取扱説明書 D902iS

取扱説明書 D902iS
Making/Receiving
Videophone Calls
Videophone .......................................................................................................80
Making videophone calls .................................................................................80
Receiving videophone calls .............................................................................83
Using Chara-den ...............................................................................................85
Setting images to be sent to the other party ..................................................86
Customizing the display settings during a videophone call ........................90
Changing the videophone settings ........................... Videophone Settings 90
Setting of switching between a voice call and videophone call
.................................................................................. Notify Switchable Mode 93
Setting how incoming videophone calls are handled during i-mode
................................................................................. Data Session Arrival Act 93
Using the videophone by connecting with an external device
................................................................................................ External Device 94
79
Making/Receiving Videophone Calls
Videophone
The videophone function is available between terminals that support DoCoMo’s videophone. By using
the videophone, you can talk on the phone while looking each other images. It is also possible to display
a still image, substitute image, Chara-den, etc. instead of your self image.
DoCoMo videophone specifications are compliant with “3G-324M*1 that has been standardized by the international
standard 3GPP*2”. Note that the connection with videophones of different specifications cannot be established.
*1 3G-324M…An international standard for the 3rd generation mobile videophone
*2 3GPP (3rd Generation Partnership Project)…Area standardization organization established to develop the
standard technology specification for the 3rd generation mobile communications systems (IMT-2000).
・ The following 2 communication speeds are provided for the videophone:
・64K: Connects at communication speed of 64 kbps. ・32K: Connects at communication speed of 32 kbps.
Videophone
Screen display during a videophone call
ab
c
a Main screen
Image of the other party is displayed by default.
b Communication
speed
: 64K
: 32K
c Speakerphone
function
: On
No icon: Off
d Sub screen
Your image is displayed by default.
e Zoom
f Status
to
: Normal to 2x (in-camera)
to
: Normal to 16x (out-camera)
: Sending your self image
: Sending the camera-off image
d
e- l
m
: Sending Chara-den
: Sending a frame
: Sending a still image
: On-hold
: On Response and Hold
: Recording a message
: Recording a movie memo
Action mode
: Action
: Action of parts
g Scene mode/
effect
: Full auto, etc.
The icons for other modes/effects ☛P87
h Compact light
No icon: Turn light off
: Turn light on
i Quality of
outgoing image
No icon: Normal
: Prefer motion speed
: Prefer image quality
j Sound/image
sending and
receiving status
: Sending and receiving sound
: Sending and receiving image
: Sending and receiving sound/image
k Macro mode
No icon: Off
l Videophone/voice
call switching
No icon: Switching is not available.
m Call duration
Displayed in the HH:MM:SS format
: On (out-camera)
: Switching is available.
Making videophone calls
・ International videophone calls are available by using the DoCoMo’s international call service “WORLD
CALL”. ☛P58
1 Enter the phone number
・ Entering method is the same as for voice calls.
80
Your image is displayed while being connected.
・ If the phone of the other party is busy, you will hear a busy signal. The
message, Busy. or Connection failed. is displayed on the screen. Press f to
end the call and call again later. You can call back quickly by using Redial.
・ Pressing t while being connected sends the substitute image set in Image
Setting. When the substitute image is set to Chara-den, Chara-den may not be
displayed. If this happens, the default image for the substitute image setting is
sent to the other party. ☛P92
・ Charging begins when Connected to videophone. is displayed.
3 Talk with the other party
Making videophone calls
The other party’s voice comes out of the speaker (Speakerphone function).
・ To put the call on hold: o
・ To turn on/off the speakerphone function: a or n
・ Depending on the other party’s settings, the substitute image may be
displayed.
・ To disable turning on the speakerphone function automatically, change the
setting in Videophone Settings.
4 Press f when you finish the call
・ To end the videophone call by closing FOMA terminal, change the setting in Close Setting.
INFORMATION
● You can also make a videophone call by performing in order of Steps 2, Step 1. When t is pressed and the phone
number is entered, a videophone call is made automatically after about 5 seconds.
● You can make videophone calls by attaching Chaku-moji. ☛P55
● You can make videophone calls by setting conditions. ☛P58
● When Speakerphone is set to ON in Videophone Settings and Silent Mode is active, if you make a videophone call, a
confirmation screen appears asking whether to switch to the speakerphone call. Select Yes or No.
● If a videophone call cannot be made, one of the following message is displayed on the screen and then the standby
display returns. Note that the displayed message may not reflect the status of the other party’s terminal correctly,
depending on the type of the terminal and/or the network service used by the other party.
Message
Check number, then redial.
Busy.
Out of service area/power off.
Set Caller ID to ON.
Description
You dialed the phone number not used.
The other party is busy.*1
The other party is outside the service area or the other party’s terminal is turned off.
This message is displayed in case connecting without notifying the caller ID (when
accessing to V-Live or visualnet).
Redial using voice call.
This message is displayed when the other party sets Call Forwarding Service and the
forwarding destination is the terminal which is not compatible with videophone.*2
Busy with packet transmission. The other party is in packet communication.
Connection failed.
Set Caller ID Notification to Notify and dial again.
・ The message may appear in cases other than the above.
*1 The message may also appear when the other party is in packet communication, depending on his/her terminal.
*2 As of May 2006, the message may also appear when the other party has activated Voice Mail Service.
Next
Making/Receiving Videophone Calls
2t
81
Making/Receiving Videophone Calls
● If a videophone call made is not connected, redialing is automatically performed as described below:
Call type
64K
32K
Auto redial as
voice setting
ON
OFF
ON
OFF
Redialing operation
64K → 32K → Voice call
64K → 32K → Disconnection
32K → Voice call
32K → Disconnection
When a videophone call is made by specifying a multinumber, redialing will be made with the specified
number.
When a videophone call with Chaku-moji is made,
redialing will be made with the same Chaku-moji attached.
If redialing as voice call occurs, voice call charges apply.
● When there is an incoming call while dialing a videophone call or redialing, the dialing may be interrupted and the ring
tone may sound.
● Even if sending/receiving the voice or image is aborted and
Making videophone calls
(voice only) or
(image only) is displayed during
a videophone call, the call may be continued as it is.
● When you talk on a videophone call while a flat type earphone/microphone set with switch (optional) is connected, the
voice sounds from the connected earphone/microphone regardless of the setting of Speakerphone in Videophone
Settings.
● Please note that digital communication charges apply for videophone calls instead of voice call charges even if the
substitute image or Chara-den is used.
● Videophone at 32K is intended for connection with devices such as PHS with which videophone calls at 64K may not be
available depending on the network condition. When a videophone call is made at 64K, the call type is automatically
switched to 32K when redialing if the communication environment of the other party is found to be 32K area. When ON
is set for Auto redial as voice in Videophone Settings, redialing at 32K is also given priority. ☛P90
・ Even if a call is made at 32K, the charge is the same as digital communication charges at 64K.
● If a videophone call is made to emergency calls (110, 119 or 118) from FOMA terminal while Auto redial as voice is set to
ON in Videophone Settings, the call automatically switches to a voice call.
Switching from a videophone call to a voice call
You can switch to a voice call by operating from the submenu during a videophone call when the other
party’s terminal can switch calls. Switching can be performed only from the terminal which made the
videophone call.
・ This operation can be performed between the terminals that support switching between voice call/videophone
call.
・ To switch to a voice call, the other party needs to set Indication ON of Notify Switchable Mode in advance.
☛P93
1 m1 during a videophone call z Select Yes
・ A guidance informing that the call is being switched is played during switching.
・ Select No to return to the videophone talking screen.
INFORMATION
● For precautions when switching between a voice call and videophone call, see INFORMATION in “Switching from a
voice call to a videophone call”. ☛P53
● Switching from a voice call to a videophone call ☛P53
82
Send DTMF
You can input tone signals (DTMF) while sending your self image ( ), the camera-off image (
den ( ).
・ Tone signals may not be received depending on the receiver’s device.
) or Chara-
1 m9 during a call z Enter with dial keys
Receiving videophone calls
・ You cannot receive a videophone call by pressing the keys other than t, n or a (Any Key Answer is
unavailable).
1 A call is received
2 t or n
The ring tone sounds, the display light turns on and the Enter key lights/flashes.
・ The caller’s phone number, name, image or video/i-motion will be displayed on
the screen according to the caller’s dialing condition or your FOMA terminal
settings. When a call with Chaku-moji is received, Chaku-moji is displayed.
☛P63
・ To put the incoming call on hold: f
Your image is displayed while being connected.
■ Receiving a videophone call with the substitute image: a
The substitute image is sent to the other party when the videophone call is
connected.
・ Even when Chara-den is set as the substitute image, Chara-den may not
be displayed. If this happens, the default image for the substitute image
setting is sent to the other party.
Next
83
Receiving videophone calls
The entered number is displayed and the tone signals (DTMF) are transmitted.
・ To cancel transmitting tone signals (DTMF): c
・ The tone signals (DTMF) are transmitted by pressing dial keys without pressing m9 while your self
image or the camera-off image is being sent.
・ When the tone signals (DTMF) are transmitted, the set frame and still image are canceled.
・ Because tone signals (DTMF) are transmitted using dial keys, you cannot use dial keys to make actions
while sending Chara-den.
Making/Receiving Videophone Calls
Transmitting tone signals (DTMF)
Making/Receiving Videophone Calls
3 Talk with the other party
The other party’s voice comes out of the speaker (Speakerphone function).
・ To put the call on hold: o
・ To turn on/off the speakerphone function: a or n
・ Depending on the other party’s settings, the substitute image may be
displayed.
・ To disable turning on the speakerphone function automatically, change the
setting in Videophone Settings.
4 Press f when you finish the call
・ To end the videophone call by closing FOMA terminal, change the setting in Close Setting.
Receiving videophone calls
Operations available from the submenu while receiving a videophone call
Submenu item
Description
aCall Rejection
Disconnects the call (the caller does not pay for the call).
bV-phone answerphone*1
Connects the incoming call to the Voice Mail Service Center.
cCall Forwarding*2
Forwards the incoming call to the forwarding phone number.
*1 Valid when you use Voice Mail Service (The service is not available as of May 2006).
*2 Valid when you use Call Forwarding Service and the forwarding phone number has been set.
・ You can operate FOMA terminal with the following keys while receiving a call:
・ C (for over a second): Record a message (Quick Record Message)
・ C: Stop the ring alert/vibrator
・ % : Adjust the ring volume
INFORMATION
● When Speakerphone is set to ON in Videophone Settings and Silent Mode is active, if you receive a videophone call,
a confirmation screen appears asking whether to switch to the speakerphone call. Select Yes or No.
● When a videophone call arrives while a flat type earphone/microphone set with switch (optional) is connected, the voice
sounds from the connected earphone/microphone regardless of the setting for Speakerphone in Videophone Settings.
● When a videophone call arrives, it is not connected if the forwarding destination is not set to a videophone terminal
compliant with the 3G-324M even if Call Forwarding Service is activated. Check the specifications of the forwarding
destination when setting it.
● Changing the operation for incoming videophone calls ☛P70
84
・ The switching operation can be performed only from the terminal which made the videophone call. It cannot
be performed from the terminal which received the videophone call.
・ To receive the request of switching to a voice call, set Indication ON of Notify Switchable Mode in advance. ☛P93
1 Receive the request of switching to a voice call during a videophone call
The videophone call is switched to a voice call automatically.
・ A guidance informing that the call is being switched is played during switching.
Making/Receiving Videophone Calls
Receiving a call by switching from a videophone call to a voice call
Using Chara-den
Using Chara-den
A character can be sent instead of your image when making a videophone call. The character can be
moved by pressing dial keys during a videophone call. Some characters move their mouth in time with
the sounds picked up by the microphone.
1 m321 during a call
2 Select a folder z Select Chara-den
・ If you press dial keys while sending Chara-den as the substitute image, the
character performs the action corresponding to the number of the keys. The
following operations can also be performed:
0:Cancel action
(:Display the action list
・ Selecting an action moves the character.
( (for over a second):
Switch action modes (Action/Action of parts)
・ The action list of Chara-den set by default ☛P425
©BVIG
Chara-den
Action list scrolls.
INFORMATION
● Some Chara-den has no actions.
85
Making/Receiving Videophone Calls
Setting images to be sent to the other party
You can change images and apply special effects to the image sent to the other party during a
videophone call. Also, you can switch between the in-camera and the out-camera.
Switching the outgoing image between your self image and the substitute image
1 Press t during a call
・ Each press switches the image between your self image (
Setting images to be sent to the other party
) and the
substitute image (
or
). ☛P92
・ Even when Chara-den is set as the substitute image, Chara-den may not be
displayed. If this happens, the default image for the substitute image in Image
Setting is sent to the other party. ☛P92
©BVIG
The substitute image
Setting the quality of outgoing and incoming images
・ Setting Prefer motion spd makes motions smoother in a little lower-definition image.
・ Setting Prefer img qual makes motions a little slower in a higher-definition image.
Default
Normal
Example Setting the quality of outgoing image
1 m71 during a call
・ Pressing & during a call also switches the quality of outgoing image.
■ Setting the quality of incoming image: m72 during a call
2 Press any of 1 to 3
Setting a frame on the outgoing image
Frame
The frame can be set while sending your self image.
・ Only the frame with the display size of 176 x 144 or smaller can be selected. As for downloaded frames,
only the frame with the display size of 176 x 144 can be selected.
1 m31 during a call
86
・ While the in-camera is used, the mirror image (left-right reversed image) is
displayed on the screen and the normal image (right directed image) is sent to
the other party. While the out-camera is used, the same image as displayed on
the screen is sent to the other party.
・ To cancel sending the frame: o while sending a frame
・ Frames set by default ☛P424
Applying special effects to outgoing image
Scene Mode/Effect
Item
Icon
Item
Icon
Night
Item
Icon
Item
Letter
Soft touch
Mono tone (red)
Sensitivity up
Twilight
Color reversal
Super sensitivity up
Surf&Snow
Painting
Mono tone (green)
Adjust backlight
Sport
Woodcut
Mono tone (blue)
Spot photometry
Pet
Whiten
Monochrome
Scenery
Gourmet
Suntan
Sepia
Icon
・ For details ☛P187
Default
Full auto
1 m21 during a call
2 Press any of 1 to 9, 0, ( or #
・ Press & to switch the pages.
The effect currently applied
Adjusting the brightness/color density/flicker of outgoing image
Camera Setting
You can adjust the brightness and color density in 5 levels. Also, you may be able to control the flicker of
images, if it occurs, by making settings according to the power supply frequency in your area.
・ This setting can be changed only while your self image is being sent.
・ The brightness and color density may not be changed depending on the setting for Screen Mode/Effect.
・ This setting is retained even after the call is finished.
・ The flicker adjustment settings for Camera and Bar Code Reader will reflect changes in this setting.
Default
Brightness: level 3 Density: level 3 Flicker adjustment: Auto
Next
87
Setting images to be sent to the other party
You can apply the following effects to outgoing images. These settings can be changed only while sending your
self image.
Full auto
Making/Receiving Videophone Calls
2 Select a frame
Making/Receiving Videophone Calls
1 m2 during a call z Select an item
■ Adjusting brightness and color density:
a 2 z Highlight Brightness slider z &
b d to highlight Density slider z & z p
・ Your self image is displayed on the main screen while adjusting. You
can check the change of brightness or color density as you shift the
slider’s position.
・ If you do nothing on the terminal for some time after changing the
slider’s position, the settings are not changed and the talking screen
reappears.
■ Adjusting flicker: 3 z 1 to 3
Setting images to be sent to the other party
Sending the still image/camera-off image
Select a still image or the image displayed as Camera off (camera-off image).
・ This setting is not available while a frame is being sent. ☛P86
・ Only the still image that is 176 x 144 or smaller and is permitted to be output from FOMA terminal can be
set.
1 m3 during a call z Select an item
■ Sending the camera-off image: 3
・ When the camera-off image is set, the substitute image set in Image Setting is sent.
However, if Chara-den is set as the substitute image, the default image (camera-off image) is sent.
■ Sending a still image:
a 4 z Select a folder
b Select a still image
・ To view a still image: Highlight a still image z p
・ To send the previous image: o while sending a still image
Switching display magnifications
Zoom
・ Available only while your self image is being sent.
Default
normal (
)
1 Press % during a call
・ Each press of u switches the magnification of image as follows. Press d to switch in the reverse
order.
In-camera : normal (
Out-camera: normal (
→ 10x (
) → 2x ( )
) → 2x ( ) → 4x ( ) → 6x (
) → 12x ( ) → 16x ( )
) → 8x (
INFORMATION
● Zooming will be canceled if you switch between the in-camera and out-camera.
88
)
・ Available only while your self image is being sent.
Default
in-camera
1 Press m6 during a call
The image through the selected camera is sent.
・ Each press switches between the in-camera and
out-camera.
・ Even if you switch the cameras, the frame and the
Out-camera selected
Switching the camera to the macro mode
You can switch to the macro mode and adjust the focus of the image when sending the image of an object
about 7 to 11 cm away.
・ You can switch the camera to the macro mode only while the out-camera is used.
Default
Macro OFF
1 Press m4 during a call
・ To turn off the macro mode: m4
INFORMATION
● If you switch to the in-camera in the macro mode, the camera returns to the normal mode.
Turning the compact light on
・ You can switch the compact light on only while the out-camera is used.
・ The compact light may go out temporarily when you perform some setting operations while talking.
1 Press m5 during a call
The compact light is turned on. If the light has been turned on, it goes out.
・ Each press turns the compact light on ( ) and off (no icon).
89
Setting images to be sent to the other party
In-camera selected
brightness/color density/flicker settings of outgoing
image are kept.
・ Open the lens cover when switching to the outcamera. If you close the lens cover while using the
out-camera, the substitute image is sent to the other
party. If you open the lens cover while Open lens
cover. is being displayed, your image is sent.
Making/Receiving Videophone Calls
Switching the in-camera and out-camera
Making/Receiving Videophone Calls
Customizing the display settings during a videophone call
・ The settings are retained even after the call is finished.
Switching between the main screen and sub screen
Default
Main screen image: other party’s image Sub screen image: your self image
1 Press p during a call
・ Each press switches the images on the main screen and sub screen by turns.
Main screen: other party’s image
Sub screen: your self image
Main screen: your self image
Sub screen: other party’s image
Customizing the display settings during a videophone call
Changing the main screen size
Default
large
1 Hold down p for over a second during a call
・ Each press switches the screen size in the following order: large → standard → small → large → … .
Setting the screen displayed during a call
Default
Videophone Settings during a call
Display setting: Both sides Sub screen: My side Screen size: Large Display light: Always on(normal)
1 m8 during a call
2 Select each item to set
・ For setting each item (Display setting, Sub screen, Screen size and Display light), follow Step 2 in “Changing
the videophone settings”. ☛P91
3 Press p
Changing the videophone settings
Videophone Settings
Set the operation to be performed when a videophone call is not connected, the screen displayed during
a videophone call, etc.
・ The auto redial as voice function is provided to ensure access to the other party. By setting this function to
ON, a dialed videophone call will be automatically redialed as voice call if the other party’s terminal does not
support the videophone function or cannot receive the videophone call while using the mova service through
Dual Network Service. Redialing does not occur, however, if you call an ISDN-sync 64 kbps or PIAFS
access point, or an ISDN videophone incompatible with 3G-324M (as of May 2006), or if you dial the wrong
number. Note that some calls may require the call charge.
Default
Auto redial as voice: OFF Display setting: Both sides Sub screen: My side Screen size : Large
Visual preference: Normal Display light: Always on(normal) Speakerphone: ON
1 m8713
90
Auto redial as voice:Sets whether to redial as voice call automatically when a videophone call is not connected.
Display setting
:Specifies whether to display either your self image or the other party’s image or both
images during a videophone call.
・ If you set other than Both sides, Sub screen cannot be set.
Sub screen
:Specifies whether to display your self image or the other party’s image on the sub
screen during a videophone call.
Screen size
:Sets the main screen view size.
Visual preference :Sets the quality of outgoing image.
:Sets the display light during a videophone call.
・ When Terminal settings is set, the setting of Display light time (Normal use) in Display
Light Setting (☛P144) applies.
Speakerphone
:Specifies whether to turn on the speakerphone function automatically once a videophone
call is connected.
3 Press p
INFORMATION
● Even when Auto redial as voice is set to ON, redialing may not be performed depending on the situation of the other party
or the network.
● When Auto redial as voice is set to ON, if you make a videophone call during a packet communication with a PC
connected, the call is redialed as voice call without connecting to a videophone call. During a voice call or 64K data
communication, the call is not connected to a videophone call and redialing is not performed, either.
● If redialing as voice call occurs with Auto redial as voice set to ON, voice call charges apply instead of digital
communication charges.
● When Speakerphone is set to ON and Silent Mode is active, if you make a videophone call, a confirmation screen
appears asking whether to switch to the speakerphone call. Select Yes or No.
Menu 8234
Setting the images to be displayed during a videophone call
Image Setting
Change the images to be sent to the other party during a videophone call such as the substitute image, answer
machine image, response hold image, on-hold image and movie memo image.
・ You cannot set the following images:
・Still image with a size larger than 176 x 144
・Animation and Created animation
・Still image in the format other than JPEG and GIF formats
・Image that is prohibited from being output from FOMA terminal
Next
91
Videophone Settings
Display light
Making/Receiving Videophone Calls
2 Select each item to set
Making/Receiving Videophone Calls
Setting the substitute image
Default
Default Chara-den
1 m8715
2 1 z Select Image field
■ Setting the default Chara-den: 1
Default Chara-den (ブンブン(Dimo)) is set.
■ Setting the default still image: 2
Default image (camera-off image) is set.
Chara-den
©BVIG
Videophone Settings
■ Setting other Chara-den:
a 3 z Select Select image (from List images) z Select
a folder
b Select Chara-den
・ To display Chara-den: Highlight Chara-den z p
■ Setting other still images:
a 4 z Select Select image (from List images) z Select a folder
b Select a still image
・ To display a still image: Highlight a still image z p
・ The selected image with the text message on it is displayed on the other party’s terminal.
3 Press p
INFORMATION
● If the Chara-den set as the substitute image is deleted, the substitute image is reset to Default Chara-den. If the still
image or the default Chara-den is deleted, the substitute image is reset to Default image.
Changing the answer machine/response hold/on-hold/movie memo images
Default
Answer machine image, Response hold image, On-hold image, Movie memo image: Default
1 m8715
2 2 to 5
3 Select each item to set
・ When Default is selected, the default image is set.
・ When Select image (from Image) is selected, select Select image (from List
images) to select an image.
・ The selected image with the text message on it is displayed on the other party’s
terminal.
In case of the answer
machine image
4 Press p
92
Notify Switchable Mode
Set whether to notify the other party’s terminal that your terminal can switch between a voice call and a
videophone call.
・ You cannot change the setting during a voice call or videophone call.
・ This setting cannot be made outside the service area. Operate the terminal in locations with good radio
wave condition.
Default
Indication ON: active
1 m87171
Making/Receiving Videophone Calls
Setting of switching between a voice call and videophone call
■ Deactivating: m87172
2 Select Yes
Setting how incoming videophone calls are handled during i-mode
Data Session Arrival Act
Videophone calls can be received during i-mode packet communication.
Default
V.phone priority
1 m8714
2 Press any of 1 to 4
V.phone priority
:Receives a videophone call. When the call is answered, the current packet
communication is disconnected.
Packet DL priority
:Rejects an incoming videophone call and continues the packet communication.
V.phone answerphone:Connects an incoming videophone call to the Voice Mail Service Center.*1
Call forwarding
:Forwards an incoming videophone call to the forwarding phone number.
*1 The service is not available as of May 2006.
INFORMATION
● Voice Mail Service and Call Forwarding Service are optional subscriber services. Without subscription, even if you set
V.phone answerphone or Call forwarding, the action of Packet DL priority takes place.
● If Voice Mail Service or Call Forwarding Service is activated and the ringing time for each service is set to 0 second,
either service starts its operation, regardless of this setting. Incoming calls are not registered in the received call history.
93
Notify Switchable Mode
■ Checking the current setting: m87173
Making/Receiving Videophone Calls
Using the videophone by connecting with an external device
External Device
By connecting FOMA terminal to an external device such as PC by the FOMA USB cable (optional), you
can make and receive videophone calls from the external device.
To use this function, install a videophone application in a dedicated external device or a PC, and prepare
devices such as an earphone/microphone or USB-compatible Web camera (available in market).
・ This function is not available when FOMA terminal is not connected to an external device.
・ Refer to the instruction manual of external devices for hardware requirements or setting/operating
instructions of videophone applications.
・ The application called “ドコモテレビ電話ソフト 2005 (DoCoMo videophone software 2005)” that is
compatible with this function is available on the DoCoMo videophone software website. Visit the site below
and download it (visit the support website for details of the environment for usage on PC):
External Device
http://videophonesoft.nttdocomo.co.jp/
Default
Terminal
Base station
FOMA videophone
communication
speed: 64K or 32K
FOMA
network
1 m8716
2 Press 1 or 2
INFORMATION
● A videophone call cannot be made from an external device during a voice call.
● When you subscribe to Call Waiting Service, if a videophone call is received through an external device during a voice
call, it is recorded as a missed call in the received call history. The same applies when a voice call, videophone call or
64K data communication is received during a videophone call using an external device.
94
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising