Contents - Soundstream
Contents
Important Safety Instructions..................................................................................... 2
Safety.................................................................................................................................... 2
Identifying the Parts.................................................................................................... 3
Main Unit............................................................................................................................... 3
Smart Remote Control........................................................................................................ 4
Connections................................................................................................................ 4
Connect to FM Antenna.................................................................................................... 4
Connect to External Audio Device................................................................................... 5
Connect Power................................................................................................................... 5
Install remote control batteries.................................................................................. 5
Prepare the Remote Control............................................................................................. 5
Replace the Remote Control Battery............................................................................... 5
Precautions Concerning Batteries..................................................................................... 5
Basic Operations......................................................................................................... 6
Power.................................................................................................................................... 6
Set The Clock....................................................................................................................... 6
Play............................................................................................................................... 6
Play iPod/iPhone/iPad........................................................................................................ 6
Play With Blue Tooth Device............................................................................................... 7
Adjust Volume Level............................................................................................................ 7
Mute Sound.......................................................................................................................... 7
Listening to the FM Radio........................................................................................... 8
Troubleshooting........................................................................................................... 8
Specifications.............................................................................................................. 9
Standard Accessories................................................................................................. 9
1
Important Safety Instructions
12 Use only with a cart, stand, tripod, bracket or
table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus
combination to avoid injury from tip-over.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
13 Unplug this apparatus during lightning storms or when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15 Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Safety
16
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not override the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades - one wider than the
other. A grounding plug has two blades and
a third grounding prong. The wide blade or
the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point where it exit from the apparatus.
11 Only use attachment/accessories specified by the manufacturer.
This is CLASS II apparatus with double insulation, and no protective earth provided.
17 Warning: to reduce the risk of electric shock, do not expose this apparatus near moisture.
18 Warning: the battery (battery or batteries or
battery pack) shall not be exposed to exceessive heat such as sunshine, fire or the lick.
19 The mains plug is used as the disconnect device, the disconnect device shall remain
readily operable.
2
Identifying the Parts
Main Unit:
Bottom View
Top View
1
2
3
1 SOURCE
Press this button repeatedly to select a source.
2 OPEN
Open the Dock for iPod/iPhone/iPad.
3
Press this button to turn on or switch to the Eco Power standby mode.
4 Dock for iPod/iPhone/iPad
Load an iPod/iPhone/iPad.
5 + VOLUME Increase or decrease the volume level.
6
7
8
Remote control sensor
LED display
Show the current status.
Power Light
Indicate mode of power.
3
FM Antenna Socket
Connect to a FM Antenna.
AUX IN Terminals
Connect to TV or an external audio device.
AC~
Power supply socket.
Connections
Smart Remote Control
Connect to FM Antenna
Connect the supplied FM wire antenna to the FM
Antenna socket on the unit.
1
2
If reception is poor, connect the outside
antenna.
Note:
Before attaching a 75 ohm coaxial lead (the kind
with a round wire going to an outside antenna),
disconnect the supplied FM wire antenna.
/SOUND
Select a preset sound effect:
Bass 1, Bass 2, Bass 3.

-
-
-
-
skip to previous track.
Tune to a radio station by searching backward.
Select previous radio station.
In Standby mode: Adjust brightness level.
3 BF/
Start or pause playback.
Pair the bluetooth-enabled device.
/MUTE
4
- Turn on this product or switch to Eco Power standby mode.
- Press and hold to turn off the product and switch to Eco Power standby mode.
- Mute or resume sound of unit.
5 /SOURCE
Select a source.
6 VOL+/VOL Increase or decrease volume level.
7
Caution:
To avoid noise, keep antennas away from the
system, the connecting cord and the AC power
cord.
Connect to External Audio Device
You can also listen to an external audio device
through this unit.

- Skip to next track
- Tune to a radio station by searching forward.
- Select next preset radio station.
- In Standby mode: Adjust brightness level.
8 M/CLOCK
- Press and hold this button to set the clock.
- Press and hold this button to search radio stations automatically.
- Preset station for tuner.
4
Install remote control batteries
Using AUX IN socket
Connect audio cables to:
- The AUX IN sockets on this unit.
- The audio output sockets on external audio device.
Note:
Press SOURCE button on main unit or remote control to select AUX 1(AUX 2) for your connection.
Prepare the Remote Control
The provided Remote Control allows the unit to
be operated from a distance.
 Even if the Remote Control is operated within the effective range (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control.
 If the Remote Control is operated near other products which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other products may operate incorrectly.
Connect Power
Caution:
- Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
- Before connecting the AC power cord, ensure you have completed all other connections.
Replace the Remote Control Battery
1
2
Connect the AC power cord to:
- the AC~ socket on this unit.
- the wall socket.
Use needle to push the battery forward through the hole on rear of remote control.
Remove the old battery. Place a new CR2025 battery with correct polarity (+/-) as indicated. Then install the battery into remote control.
Precautions Concerning Batteries
 When the Remote Control is not to be used 




5
for a long time (more than a month), remove the battery from the Remote Control to prevent it from leaking.
If the batteries leak, wipe away the leakage inside the battery compartment and replace the batteries with new ones.
Do not use any batteries other than those specified. Do not heat or disassemble batteries. Never throw them in fire or water.
Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short circuit, leak or explode.
Never recharge a battery unless it is confirmed to be a rechargeable type.
Basic Operations
Play
Power
Play iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad
through this unit.
You can use all the functions on main unit or remote control after connecting to power supply
(called Standby Mode).
1.
2.
Turning the System On
button to turn the system on from
Press the
standby mode.
Note:
The set will switch to last selected source.
Press the SOURCE button to select DOCK source.
Push down the OPEN area on the end to rotate out the dock for iPod/iPhone/iPad.
Turning the System Off
Press
button on main unit or press and hold
button on remote control to turn the system off
and go to Eco mode.
Note:
Be sure to unplug the power cord from the outlet
when the system is not in use for an extended
period of time.
3. Place an iPod/iPhone/iPad to the dock.
Set the Clock
The built-in clock shows the correct time in the
display panel.
1. In standby mode, press and hold the CLOCK button to activate the clock setting mode, hour indicator will blink.
2. Set the hour with the  button or  button.
3. Press CLOCK button to confirm, minute indicator will blink.
4. Set the minute with the  button or  button.
5. Press the CLOCK button to confirm, the built-
in clock starts operating and the seconds start counting from 0.
4. Start to play the connected iPod/iPhone/iPad.
- To pause/resume play, press the BFbutton.
- To skip to a track, press the / buttons.
- To search during play: press and hold / buttons, then release to resume normal play.
- To navigate through the menu: hold and press M/CLOCK button, then press , to select, and press BF to confirm.
Note:
When you use , to navigate through the menu,
the interval between each operation should be
within some seconds, or it will return to normal
function.
Charge the iPod/iPhone/iPad
The docked iPod/iPhone/iPad begins to charge
while the unit is connected to AC power.
Remove the iPod/iPhone/iPad
1. Pull the iPod/iPhone/iPad out of the dock.
6
-
-
-
-
-
2. Raise up the buckle1, and rotate the dock module to original position2.
Play With Blue Tooth Device
You can listen to music from a bluetooth-enable
device via this player.
recovery previous connection.
The player will also be disconnected when your device is moved beyond the operational range.
If you want to reconnect your device to this player, place it within the operational range.
If the device is moved beyond the operational range, when it is brought back, please check if the device is still connected with the player.
If they are connected, display panel shows "BLU T".
If the connection is lost, display panel shows "NO BT", follow the instruction above to pair your device to the player again.
Listen to music from bluetooth device
 If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the player.
 If the device also supports Audio Video Remote Control Profile (AVRCP) profile, you can use the player's remote control to play music stored on the device.
1. Pair your device with the player.
2. Start play music via your device (if it support A2DP)
3. Use supplied remote control to control play(if it support AVRCP)
- To pause/resume play, press theBF/ button.
- To skip to a track, press the / buttons.
Pair the Bluetooth-enabled devices
The first time you connect your bluetooth device
to this player, you need to pair your device to this
player.
Note:
- The operational range between this player and a Bluetooth device is approximately 8 meters.
- Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the device.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- Keep this player away from any other electronic device that may cause
interference.
1. Turn on the Bluetooth function on your device.
2. Switch player's source to bluetooth, Display panel shows "BLU T", then show "NO BT" (if there's no bluetooth device connected).
3. Press and hold "BF/ " button on remote control for seconds to activate bluetooth pairing mode, display panel shows "PAIR".
2. Search for bluetooth device with your device.
3. Select “BLUEPORT” in the pairing list.
4. Enter default password “0000”, if the pairing succeeds, display panel shows "BLU T" again.
5. To disconnect connection, turn off the bluetooth function on your device or switch the player to other source.
Tip
- If there's a connection exist, hold and press "BF/ " button on remote control for seconds will re-activate the pairing mode, the connection will be interrupted.
- If there's no other bluetooth device pair with this player in two minutes, the player will Adjust Volume Level
During play, press the +/- buttons to increase/
decrease the volume level.
Mute Sound
During play, press the MUTE button to mute
or restore sound. Press this button again or -/+
buttons to cancel the effect.
Adjust the brightness level of display
In the standby mode, press the / button on
the remote control to adjust the brightness level
of display.
7
Listening to the FM Radio
Troubleshooting
Tuning in a Station
To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
1 Ensure that you have connected and fully extended the FM antenna.
2 Press the SOURCE button to select the TUNER source.
3 Press and hold the / buttons(till the digital moved), then release the button, the frequency changes down or up automatically until a station is found.
4 Repeat steps 2-3 to tune to more stations.
Note:
-
No power
-
-
-
Remote control does not work
-
-
-
-
-
The unit will automatically switch the Stereo or MONO channel to receive the FM radio mode, it can get the best effect.
Presetting Stations
You can preset up to 20 FM stations.
 Program radio stations automatically
Press and hold the M/Clock button for some
seconds to activate automatic programming. All available stations are programmed in the order of waveband reception strength.
- The first programed radio station is played automatically.
Note:
-
Ensure that the AC cord of the apparatus is connected properly.
Ensure that there is power at the AC outlet.
Press standby button to turn the unit on.
Before you press any function button, first select the correct source.
Reduce the distance between the remote control and the unit.
Insert the battery with its polarities (+/-) aligned as indicated.
Replace the battery.
Aim the remote control directly at the ensor on the front of the unit.
Poor radio reception
-
-
-
If the system is unplugged or if a power failure occurs, the preset stations will not be erased.
Increase the distance between the unit and your TV or VCR.
Fully extend the FM antenna.
Connect an outdoor FM antenna instead.
Clock setting erased
-
-
Tune to a preset radio station
Press the / buttons to skip to previous/next
preset radio station.
Power has been interrupted or the power cord has been disconnected.
Reset the clock.
Using iPhone to play music
-
While the iPhone is playing the music throught the docking, there may be a chance that the iPhone may not be under a good receiption mode to get the incoming call signal.
No Response From the Unit
-
8
Disconnect and reconnect the AC power plug, then turn on the unit again.
Specifications
General
Power Requirements.......................AC 120V ~ 60Hz
Power Consumption.........................................100W
Output Power.................................... 25W x 2 + 50W
Total Harmonic Distortion.................0.5%(1kHz, 1W)
Audio Input Sensitivity/Impedance......................... ............................................................... 500mV/47kΩ
Frequency Response..................55Hz - 20kHz(±3dB)
Unit Dimensions (W x H x D).......................................
......................................................11 1/2" round 47"H
Speaker
Front
Impedance............................................................ 3Ω
Rate Power..........................................................25W
Woofer
Impedance............................................................6Ω
Rate Power......................................................... 50W
Remote
Distance................................................................ 6m
Angle..................................................................... 30O
Standard Accessories
FM antenna............................................................ x 1
AC Power cord....................................................... x 1
Remote Control . ................................................... x 1
Owner’s manual..................................................... x 1
Design and specifications are subject to change without notice.
9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising