UBP-X800 / UBP-UX80
masterpage:Right
4-687-309-11(1)
Ultra HD Blu-ray™/
DVD Player
Operating Instructions
Getting Started
Playback
Settings and Adjustments
Additional Information
Thank you for your purchase. Before using this player,
please read this operating instructions carefully.
The software of this player may be updated in the future.
Please visit the following website:
http://www.sony.com/bluraysupport/
TM
VIDEO/AUDIO
UBP-X800 / UBP-UX80
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\010COVTOC.f
m
Contents
Owner’s Record
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . 2
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . 3
Getting Started
Supplied Accessories . . . . . . . . . . . . . . . . 7
Guide to Parts and Controls . . . . . . . . . . . 8
Step 1: Connecting the Player . . . . . . . . . 11
Step 2: Network Connection . . . . . . . . . . .13
Step 3: Easy Setup . . . . . . . . . . . . . . . . . . .14
The model and serial numbers are located at the
rear of the unit. Record the serial number in the
space provided below. Refer to them whenever
you call upon your Sony dealer regarding this
product.
Model No.______________
Serial No.______________
For Customers in the USA
If this product is not working properly, please
call 1-800-222-SONY(7669).
For Customers in Canada
Playback
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . .15
Playing from a USB Device . . . . . . . . . . . .15
Playing via a Network . . . . . . . . . . . . . . . .16
Listening to Audio through a Bluetooth®
Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Available Options . . . . . . . . . . . . . . . . . . .18
WARNING
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
Settings and Adjustments
Using the Settings Displays . . . . . . . . . .
[Software Update] . . . . . . . . . . . . . . . . . .
[Accessibility Settings] . . . . . . . . . . . . . . .
[Screen Settings]. . . . . . . . . . . . . . . . . . . .
[Audio Settings] . . . . . . . . . . . . . . . . . . . .
[Bluetooth Settings] . . . . . . . . . . . . . . . . .
[BD/DVD Viewing Settings] . . . . . . . . . . .
[Parental Control Settings]. . . . . . . . . . . .
[Music Settings] . . . . . . . . . . . . . . . . . . . .
[System Settings] . . . . . . . . . . . . . . . . . . .
[Network Settings] . . . . . . . . . . . . . . . . . .
[Easy Setup]. . . . . . . . . . . . . . . . . . . . . . . .
[Resetting]. . . . . . . . . . . . . . . . . . . . . . . . .
If this product is not working properly, please
contact our Customer Information Service
Center at 1-877-899-7669 or write to us at:
Customer Information Service 115 Gordon Baker
Road, Toronto, Ontario, M2H 3R6
20
20
20
20
22
23
23
24
24
24
25
26
26
To avoid electrical shock, do not open the
cabinet.
Refer servicing to qualified personnel only.
Do not expose batteries or appliances with
battery-installed to excessive heat, such as
sunshine and fire.
CAUTION
The use of optical instruments with this product
will increase eye hazard. As the laser beam used
in this Ultra HD Blu-ray /DVD player is harmful to
eyes, do not attempt to disassemble the
cabinet.
Refer servicing to qualified personnel only.
Additional Information
Troubleshooting . . . . . . . . . . . . . . . . . . . 27
Playable discs . . . . . . . . . . . . . . . . . . . . . 30
Playable types of files . . . . . . . . . . . . . . . .31
Specifications . . . . . . . . . . . . . . . . . . . . . . 33
2
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\010COVTOC.f
m
This label is located on the laser protective
housing inside the enclosure.
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
PRECAUTIONS
• To reduce the risk of fire or electric shock,
do not expose this appliance to dripping or
splashing, and do not place objects filled
with liquids, such as vases, on the
appliance.
• Install this unit so that the AC power cord
can be unplugged from the wall socket
immediately in the event of trouble.
• This equipment has been tested and found
to comply with the limits set out in the EMC
Directive using a connection cable shorter
than 3 metres.
• Place the player in a location with adequate
ventilation to prevent heat build-up in the
player.
• To reduce the risk of fire, do not cover the
ventilation opening of the appliance with
newspapers, tablecloths, curtains, etc.
• Do not expose the appliance to naked flame
sources (for example, lighted candles).
• Do not install this player in a confined
space, such as a bookshelf or similar unit.
• Do not place the player outdoors, in
vehicles, on ships, or on other vessels.
• If the player is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense on the
lenses inside the player. Should this occur,
the player may not operate properly. In this
case, remove the disc and leave the player
turned on for about half an hour until the
moisture evaporates.
master page=right
• Do not install the player in an inclined
position. It is designed to be operated in a
horizontal position only.
• Do not place metal objects in front of the
front panel. It may limit reception of radio
waves.
• Do not place the player in a place where
medical equipment is in use. It may cause a
malfunction of medical instruments.
• If you use a pacemaker or other medical
device, consult your physician or the
manufacturer of your medical device before
using the wireless LAN function.
• Do not place heavy or unstable objects on
the player.
• Do not place any objects other than discs on
the disc tray. Doing so may cause damage
to the player or the object.
• Take out any discs from the tray when you
move the player. If you don’t, the disc may
be damaged.
• Disconnect the AC power cord and all other
cables from the player when you move the
player.
• The player is not disconnected from the AC
power source as long as it is connected to
the wall outlet, even if the player itself has
been turned off.
• Disconnect the player from the wall outlet if
you are not going to use the player for a
long time. To disconnect the AC power
cord, grasp the plug itself; never pull the
cord.
• Observe following points to prevent the AC
power cord being damaged. Do not use the
AC power cord if it is damaged, as doing so
may result in an electric shock or fire.
– Do not pinch the AC power cord between
the player and wall, shelf, etc.
– Do not put anything heavy on the AC
power cord or pull on the AC power cord
itself.
• Do not turn up the volume while listening to
a section with very low level inputs or no
audio signals. Your ears and the speakers
may be damaged when the sound level
reaches the peak.
• Clean the cabinet, panel, and controls with
a soft cloth. Do not use any type of abrasive
pad, scouring powder or solvent such as
alcohol or benzine.
• Do not use cleaning discs or disc/lens
cleaners (including wet or spray types).
These may cause the apparatus to
malfunction.
• In the events that this player is repaired,
repaired parts may be collected for reuse or
recycling purposes.
3
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\010COVTOC.f
m
• Observe the following as improper handling
may damage the HDMI OUT jack and the
connector.
– Carefully align the HDMI OUT jack on the
rear of the player and the HDMI connector
by checking their shapes. Make sure the
connector is not upside down or tilted.
– Be sure to disconnect the HDMI cable
when moving the player.
– Hold the HDMI connector straight when
connecting or disconnecting the HDMI
cable. Do not twist or force the HDMI
connector into the HDMI OUT jack.
For United States customers. Not applicable in
Canada, including in the province Of Quebec.
Pour les consommateurs Aux États-Unis. Non
applicable au Canada, y compris la province
de Québec.
FCC WARNING
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
This transmitter must not be co-located or
operated in conjunction with any other
antenna or transmitter.
The shielded Interface cable (LAN cable) and
bundled HDMI Cable or High Speed HDMI
Cable with Cable Type Logo must be used
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
b
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/
TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio
frequency (RF) Exposure Guidelines. This
equipment should be installed and operated
keeping the radiator at least 20cm or more
away from person’s body (excluding
extremities: hands, wrists, feet and ankles).
Contains FCC ID : MCLJ20H086
Compliance with FCC requirement 15.407©
Data transmision is always initiated by
software, which is the passed down through
the MAC, through the digital and analog
baseband, and finally to the RF chip. Several
special packets are initiated by MAC. These
are the only ways the digital baseband
portion will turn on the RF transmitter, which
it then turns off at the end of the packet.
Therefore, the transmitter will be on only
while one of the aforementioned packets is
being transmitted. In other words, this device
automatically discontinue transmission in
case of either absence of information to
transmit or operational failure.
Frequency Tolerance : ± 20 ppm
4
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\010COVTOC.f
m
Important Safety Instructions
1)
2)
3)
4)
5)
6)
7)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of
the obsolete outlet.
10)Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories
specified by the manufacturer.
12)Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13)Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14)Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
master page=right
For Customers in Canada
IC Radiation Exposure Statement:
This equipment complies with IC radiation
exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the IC
radio frequency (RF) Exposure rules. This
equipment should be installed and operated
keeping the radiator at least 20cm or more
away from person’s body (excluding
extremities: hands, wrists, feet and ankles).
Contains IC : 2878D-J20H086
This device complies with Industry Canada’s
licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
• 5 150 - 5 250 MHz band is restricted to indoor
operations only.
• High-power radars are allocated as primary
users (i.e. priority users) of the bands
5 250 - 5 350 MHz and 5 650 - 5 850 MHz and
that these radars could cause interference
and/or damage to LE-LAN devices.
On watching 3D video images
Some people may experience discomfort
(such as eye strain, fatigue, or nausea) while
watching 3D video images. Sony
recommends that all viewers take regular
breaks while watching 3D video images. The
length and frequency of necessary breaks will
vary from person to person. You must decide
what works best. If you experience any
discomfort, you should stop watching the 3D
video images until the discomfort ends;
consult a doctor if you believe necessary. You
should also review (i) the instruction manual
and/or the caution message of any other
device used with, or Blu-ray Disc contents
played with this product and (ii) our website
(http://esupport.sony.com/) for the latest
information. The vision of young children
(especially those under six years old) is still
under development. Consult your doctor
(such as a pediatrician or eye doctor) before
allowing young children to watch 3D video
images. Adults should supervise young
children to ensure they follow the
recommendations listed above.
5
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\010COVTOC.f
m
master page=left
IMPORTANT NOTICE
Caution: This player is capable of holding a
still video image or on-screen display image
on your television screen indefinitely. If you
leave the still video image or on-screen
display image displayed on your TV for an
extended period of time you risk permanent
damage to your television screen. Plasma
display panel televisions and projection
televisions are susceptible to this.
If you have any questions or problems
concerning your player, please consult your
nearest Sony dealer.
6
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\020WAR.fm
master page=right
Getting Started
Supplied Accessories
• High Speed HDMI Cable (1)*
• Remote commander (remote) (1)
• Size AAA (R03) batteries (2)
* Supplied for UBP-UX80
Inserting batteries into the remote
control
Insert two size AAA (R03) batteries by
matching the + and – ends on the batteries to
the markings inside the battery
compartments of the remote.
7
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\030STU.fm
master page=left
Getting Started
Guide to Parts and Controls
Front panel
A
B C
F
A Door tray
B Remote sensor
C Z (open/close)
D 1 (on/standby)
Turns on the player, or sets to standby
mode.
D
E
E Power indicator
Lights up when the player is turned on.
F
(USB) jack cover
Lift the cover to connect a USB
device to this jack. See page 15.
Rear panel
A LAN (100) terminal
B HDMI OUT 1 jack (VIDEO/AUDIO)
Outputs digital video and audio signal.
C HDMI OUT 2 jack (AUDIO ONLY)
Outputs digital audio signal only.
Please remove the attached sticker to use
the jack.
D DIGITAL OUT (COAXIAL) jack
8
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\030STU.fm
Remote
The available functions of the remote are
different depending on the disc or the
situation.
The player automatically returns to standby
mode if no button on the player or remote is
pressed for more than 20 minutes.
A Z OPEN/CLOSE
Opens or closes the door tray.
TV 1 (on/standby)
Turns on the TV, or sets to standby mode.
1 (on/standby)
Turns on the player, or sets to standby
mode.
NET SERVICE
Returns to the previous online service
portal.
TV INPUT
Switches between TV and other input
sources.
Getting Started
z
N PLAY, TV VOL +, and AUDIO buttons have a
tactile dot. Use the tactile dot as a reference
when operating the player.
master page=right
BLUETOOTH (page 17)
• Scan device list will appear if this player
has no paired Bluetooth device.
• Connect to the last connected device if
this player has a paired Bluetooth
device. If the connection fails, scan
device list will appear.
• Disconnect the connected Bluetooth
device.
B Color buttons (YELLOW/BLUE/RED/
GREEN)
Shortcut keys for interactive functions.
C FAVORITE (page 14)
Accesses the application registered as
favorite.
NETFLIX
Accesses the “NETFLIX” online service.
For further NETFLIX online service details,
visit the following website and check the
FAQ:
http://www.sony.com/bluraysupport/
TOP MENU
Opens or closes the Ultra HD Blu-ray/BD/
DVD’s Top Menu.
POP UP/MENU
Opens or closes the Ultra HD Blu-ray/BD/
DVD’s menu.
OPTIONS (page 18)
Displays the available options on the
screen.
RETURN
Returns to the previous display.
9
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\030STU.fm
</M/m/,
Moves the highlight to select a displayed
item.
z
• M/m as a shortcut key to launch track
search window and input track number
during music CD playback.
• M/m as a shortcut key to rotate photo
clockwise/counterclockwise by 90
degrees.
• </, as a shortcut key to perform seek
functions during Home Network video
playback.
• </, as a shortcut key to change still
image when it is enabled to change.
Center button (ENTER)
Enters the selected item.
HOME
Enters the player’s home screen.
D m/M (fast reverse/fast forward)
• Fast reverse/fast forward the disc when
pressed during playback. The search
speed changes each time you press the
button.
• Plays in slow motion when pressed for
more than one second in pause mode.
• Plays one frame at a time when pressed
for a short time in pause mode.
N PLAY
Starts or re-starts playback.
. PREV/NEXT >
Skips to the previous/next chapter, track,
or file.
X PAUSE
Pauses or re-starts playback.
SUBTITLE (page 23)
Selects the subtitle language when multilingual subtitles are recorded on Ultra HD
Blu-ray/BD/DVD.
x STOP
Stops playback and remembers the stop
point (resume point).
The resume point for a title/track is the
last point you played or the last photo for
a photo folder.
AUDIO (page 23)
Selects the language track when multilingual tracks are recorded on Ultra HD
Blu-ray/BD/DVD.
Selects the sound track on CDs.
MUTING
Turns off the TV sound temporarily.
TV VOL +/–
Adjusts the TV volume.
DISPLAY
Displays the playback information on the
screen.
To lock the disc tray (Child Lock)
You can lock the disc tray to avoid accidental
opening of the tray.
While the player is turned on, press x STOP,
HOME, and then TOP MENU button on the
remote to lock or unlock the tray.
Code numbers of controllable TVs
Hold down TV 1 and the TV manufacturer’s
code using the remote buttons for 2 seconds.
Manufacturer
Remote Button
Sony (Default)
NET SERVICE
Hitachi
TV INPUT
LG/Goldstar/NEC
BLUETOOTH
Toshiba
Color button
(YELLOW)
RCA
Color button
(BLUE)
Mitsubishi/MGA
Color button
(RED)
Pioneer
Color button
(GREEN)
Sharp
FAVORITE
Panasonic
NETFLIX
Samsung
TOP MENU
Philips
POP UP/MENU
Vizio 1
RETURN
Vizio 2
OPTIONS
Vizio 3
HOME
10
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\030STU.fm
master page=right
Step 1: Connecting the Player
Do not connect the AC power cord until you have made all the connections.
Connecting to your TV
Getting Started
HDMI Cable*1*2
*1
*2
See “Supplied Accessories” (page 7).
Premium High Speed HDMI Cable (not supplied) or High Speed HDMI Cable that supports 18 Gbps
bandwidth (not supplied).
b
• To enjoy 4K Ultra HD 60p content, you need to connect the player to your 4K TV using Premium High
Speed HDMI Cable or High Speed HDMI Cable that supports 18 Gbps bandwidth.
• 4K output requires a compatible 4K display which has HDCP2.2 capable HDMI input.
• If you use BRAVIA TV that supports 4K60p, set the TV’s “HDMI signal format” setting to “Enhanced
format”.
11
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\030STU.fm
Connecting to your AV amplifier (receiver)
Select A, B or C connection methods according to the input jacks on your AV amplifier
(receiver).
A 4K AV amplifier (receiver)
HDMI Cable*1*2
HDMI Cable*1*2
t To enjoy Bitstream (Dolby/DTS), set [BD Audio MIX Setting] in [Audio Settings] (page 22).
B Non-4K AV amplifier (receiver) with HDMI IN
HDMI Cable*1*2
High Speed HDMI Cable
(not supplied)
C Non-4K AV amplifier (receiver) without HDMI IN
Coaxial digital cable
(not supplied)
HDMI Cable*1*2
*1
*2
See “Supplied Accessories” (page 7).
Premium High Speed HDMI Cable (not supplied) or High Speed HDMI Cable that supports 18 Gbps
bandwidth (not supplied).
12
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\030STU.fm
Step 2: Network Connection
If you are not going to connect the player to a network, proceed to “Step 3: Easy Setup”
(page 14).
Wired Setup
LAN cable
(not supplied)
Router
Modem
Getting Started
LAN cable
(not supplied)
Internet
z
The use of a shielded and straight interface cable (LAN cable) is recommended.
Wireless Setup
LAN cable
(not supplied)
Wireless LAN
Router
Modem
Internet
z
No cable assembly required between the player and the wireless LAN router.
13
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\030STU.fm
Step 3: Easy Setup
When turned on for the first time
Wait for a short while before the player
turns on and starts [Easy Setup].
1 Plug the player into the AC outlet.
master page=left
Home screen display
The home screen appears when you press
HOME. Select an application using
</M/m/,, and press ENTER.
Application
Tools
Ultra
U
ltra HD Blu-ray
ayy Player
y
to AC outlet
2 Press 1 to turn on the player. Power
indicator lights up.
.
3 Turn on the TV and press TV INPUT button
on the remote to set the input selector.
This will show the signal from the player
on your TV screen.
4 Perform [Easy Setup].
Follow the on-screen instructions to make
the basic settings using </M/m/, and
press ENTER on the remote.
</M/m/,
ENTER
b
• When [Easy Setup] is complete, the player will
automatically find the available network.
• If there is no output or black screen appears,
refer to “Troubleshooting” (page 27).
[My Apps]: Manages favorite application.
You may add shortcuts for application from
[All Apps].
[Featured Apps]: Displays recommended
application.
[All Apps]: Shows all available applications.
You can add applications to [My Apps] by
pressing OPTIONS, and select [Add to My
Apps].
[Setup]: Adjusts the player’s settings.
Available options
Various settings and playback operations are
available by pressing OPTIONS. The available
items differ depending on the situation.
[Move Application]: Arranges applications in
[My Apps].
[Remove Application]: Deletes applications
in [My Apps].
[Register as Favorite]: Registers 1
application into FAVORITE remote button.
[Data Contents]: Displays the contents of the
mixed disc.
14
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\040PLY.fm
master page=right
Enjoying Blu-ray 3D
Playback
Playing a Disc
For “Playable discs”, see page 30.
1 Press Z OPEN/CLOSE, and place a disc on
the disc tray.
1 Prepare for Blu-ray 3D disc playback.
• Connect the player to your 3Dcompatible devices using a High Speed
HDMI Cable.
• Set [3D Output Setting] and [TV Screen
Size Setting for 3D] in [Screen Settings]
(page 20).
Playing side facing down
Playback
2 Insert a Blu-ray 3D disc.
The operation method differs depending
on the disc. Refer to the instruction
manual supplied with the disc.
z
Refer also to the instruction manuals supplied
with your TV and the connected device.
2 Press Z OPEN/CLOSE to close the disc
tray.
Playback starts.
If playback does not start automatically,
select [Video], [Music], or [Photo] category
in
(Disc), and press ENTER.
Playing from a USB Device
z
1 Lift the USB jack cover.
For “Playable types of files”, see page 31.
(Mixed disc) contains data contents. Press
OPTIONS on the remote and select [Data
Contents] to display any available contents.
Enjoying 4K Ultra HD Blu-ray
1 Prepare for 4K Ultra HD Blu-ray playback.
• Connect the player to your 4K TV using
a Premium High Speed HDMI Cable.
• To view 4K Ultra HD 60p content, make
sure that the proper setting is selected
in HDMI settings on your TV.
• If you use BRAVIA TV that supports
4K60p, set the TV’s “HDMI signal
format” setting to “Enhanced format”.
2 Insert a 4K Ultra HD Blu-ray disc.
The operation method differs depending
on the disc. Refer to the instruction
manual supplied with the disc.
2 Connect the USB device to the USB jack on
the player.
3 Select
[USB device] using
</M/m/,, and press ENTER.
4 Select [Video], [Music], or [Photo] category
using M/m, and press ENTER.
b
When playing a 4K Ultra HD Blu-ray disc with no
disc key, it may require network connection
depending on the network environment and
official key server (Studio).
15
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\040PLY.fm
Playing via a Network
Playing files on a Home Network
A Home Network-compatible product can
play video/music/photo files stored on
another Home Network-compatible product
via a network.
Prepare to use Home Network.
1 Connect the player to a network (page 13).
2 Prepare the other necessary Home
Network-compatible products. Refer to
the instruction manual supplied with the
product.
To play a file from a Home Network server via
this unit (Home Network player)
Using “Video & TV SideView”
“Video & TV SideView” is a free mobile
application for remote devices (such as
smartphone, etc.). By using “Video & TV
SideView” with this player, you can easily
enjoy the player by using the operation on
your remote device. You can launch a service
or application directly from the remote device
and view the disc information during disc
playback. “Video & TV SideView” also can be
used as a remote control and software
keyboard.
Before you use the “Video & TV SideView”
device with this player for the first time, be
sure to register the “Video & TV SideView”
device. Follow the on-screen instructions on
the “Video & TV SideView” device for
registration.
b
The registration can only be performed on the
home screen.
Using SongPal Link/SongPal
Server
Player
Select [Video], [Music], or [Photo] category
from
[Media Server] in [All Apps], then
choose the file you want to play.
To play a file from a Home Network server via
another product (Renderer)
When you play files from a Home Network
Server on this unit, you can use a Home
Network Controller-compatible product (a
phone, etc.), to control playback.
SongPal is a dedicated app for operating
SongPal-compatible audio devices (e.g.
wireless speaker) that are manufactured by
Sony. You can listen to music stored on your
audio CD (CD-DA) and USB device with this
player from multiple places under the same
network. For more information, please visit
http://sony.net/nasite/. You are required to
use your mobile device (smartphone or
tablet) and wireless router to use this app.
Search for SongPal on Google Play™ or the
App Store and download using your mobile
device.
Server
Renderer
Controller
Control this unit using a Home Network
controller. Refer to the instruction manual
supplied with the Home Network controller.
16
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\040PLY.fm
Connecting to a mobile device
1 Connect the player to a network (page 13).
2 Set [Auto Home Network Access
Permission] in [Network Settings] to [On].
3 Connect your mobile device to the same
SSID (network) by Wi-Fi.
4 Launch and follow the instructions on
SongPal app.
You can enjoy wireless playback of audio
from this player on a Bluetooth wireless
technology compatible device.
You need to pair the Bluetooth device and
this player to each other before connection.
b
This function is only supported with Bluetooth
speaker or Bluetooth headphone. Smartphone is
not supported.
Playback
z
• For further SongPal apps details, visit
http://songpal.sony.net/
• For SongPal Link/SongPal Help, visit
http://info.songpal.sony.net/help/
Listening to Audio through a
Bluetooth® Device
Example:
Using Screen mirroring
“Screen mirroring” is a function to display the
screen of a mobile device on the TV by
Miracast technology.
The player can be connected directly with a
Screen mirroring compatible device (e.g.
smartphone, tablet). You can enjoy the
display screen of the device on your large TV
screen. No wireless router (or access point) is
required to use this feature.
b
• When using Screen mirroring, the quality of
picture and sound may sometimes be
deteriorated due to interference from other
network. You may improve by adjusting
[Screen mirroring RF Setting] (page 25).
• Some network functions may not be available
during Screen mirroring.
• Make sure that the device is compatible with
Miracast. Connectivity with all Miracast
compatible devices is not guaranteed.
1 Select
[Screen mirroring] from home
screen using </M/m/,, and press
ENTER.
2 Follow the on-screen instructions.
Headphone
or
Smartphone
Player
Speaker
Connecting to a Bluetooth device
Set [Bluetooth Mode] in [Bluetooth Settings]
to [On] (page 23) before pairing a Bluetooth
device with this player.
1 Place the Bluetooth device within 1 meter
from the player.
2 Perform any of the following steps:
– When connecting to a device for the
first time, press BLUETOOTH button on
the remote.
– Select [Bluetooth Device] option on the
playback screen.
– Select [Device List] in [Bluetooth
Settings].
3 Set the Bluetooth device in pairing mode.
For details on setting the Bluetooth device
in pairing mode, refer to the instruction
manual supplied with the device.
4 Press M/m repeatedly to select the device
you want, and press ENTER.
When the Bluetooth connection is
established, the device name will appear
on the TV screen.
17
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\040PLY.fm
Adjusting the Volume
1 Start playback content.
2 Adjust the volume of the Bluetooth device
first. If the volume level is still low/high,
press OPTIONS on the remote during
playback screen and select [Bluetooth
Volume], then press M/m to adjust the
volume.
b
• Some Bluetooth device does not support
volume control.
• Do not use high volume from the start or for a
long period. Your ears and the audio device
may be damaged.
Disconnecting the Bluetooth device
Available Options
Various settings and playback operations are
available by pressing OPTIONS. The available
items differ depending on the situation.
Common options
x
x
x
x
x
x
Perform any of the following steps:
– Press BLUETOOTH button on the remote
(page 9).
– Disable the Bluetooth function on the
Bluetooth device.
– Turn off the player or the Bluetooth device.
x
b
Before you turn off your Bluetooth device, turn
down the volume level of your TV to avoid
sudden high volume outbursts.
Video only
x
Listening to Audio through a
Bluetooth device and HDMI output
x
You can enjoy audio playback from this
player via a Bluetooth device and HDMI
output simultaneously.
To set this function, perform any of the
following steps:
– Set [Bluetooth Output] in [Bluetooth
Settings] to [Bluetooth + HDMI].
– Press OPTIONS on the remote during any
playback and select [Bluetooth Output],
then select [Bluetooth + HDMI].
x
b
– Same audio content is output via Bluetooth
device and HDMI output.
– This feature cannot establish Surround system.
– HDMI audio format may be changed.
– Audio output timing between HDMI and
Bluetooth may not synchronize.
– If the Bluetooth speaker is far from the player,
in a different room, or separated by a wall,
Bluetooth connection will be unstable.
[Repeat Setting]*1: Sets the repeat mode.
[Play]/[Stop]: Starts or stops the playback.
[Play from beginning]: Plays the item
from the beginning.
[Bluetooth Output]*2: Switches between
audio output from Bluetooth device only or
from both Bluetooth device and HDMI
output during Bluetooth connection.
[Bluetooth Device]*2: Displays Bluetooth
device list.
[Bluetooth Volume]*2: Displays the
Bluetooth volume control view. This option
item is only available when the Bluetooth
device is connected.
[Accessibility]*3*4:
–[Screen Reader]
–[Enlarge]
–[Closed Captions] (For US customers only)*5
x
[3D Output Setting]: Sets whether or not
to output 3D video automatically.
[A/V SYNC]: Adjusts the gap between
picture and sound, by delaying the sound
output in relation to the picture output (0
to 120 milliseconds).
[HDR Conversion]*6: Converts High
Dynamic Range (HDR) signal to Standard
Dynamic Range (SDR) signal when the
player is connected to a TV or a Projector
that does not support HDR input. A picture
is more similar to HDR when larger value is
selected, but lowers overall brightness.
[Video Settings]:
– [Picture Quality Mode]: Selects the
picture settings for different lighting
environments.
z [Direct]
*7
z [Brighter Room]
*7
z [Theater Room]
z [Auto]
18
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\040PLY.fm
x
x
x
x
x
x
x
Photo only
x
x
x
x
x
Music only
x
x
x
x
x
[Track Search]: Searches the track number
during music CD playback.
[Add Slideshow BGM]: Registers music
files in the USB memory as slideshow
background music (BGM).
[Music Search]: Displays information on
the audio CD (CD-DA) based on Gracenote
technology.
Searches for related information using
keywords from Gracenote when selecting
[Track], [Artist] or [Related].
Displays a list of titles when selecting
[Playback History] or [Search History].
[Shuffle Setting]: Set to [On] to playback
music files in randomized order.
[Group Search]: Searches for the group
number during DVD AUDIO playback.
Video and Music only
x
x
x
x
[Top Menu]: Displays the Ultra HD Blu-ray/
BD/DVD’s Top Menu.
[Menu]/[Popup Menu]: Displays the Ultra
HD Blu-ray/BD’s Pop-up Menu or DVD’s
menu.
[Audio]: Switches the language track when
multilingual tracks are recorded on Ultra
HD Blu-ray/BD/DVD. Selects the sound
track on CDs.
[Subtitle]: Switches the subtitle language
when multilingual subtitles are recorded
on Ultra HD Blu-ray/BD/DVD.
[Angle]: Switches to other viewing angles
when multi-angles are recorded on Ultra
HD Blu-ray/BD/DVD.
[Number Entry]: Selects the number by
using </M/m/, key on the remote.
x
x
x
x
[Slideshow Speed]: Changes the
slideshow speed.
[Slideshow Effect]: Sets the effect for
slideshows.
[Slideshow BGM]*8:
– [Off]: Turns off the function.
– [My Music from USB]: Sets the music files
registered in [Add Slideshow BGM].
– [Play from Music CD]: Sets the tracks in
CD-DAs.
[2D Playback]*9: Sets playback to 2D
image.
[Change Display]: Switches between
[Grid View] and [List View].
[View Image]: Displays the selected
photo.
[Slideshow]: Plays a slideshow.
[Rotate Left]: Rotates the photo
counterclockwise by 90 degrees.
[Rotate Right]: Rotates the photo
clockwise by 90 degrees.
Playback
[Custom1]/[Custom2]
[FNR]: Reduces the random noise
appearing in the picture.
x [BNR]: Reduces the mosaic-like block
noise in the picture.
x [MNR]: Reduces minor noise around
the picture outlines (mosquito noise).
x [Contrast]
x [Brightness]
x [Color]
x [Hue]
[Pause]: Pauses the playback.
[Title Search]: Searches for a title on Ultra
HD Blu-ray/BD/DVD VIDEO and starts
playback from the beginning.
[Chapter Search]: Searches for a chapter
and starts playback from the beginning.
[Closed Captions] (For US customers
only): Selects closed caption format when
available.
z
b
*1
*2
*3
*4
*5
*6
*7
*8
*9
[Repeat Setting] is not available during BDJ
titles playback or HDMV interactive title.
[Bluetooth Output], [Bluetooth Device] and
[Bluetooth Volume] are not available during
Home Network photo playback.
[Accessibility] is only available when
[Accessibility Shortcut] in [Accessibility
Settings] is set to [On].
[Accessibility] is not available during photo or
music playback.
[Closed Captions] is only available during
video playback.
[HDR Conversion] is only available during
HDR video playback, when your display
device is not compatible with HDR display, or
when [HDR Output] in [Screen Settings] is set
to [Off].
[Brighter Room] and [Theater Room] are not
available during HDR video playback.
[Slideshow BGM] is not available during
Home Network photo playback.
[2D Playback] is only available during 3D
photo playback.
19
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\060ADD.fm
Settings and Adjustments
Using the Settings Displays
Select
[Setup] on the home screen when
you need to change the settings of the
player.
The default settings are underlined.
1 Select
[Setup] on the home screen
using </M/m/,.
2 Select the setup category icon using M/m,
and press ENTER.
[Speech Rate]
[Very Fast] / [Fast] / [Normal] / [Slow] / [Very
Slow]: Sets the reading speed.
[Speech Volume]
[High] / [Medium] / [Low]: Sets the reading
volume.
[Prioritize Speech Audio]
[On]: Lowers the background sound volume
when the sound overlaps with the read-out
speech or the auditory signal.
[Off]: Turns off the function.
[Speech Verbosity]
[High]: Read-out in detailed style.
[Low]: Read-out in simplified style.
b
This setting works with NETFLIX service only.
[Software Update]
x [Update via Internet]
Updates the player’s software using available
network. Make sure that the network is
connected to the Internet. See “Step 2:
Network Connection” (page 13).
x [Update via USB Memory]
Updates the player’s software using USB
memory. Create a folder named “UPDATE”
and all the update files must be stored in this
folder. The player can recognize up to 500
files/folders in a single layer including the
update files/folders.
z
• We recommend performing the software
update every 2 months or so.
• If your network condition is poor, visit
http://www.sony.com/bluraysupport/ to
download the latest software version and
update via USB memory.
You can also get information about update
functions from the website.
[Accessibility Settings]
x [Screen Reader Settings]
[Screen Reader]
[On]: Turns on the function.
[Off]: Turns off the function.
x [Enlarge]
[On]: Text is displayed in large size.
[Off]: Text is displayed in normal size.
x [Auto-Scroll Speed]
[Fast] / [Normal] / [Slow] / [Very Slow]: Sets
the speed of automatic text scrolling.
x [Accessibility Shortcut]
[On]: Turns on the shortcut in options
window.
[Off]: Turns off the shortcut.
[Screen Settings]
x [HDR Output]
[Auto]: Outputs HDR signal depending on
contents and HDMI-SINK capability.
Conversion function is applied when content
is HDR and HDMI-SINK does not support HDR.
[Off]: Always output SDR.
x [Display Type]
[TV]: Select this when the player is connected
to TV.
[Projector]: Select this when the player is
connected to Projector.
z
[HDR Conversion] will be adjusted according to
the display type you select. Even though same
setting value of [HDR Conversion] is selected,
dynamic range of picture is different.
20
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\060ADD.fm
x [Output Video Resolution]
Normally select [Auto]. Select [Original
Resolution] to output the resolution recorded
on the disc. When the resolution is lower than
the SD resolution, it is scaled up to the SD
resolution.
x [24p Output]
Outputs 24p video signals only when you
connect a 24p-compatible TV via an HDMI
connection and the [Output Video
Resolution] is set to [Auto], [1080p] or [4K].
[DVD-ROM]
[Auto]: Outputs 24 Hz video signals only
when connecting a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.
[Data content]
This function is available for playback
contents stored in USB memory or data disc.
[Auto]: Outputs 24 Hz video signals only
when connecting a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.
[Network content]
This function is available for playback
contents from other network, such as Home
Network, Screen mirroring, etc.
[Auto]: Outputs 24 Hz video signals only
when connecting a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.
x [4K Upscale Setting]
[Auto1]: Outputs 2K (1920 × 1080) video
signals during video playback and 4K video
signals during photo play when connecting
to a Sony 4K-compatible equipment.
Outputs 4K video signals when connecting to
a non-Sony 4K-compatible equipment.
This setting does not work for 3D video image
playback.
b
If your Sony equipment is not detected when
[Auto1] is selected, the setting will have the
same effect as [Auto2] setting.
x [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the connected
TV type, and switches to the matching color
setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video
signals.
[RGB]: Outputs RGB video signals.
Settings and Adjustments
[Ultra HD Blu-ray/BD-ROM]
[Auto]: Outputs 24 Hz video signals only
when connecting a 24p-compatible TV using
the HDMI OUT jack.
[On]: Turns on the function.
[Off]: Select this when your TV is not
compatible with 24p video signals.
[Auto2]: Automatically outputs 4K video
signals when you connect a 4K-compatible
equipment.
[Off]: Turns off the function.
x [HDMI Deep Color Output]
[Auto]: Outputs 12bit/10bit video signals
when the connected TV is compatible with
Deep Color.
[Off]: Select this when the picture is unstable
or colors appear unnatural.
x [IP Content NR]
[Auto] / [Strong] / [Medium] / [Mild]: Adjust
the picture quality for Internet content.
[Off]: Turns off the function.
x [3D Output Setting]
[Auto]: Normally select this.
[Off]: Select this to display all content in 2D or
to enjoy 4K output using 3D content.
x [TV Screen Size Setting for 3D]
Sets the screen size of your 3D-compatible
TV.
x [TV Type]
[16:9]: Select this when connecting to a widescreen TV or a TV with a wide mode function.
[4:3]: Select this when connecting to a 4:3
screen TV without a wide mode function.
x [Screen Format]
[Full]: Select this when connecting to a TV
with a wide mode function. Displays a 4:3
screen picture in 16:9 aspect ratio even on a
wide-screen TV.
[Normal]: Changes the picture size to fit the
screen size with the original picture aspect
ratio.
21
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\060ADD.fm
x [DVD Aspect Ratio]
[Letter Box]: Displays a wide picture with
black bands on the top and bottom.
[Pan & Scan]: Displays a full-height picture on
the entire screen, with trimmed sides.
x [Cinema Conversion Mode]
[Auto]: Normally select this. The player
automatically detects whether the material is
video-based or film-based, and switches to
the appropriate conversion method.
[Video]: The conversion method suited for
video-based material will always be selected
regardless of the material.
x [Pause Mode]
[Auto]: Normally select this. Dynamic moving
pictures appear without blurring.
[Frame]: Displays static pictures at high
resolution.
x [BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing
the interactive and secondary audio to the
primary audio.
[Off]: Outputs the primary audio only. Select
this to output Bitstream (Dolby/DTS) signals
to an AV amplifier (receiver).
z
To enjoy Bitstream (Dolby/DTS) signals, set [BD
Audio MIX Setting] to [Off] and [Digital Audio
Output] to [Auto].
x [DTS Neo:6]
[Cinema]/[Music]: Outputs the simulated
multi-channel sound from 2 channel sources
via the HDMI OUT jack according to the
capability of the connected device using
[Cinema]/[Music] mode.
[Off]: Outputs the sound with its original
number of channels via the HDMI OUT jack.
b
[Audio Settings]
x [Digital Audio Output]
[Auto]: Normally select this. Outputs audio
signals according to the status of the
connected devices.
[PCM]: Outputs PCM signals from the DIGITAL
OUT (COAXIAL)/HDMI OUT jack. Select this if
there is no output from the connected device.
b
This function is disabled during connection with
a Bluetooth device. Audio format may be
changed during Bluetooth connection.
x [DSD Output Mode]
[Auto]: Outputs DSD signal from HDMI OUT
jack when playing Super Audio CD & DSD
format file (if the connected device also
supports DSD).
Outputs LPCM signal from HDMI OUT jack
when playing Super Audio CD & DSD format
file (if the connected device does not support
DSD).
[Off]: Outputs PCM signals from HDMI OUT
jack when playing Super Audio CD and DSD
format file.
When [DTS Neo:6] is set to [Cinema] or [Music],
[DSEE HX] cannot be set to [On].
x [48kHz/96kHz/192kHz PCM]
[48kHz]/[96kHz]/[192kHz]: Sets the sampling
frequency for the PCM signals output from
the DIGITAL OUT (COAXIAL) jack.
b
Some device does not support [96kHz] and
[192kHz] sampling frequency.
x [DSEE HX]
[On]: Upscales the audio file to a HighResolution Audio file and reproduces the
clear high-range sound which is often lost.
[Off]: Turns off the function.
b
Source must be 2ch and 44.1/48 kHz.
x [Audio DRC]
[Auto]: Performs playback at the dynamic
range specified by the disc (BD-ROM only).
Other discs are played back at the [On] level.
[On]: Performs playback at a standard
compression level.
[Off]: No compression works. A more
dynamic sound is produced.
b
This function is disabled during connection with
a Bluetooth device. Audio format may be
changed during Bluetooth connection.
22
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\060ADD.fm
x [Downmix]
[Surround]: Outputs audio signals with
surround effects. Select this when connecting
an audio device that supports Dolby
Surround (Pro Logic) or DTS Neo:6.
[Stereo]: Outputs audio signals without
surround effects. Select this when connecting
an audio device that does not support Dolby
Surround (Pro Logic) or DTS Neo:6.
[Bluetooth Settings]
x [Bluetooth Mode]
[On]: Enables Bluetooth settings and
functions.
[Off]: Disables Bluetooth settings and
functions.
x [Device List]
Displays a list of paired and detected
Bluetooth receivers when [Bluetooth Mode]
is set to [On].
x [Bluetooth Codec - AAC] / [Bluetooth
Codec - LDAC]
This function is enabled when [Bluetooth
Mode] is set to [On].
[On]: Enables AAC/LDAC codec.
[Off]: Disables AAC/LDAC codec.
b
This function is disabled during connection with
a Bluetooth device.
z
LDAC is an audio coding technology developed
by Sony that enables the transmission of HighResolution (Hi-Res) Audio content, even over a
Bluetooth connection. Unlike other Bluetooth
compatible coding technologies such as SBC, it
operates without any down-conversion of the
Hi-Res Audio content*, and allows
approximately three times more data** than
those other technologies to be transmitted over
a Bluetooth wireless network with
unprecedented sound quality, by means of
efficient coding and optimized packetization.
* Excluding DSD format contents.
** In comparison with SBC (Subband Coding)
when the bitrate of 990 kbps (96/48 kHz) or
909 kbps (88.2/44.1 kHz) is selected.
x [Wireless Playback Quality]
This function is enabled when [Bluetooth
Mode] and [Bluetooth Codec - LDAC] is set to
[On]. If video streaming via Wi-Fi is unstable,
please select [Connection] in below setting
and Wi-Fi connection will be stable.
[Auto]: Sets the transmission data rate for
LDAC automatically.
[Sound Quality]: The highest data rate is
used. It is recommended for listening to
music, but audio playback may become
unstable if the link quality is not sufficient.
[Standard]: A medium data rate is used. This
provides a balance between sound quality
and playback stability.
[Connection]: Stability is prioritized. The
sound quality may be reasonable and the
connection status will most likely be stable.
Settings and Adjustments
For “Listening to Audio through a Bluetooth®
Device”, see page 17.
master page=right
x [Bluetooth Output] (page 18)
[Bluetooth]: Outputs audio from Bluetooth
device.
[Bluetooth + HDMI]: Outputs audio from both
Bluetooth device and HDMI output.
[BD/DVD Viewing
Settings]
x [BD/DVD Menu Language]
Selects the default menu language for Ultra
HD Blu-ray/BD/DVD VIDEO.
Select [Select Language Code], and enter the
code for your language, referring to
“Language code list” (page 39).
x [Audio Language]
Selects the default audio language for Ultra
HD Blu-ray/BD/DVD VIDEO.
When you select [Original], the language
given priority in the disc is selected.
Select [Select Language Code], and enter the
code for your language, referring to
“Language code list” (page 39).
x [Subtitle Language]
Selects the default subtitle language for Ultra
HD Blu-ray/BD/DVD VIDEO.
Select [Select Language Code], and enter the
code for your language, referring to
“Language code list” (page 39).
x [BD Hybrid Disc Playback Layer]
[BD]: Plays BD layer.
[DVD/CD]: Plays DVD or CD layer.
23
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\060ADD.fm
x [BD Internet Connection]
[Allow]: Allows Internet connection from BD
contents.
[Do not allow]: Prohibits Internet connection
from BD contents.
x [Delete BD Data]
Deletes data in the USB memory.
All data stored in the buda folder will be
erased.
x [DVD-Audio Playback]
[DVD-Audio]: Plays DVD AUDIO content.
[DVD-Video]: Plays DVD VIDEO content only.
master page=left
[Music Settings]
x [Super Audio CD Playback Layer]
[Super Audio CD]: Plays the Super Audio CD
layer.
[CD]: Plays the CD layer.
x [Super Audio CD Playback Channel]
[DSD 2ch]: Plays the 2ch area.
[DSD Multi]: Plays the multi-channel area.
[System Settings]
[Parental Control
Settings]
x [Password]
Sets or changes the password for the
Parental Control function. A password allows
you to set a restriction on Ultra HD Blu-ray/
BD/DVD VIDEO and Internet video playback.
If necessary, you can differentiate the
restriction levels for Ultra HD Blu-ray/BD/DVD
VIDEO and Internet video.
x [Parental Control Area Code]
Playback of some Ultra HD Blu-ray/BD/DVD
VIDEO or Internet video can be limited
according to the geographic area. Scenes
may be blocked or replaced with different
scenes. Follow the on-screen instructions and
enter your four-digit password.
x [BD Parental Control] /
[DVD Parental Control] /
[Internet Video Parental Control]
By setting Parental Control, scenes can be
blocked or replaced with different scenes.
Follow the on-screen instructions and enter
your four-digit password.
x [Internet Video Unrated]
[Allow]: Allows the playback of unrated
Internet videos.
[Block]: Blocks the playback of unrated
Internet videos.
x [OSD Language]
Selects on-screen display language for your
player.
x [Closed Caption Settings] (For US
customers only)
Customizes the format of Closed Caption
displayed.
Select [Original] in [Text Settings] setting to
disable.
x [HDMI Settings]
By connecting Sony components that are
compatible with HDMI functions with a High
Speed HDMI Cable, operation is simplified.
[Control for HDMI]
[On]: The following BRAVIA Sync features are
available:
– One-Touch Play
– System Power-Off
– Language Follow
[Off]: Turns off the function.
z
For details, refer to the instruction manual
supplied with the TV or components. To enable
the BRAVIA Sync features, connect your TV via
the HDMI OUT 1 jack.
[Linked to TV-off]
[Valid]: Automatically turns off the player
when the connected TV enters standby mode
(BRAVIA Sync).
[Invalid]: Turns off the function.
24
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\060ADD.fm
x [HDMI Audio Output]
[Auto]: Outputs audio signal via HDMI OUT 2
jack if it is connected to a device and the
device is turned on. Otherwise, outputs audio
signal via HDMI OUT 1 jack.
[HDMI1]: Outputs audio signal via HDMI OUT 1
jack.
[HDMI2]: Outputs audio signal via HDMI OUT
2 jack.
x [Quick Start Mode]
[On]: Shortens the startup time when turning
on the player.
[Off]: Reduces standby power consumption.
x [Software Update Notification]
[On]: Sets the player to inform you of newer
software version information (page 20).
[Off]: Turns off the function.
x [Gracenote Settings]
[Auto]: Automatically downloads audio CD
(CD-DA) disc information before audio CD
(CD-DA) disc playback after audio CD (CD-DA)
disc recognition. Connect to the network for
downloading.
[Manual]: Downloads the disc information
when [Music Search] is selected.
x [Device Name]
Displays the player’s name. The player’s
name can be changed.
x [System Information]
Displays the player’s software version
information and the MAC address.
x [Software License Information]
Displays information about the Software
License.
[Network Settings]
x [Internet Settings]
Connect the player to the network
beforehand. For details, see “Step 2: Network
Connection” (page 13).
[Wired Setup]: Select this when you connect
to a broadband router using a LAN cable.
[Wireless Setup]: Select this when you use
the wireless LAN that is built into the player
for wireless network connection.
z
For further details, visit the following website
and check the FAQ contents:
http://www.sony.com/bluraysupport/
Settings and Adjustments
x [Auto Display]
[On]: Automatically displays information on
the screen when changing the viewing titles,
picture modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
master page=right
x [Network Connection Status]
Displays the current network status.
x [Network Connection Diagnostics]
Checks for the proper network connection by
running the network diagnostics.
x [Screen mirroring RF Setting]
[Auto]: Sets the RF (Radio Frequency) channel
band automatically for Screen mirroring
connection.
[CH 1]/[CH 6]/[CH 11]: Sets CH 1/CH 6/CH 11 as
priority.
x [Connection Server Settings]
Sets whether or not to display the connected
server.
x [Auto Home Network Access Permission]
[On]: Allows automatic access from newly
detected Home Network controllercompatible product.
[Off]: Turns off the function.
x [Home Network Access Control]
Displays a list of Home Network controllercompatible products and sets whether or not
to accept commands from the controllers in
the list.
x [Registered Remote Devices]
Displays a list of your registered remote
devices.
x [Remote Start]
[On]: Allows you to turn on the player by a
device linked via a network.
[Off]: Turns off the function.
25
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\060ADD.fm
master page=left
[Easy Setup]
See “Step 3: Easy Setup” (page 14).
[Resetting]
x [Reset to Factory Default Settings]
Resets the player settings to the factory
default by selecting the group of settings. All
the settings within the group will be reset.
x [Initialize Personal Information]
Erases your personal information stored in
the player.
b
If you dispose, transfer or resell this unit, please
delete all Personal Information for security
purposes. Please take the appropriate measures
such as logging out after using a network
service.
26
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
Sound
Additional Information
Troubleshooting
If a problem occurs while operating the
player, use this troubleshooting guide to help
remedy the problem before requesting
repairs. If the problem persists, consult your
nearest Sony dealer.
Picture
The display language on the screen
switches automatically when connected to
the HDMI OUT jack.
• When [Control for HDMI] in [HDMI Settings]
is set to [On] (page 24), the display
language on the screen automatically
switches according to the language setting
of the connected TV (if you change the
setting on your TV, etc.).
Additional Information
No picture or the picture is not output
correctly.
• Check that all the cables are securely
connected (page 11).
• Switch the input selector on your TV to
display the signal from the player.
• Reset the [Output Video Resolution] to the
lowest resolution by pressing x STOP,
HOME, and then POP UP/MENU button on
the remote.
• Try the following: 1Turn the player off and
on again. 2Turn the connected equipment
off and on again. 3Disconnect and then
reconnect the HDMI cable.
• The HDMI OUT jack is connected to a DVI
device that does not support copyright
protection technology.
• Check the [Output Video Resolution]
settings in [Screen Settings] (page 21).
• For Ultra HD Blu-ray/BD-ROM/DVD-ROM/
Data content/Network content, check the
[24p Output] settings in [Screen Settings]
(page 21).
• For 4K output, please make sure that the
player is connected to 4K display that
supports HDCP2.2 capable HDMI input
using Premium High Speed HDMI Cable or
High Speed HDMI Cable that supports 18
Gbps bandwidth (page 11).
No sound or the sound is not output correctly.
• Check that all the cables are securely
connected (page 12).
• Switch the input selector on your AV amplifier
(receiver) so that the audio signals of the
player are output from your AV amplifier
(receiver).
• If the audio signal does not come through the
DIGITAL OUT (COAXIAL)/HDMI OUT jack, check
the audio settings (page 22).
• For HDMI connections, try the following:
1Turn the player off and on again. 2Turn the
connected equipment off and on again.
3Disconnect and then reconnect the HDMI
cable.
• For HDMI connections, if the player is
connected to a TV through an AV amplifier
(receiver), try connecting the HDMI cable
directly to the TV. Refer also to the instruction
manual supplied with the AV amplifier
(receiver).
• The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio signals).
• The device connected to the HDMI OUT jack
does not support the audio format of the
player. Check the audio settings (page 22).
• Check the [HDMI Audio Output] settings in
[System Settings] (page 25).
The HD Audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio, DTSHD Master Audio, Dolby Atmos and DTS:X) is
not output by bitstream.
• Set [BD Audio MIX Setting] in [Audio Settings]
to [Off] (page 22).
• Check that the AV amplifier (receiver) is
compatible with each HD Audio format.
The interactive audio is not output.
• Set [BD Audio MIX Setting] in [Audio Settings]
to [On] (page 22).
Message Code 3 [Audio outputs temporarily
muted. Do not adjust the playback volume.
The content being played is protected by
Cinavia and is not authorized for playback on
this device. For more information, see
http://www.cinavia.com. Message Code 3]
appears on the screen when playing a disc.
• The audio track of the video that you are
playing contains a Cinavia code indicating that
it is an unauthorized copy of professionallyproduced content (page 36).
27
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
Disc
The disc does not play.
• The disc is dirty or skewed.
• The disc is upside down. Insert the disc with
the playback side facing down.
• The disc has a format that cannot be played
back by this player (page 30).
• The player cannot play a recorded disc that
is not correctly finalized.
• The region code on the BD/DVD does not
match the player.
USB device
The player does not detect a USB device
connected to the player.
• Make sure that the USB device is securely
connected to the USB jack.
• Check if the USB device or a cable is
damaged.
• Check if the USB device is on.
• If the USB device is connected via a USB
hub, connect the USB device directly to the
player.
Internet streaming
The picture/sound is poor/certain
programmes display a loss of detail,
especially during fast-motion or dark
scenes.
• Picture/sound quality may be improved by
changing the connection speed.
Recommended connection speed is of at
least 2.5 Mbps for standard definition video,
10 Mbps for high definition video and at
least 25 Mbps for Ultra HD video (depending
on the service provider).
Internet streaming via Wi-Fi is unstable
when connected with Bluetooth device
using LDAC.
• Set [Wireless Playback Quality] in [Bluetooth
Settings] to [Connection] (page 23).
There is no options menu during Internet
streaming.
• Options menu is not available during
Internet streaming.
master page=left
Network connection
The player cannot connect to the network.
• Check the network connection (page 13)
and the network settings (page 25).
The PC cannot connect to the Internet after
[Wi-Fi Protected Setup™ (WPS)] is performed.
• The wireless settings of the router may
change automatically if you use the Wi-Fi
Protected Setup function before adjusting the
settings of the router. In this case, change the
wireless settings of your PC accordingly.
You cannot connect the player to the wireless
LAN router.
• Check if the wireless LAN router is on.
• Move the player and the wireless LAN router
closer to each other.
• Move the player away from devices that use a
2.4 GHz frequency band such as a microwave,
Bluetooth or digital cordless device, or turn off
such devices.
The desired wireless router do not appear in
the wireless network list.
• Press RETURN to return to the previous screen,
and try wireless setup again. If the desired
wireless router is still not detected, select
[New connection registration] to perform
[Manual registration].
The message [A new software version is
available. Please go to the “Setup” section of
the menu and select “Software Update” to
perform the update.] appears on the screen
when turning the player on.
• See [Software Update] (page 20) to update the
player to a newer software version.
Bluetooth connection
Bluetooth connection cannot be done/
completed.
• Set [Bluetooth Mode] to [On] (page 23).
• Make sure the Bluetooth device is turned on
and the Bluetooth function is enabled.
• Move the Bluetooth device closer to the
player.
• Connect the player and the Bluetooth device
again. You may need to cancel the connection
with the player using your Bluetooth device
first.
28
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
• Delete pairing information once from the
device list and connected device, before
retrying connection.
• Connection may not be possible if other
Bluetooth devices are present around the
player. In this case, turn off the other
Bluetooth devices.
• The connection registration information has
been erased. Perform the connection
operation again.
Control for HDMI (BRAVIA Sync)
The [Control for HDMI] function does not
work (BRAVIA Sync).
• Check that your TV is connected via the
HDMI OUT 1 jack.
• Check that [Control for HDMI] in [HDMI
Settings] is set to [On] (page 24).
• If you change the HDMI connection, turn the
player off and on again.
• If power failure occurs, set [Control for
HDMI] in [HDMI Settings] to [Off], then set
[Control for HDMI] in [HDMI Settings] to [On]
(page 24).
• Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is
compatible with the [Control for HDMI]
function.
– the connected component’s setting for
the [Control for HDMI] function is
correct.
Additional Information
There is no sound, the sound skips or
fluctuates, or the connection is lost.
• DVD AUDIO cannot be played via Bluetooth
device due to DRM.
• Move the Bluetooth device closer to the
player.
• Make sure the player is not receiving any
interference from a Wi-Fi network, other
Bluetooth device, other 2.4 GHz wireless
device, or microwave oven.
• Check that the Bluetooth connection is
properly made between the player and the
Bluetooth device.
• Connect the player and the Bluetooth
device again.
• Keep the player away from metal objects or
surfaces.
• When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for HDMI]
function, you may be unable to control
the TV from the player.
– if you change the HDMI connection,
disconnect and reconnect the AC
power cord, or a power failure occurs,
try the following: 1Switch the input
selector of the AV amplifier (receiver)
so that the picture from the player
appears on the TV screen. 2Set
[Control for HDMI] in [HDMI Settings] to
[Off], then set [Control for HDMI] in
[HDMI Settings] to [On] (page 24). Refer
to the instruction manual supplied with
the AV amplifier (receiver).
The System Power-Off function does not
work (BRAVIA Sync).
• Check that [Control for HDMI] and [Linked to
TV-off] in [HDMI Settings] are set to [On] and
[Valid] (page 24).
Others
Playback does not start from the beginning
of content.
• Press OPTIONS, and select [Play from
beginning].
Playback does not start from the resume
point where you last stopped playing.
• The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
Message Code 1 [Playback stopped. The
content being played is protected by
Cinavia and is not authorized for playback
on this device. For more information, see
http://www.cinavia.com. Message Code 1]
appears on the screen when playing a disc.
• The audio track of the video that you are
playing contains a Cinavia code indicating it
was intended for presentation using
professional equipment only and is not
authorized for playback by consumers
(page 36).
29
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
The disc tray does not open and you cannot
remove the disc even after you press
Z OPEN/CLOSE.
• While the player is turned on, press x STOP,
HOME, and then TOP MENU button on the
remote to unlock the tray and disable the
Child Lock (page 10).
• Try the following: 1Turn the player off, and
disconnect the AC power cord. 2Reconnect
the AC power cord while pressing down
Z OPEN/CLOSE on the player. 3Keep
pressing down Z OPEN/CLOSE on the
player until the tray opens. 4Remove the
disc.
master page=left
Discs that cannot be played
• BDs with cartridge
• BDXLs
• DVD-RAMs
• HD DVDs
• PHOTO CDs
• Data part of CD-Extras
• Super VCDs
• Audio material side on DualDiscs
• A disc recorded in a color system other than
NTSC, such as PAL (this player conforms to
the NTSC color system).
Note on Discs
The message [[EJECT] Key is currently
unavailable.] appears on the screen after
Z OPEN/CLOSE is pressed.
• Contact your nearest Sony dealer or local
authorized Sony service facility.
This product is designed to playback discs
that conform to the Compact Disc (CD)
standard. DualDiscs and some of the music
discs encoded with copyright protection
technologies do not conform to the Compact
Disc (CD) standard, therefore, these discs
may not be playable by this product.
The player does not respond to any button.
• Moisture has condensed inside the player
(page 3).
Note on playback operations of Ultra HD
Blu-ray/BD/DVD
Playable discs
Some playback operations of Ultra HD Bluray/BD/DVD may be intentionally set by
software producers. Since this player plays
Ultra HD Blu-ray/BD/DVD according to the
disc contents the software producers
designed, some playback features may not
be available.
Blu-ray
Disc*1
Ultra HD Blu-ray, BD-ROM,
BD-R*2/BD-RE*2
DVD*3
Note about double-layer Ultra HD Blu-ray/BD/
DVD and triple-layer Ultra HD Blu-ray
DVD-ROM, DVD-R/
DVD-RW, DVD+R/DVD+RW,
DVD AUDIO*4
The playback pictures and sound may be
momentarily interrupted when the layers
switch.
CD*3
CD-DA (Music CD),
CD-ROM, CD-R/CD-RW,
Super Audio CD
Region code (BD/DVD VIDEO only)
*1
*2
*3
*4
Since the Blu-ray Disc specifications are new
and evolving, some discs may not be playable
depending on the disc type and the version.
The audio output differs depending on the
source, connected output jack, and selected
audio settings.
BD-RE: Ver.2.1, BD-R: Ver.1.1, 1.2, 1.3 including
organic pigment type BD-R (LTH type). The
BD-Rs recorded on a PC cannot be played if
postscripts are recordable.
A CD or DVD disc will not play if it has not been
correctly finalized. For more information, refer
to the instruction manual supplied with the
recording device.
Some DVD AUDIO discs have hidden group
and need password entry. Refer to the disc for
the password.
Your player has a region code printed on the
rear of the unit and will only play BD/DVD
VIDEO labeled with identical region codes or
ALL .
30
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
Playable types of files
Video
Codec
MPEG-1 Video*1
Container
Extension
With Audio
PS
.mpg, .mpeg
Dolby Digital, DTS, LPCM, MPEG
MKV
.mkv
Dolby Digital, LPCM, AAC, MP3, Vorbis
Dolby Digital, DTS, LPCM, MPEG
*3
MPEG-2 Video*2
Xvid
PS
.mpg, .mpeg
TS*4
.m2ts, .mts
Dolby Digital, DTS, LPCM, MPEG, AAC
MKV*1
.mkv
Dolby Digital, LPCM, AAC, MP3, Vorbis
.avi
Dolby Digital, LPCM, WMA9, MP3
MKV
.mkv
Dolby Digital, LPCM, AAC, MP3, Vorbis
MKV*1
.mkv
Dolby Digital, LPCM, AAC, MP3, Vorbis
.mp4, .m4v
AAC
.m2ts, .mts
Dolby Digital, DTS, LPCM, MPEG, AAC
MP4
MPEG4/AVC/
H.264*5
VC1*1
WMV9*1*7
Motion JPEG*6
HEVC/H.265
VP6
VP8/VP9
*1
TS*1
Quick Time
*6
.mov
Dolby Digital, LPCM, AAC, MP3
FLV*6
.flv, .f4v
LPCM, AAC, MP3
3gpp/3gpp2*6
.3gp, .3g2,
.3gpp, .3gp2
AAC
TS
.m2ts, .mts
Dolby Digital, DTS, LPCM, MPEG, AAC
MKV
.mkv
Dolby Digital, LPCM, AAC, MP3, Vorbis
ASF
.wmv, .asf
WMA9, WMA 10 Pro
MKV
.mkv
Dolby Digital, LPCM, AAC, MP3, Vorbis
Quick Time
.mov
Dolby Digital, LPCM, AAC, MP3
AVI
.avi
Dolby Digital, LPCM, AAC, MP3
MKV
.mkv
Dolby Digital, LPCM, AAC, MP3, Vorbis
MP4
.mp4, .m4v
AAC
TS
.m2ts, .mts
Dolby Digital, DTS, LPCM, MPEG, AAC
FLV
.flv
MP3
Webm
.webm
Vorbis
MKV
.mkv
Dolby Digital, LPCM, AAC, MP3, Vorbis
Additional Information
AVI
Format
AVCHD (Ver.2.0)*1*8*9*10
31
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
*11
Music
The player can play “.mka” files.
This file cannot be played on a Home
Network server.
The player does not play coded file such as
Lossless.
The player does not play DST encoded files.
The player does not play animated PNG or
animated GIF files.
For MPO files other than 3D, the key image or
the first image is displayed.
The player does not support 16bit BMP files.
Codec
Extension
MP3 (MPEG-1 Audio Layer
III)*11
.mp3
AAC/HE-AAC*1*11
.m4a, .aac*6
WMA9 Standard*1
.wma
WMA 10 Pro*12
.wma
LPCM*11
.wav
*16
FLAC*1
.flac, .fla
b
Dolby Digital*6*11
.ac3
DSF*1
.dsf
DSDIFF*1*13
.dff
AIFF*1
.aiff, .aif
ALAC*1
.m4a
Vorbis
.ogg
Monkey’s Audio
.ape
• Some files may not play depending on the file
format, file encoding, recording condition, or
Home Network server condition.
• Some files edited on a PC may not play.
• Some files may not be able to perform fast
forward or fast reverse function.
• The player does not play coded files such as
DRM.
• The player can recognise the following files or
folders in BDs, DVDs, CDs and USB devices:
– up to folders in the 9th layer, including the
root folder.
– up to 500 files/folders in a single layer.
• The player can recognise the following files or
folders stored in the Home Network server:
– up to folders in the 19th layer.
– up to 999 files/folders in a single layer.
• The player can support frame rate:
– up to 60 fps for AVCHD (MPEG4/AVC) only.
– up to 30 fps for other video codecs.
• The player can support video bit rate up to
40 Mbps.
• Some USB devices may not work with this
player.
• The player can recognise Mass Storage Class
(MSC) devices (such as flash memory or an
HDD), Still Image Capture Device (SICD) class
devices and 101 keyboard.
• To avoid data corruption or damage to the USB
memory or devices, turn off the player when
connecting or removing the USB memory or
devices.
• The player may not play high bit rate video and
audio files on DATA CDs smoothly. It is
recommended to play such files using DATA
DVDs or DATA BDs.
Photo
Format
Extension
JPEG
.jpeg, .jpg,
.jpe
PNG
.png*14
GIF
.gif*14
MPO
.mpo*6*15
BMP
.bmp*6*16
WEBP
.webp
*1
*2
*3
*4
*5
*6
*7
*8
*9
*10
The player may not play this file format on a
Home Network server.
The player can only play standard definition
video on a Home Network server.
The player does not play DTS format files on
a Home Network server.
The player can only play Dolby Digital format
files on a Home Network server.
The player can support AVC up to Level 4.1.
The player does not play this file format on a
Home Network server.
The player can support WMV9 up to Advance
Profile.
The player can support frame rate up to
60 fps.
The player plays AVCHD format files that are
recorded on a digital video camera, etc. The
AVCHD format disc will not play if it has not
been correctly finalized.
The player can play AVCHD 3D format.
*12
*13
*14
*15
32
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
master page=right
Specifications
Specifications and design are subject to change without notice.
System
Laser
Semiconductor laser
Inputs and outputs
Jack name
Jack type/Output level/Load impedance
DIGITAL OUT (COAXIAL)
Phono jack /0.5 Vp-p/75 ohms
HDMI 19-pin standard connector
HDMI OUT 1*/2
* Only HDMI OUT 1 supports video output.
LAN (100)
Additional Information
USB
100BASE-TX Terminal
USB jack Type A (For connecting a USB memory, memory
card reader, digital still camera, and digital video camera)*
* Do not use for power charging purposes.
Wireless
Wireless LAN standard
Protocol IEEE802.11a/b/g/n
Frequency range
2.4 GHz, 5 GHz band
Modulation
DSSS and OFDM
Bluetooth Version
Bluetooth Specification v4.1
Bluetooth
Communication system
Bluetooth Specification v4.1
Output
Bluetooth Specification Power Class 1
Maximum communication
range
Line of sight approx. 30 m
Frequency band
2.4 GHz
Modulation method
FHSS
Compatible Bluetooth Profiles
A2DP v1.2, AVRCP v1.3
Supported Codecs
SBC, AAC, LDAC
Transmission range (A2DP)
• 20 Hz - 40,000 Hz (LDAC in sampling 96 kHz and transmit
by 990 kbps)
• 20 Hz - 20,000 Hz (in sampling 44.1 kHz)
33
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
master page=left
General
Power requirements
Rating: Input 120 V AC, 60 Hz
Power consumption
15 W
Dimensions (approx.)
430 mm × 265 mm × 50 mm (17 in. × 10 1/2 in. × 2 in.)
(width × depth × height) incl. projecting parts
Mass (approx.)
3.8 kg (8 lb 2/5 oz)
Operating temperature
5 ºC to 35 ºC (41 ºF to 95 ºF)
Operating humidity
25 % to 80 %
34
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
Copyrights and Trademarks
• Java is a trademark of Oracle and/or its
affiliates.
• Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the
double-D symbol are trademarks of Dolby
Laboratories.
• The terms HDMI®, HDMI High-Definition
Multimedia Interface, Premium High Speed
HDMI Cable, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing, LLC in the United States and other
countries.
• Blu-ray Disc™, Blu-ray™, BD-LIVE™,
BONUSVIEW™ and Ultra HD Blu-ray™ word
marks and the logos are trademarks of the
Blu-ray Disc Association.
• Blu-ray 3D™ and Blu-ray 3D™ logo are
trademarks of the Blu-ray Disc Association.
• “DVD Logo” is a trademark of DVD Format/
Logo Licensing Corporation.
• “DVD+RW”, “DVD-RW”, “DVD+R”, “DVD-R”,
“DVD VIDEO”, “DVD AUDIO”, “Super Audio CD”
and “CD” logos are trademarks.
• “BRAVIA” is a trademark of Sony Corporation.
• MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
• This product incorporates proprietary
technology under license from Verance
Corporation and is protected by U.S. Patent
7,369,677 and other U.S. and worldwide
patents issued and pending as well as
copyright and trade secret protection for
certain aspects of such technology. Cinavia is a
trademark of Verance Corporation. Copyright
2004-2010 Verance Corporation. All rights
reserved by Verance. Reverse engineering or
disassembly is prohibited.
• Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or other
countries.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use
or distribution of such technology outside of
this product is prohibited without a license
from Microsoft or an authorized Microsoft
subsidiary.
Content owners use Microsoft PlayReady™
content access technology to protect their
intellectual property, including copyrighted
content. This device uses PlayReady
technology to access PlayReady-protected
content and/or WMDRM-protected content. If
the device fails to properly enforce restrictions
on content usage, content owners may require
Microsoft to revoke the device’s ability to
consume PlayReady-protected content.
Revocation should not affect unprotected
content or content protected by other content
access technologies. Content owners may
require you to upgrade PlayReady to access
their content. If you decline an upgrade, you
will not be able to access content that requires
the upgrade.
• Gracenote, the Gracenote logo and logotype,
the “Powered by Gracenote” logo, and
Gracenote MusicID are either registered
trademarks or trademarks of Gracenote, Inc. in
the United States and/or other countries.
Additional Information
• For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS
Licensing Limited. DTS, DTS-HD, the Symbol, &
DTS and the Symbol together are registered
trademarks, and DTS-HD Master Audio is a
trademark of DTS, Inc. © DTS, Inc. All Rights
Reserved.
master page=right
• Wi-Fi®, Wi-Fi Protected Access®, Wi-Fi
Alliance® and Miracast® are registered
trademarks of Wi-Fi Alliance.
• Wi-Fi CERTIFIED™, WPA™, WPA2™ , Wi-Fi
Protected Setup™ and Wi-Fi CERTIFIED
Miracast™ are trademarks of Wi-Fi Alliance.
• The Wi-Fi CERTIFIED Logo is a certification
mark of Wi-Fi Alliance.
• The Wi-Fi Protected Setup Identifier Mark is a
certification mark of the Wi-Fi Alliance.
35
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
master page=left
• The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Sony
Corporation is under license. Other trademarks
and trade names are those of their respective
owners.
• LDAC™ and LDAC logo are trademarks of Sony
Corporation.
• “DSEE HX” is a trademark of Sony Corporation.
• SongPal Link and SongPal Link logo are
trademarks of Sony Corporation.
Cinavia Notice
• Google Play™ and the Google Play logo are
trademarks of Google Inc.
• Apple and the Apple logo, are trademarks of
Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple
Inc.
• This product incorporates Spotify software which
is subject to 3rd party licenses found here*:
https://developer.spotify.com/esdk-third-partylicenses/
Spotify and Spotify logos are trademarks of the
Spotify Group.*
* This function may not be available in some
countries/regions.
• Opera® Devices SDK. Copyright 1995-2016 Opera
TV AS. All rights reserved.
Gracenote® End User License Agreement
• All other trademarks are trademarks of their
respective owners.
• Other system and product names are generally
trademarks or registered trademarks of the
manufacturers. ™ and ® marks are not indicated
in this document.
This product uses Cinavia technology to limit the
use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback
or copying will be interrupted.
More information about Cinavia technology is
provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com. To
request additional information about Cinavia by
mail, send a postcard with your mailing address to:
Cinavia Consumer Information Center, P.O. Box
86851, San Diego, CA, 92138, USA.
This application or device contains software
from Gracenote, Inc. of Emeryville, California
(“Gracenote”). The software from Gracenote (the
“Gracenote Software”) enables this application
to perform disc and/or file identification and
obtain music-related information, including
name, artist, track, and title information
(“Gracenote Data”) from online servers or
embedded databases (collectively, “Gracenote
Servers”) and to perform other functions. You
may use Gracenote Data only by means of the
intended End-User functions of this application
or device.
You agree that you will use Gracenote Data, the
Gracenote Software, and Gracenote Servers for
your own personal non-commercial use only.
You agree not to assign, copy, transfer or
transmit the Gracenote Software or any
Gracenote Data to any third party. YOU AGREE
NOT TO USE OR EXPLOIT GRACENOTE DATA, THE
GRACENOTE SOFTWARE, OR GRACENOTE
SERVERS, EXCEPT AS EXPRESSLY PERMITTED
HEREIN.
Copy Protection
Please be advised of the advanced content
protection systems used in Ultra HD Blu-ray™,
Blu-ray Disc™ and DVD media. These systems,
called AACS (Advanced Access Content System)
and CSS (Content Scramble System), may contain
some restrictions on playback, analog output, and
other similar features. The operation of this
product and the restrictions placed may vary
depending on the date of purchase, as the
governing board of the AACS may adopt or change
its restriction rules after the time of purchase.
You agree that your non-exclusive license to use
the Gracenote Data, the Gracenote Software,
and Gracenote Servers will terminate if you
violate these restrictions. If your license
terminates, you agree to cease any and all use of
the Gracenote Data, the Gracenote Software,
and Gracenote Servers. Gracenote reserves all
rights in Gracenote Data, the Gracenote
Software, and the Gracenote Servers, including
all ownership rights. Under no circumstances
will Gracenote become liable for any payment to
you for any information that you provide. You
agree that Gracenote, Inc. may enforce its rights
under this Agreement against you directly in its
own name.
36
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
master page=right
The Gracenote service uses a unique identifier to
track queries for statistical purposes. The
purpose of a randomly assigned numeric
identifier is to allow the Gracenote service to
count queries without knowing anything about
who you are. For more information, see the web
page for the Gracenote Privacy Policy for the
Gracenote service.
Software License Information
The Gracenote Software and each item of
Gracenote Data are licensed to you “AS IS.”
Gracenote makes no representations or
warranties, express or implied, regarding the
accuracy of any Gracenote Data from in the
Gracenote Servers. Gracenote reserves the right
to delete data from the Gracenote Servers or to
change data categories for any cause that
Gracenote deems sufficient. No warranty is
made that the Gracenote Software or Gracenote
Servers are error-free or that functioning of
Gracenote Software or Gracenote Servers will be
uninterrupted. Gracenote is not obligated to
provide you with new enhanced or additional
data types or categories that Gracenote may
provide in the future and is free to discontinue
its services at any time.
This product contains software that is subject to
the GNU General Public License (“GPL”) or GNU
Lesser General Public License (“LGPL”). These
licenses establish that customers have the right
to acquire, modify, and redistribute the source
code of said software in accordance with the
terms of the GPL or the LGPL.
The source code for the software used in this
product is subject to the GPL and LGPL, and is
available on the Web. To download, please visit
the following website:
http://oss.sony.net/Products/Linux
Please note that Sony cannot respond to any
inquiries regarding the content of this source
code.
GRACENOTE DISCLAIMS ALL WARRANTIES
EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, TITLE, AND NON-INFRINGEMENT.
GRACENOTE DOES NOT WARRANT THE RESULTS
THAT WILL BE OBTAINED BY YOUR USE OF THE
GRACENOTE SOFTWARE OR ANY GRACENOTE
SERVER. IN NO CASE WILL GRACENOTE BE LIABLE
FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES OR FOR ANY LOST PROFITS OR LOST
REVENUES.
Services offered by third parties may be
changed, suspended, or terminated without
prior notice. Sony does not bear any
responsibility in these sorts of situations.
For EULA (End User License Agreement), please
refer to [License agreement] in the option menu
on each network service icon.
For details of the other software licenses, please
select [Setup] and refer to [Software License
Information] in [System Settings].
Additional Information
Disclaimer regarding services offered by third
parties
© 2000 – present. Gracenote, Inc. All Rights
Reserved.
37
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
About wireless LAN security
Since communication via the wireless LAN
function is established by radio waves, the
wireless signal may be susceptible to
interception. To protect wireless
communication, this player supports various
security functions. Be sure to correctly
configure the security settings in accordance
with your network environment.
No Security
Although you can easily make settings,
anyone can intercept wireless
communication or intrude into your wireless
network, even without any sophisticated
tools. Keep in mind that there is a risk of
unauthorized access or interception of data.
WEP
WEP applies security to communications to
prevent outsiders from intercepting
communications or intruding into your
wireless network. WEP is a legacy security
technology that enables older devices, which
do not support TKIP/AES, to be connected.
WPA-PSK (TKIP), WPA2-PSK (TKIP)
TKIP is a security technology developed to
correct the deficiencies of WEP. TKIP assures
a higher security level than WEP.
WPA-PSK (AES), WPA2-PSK (AES)
AES is a security technology that uses an
advanced security method that is distinct
from WEP and TKIP.
AES assures a higher security level than WEP
or TKIP.
master page=left
Notes About the Discs
• To keep the disc clean,
handle the disc by its
edge. Do not touch the
surface.
Dust, fingerprints, or
scratches on the disc may
cause it to malfunction.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave
it in a car parked in direct sunlight as the
temperature may rise considerably inside
the car.
• After playing, store the disc in its case.
• Clean the disc with a
cleaning cloth. Wipe the disc
from the center out.
• Do not use solvents such as
benzine, thinner,
commercially available disc/
lens cleaners, or anti-static
spray intended for vinyl LPs.
• If you have printed the disc’s label, dry the
label before playing.
• Do not use the following discs.
– A lens cleaning disc.
– A disc that has a non-standard shape
(e.g., card, heart).
– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker
adhesive on it.
• Do not resurface the playing side of a disc to
remove surface scratches.
38
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
Language code list
For details, see [BD/DVD Viewing Settings]
(page 23).
The language spellings conform to the ISO
639: 1988 (E/F) standard.
Language
1027
1032
1044
1051
1053
1059
1061
1067
1079
1097
1105
1130
Afar
Afrikaans
Arabic
Aymara
Bashkir
Bulgarian
Bislama
Tibetan
Catalan
Czech
Danish
Bhutani;
Dzongkha
English
Spanish
Basque
Finnish
Faroese
Frisian
Scots Gaelic
Guarani
Hausa
Croatian
Armenian
Interlingue
Indonesian
Italian
Japanese
Javanese
Kazakh
1144
1149
1151
1165
1171
1181
1186
1196
1209
1226
1233
1239
1248
1254
1261
1283
1297
1299
1028
1039
1045
1052
1057
1060
1066
1070
1093
1103
1109
1142
Abkhazian
Amharic
Assamese
Azerbaijani
Byelorussian
Bihari
Bengali
Breton
Corsican
Welsh
German
Greek
1145
1150
1157
1166
1174
1183
1194
1203
1217
1229
1235
1245
1253
1257
1269
1287
1298
Esperanto
Estonian
Persian
Fiji
French
Irish
Galician
Gujarati
Hindi
Hungarian
Interlingua
Inupiak
Icelandic
Hebrew
Yiddish
Georgian
Greenlandic;
Kalaallisut
Kannada
1301
1307
1313
1327
1334
1347
1350
1353
1357
Cambodian;
Khmer
Korean
Kurdish
Latin
Laothian; Lao
Latvian
Maori
Malayalam
Moldavian
Malay
1300
1305
1311
1326
1332
1345
1349
1352
1356
1358
1363
1369
1379
1403
Burmese
Nepali
Norwegian
Oromo
1365
1376
1393
1408
Language
1417
Punjabi;
1428
Panjabi
Pashto; Pushto 1436
Quechua
1481
1435
1463
1482
1489
1495
1501
1503
1506
1508
1511
1513
1515
1517
1525
1528
1531
1534
1538
1540
1557
1572
1587
1632
1684
1703
Kirundi; Rundi
Russian
Sanskrit
Sangho; Sango
Singhalese;
Sinhalese
Slovenian
Shona
Albanian
Siswati; Swati
Sundanese
Swahili
Telugu
Thai
Turkmen
Setswana;
Tswana
Turkish
Tatar
Ukrainian
Uzbek
Volapük
Xhosa
Chinese
Not specified
1483
1491
1498
1502
1505
1507
1509
1512
1514
1516
1521
1527
1529
1532
1535
1539
1543
1564
1581
1613
1665
1697
Polish
Portuguese
RhaetoRomance
Romanian
Kinyarwanda
Sindhi
Serbo-Croatian
Slovak
Samoan
Somali
Serbian
Sesotho; Sotho
southern
Swedish
Tamil
Tajik
Tigrinya
Tagalog
Tonga; Tonga
islands
Tsonga
Twi
Urdu
Vietnamese
Wolof
Yoruba
Zulu
Additional Information
Code
Code
Kashmiri
Kirghiz
Lingala
Lithuanian
Malagasy
Macedonian
Mongolian
Marathi
Malese;
Maltese
Nauru
Dutch
Occitan
Oriya
39
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
master page=left
Parental control/area code
For details, see [Parental Control Area Code]
(page 24).
Code
Area
2044
2046
2070
2092
2115
2174
2200
2248
2239
2276
2333
2362
2390
2427
2428
2489
2149
2086
2528
Argentina
Austria
Brazil
China
Denmark
France
Greece
India
Ireland
Japan
Luxembourg
Mexico
New Zealand
Pakistan
Poland
Russia
Spain
Switzerland
Thailand
2586
Vietnam
2047
2057
2090
2093
2165
2109
2219
2238
2254
2304
2363
2376
2379
2424
2436
2501
2499
2543
2184
Australia
Belgium
Chile
Colombia
Finland
Germany
Hong Kong
Indonesia
Italy
Korea
Malaysia
Netherlands
Norway
Philippines
Portugal
Singapore
Sweden
Taiwan
United
Kingdom
40
UBP-X800 / UBP-UX80
4-687-309-11(1)
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070BC
O.fm
master page=left
Model Name: UBP-X800 / UBP-UX80
Record the serial number (S/N) in the space provided below. Provide this number to your Sony
dealer to get quicker action whenever you call them regarding this product.
S/N _____________________________
4-687-309-11(1)
http://www.sony.net/
© 2017 Sony Corporation
Printed in Malaysia
UBP-X800 / UBP-UX80
4-687-309-11(1)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising