digital quartz superheterodyne radio controls with rolling codes

digital quartz superheterodyne radio controls with rolling codes
S486
ELECTRONICS
DIGITAL QUARTZ SUPERHETERODYNE RADIO
CONTROLS WITH ROLLING CODES
868 MHz “FM” “ROLLING CODE”
266 CODE COMBINATIONS
MEMORISATION VIA RADIO
ANTENNA ANQ800-1
AVAILABLE CHANNELS 1-4
RANGE 100 - 150 m
MORE THAN 268 MILLION PRE-CODED TRANSMITTER CODES (228)
An innovative radio control system that has gathered together a series of
specific appliances under a single working protocol aimed at the remote
control of automatic and security installations.
High-technology appliances, protected by robust and practical containers,
easy to install and pleasing on the eye in the usual style of Cardin products.
Solutions for all possible uses: control of automatic installations for gates
and doors, the command and control of automatic rolling shutters and
sun blinds, the activation of alarm and access control systems as well as
the activation of all ON-OFF or TIMER-CONTROLLED systems. Adopting the
S486 as a command and control system for remote controlled installations,
automatic gates and doors and security systems, doesn’t just offer high
levels of efficiency but also provides practicality for the user and an extremely
useful and manageable appliance for the installer. A complete and secure
system, the best today’s technology has to offer, which has been designed and
realised with the quality and attention to detail that only CARDIN products
can provide.
The “key” to the system is the “simply unique” set of transmitters, made of
anti-scratch, shockproof materials that are compact and easy to use. They
are available in the following versions: pocket size with 1-2-3-4 channels
and wall mounted with four available functions working from a fixed position.
The single button radio controls (1 channel) are suitable for alarm systems
and access control. The practical and efficient three button radio controls
specially designed to command rolling shutters and sun blinds allow the
functions open, close and stop to be immediately identified.
A clip is available allowing the insertion of a transponder into the transmitter
unit.
SELF-LEARNING
86
MEMO RADIO - KEY LOCK
ERGONOMIC BUTTONS
TXQ486400
COMPACT CASE
LITHIUM BATTERY
S486
PRODUCT DESCRIPTION
ORDER NR.
TRANSMITTERS
Container in shockproof plastic material.
3V lithium battery power supply CR2032.
Lots of 10 pieces
Overall dimensions 34 x 72 x 11
1-CHANNEL TRANSMITTER
TXQ486100
2-CHANNEL TRANSMITTER
TXQ486200
3-CHANNEL TRANSMITTER
TXQ486300
4-CHANNEL TRANSMITTER
TXQ486400
2-CHANNEL PRECODED TRANSMITTER *
TXQ4862P0
4-CHANNEL PRECODED TRANSMITTER *
TXQ4864P0
* Minimum lots of 500 pieces.
4-CHANNEL TRANSMITTER
TXQ48640M
Container in shockproof plastic material.
3V lithium battery power supply CR2032.
Wall mounting.
Lots of 5 pieces
Overall dimensions 72 x 72 x 15
NUMERICAL CODE KEYPAD VIA RADIO
SSB-T8K4
Container in shockproof polycarbonate IP57.
6 V lithium battery power supply 2 x CR2032
(KITSSB-T9K4-1).
Number of code available combinations: 1.000.000.
Possibility of memorising up to 250 user codes.
Manages up to 4 distinct functions and communicates with all
S486 standard receivers.
Lots of 5 pieces
Overall dimensions 72 x 115 x 28
87
S486
ELECTRONICS
DIGITAL QUARTZ SUPERHETERODYNE RADIO
CONTROLS WITH ROLLING CODES
RECEIVERS
The receivers are available in all the classic Cardin versions: outdoor receivers 12-24V. with
display, with LCD display and GSM functions, 230V radio programmers in watertight cases
with flip up access covers, multiprotocol interface decoding in indoor boxes, mini receiver
units to be installed in appliances which already have a protective casing and slot-in
receiver cards for direct insertion into host appliances designed to receive them.
- outdoor receiver with LCD display and GSM functions,
- outdoor receivers,
- outdoor receiver with display,
- outdoor radio programmer,
- 2-channel mini receiver,
- 2-channel slot-in receiver cards.
RQM486200
Box in ABS for internal
use IP20
MINI TWO-CHANNEL RECEIVER
The mini receiver housed in an indoor container and is fitted with an 10-way terminal
board.
Overall dimensions 95 x 75 x 25
The receiver cards are fitted with two relays the outputs of which are marked CH1 (N.O.
contact) and CH2 (N.O./N.C. contact). The relays CH1 and CH2 can be activated by
selecting the functions A-B-C-D and made to correspond with the transmitter channels
CHA-CHB-CHC-CHD by setting the jumpers situated on the circuit board.
The memorization via radio function allows extra transmitters to be added to the system
without having to access the circuit board but instead by using the MEMO Radio button
in a previously memorised transmitter in the vicinity of the receiver.
Channel selection jumper
Memorizing ulterior channels
via radio
868 MHz, FM RF module
2 outputs with impulse contact
Power supply 12/24 Vac/dc
88
Extractable memory module 300 codes
ANQ800-1 aerial connection
S486
PRODUCT DESCRIPTION
GSM-GPRS RECEIVER WITH LCD DISPLAY (12/24 Vac-dc)
ORDER NR.
RCQ486GSM
All weather box in ABS - IP55
The receiver can be fitted with up to four programmable relay modules
(impulsive, ON-OFF or TIMER-CONTROLLED).
Possibility of memorising up to 3000 codes
USB connection and GSM-GPRS module for remote user and activation of
the output relays.
Overall dimensions 135 x 175 x 85
MODEM FOR GSM RECEIVER WITH DISPLAY
MGSMGL611OUSB
The modem allows the installation to be remotely connected via the software
PGM449SW supplied with the receiver or downloadable free of charge from the
Cardin website.
OUTDOOR RECEIVER (12/24 Vac-dc)
RCQ486100
All weather box in ABS - IP44
The unit can be fitted with up to four interchangeable relay modules
N.O. or N.C.
1 relay inserted.
Possibility of memorising up to 300 codes.
Lots of 5 pieces
Overall dimensions 110 x 110 x 33
OUTDOOR RECEIVER WITH DISPLAY (12/24 Vac-dc)
RCQ486D00
All weather box in ABS - IP44
The receiver can be fitted with up to four programmable relay modules
(impulsive, ON-OFF or TIMER-CONTROLLED).
Possibility of memorising up to 1000 codes.
Lots of 5 pieces
Overall dimensions 110 x 110 x 33
2-CHANNEL MINI RECEIVER (12/24 Vac-dc)
RQM486200
Electronic circuit with a 10-way terminal block; Indoor box IP20.
Supplied with 2 impulsive relays.
Possibility of memorising up to 300 codes.
Lots of 5 pieces
Overall dimensions 95 x 75 x 25
2-CHANNEL SLOT-IN RECEIVER CARD (24 Vac-dc)
RSQ486200
Receiver card for direct insertion into a host appliance designed to receive it.
Supplied with 2 impulsive relays.
Possibility of memorising up to 300 codes.
Lots of 5 pieces
Overall dimensions 70 x 52 x 20
QUARTZ RECEIVER MODULE 868 MHZ
Superheterodyne in FM with a digital filter.
RF module without decoder suitable for receiving and transmitting digital
signals.
Voltage: 5 Vdc - Electrical input: 15 mA
Overall dimensions 40 x 20 x 13
YRF868QFMDG0
89
S486
PRODUCT DESCRIPTION
ORDER NR.
RADIOPROGRAMMERS FOR ROLLING GRILLS (600 W)
RPQ486
All weather box in ABS - IP55
Power supply 230 Vac.
Lots of 5 pieces
Overall dimensions 139 x 115 x 44
Logic integrated into the receiver and output for the control of one motor. Power supply
output for a pair of Cardin photoelectric cells.
Possibility of memorising up to 20 transmitters.
HAND-HELD PDA PROGRAMMER
PGM486
User code programming system that can be interfaced with a personal computer.
It allows you to manage transmitter codes in the receivers memory without having
to activate the transmitters one by one. The transmitters pre-coded in blocks can be
memorised rapidly in multi-user systems which require the use of many transmitters. You
can manage the replacement of a transmitter lost by the user using remote programming.
Complete with interface cables, external power unit and CD-ROM software.
TECHNICAL DATA
Carrier frequency
Internal power supply (battery)
External power supply
Illuminated background display
Maximum number of reserved KEY449 codes
868 MHz
9 Vdc
12 Vac-dc
16 characters x 4 lines
2000
RESERVED CODE PROGRAMMING KEY
KEY449
KEY449, when connected to the PC management software, expands the work capacity of the
palm system by remotely adding one or more transmitters to the system.
MULTIPROTOCOL INTERFACE
RCQ486W00
The interface is able to decode a radio frequency signal coming from a Cardin S486
transmitter or via cable from a DKS250T and output a Wiegand/ISO-3554 and RS232
digital signal, containing the transmitter code, in 13 different formats.
The interface also has an enable contact which can be wired to a timer or a normal switch
allowing you to activate or deactivate the interface in different time bands.
The RS232 serial interface allows you to connect the device to a personal computer using
software supplied with the kit.
Complete with an interface cable and CD-ROM software.
TECHNICAL DATA
Carrier frequency
Power supply
Electrical input
Overall dimensions
868 MHz
12/24 Vac-dc
20 mA
120 x 85 x 20 mm
TRANSPONDER CLIP
10 TRANSPONDER CLIPS (LIGHT GREY)
COVERTP-LG
10 TRANSPONDER CLIPS (DARK GREY)
COVERTP-DG
KEYPAD COVERS
90
10 2-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS
COVERMIX200
10 4-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS
COVERMIX400
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising