COMPACT Splicing Connectors for All Conductor Types 222 Series

COMPACT Splicing Connectors for All Conductor Types 222 Series
COMPACT Splicing Connectors for All Conductor Types
222 Series
0.08 … 2.5 mm² “s+st” AWG 28 … 12 “s+f-st”
0.08 … 4 mm² “f-st”
AWG 28 … 12 “f-st”
400 V/4 kV/2 1
600 V, 20 Ar
IN 32 A
L 9 … 10 mm / 0.37 in. 2
12
503
0.08 … 2.5 mm² “s+st” AWG 28 … 12 “s+f-st” 0.08 … 4 mm² “f-st”
AWG 28 … 12 “f-st”
400 V/4 kV/2 1
600 V, 20 Ar
IN 32 A
L 9 … 10 mm / 0.37 in. 2
1 in grounded power lines
400 V = rated voltage
4 kV = rated surge voltage
2 = pollution degree
(also see Section 14)
2 Strip length, see packaging or instructions.
Color
Pack.
Unit
Item No.
12,4
Pack.
Unit
Item No.
COMPACT splicing connector,
3-conductor connector,
with levers,
max. continuous service temperature 85°C
gray
222-413
500 (10x50)
500 (10x50)
14,5
14,5
COMPACT splicing connector,
2-conductor connector,
with levers,
max. continuous service temperature 85°C
gray
222-412
Color
17
20,5
20,5
Dimensions in mm
Dimensions in mm
COMPACT splicing connectors
Tool-free connection of up to 5 stripped fine-stranded conductors from 0.08 mm² … 4 mm²/AWG 28 … 12, solid
or stranded conductors up to 2.5 mm²/AWG 14.
This is how it works:
Open the clamping unit using the integrated orange lever
actuator so that the lever engages and keeps the clamp in
its opened position. The conductor can now be inserted,
then the lever can be returned to its rest position, flush with
the connector housing.
Pack.
Unit
Color
Item No.
COMPACT splicing connector,
5-conductor connector,
with levers,
max. continuous service temperature 85°C
gray
222-415
14,5
26,6
Dimensions in mm
Certification organizations can be found in the overview on page 622.
20,5
400 (10x40)
The safety:
The specially designed rest position of the lever reliably
prevents accidental unclamping of a connected conductor.
Application safety, for any type of conductor (solid, stranded, fine-stranded), is confirmed by approvals like ENEC
and UL.
ENEC is the European mark for electrical products that
demonstrates compliance with European safety standards.
The ENEC mark is subjected to the same EN standards as
the VDE mark.
While the VDE mark is only permitted in Germany, the
ENEC mark is accepted in more than 20 European countries.
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising