Repeat Playback To Repeat all tracks on a disc 1. Push Repeat button twice. Repeat Indicator (REPEAT ALL) lights up. 2. Push Play/pause button to begin repeat playback. When the end of the last track is reached, the selection returns to track 1 for repeat play all tracks. To release Repeat function. Push Repeat button. Repeat indicator goes off. When the end of the last track is reached, the play stops automatically. To repeat a track on a disc : 1. Push the forward skip button until the desired track number appears in the Track Number Display. 2. Push Repeat button. Repeat Indicator (REPEAT 1) lights up. 3. Push Play/pause button to begin repeat playback. When the end of the track is reached, the playback of the track is repeated. Installing Batteries: You will need 8 “C” size batteries. (1.5V x 8) NOTE: Alkaline batteries will normally last longer and reduce the possibilty of battery leakage. 1.Open Battery Door 2. Install Batteries As Shown The use of the Microphone 1. Plug the tail-end of the Handy Microphone into the Mic jack (No.10 on diagram). 2. When using the Microphone turn the switch to on position. 3. Speak in normal voice about 2 inches from the Microphone. 4. Avoid placing Microphone close to speakers of the unit to prevent squeaking noise due to feedback from speakers. 5. When not using Microphone always disconnect it from the unit. Specifications General Power Source: Output power: Speakers: Load Impedance: Dimensions: Weight: KIDS-CD20 SING-A-LONG PORTABLE STEREO WITH COMPACT DISC DIGITAL PLAYER DC12V “C” Size battery x8, (UM2, IEC R14) 1.5w + 1.5W (3”) Full range Speaker x 2 Headphones 16-50 ohms (Recommended 32 ohms) 255mm(L) X 190mm(W) X 120mm(H) 1.2 KG CD Play Type: Compact Disc player Audio Channels: 2 Wow And Flutter: Unmeasurable (Less than 0.001% W.Peak). NOTE: Watch carefully the and ends of the batteries If you don’t install batteries correctly the set will not work. NOTE: If the sound becomes weak and unclear, the batteries may be weak. Replace all eight batteries at once. NOTE: Remove batteries if unit is not to be used for a long period of time (about 30 days or more ) to prevent battery leakage and possible damage to the unit. BATTERY INSTRUCTIONS Do not mix old and new batteries. Do not mix alkaline, standard (carbon-Zinc) or rechargeable (NickelCadmium) batteries. Non- rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the toy before being charged. Only batteries of the same or equivalent type as recommended are to be used. Batteries are to be inserted with the correct polarity. Exhaused batteries are to be removed for the toy. The supply terminals are not to be short-circulted. CAUTION IT IS IMPORTANT TO CHECK REGULARLY FOR DAMAGE TO THE CORD PLUG ENCLOSURE OR OTHER PARTS OF THE ADAPTOR TO PREVENT FROM POTENTIAL HAZARDS. THE TRANSFORMER USED WITH THE TOY MUST COMPLY WITH THE REQUIREMENT OF EN60742 PRODUCT SUPPORT For technical support, contact us: Web: www.HamiltonBuhl.com Email: email@example.com Phone: 1-800-631-0868 Instruction Manual ™ www.HamiltonBuhl.com Features And Controls 14 13 12 11 10 PLAY WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING. 5 REPLAY 9 8 7 6 5 4 The Owner’s Manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual. 3 2 1 NOTE: This unit will become warm used for a long period of time. This is normal and does not indicate a problem with the unit. This CD Player includes micro-processors which may malfunction as a result of external electrical Interference or noise. If the CD Player is not working properly, disconnect the power source (batteries, AC household power or DC car adaptor) and then reconnect it. 2. AC Operation - When using an AC adaptor (included) specification is 12V DC BOOMA with the polarity as follows: Plug the tail - end of the AC Adaptor into the DC socket (No. 15 on diagram). Then insert the Main Adaptor into your AC supply, the set is now ready to operate on AC power. TO LISTEN TO A CD 1. Push the power knob 2. Press “DOOR OPEN” button to open the door and insert the CD with label facing up and close the door. OPEN DOOR BUTTON 3. Press the “PLAYPAUSE” button once to start the playback of CD from track number 01. 4. To “PAUSE” during play back press the pause button 16 1. Right Speaker 2. Volume Control Knob 3. Repeat Button 4. Play/Pause Button 5. Stop Button 6. Skip/ Search Button 7. Skip/ Search Button 8. Power On/Off Button 9. Left Speaker 10. Mic Jack 11. Open Door Button 12. Power Indicator 13. LCD Display 14. Phone Jack 15. DC Jack 16. Battery Compartment 15 This product contains a low power laser device. The product you have purchased has been carefully engineered and manufactured to give you reliable operation. Read this manual before operating the unit to become familiar with its features. 5. To “STOP” during playback press the stop button. IMPORTANT NOTES: • Keep instructions- The safety and operating instructions should be retained for future reference. • Make sure not to obstruct the ventilation openings. • When using with batteries, make sure that they are installed correctly before turning the power on. • Store your CDs in a cool area to avoid damage from heat. THE DISPLAY WILL SHOW THE TOTAL NO. OF SONGS POWER SUPPLY 1. Battery Operation - Release battery cover by pressing the two clips downwards and pulling the battery cover towards you and remove. Insert 8 C size (UM2) batteries as indicated (batteries not included). Please observe the correct battery polarities or the set will not operate. TO LISTEN TO A CHOSEN TRACK 1. In stop mode press one of these keys until you search the selected track.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project