FW VERSION 1.06 FW 1.06 VERSION BLUETOOTH A2DP MUSIC PLAYER Connection to A2DP music player Play music (Play) Pause function (Pause) Next track (Skip) Stop playing music (Stop) The connection is automatic when you turn on the system. Wait a few seconds for the connection. Press the “ ” button and keep it pressed for 2 seconds. When the player is connected and playing music, press “ ” for 2 seconds. When the player is playing music, press “ ” for 4 about seconds. Press “ ” for 2 seconds. The music stops and the A2DP player is disconnected. Note: The Bluetooth intercom does not work while listening to an A2DP audio source or an un Mp3 player connected via cable. ------------------------------------ MUSIC PLAYER VIA CABLE CABLE To listen to the audio source, connect the cable to the helmet, then start playing the audio file on the device, then activate the audio peripheral device using the specific key. Activate audio via cable Deactivate audio via cable Briefly press “ Briefly press “ ” and “on on” on at the same time. ” and “on on” on at the same time. N.B. : You cannot stay connected in intercom mode with the pillion passenger while using the audio source via cable.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project