4x2 component video + stereo audio + s/pdif matrix selector switch

4x2 component video + stereo audio + s/pdif matrix selector switch
4X2 COMPONENT VIDEO + STEREO AUDIO
+ S/PDIF MATRIX SELECTOR SWITCH
2215­40473­ADT | Quiktron
FEATURES & BENEFITS
With its high bandwidth and low crosstalk, this selector delivers maximum picture performance. The ultimate
controller for high definition and progressive scan video sources, this selector routes any of four source devices to
each TV/monitor or one source to both TV/monitors. Connect all your HDTV products including DVD players, satellite
receivers, cable set­top boxes, or gaming systems, and use the remote control, RS­232 control, USB, or front panel
buttons to watch any picture on any two CRT, LCD or projection televisions with complete independence!
• Audio Input: Nominal input 1V p­p
• Input impedance: 22 kOhm
• Output impedance: 100 kOhm
• S/N Ratio: 80 dB at 2 Volts
• Frequency response: 20 ~ 100 kHz video
• Video component input impedance: 75 Ohm
• Video output impedance: 75 Ohm
• Video Bandwidth > 100 MHz
SPECIFICATIONS
GENERAL INFO
Color: Black
Type: Component Video Switches
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising