Technical Overview: Keysight
Keysight Technologies
FieldFox Cable and Antenna Analyzers
4/6/6.5/9/14/18/26.5 GHz
Technical Overview
N9912A
N9913A
N9914A
N9915A
N9916A
N9917A
N9918A
Boost your readiness FieldFox
– Ready to sweep the line at power on
(CalReady)
Every piece of gear in your kit had to prove
its worth. Measuring up and earning a
spot is the driving idea behind Keysight
Technologies, Inc.’s FieldFox analyzers.
It starts with adaptability: every operating
mode is flexible enough to meet the needs
of novices and experts alike. To accelerate
your work, each mode has a task-driven
interface that saves time in the field. Best
of all, FieldFox is designed to withstand
your toughest working conditions.
– Working in the dusk or rain
– Screen is clearly viewable under direct
sunlight
– Easy file transfer between FieldFox
and PC
– Datalink Software provides simple and
easy reporting
FieldFox is ideal for performing cable and
antenna (CAT) measurements. Key CAT
measurements include:
– Future proof with software licensing
upgrade
– Distance-to-fault, return loss, VSWR,
and cable loss (1-port and 2-port)
– Integrated QuickCal - no calibration
kit required
– 4/6/6.5/9/14/18/26.5 GHz
Step up to FieldFox -- and achieve
more in the field.
-2-
Pick up FieldFox for its ergonomics
(N9912A 4/6 GHz)
Portrait design and
large buttons for easy
operation – even
with gloves on
Convenient side
strap makes it easy
to hold and carry
Anti-glare 6.5 inch
LCD display with
LED backlight
11.5”
(292 mm)
backlit keypad
Task-driven keys
are grouped to
easily perform field
measurements
Dedicated marker
keys for quick marker
function access
7.4”
(188 mm)
-3-
Pick up FieldFox for its ergonomics
N9913A/14A/15A/16A/17A/18A
Portrait design and
large buttons for easy
operation – even
with gloves on
Convenient side
strap makes it easy
to hold and carry
Anti-glare 6.5 inch
LCD display with
LED backlight
11.5”
(292 mm)
backlit keypad
Task-driven keys
are grouped to
easily perform field
measurements
Dedicated marker
keys for quick marker
function access
7.4”
(188 mm)
-4-
…and depend on its durability and convenience
TOP
Port 1/RF output
Quick connect shoulder
strap clips
Port 2/SA RF input
Get precise location using
the built-in GPS receiver
Connector bay protects
RF connectors
External reference and
external trigger input
RIGHT SIDE
LAN port for data transfer
and SCPI porgramming
Spectrum analyzer
25 MHz IF out usable
for signal analysis
SD flash card for
data storage
Keep going with
field-swappable
batteries that last
up to 3 1/2 hours
USB ports for easy
data storage
External reference and
external trigger output
Gasketed doors protect
ports from moisture
LEFT SIDE
Built-in DC supply for
powering external
bias-tees, probes, and
active devices
Simplify interference
analysis with AM/FM
tune and listen
-5-
Cable and antenna analyzer measurements
Cable and antenna analyzer
Fifty to sixty percent of microwave-link
equipment issues are related to cables,
antennas and connectors. Degraded feeder
lines cause poor coverage, link failures, and
reduced sensitivity on the receive path.
To maintain the quality of a RF/MW link,
it is critical to keep the cable and antenna
systems in good working condition.
Use FieldFox to make return loss, VSWR,
insertion loss, 1-port cable loss, and
distance-to-fault measurements. You can
test antennas, cables, filters, and amplifiers
with a single instrument. The amplifiers
can be biased using FieldFox’s built-in
DC source.
system degradation with specific faults in
the cable and antenna system. The built-in
cable editor allows you to edit existing
cable types on-site, and save them as new
cable types with user defined names.
Return loss/VSWR
measurements
Return loss /VSWR is the single most
important parameter to measure and
verify a cable and antenna system. This
measurement reflects the power transfer
efficiency of a given system. It combines
with the distance-to-fault measurement, to
help users quickly identify where the faulty
RF components are.
VSWR measurement
Distance to fault
When the return loss of any given feeder
line system, including the antenna, fails
to meet specification, the next step is
to find which part of the system failed.
The distance to fault measurement or
DTF is used to transfer frequency domain
measurements to distance domain. This
helps the user locate the discontinuity in
feeder line.
View and control the RL and DTF displays independently
FieldFox can make both return loss and
distance-to-fault measurements at the
same time. This helps you correlate overall
-6-
Cable and antenna measurements
Cable loss measurement (1-port)
Insertion loss
Waveguide measurements
If RF and microwave cables have been
installed on a tower or a building, like
a distributed antenna system (DAS), it
becomes difficult to measure cable loss
by accessing both ends of the cable
under test. FieldFox allows users to make
single-port cable-loss measurements with
higher accuracy close to the insertion
loss measurement and provides a higher
dynamic range for longer cables.
The insertion loss measurement
characterizes the loss of a jumper cable,
feeder cable, a connector, or an attenuator
if both ends are accessible. It can also
measure the filter type of devices like
diplexer, duplexer, tower mounted amplifier
(TMA), low noise amplifier (LNA) and bidirectional amplifier (BDA) etc. For amplifier
measurements, it measures gain instead of
loss of the device.
The Waveguides are widely used to
provide transmission links between
microwave transmitters and antennas, as
waveguides have less loss than coax. Due
to the dispersion nature of a waveguide,
it is always a challenge to figure out the
velocity factor (VF) of a particular type
of waveguide in DTF (distance-to-fault)
measurements. FieldFox can help you
automatically calculate waveguide VF when
the waveguide type is chosen.
One-port cable loss measurement
Insertion loss display
FieldFox’s waveguide distance-to-fault measurement
-7-
Calibration
CalReady – calibrated at power
on, ready to go
Broadband Cal
FieldFox allows you to make broadband
calibrations, which means the instrument
is calibrated over the maximum frequency
range. After a broadband calibration,
you can change the frequency range or
number of points without recalibrating the
instrument. The calibration is interpolated,
and accuracy is maintained.
Save time and get right to work with
FieldFox’s CalReady feature. With CalReady,
the analyzer is already calibrated and ready
to make measurements such as return
loss, VSWR, 1-port cable loss, and DTF
measurements without having to connect/
disconnect additional calibration devices.
Hassle-free calibration in the
ield with the industry’s irst and
only QuickCal
FieldFox is the industry’s first and only
handheld network analyzer with a built-in
calibration capability that allows you to
calibrate the network analyzer without
carrying a calibration kit (cal kit) into the
field. With any other test instrument, when
you add additional devices to the test port,
such as jumper cables or adapters, you
need to recalibrate using a cal kit. QuickCal
eliminates the need to carry and use a cal
kit, and also provides worry-free accuracy.
STEP 1
FieldFox’s QuickCal allows you to perform
calibrations without carrying a cal kit
Fast and accurate calibration
with ECal
The FieldFox calibration engine supports
Keysight’s USB ECal modules. ECal support
reduces calibration time and the need to
make multiple connections during testing,
while also providing for greater consistency
between measurements. For FieldFox
users, that translates into fewer human
errors and increased accuracy.
Waveguide calibration
STEP 2
Keysight offers both high-performance and
also economical waveguide calibration kits.
The economical kits (N9911X) are ideal for
field maintenance and troubleshooting, as
they provide good measurement results at
lower costs.
FieldFox’s QuickCal supports measurements
such as insertion loss/gain, 1-port cable
loss, return loss, and DTF.
Mechanical calibration
FieldFox supports a wide selection of
mechanical calibration kits, such as T cal
kits for various frequency ranges. You also
can input your own calibration kit using
FieldFox’s Datalink software.
STEP 3
-8-
Keysight N9911x economical
waveguide calibration kits
Designed for you and the work you do everyday
Carry FieldFox wherever you need
to go
–
Kit friendly 3.0 kg or 6.6 lbs
–
Large buttons are easy to operate, even
when wearing gloves
–
Field swappable battery lasts up to
4 hours
–
Non-slip rubber grip securely fits in your
hands and won’t slide off the hood of
your vehicle
–
Vertical “portrait” orientation makes it
easy to hold and operate at the same time
Rugged enough to meet MIL-specs Translective display and backlit
key
– Completely sealed instrument enclosure
provides measurement stability in harsh
environments
–
Specially designed connector bay protects
RF connectors from damage due to drops
or other external impacts (designed to
withstand 4’ drop on concrete surface on
all 6 faces)
–
Water-resistant chassis, keypad and case
withstand wide temperature ranges and
salty, humid environments
–
Case withstands shock and vibration
–
Wide operating temperature –10 to +55 °C
(14 to 131 °F)
–
Wide storage temperature –51 to +71 °C
(–60 to 160 °F)
–
Meets MIL-PRF-28800F Class 2
requirements
–
Type tested and meets MIL-STD-810G,
Method 511.5, Procedure I requirements
for operation in explosive environments
–
Meets IEC/EN 60529 IP53 requirements
for protection from dust and water
Modern connectivity
Large buttons make it easy to perform spectrum
analysis measurements – even with gloves on
–
Two USB 2.0 ports can be used for data
transfer, USB power sensor support, USB
keyboard and mouse support
–
LAN port: used for SCPI programming,
FieldFox Datalink software connection,
and remote control via iOS device
–
SD flash card slot: use as a data storage
device
-9-
The display is designed for easy viewing in
indoor and outdoor settings and in direct
sunlight and darkness. You can also access
different display modes via softkeys.
Transflective display makes it easy to read
measurements in direct sunlight
Remote control capability with
iPad or iPhone
Engineers and technicians can now
remotely monitor and control their FieldFox
using their iOS device such as an iPhone,
iPad, or iPod Touch. FieldFox’s Remote
Viewer iOS app emulates the front panel
of the unit, so users can simply press any
FieldFox key right from their iOS device.
The app also allows users to instantly access
technical documents such as data sheets.
Marker and limit lines
FieldFox provides six markers with
marker table and limit lines to facilitate
measurements. Limit lines or masks can be
used for quick pass/fail testing of devices
or frequency spectrums. FieldFox allows
you to define fixed and relative limit lines,
for both the RF spectrum traces and cable
and antenna test. Additionally, with a single
key press, you can build a limit line table
from a current trace, and add offsets or
margins to simplify your testing process.
USB keyboard and mouse
support
USB keyboard support to make file naming
and saving easy
FieldFox supports USB keyboard and mouse
to make text input in the field much easier,
like naming files.
FieldFox with USB keyboard and mouse for easy file
naming
FieldFox Datalink software
Control and view your FieldFox via your iPad
Flexible ile system, and ile
transfer
FieldFox adopts the same file system used
in any Windows PC. There is no length
limitation on file names, you can enter a
file name either using a virtual keyboard, or
external USB keyboard. Files can be copied
to an external USB and SD card, or you can
save the files directly to USB and SD flash
card too.
Use limit lines or markers to perform spectrum
conformance tests
FieldFox’s Data Link software makes report
generation and documentation easier
Cable iles
FieldFox supports an extensive list of cables
from various cable manufacturers. To get
accurate results for DTF measurements, just
simply recall the cable to match a feeder
cable under test. In case a cable is not listed
on the FieldFox cable selection list, you can
take one existing cable and modify it, and
re-save it as user defined cable.
- 10 -
Use the complimentary Data Link software to generate
reports
Comparison table of FieldFox RF analyzer and FieldFox Microwave analyzers
FieldFox
RF analyzer N9912A
Microwave analyzers
N9913/14/15/16/17/18A
Maximum frequency range
4/6 GHz
4, 6.5, 9, 14,18, 26.5 GHz
Cable and antenna analyzer
Standard
Standard
Insertion loss/transmission
measurement
Option 110
Option 210
1-port vector, 2-port scalar Option 303
Full 2-port support
Option 230 or 231
Option 233
Interference analysis
Option 236
Option 236
Independent source
Option 230 or 231
Option 233
Built-in power meter
Option 311
Option 310
USB power sensor support
Option 302
Option 302
Pulse measurement
Option 330
Option 330
Remote control using iOS device
Option 030
Option 030
Vector network analysis
Spectrum analysis
Built-in DC source
Built-in GPS
Option 309
External USB GPS support
- 11 -
Option 307
Conigurations
N9912A cable and antenna analyzer
FieldFox RF analyzer base functions:
One-port cable and antenna analyzer (4 GHz), broadband calibration, CalReady, standard
mechanical cal kit support. Measurements include: return loss, distance-to-fault (DTF), one
port cable loss and VSWR.
Standard accessories included N9912A:
AC/DC adapter; battery; soft carrying case comes with backpack and shoulder straps, Quick
Reference Guide, and User’s Guide.
N9912A FieldFox Options
Option 104 4 GHz cable and antenna analyzer
Option 106 6 GHz cable and antenna analyzer
Upgradable software options for N9912A
Qption 110 Transmission measurement (for insertion loss, filter and amplifier test)
Option 111 QuickCal
Option 230 4 GHz spectrum analyzer (requires Option 104)
Option 231 6 GHz spectrum analyzer (requires Option 106)
Option 235 Preampliier for spectrum analyzer (requires Option 230 or 231)
Option 236 Interference analyzer
Option 302 External USB power sensor support
Option 303 Network analysis capability
Option 308 Vector voltmeter
Option 010 Network analyzer time domain
Option 311 Channel power meter
Option 030 Remote control capability (from iOS device)
Option 330 Pulse measurements (requires USB peak power sensor)
- 12 -
Conigurations
N9913/14/15/16/17/18A microwave cable and antenna analyzers
FieldFox microwave analyzer
N9913/14/15/16/17/18A base
functions:
One port cable and antenna analyzer (4 GHz), broadband calibration, CalReady, standard mechanical
cal kit support. Measurements include: return loss, distance-to-fault (DTF), one port cable loss and
VSWR.
Standard accessories included
N9913/14/15/16/17/18A:
AC/DC adapter, battery, soft carrying case comes with backpack and shoulder straps, Quick
Reference Guide, and User’s Guide.
N9913A FieldFox RF combination analyzer, 4 GHz, cable and antenna analyzer
N9914A FieldFox RF combination analyzer, 6.5 GHz , cable and antenna analyzer
N9915A FieldFox microwave combination analyzer, 9 GHz , cable and antenna analyzer
N9916A FieldFox microwave combination analyzer, 14 GHz , cable and antenna analyzer
N9917A FieldFox microwave combination analyzer, 18 GHz , cable and antenna analyzer
N9918A FieldFox microwave combination analyzer, 26.5 GHz 3.5 mm (m) connector, cable and antenna analyzer
N9913/14/15/16/17/18A base unit is cable and antenna analyzer
Upgradable software options
Option 112
QuickCal calibration without using external calibration kit
Option 210
Vector network analyzer – transmission and reflection
Option 211
Vector network analyzer – full 2-port S-parameters (requires Option 210)
Option 010
Vector network analyzer time domain (requires Option 210, recommend 211)
Option 233
Spectrum analyzer
Option 235
Preamplier (requires Option 233)
Option 236
Interference analyzer and spectrogram (requires Option 233)
Option 238
Spectrum analyzer time gating (requires Option 233)
Option 302
External USB power sensor support (requires Keysight U2000 series power sensor)
Option 307
GPS receiver (receiver built-in, external antenna required)
Option 308
Vector voltmeter (for A/B and B/A, requires Option 210 and Option 211)
Option 309
DC bias variable-voltage source
Option 310
Built-in power meter
Option 330
Pulse measurements (requires Keysight USB peak power sensor)
Option 030
Remote control capability (remote viewing and control using iPhone, iPad or iPod Touch)
- 13 -
Accessories list
N9910X RF/MW handheld analyzer accessories
N9910X-700
Rugged phase-stable cable, Type-N (m) to Type-N (f), 18 GHz, 3.28 ft or 1 m
N9910X-701
Rugged phase-stable cable, Type-N (m) to Type-N (m), 18 GHz, 3.28 ft or 1 m
N9910X-704
Rugged phase-stable cable, Type-N (m) to TNC (f), 13 GHz, 5 ft or 1.5 m
N9910X-705
Rugged phase-stable cable, Type-N (m) to TNC (m), 13 GHz, 5 ft or 1.5 m
N9910X-708
Rugged phase-stable cable, 3.5 mm (m) to 3.5 mm (f), 26.5 GHz, 3.28 ft or 1 m
N9910X-709
Rugged phase-stable cable, 3.5 mm (f) to 3.5 mm (f), 26.5 GHz, 3.28 ft or 1 m
N9910X-712
Trigger/Reference-In Cable, SMA (m) to BNC (f), 1 m or 3.28 ft
N9910X-713
Bias-tee power cable, SMB (f) to BNC (m), 1 m or 3.28 ft
N9910X-800
T-Calibration kit, 3-in-1, open, short, load, DC to 6 GHz, Type-N (m), 50 ohm
N9910X-801
T-Calibration kit, 3-in-1, open, short, load, DC to 6 GHz, Type-N (f), 50 ohm
N9910X-802
T-Calibration kit, 3-in-1, open, short, load, DC to 6 GHz, 7/16 DIN (m)
N9910X-803
T-Calibration kit, 3-in-1, open, short, load, DC to 6 GHz, 7/16 DIN (f)
N9910X-810
Rugged phase-stable cable, Type-N (m) to Type-N (m), 5 ft or 1.5 m
N9910X-811
Rugged phase-stable cable, Type-N (m) to Type-N (f), 5 ft or 1.5 m
N9910X-812
Rugged phase-stable cable, Type-N (m) to Type-N (m), 12 ft or 3.6 m
N9910X-813
Rugged phase-stable cable, Type-N (m) to Type-N (f), 12 ft or 3.6 m
N9910X-815
Rugged phase-stable cable, Type-N (m) to 7/16 (m), 12 ft or 3.6 m
N9910X-817
Rugged phase-stable cable, Type-N (m) to Type-N (m), 3.28 ft or 1 m
N9910X-820
Antenna, directional, multiband, 800 to 2500 MHz, 10 dBi
N9910X-821
Antenna, telescopic whip, 70 MHz to 1 GHz
N9910X-823
Antenna, cellular narrowband, 824 to 869 MHz
N9910X-824
Antenna, cellular narrowband, PCS 1850 to 1990 MHz
N9910X-825
Antenna, GPS, active
N9910X-843
Coaxial adapter, Type-N (m) to 7/16 DIN (f)
N9910X-845
Adapter kit - Type-N (f) to 7/16 (f),Type-N (f) to 7/16 (m),Type-N (f) to Type-N (f)
N9910X-846
Coaxial adapter, 50 ohm type-N (m) to 75 ohm type-N (f)
N9910X-847
Adapter kit, Type-N (f) to TNC (m) adapter, Type-N (f) to TNC (f) adapter, 13 GHz
N9910X-848
Coaxial adapter, Type-N (f) to 3.5 mm (f), 18 GHz
N9910X-849
Coaxial adapter, Type-N (f) to 3.5 mm (m), 18 GHz
N9910X-850
Coaxial adapter, Type-N (m) to Type-N (m), 18 GHz
N9910X-851
Coaxial adapter, Type-N (f) to Type-N (f), 18 GHz
N9910X-852
Coaxial adapter, Type-N (m) to Type-N (f), 18 GHz
N9910X-860
Fixed attenuator, 40 dB, 100 W, DC-3 GHz, Type-N (m) to Type-N (f)
N9910X-861
Fixed attenuator, 40 dB, 50 W, DC-8.5 GHz, Type-N (m) to Type-N (f)
N9910X-870
Extra battery
- 14 -
N9910X RF/MW handheld analyzer accessories continued
N9910X-873
AC/DC adapter
N9910X-874
External bias-tee, 2.5 MHz to 6 GHz, 1 W, 0.5 A
N9910X-875
DC charger and adapter
N9910X-880
Extra soft carrying case with backpack and shoulder strap
N9910X-881
Hard transit case
85514A
Calibration kit, 4-in-1, open, short, load and through, DC to 9 GHz, Type-N (m), 50 ohm
85515A
Calibration kit, 4-in-1, open, short, load and through, DC to 9 GHz, Type-N (f), 50 ohm
85518A
Calibration kit, 4-in-1, open, short, load and through, DC to 18 GHz, Type-N (m), 50 ohm
85519A
Calibration kit, 4-in-1, open, short, load and through, DC to 18 GHz, Type-N (f), 50 ohm
85520A
Calibration kit, 4-in-1, open, short, load and through, DC to 26.5 GHz, 3.5 mm (m)
85521A
Calibration kit, 4-in-1, open, short, load and through, DC to 26.5 GHz, 3.5 mm (f)
N9911X economical waveguide calibration components
N9911X-110
Waveguide to coaxial adapter, calibration grade, WR-137 to Type-N (m), metric flange, 5.38 to 8.18 GHz
N9911X-111
Termination, calibration grade, WR-137, metric flange, 5.38 to 8.18 GHz
N9911X-112
Flush short, calibration grade, WR-137, metric flange, 5.38 to 8.18 GHz
N9911X-113
1/4 wavelength offset, calibration grade, WR-137, metric flange, 5.38 to 8.18 GHz
N9911X-114
Coupling set for WR-137, metric flange, 5.38 to 8.18 GHz
N9911X-115
Waveguide to coaxial adapter, calibration grade, WR-137 to Type-N (m), imperial flange, 5.38 to 8.18 GHz
N9911X-116
Termination, calibration grade, WR-137, imperial flange, 5.38 to 8.18 GHz
N9911X-117
Flush short, calibration grade, WR-137, imperial flange, 5.38 to 8.18 GHz
N9911X-119
Coupling set for WR-137, imperial flange, 5.38 to 8.18 GHz
N9911X-210
Waveguide to coaxial adapter, calibration grade, WR-90 to Type-N (m), metric flange, 8.2 to 12.5 GHz
N9911X-211
Termination, calibration grade, WR-90, metric flange, 8.2 to 12.5 GHz
N9911X-212
Flush short, calibration grade, WR-90, metric flange, 8.2 to 12.5 GHz
N9911X-213
1/4 wavelength offset, calibration grade, WR-90, metric flange, 8.2 to 12.5 GHz
N9911X-214
Coupling set for WR-90, metric flange, 8.2 to 12.5 GHz
N9911X-215
Waveguide to coaxial adapter, calibration grade, WR-90 to Type-N (m), imperial flange, 8.2 to 12.5 GHz
N9911X-216
Termination, calibration grade, WR-90, imperial flange, 8.2 to 12.5 GHz
N9911X-217
Flush short, calibration grade, WR-90, imperial flange, 8.2 to 12.5 GHz
N9911X-218
1/4 wavelength offset, calibration grade, WR-90, imperial flange, 8.2 to 12.5 GHz
N9911X-219
Coupling set for WR-90, imperial flange, 8.2 to 12.5 GHz
N9911X-310
Waveguide to coaxial adapter, calibration grade, WR-62 to Type-N (m), metric flange, 11.9 to 18 GHz
N9911X-311
Termination, calibration grade, WR-62, metric flange, 11.9 to 18 GHz
N9911X-313
1/4 wavelength offset, calibration grade, WR-62, metric flange, 11.9 to 18 GHz
N9911X-314
Coupling set for WR-62, metric flange, 11.9 to 18 GHz
N9911X-315
Waveguide to coaxial adapter, calibration grade, WR-62 to Type-N (m), imperial flange, 11.9 to 18 GHz
N9911X-316
Termination, calibration grade, WR-62, imperial flange, 11.9 to 18 GHz
- 15 -
N9911X economical waveguide calibration components continued
N9911X-317
Flush short, calibration grade, WR-62, imperial flange, 11.9 to 18 GHz
N9911X-318
1/4 wavelength offset, calibration grade, WR-62, imperial flange, 11.9 to 18 GHz
N9911X-319
Coupling set for WR-62, imperial flange, 11.9 to 18 GHz
N9911X-410
Waveguide to coaxial adapter, calibration grade, WR-42 to 3.5 mm (m), metric flange, 17.6 to 26.7 GHz
N9911X-411
Termination, calibration grade, WR-42, metric flange, 17.6 to 26.7 GHz
N9911X-412
Flush short, calibration grade, WR-42, metric flange, 17.6 to 26.7 GHz
N9911X-414
Coupling set for WR-42, metric flange, 17.6 to 26.7 GHz
N9911X-415
Waveguide to coaxial adapter, calibration grade, WR-42 to 3.5 mm (m), imperial flange, 17.6 to 26.7 GHz
N9911X-416
Termination, calibration grade, WR-42, imperial flange, 17.6 to 26.7 GHz
N9911X-417
Flush short, calibration grade, WR-42, imperial flange, 17.6 to 26.7 GHz
N9911X-418
1/4 wavelength offset, calibration grade, WR-42, imperial flange, 17.6 to 26.7 GHz
N9911X-419
Coupling set for WR-42, imperial flange, 17.6 to 26.7 GHz
Antenna, N9910X-821
Bias-tees, N9910X-874
Directional antenna, N9910X-820
Phase stable cable, N9910X-810
85514A
DC car charger and adapter,
N9910X-875
85515A
100 Watt attenuator, N9910X-860
T-Cal kits
Adapter kit, N9910X-845
N9910X-800
N9910X-801
- 16 -
N9910X-802
N9910X-803
Soft carrying case with backpack and shoulder straps included with a standard N9912A. For
an extra soft carrying case order N9910X-880
Hard transit case, N9910X-881
AC/DC adapter, N9910X-873
FieldFox fits inside hard transit case
External battery charger,
N9910X-872
- 17 -
18 | Keysight | FieldFox Cable and Antenna Analyzers - Technical Overivew
Boost your readiness.
Every piece of gear in your field kit had to prove its worth. Measuring up and earning
a spot is the driving idea behind Keysight’s FieldFox microwave analyzers. They’re
equipped to handle routine maintenance, in-depth troubleshooting and anything in
between. Better yet, FieldFox delivers Keysight-quality microwave measurements wherever you need to go. Add FieldFox to your kit and carry precision with you.
Related literature
Number
FieldFox Handheld Analyzers, Brochure
5990-9779EN
FieldFox Spectrum Analyzers, Technical Overview
5990-9782EN
FieldFox Vector Network Analyzers, Technical Overview
5990-9781EN
FieldFox Handheld Analyzers, Data Sheet
5990-9783EN
FieldFox Handheld Analyzer, Configuration Guide
5990-9836EN
FieldFox N9912A RF Analyzer, Technical Overview
5989-8618EN
FieldFox N9912A RF Analyzer, Data Sheet
N9912-90006
FieldFox N9923A RF Vector Network Analyzer, Technical Overview
5990-5087EN
FieldFox N9923A RF Vector Network Analyzer, Data Sheet
5990-5363EN
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s commitment to superior product quality and lower total cost
of ownership. The only test and measurement company with three-year
warranty standard on all instruments, worldwide.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to five years of protection and no budgetary surprises to ensure your
instruments are operating to specification so you can rely on accurate
measurements.
www.keysight.com/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2008
Quality Management System
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Asia Paciic
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 112 929
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
Spain
Sweden
Switzerland
United Kingdom
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
0800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-07-10-14)
Download application notes, watch videos, and learn more:
www.keysight.com/find/FieldFox
This information is subject to change without notice.
© Keysight Technologies, 2014
Published in USA, August 4, 2014
5991-4453EN
www.keysight.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising