Sony STR-DA3700ES Quick Guide
Sony STR-DA3700ES: Experience cinematic surround sound with 7.1 channel speaker support and enjoy immersive audio from multiple angles. Connect effortlessly to your Blu-ray Disc Player and revel in the richness of multi-channel audio formats. Stream Internet videos seamlessly by connecting to a router via LAN cable and access a world of entertainment options.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
4-287-971-21(1)
STR-DA3700ES
Quick Setup Guide
This Quick Setup Guide describes how to connect speakers, a subwoofer, and a Bluray Disc Player so that you can enjoy multi-channel surround sound. Refer to the operating instructions supplied with the receiver for details.
1
Installing speakers
The following illustrations show 7.1 channel speaker systems using surround back speakers or front high speakers. Place speakers with either configuration.
Front left speaker
Front right speaker
Center speaker
Surround left speaker
Surround right speaker
Surround back left speaker
Surround back right speaker
Left high speaker
Right high speaker
Subwoofer
Installing speakers
Connecting the speakers
Connecting the monitor
Connecting a Blu-ray Disc Player
Connect all power cords last
Turning on the receiver
Setting up the receiver
© 2011 Sony Corporation Printed in Malaysia
2
Connecting the speakers
10 mm
STR-DA3700ES 4-287-971-21(1) GB
3
4
Connecting a Blu-ray Disc Player
5
Connecting the monitor
Connect all power cords last
6
Turning on the receiver
7
Setting up the receiver
Switch the input of the TV to the input to which the receiver is connected.
When you turn on the receiver for the first time, the EULA screen appears on the TV screen. Agree to EULA to proceed to the Easy
Setup screen, then set up the receiver in accordance with the instructions on the Easy Setup screen.
After performing steps 1 to 7, start playback on the Blu-ray Disc Player.
Note
Set up the Blu-ray Disc Player so that it is able to output multi-channel audio signals. For a Sony Blu-ray Disc Player, set “HDMI Audio Output” to “Auto” (as of September 1, 2011).
To the wall outlet
You can enjoy Internet video content easily using the receiver.
After making the connections and the settings shown above, if you connect the receiver to a router via a LAN cable, you can enjoy Internet video by simply selecting the content you want.
For details on the connection of the LAN cable, refer to “5: Connecting to the network” in the operating instructions supplied with the receiver. For details on the operation, refer to
“Internet video” in the operating instructions supplied with the receiver.
STR-DA3700ES 4-287-971-21(1) GB
advertisement