM.
3
º Air Flow 2.3 m /min.
º Operating Temperature +25 to +72 ºC
º Low noise
º Provided cable 1.5 m. with plug.
º Can be install on top and bottom and side panel of a Rack for
ventilation.
º Various models for 1-unit to 6-unit (1x4", 2x4", 3x4").
º Impellers have a diameter of 4 inches. Body frame is made from aluminum And Guard is
made from chromium steel.
º Safety UL/CSA Approvals.
Kimtech Communication Co., Ltd.
Order No.
Description
VA-6601
Ventilating Heavy Duty Fan 1x4" WITH PLATE
VA-6602
Ventilating Heavy Duty Fan 2x4" WITH PLATE
VA-6603
Ventilating Heavy Duty Fan 3x4" WITH PLATE
VA-6604
Ventilating Heavy Duty Fan 4x4" WITH PLATE
Tel : 02-729-2747 Fax : 02-729-2745
4
19” CLOSE RACK & WALL RACK
19" High Quality Export Rack
º 19" High Quality Export Rack Design and product
Modular knock down system. Which is very easy to
assemble remove the rack.
º Material made of electro galvanized sheet steel
1.5mm.thickness.Mounting Pole, Frame Structure and
Base made of 2.0mm. Caster stand made of 3.0mm.
steel 100% rust-proof and durable.
º The roof of rack can be install ventilating fan 1 ea. to 6
ea. Maximum (1x4", 2x4", 3x4"). It is transferred to be
vented raised roof cover (Option). Slide shutter for
cable can additional (Option).
º The inside of rack can be built the PL.7w. light and limit switch for automation lighting on-off when
open and close rear door (Option).
º The front door is brown color transparency plastic acrylic 5mm. thickness for lightweight, can be
change opened the door with right or left handle. The seal on the edge to prevent dust. Security Locks
is turn lock.
º The rear door has two key locked (27U up) and perforated ventilation with dust-proof filter, can be
change opened the door with right or left handle. The seal on the edge to prevent dust. Security Locks
is push lock.
º The bottom rack have slide shutter for cable and protection intrusion of animal. Ventilation fan can
additional (Option).
º The side panel security with security lock is turn lock can be quick release for install or maintenance.
º Mounting vertical frames support is electro galvanized sheet steel 2mm. thickness, can be
adjustment as requirement Square mounting holes in compliance with IEC297, DIN with extraordinary
strength.
º The hinged of front-rear door made from aluminum for heavy duty (Hardness and 100% rust-proof
finish).
º The rack include 4 adjustable level stand for easy install and 4 castors wheel for easy remove.
Caster made of white Nylon Six with equipped on the 360 degree swivel that allow to be moving
conveniently with capacity the static load 100 Kg./caster.
º Ground system all part of rack completed by cable earth kit.
º Provide with M6 bolt cage nuts and plastic washers.
º Finish coat is Two-Tone with gray and back gray made of powder epoxy coating by electro-static
system for drying to enhance strength.
º Meet to with standard ANIS/EIA-310D-1992 (Rev.EIA-310-C), IEC 60297-1, IEC 60297-2, BS
5954:Part 2, DIN 41494.
º Manufacturing standard ISO 9001: 2000 Company.
Kimtech Communication Co., Ltd.
Tel : 02-729-2747 Fax : 02-729-2745
5
19” CLOSE RACK & WALL RACK
U
1U=44.45mm.
Height (mm.)
Order NO. (Width* x Depth*:mm.)
H
600x600
600x800
600x900
600x1000
600x1100
15U
850
PM-6615
PM-6815
-
-
-
27U
1390
PM-6627
PM-6827
PM-6927
PM-6027
-
36U
1790
PM-6636
PM-6836
PM-6936
PM-6036
-
39U
1921
PM-6639
PM-6839
PM-6939
PM-6039
-
42U
2050
PM-6642
PM-6842
PM-6942
PM-6042
PM-6142
45U
2185
PM-6645
PM-6845
PM-6945
PM-6045
PM-6145
*Width=800mm. Please Contract Distribution
*Depth not include Front door and Rear door
Kimtech Communication Co., Ltd.
Tel : 02-729-2747 Fax : 02-729-2745
6
19” CLOSE RACK & WALL RACK
19" FAR Perforated Rack
º (FAR) 19" High Quality Export Server Rack Design and product
Modular knock down system. Which is very easy to assemble
remove the rack.
º Material made of electro galvanized sheet steel 1.5 mm.
thickness. Mounting Pole, Frame Structure and Base made of 2.0
mm. Caster stand made of 3.0 mm. steel 100% rust-proof and
durable.
º The roof of rack can be install ventilating fan 1 ea. to 6 ea.
Maximum (1x4", 2x4", 3x4"). It is transferred to be vented raised
roof cover (Option). Slide shutter for cable can additional (Option).
º The inside of rack can be built the PL.7w. light and limit switch
for automation lighting on-off when open and close rear
door(Option).
º The front door is laminated clear glass or acrylic with Perforated Vented along the door's edges, can
be change opened the door with right or left handle. The seal on the edge to prevent dust. Security
Locks is turn lock.
º The rear door has two key locked (27U up) and special perforated ventilation. can be change
opened the door with right or left handle. The seal on the edge to prevent dust. Security Locks is push
lock.
º The bottom rack have slide shutter for cable and protection intrusion of animal.Ventilation fan can
additional (Option).
º The side panel security with security lock is turn lock can be quick release for install or maintenance.
º Mounting vertical frames support is electro galvanized sheet steel 2mm. thickness, can be
adjustment as requirement Square mounting holes in compliance with IEC297, DIN with extraordinary
strength.
º The hinged of front-rear door made from aluminum for heavy duty (Hardness and 100% rust-proof
finish).
º The rack include 4 adjustable level stand for easy install and 4 castors wheel for easy remove.
Caster made of white Nylon Six with equipped on the 360 degree swivel that allow to be moving
conveniently with capacity the static load 100 Kg./caster.
º Ground system all part of rack completed by cable earth kit.
º Provide with M6 bolt cage nuts and plastic washers.
º Finish coat is Two-Tone with gray and black gray made of powder epoxy coating by electro-static
system for drying to enhance strength.
º Meet to with standard ANIS/EIA-310D-1992 (Rev.EIA-310-C), IEC 60297-1, IEC 60297-2, BS
5954:Part 2, DIN 41494
º Manufacturing standard ISO 9001: 2000 Company.
Kimtech Communication Co., Ltd.
Tel : 02-729-2747 Fax : 02-729-2745
7
19” CLOSE RACK & WALL RACK
U
1U=44.45mm.
Height (mm.)
Order NO. (Width* x Depth*:mm.)
H
600x600
600x800
600x900
600x1000
600x1100
15U
850
-
-
-
-
-
27U
1390
2FA2R-6627
2FA2R-6827
2FA2R-6927
-
-
36U
1790
-
-
-
-
-
39U
1921
-
-
-
-
-
42U
2050
2FA2R-6642
2FA2R-6842
2FA2R-6942
2FA2R-6042
2FA2R-6142
45U
2185
-
-
-
-
-
*Width=800mm. Please Contract Distribution
*Depth not include Front door and Rear door
Kimtech Communication Co., Ltd.
Tel : 02-729-2747 Fax : 02-729-2745
8
19” CLOSE RACK & WALL RACK
19" Extra Perforated Rack
º 19" Extra Perforated Rack Design and product Modular knock
down system. Which is very easy to assemble remove the rack.
º Material made of electro galvanized sheet steel
1.5mm.thickness.Mounting Pole, Frame Structure and Base
made of 2.0mm. Caster stand made of 3.0mm. steel 100% rustproof and durable.
º The roof of rack can be install ventilating fan 1 ea. to 6 ea.
Maximum (1x4", 2x4", 3x4"). It is vented raised roof cover. Slide
shutter for cable can additional (Option).
º The inside of rack can be built the PL.7w. light and limit switch
for automation lighting on-off when open and close rear
door(Option).
º The front door is laminated clear glass or acrylic with Perforated Vented along the door's edges and
Luxury silver bronze Swivel Handle lock or turn lock.
º The rear door has two key locked (27U up) and square or slot holes perforated ventilation if door's
area to prevent increase heat inside to extend the life of all network equipment and servers.
º The bottom rack have slide shutter for cable and protection intrusion of animal. Ventilation fan can
additional (Option).
º The side panel security with security lock is turn lock and Slide latch can be quick release for install
or maintenance.
º Mounting vertical frames support is electro galvanized sheet steel 2mm. thickness, can be
adjustment as requirement Square mounting holes in compliance with extraordinary strength.
º The hinged of front-rear door made from aluminum for heavy duty (Hardness and 100% rust-proof
finish). Without any interfering noise.
º Caster made of black or white Nylon Six with the diameter of 75 mm. equipped on the 360 degree
swivel that allow to be moving conveniently with capacity the static load 150 Kg./caster.
º Pedestal's base made of black ABS and can be freely adjustable to suit the slope and protect all
effect from static and earth leakage.
º Ground system all part of rack completed by cable 2.5 square mm. earth kit.
º Provide with M6 bolt cage nuts and plastic washers.
º Finish coat is Two-Tone with gray and black gray made of powder epoxy coating by electro-static
system for drying to enhance strength.
º Meet to with standard ANIS/EIA-310D-1992 (Rev.EIA-310-C), IEC 60297-1, IEC 60297-2, BS
5954:Part 2, DIN 41494
º Manufacturing standard ISO 9001: 2000 Company.
Kimtech Communication Co., Ltd.
Tel : 02-729-2747 Fax : 02-729-2745
9
19” CLOSE RACK & WALL RACK
U
1U=44.45mm.
Order NO. (Width* x Depth*:mm.)
Height (mm.)
H
600x600
600x800
15U
850
PE-6615
PE-6815
27U
1390
PE-6627
PE-6827
36U
1790
PE-6636
PE-6836
39U
1921
PE-6639
42U
2050
45U
2185
600x900
600x1000
600x1100
-
-
-
PE-6927
PE-6027
-
PE-6936
PE-6036
-
PE-6839
PE-6939
PE-6039
-
PE-6642
PE-6842
PE-6942
PE-6042
PE-6142
PE-6645
PE-6845
PE-6945
PE-6045
PE-6145
*Width=800mm. Please Contract Distribution
*Depth not include Front door and Rear door
Kimtech Communication Co., Ltd.
Tel : 02-729-2747 Fax : 02-729-2745
10
19” CLOSE RACK & WALL RACK
19" Open Rack
º 19" Open Rack Design and product Modular knock
down system. Which is very easy to assemble
remove the rack.
º Material made of electro galvanized sheet steel
2mm.thickness, 100% rust-proof and durable.
º Mounting vertical frames support is electro
galvanized sheet steel 2mm. thickness. Square
mounting holes with extraordinary strength.
º Mounting can be additional up to 3 sets.
º The rack include 4 adjustable level stand for easy
install and 4 castors wheel for easy remove. Caster
equipped on the 360 degree
swivel that allow to be moving conveniently with capacity the static load 100 Kg./caster.
º Ground system all part of rack completed by cable earth kit.
º Provide with M6 bolt cage nuts and plastic washers.
º Finish coat is powder epoxy coating by electro-static system for drying to enhance strength.
º Meet to with standard ANIS/EIA-310D-1992 (Rev.EIA-310-C), IEC 60297-1, IEC 60297-2, BS
5954:Part 2, DIN 41494.
º Manufacturing standard ISO 9001: 2000 Company.
U
1U=44.45mm.
Height (mm.)
Order NO.
H
Width 600 mm.
27U
1394
PO-6727
36U
1794
PO-6736
39U
1927
PO-6739
42U
2060
PO-6742
45U
2194
PO-6745
Kimtech Communication Co., Ltd.
Tel : 02-729-2747 Fax : 02-729-2745
11
19” CLOSE RACK & WALL RACK
ACCESSORIES
Shelve Specification
0 Made from electro-galvanized 1.5mm. Sheet steel for enhanced
strength with rust-proof.
0 Electrostatic plated ensuring 100% dust-proof.
0 Constructed as a fix shelve and slide shelve.
0 Can be fitted to 19" standard rack. (Close rack, Open rack and Wall
mount rack)
0 Available in a depth of 30 cm., (Wall Rack) 45 cm., (Open Rack) and
45cm., 60 cm., 65cm., 70 cm., 75cm., 80 cm., 85cm., 90cm., and 95
cm. depending on Close Rack depth.
0 Load test ensuring maximum at 100 kg. (Fix shelve) and 75 Kg.
(Slide shelve).The shelve and rack are not effected by weight.
0 Designed for securing nuts at all 4 corners for strength in supporting
equipment.
0 Option accessories are available for Wall Rack fitting or for securing
the front side at 2 corners.
0 Manufacturing standard ISO 9001: 2000 Company.
Order No.
Description
FA-6745
Fix Shelve 45 cm.depth (Open Rack)
SA-6745
Slide Shelve 45 cm. depth(Open Rack)
FA-6430
Fix Shelve 30 cm. depth(Wall Rack)
FA-6645
Fix Shelve 45 cm. depth
FA-6660
Fix Shelve 60 cm.depth
FA-6675
Fix Shelve 75 cm.depth
FA-6680
Fix Shelve 80 cm.depth
FA-6695
Fix Shelve 95 cm.depth
FA-6760
Fix Shelve 647x600 mm.depth
FA-6780
Fix Shelve 647x800 mm.depth
FA-6795
Fix Shelve 647x950 mm.depth
SA-6645
Slide Shelve 45 cm.depth
SA-6660
Slide Shelve 60 cm.depth
SA-6675
Slide Shelve 75 cm.depth
SA-6680
Slide Shelve 80 cm.depth
SA-6695
Slide Shelve 95 cm.depth
SA-6760
Slide Shelve 647x600 mm.depth
SA-6780
Slide Shelve 647x800 mm.depth
SA-6795
Slide Shelve 647x950 mm.depth
Kimtech Communication Co., Ltd.
Tel : 02-729-2747 Fax : 02-729-2745
12
19” CLOSE RACK & WALL RACK
Kimtech Communication Co., Ltd.
Tel : 02-729-2747 Fax : 02-729-2745
13
19” CLOSE RACK & WALL RACK
ETSI Open Rack
Part No.
Description
ETSI-19-1800
19" ETSI Open Rack 1800(H) x 552(W) x 300(D) mm
ETSI-19-2200
19" ETSI Open Rack 2200(H) x 552(W) x 300(D) mm
ETSI-21-1800
21" ETSI Open Rack 1800(H) x 600(W) x 300(D) mm
ETSI-21-2200
21" ETSI Open Rack 2200(H) x 600(W) x 300(D) mm
Kimtech Communication Co., Ltd.
Tel : 02-729-2747 Fax : 02-729-2745
14
19” CLOSE RACK & WALL RACK
19” OPEN RACK
PART NO.
DESCRIPTION
1918
19" Telecom Open Rack (1800H x 512W x 379D mm)
1920
19" Telecom Open Rack (2000H x 512W x 379D mm)
1922
19" Telecom Open Rack (2200H x 512W x 379D mm)
Kimtech Communication Co., Ltd.
Tel : 02-729-2747 Fax : 02-729-2745
15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising