user manual - MCM Electronics

R
Contents:
INTRODUCTION
Dear customer
Thank you for purchasing this Stellar Labs product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual for
future reference.
USER MANUAL
1.HDMI splitter
2.5V Power Adaptor
3.Manual
Operating and Connecting:
1 piece
1 piece
1 piece
1.Connect one HDMI cable from the HDMI source to the unit via the HDMI input.
2.Connect one cable from each display to the unit via the HDMI outputs.
3.Connect the 5V power supply to the unit via the power terminal.
Unit Layout
SPECIFICATIONS:
Our selection of HDMI Converter, switchers, extenders, matrixes and splitters are designed to make your A/V
device use more convenient, comfortable, productive and cost-efficient.
HDMI Splitter 1x2
HDMI resolution …………….…V24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support video color format ……………………………….24bit/deep color 30bit,36bit
Support audio format………….DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth…………………………………………………………………..225MHz
Max baud rate……………….…….……….……………………………..……..6.75Gbps
Input/Output TMDS signal ……………………………..………..… 0.5~1.5Volts p-p(TTL)
Input/Output DDC signal …………………………………..…………… 5Volts p-p (TTL)
Input cable distance.……….……………………….≤10m AWG26 HDMI standard cable
Output cable distance………………………….…...≤10m AWG26 HDMI standard cable
Max working current…………………………………………………...……….....150mA
Power adapter format..Input: …………AC (50HZ, 60HZ) :100V-240V; Output: DC5V/1A
Operating Temperature range……………….………………………..…… -15 to +55℃
Operating Humidity range……………….….……..…….5 to 90%RH (No Condensation)
Dimension (L x W x H)………………………………………………………4.3” x 2” x 0.8”
Weight…..…………………………………………………….…..……………………5 oz
This unit is a 2 Port HDMI Splitter that has the ability to send a 4k signal from one source into two separate
monitors.
Model #: 33-12785
Our devices offer solutions for noise, space, security concerns, data center control, information distribution,
conference room presentations, schools, and corporate training environments.
Figure 1
FEATURES
●
●
●
●
●
●
●
●
●
●
●
Notes:
Power:
5V DC-DC Power interface
HDMI Input:
HDMI input interface
One HDMI input signal split into two HDMI outputs
Supports 3D
Support 4K x2K
Supports CEC
Supports deep color 30bit, 36bit
Supports Blue-Ray 24/50/60fs/HD-DVD/xvYCC
Digital audio formats, DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Supports signal retiming
Supports HDMI cables up to 30’
No loss of quality
Installs in minutes
Warranty
Please use this device as the instructions have described to improve the longevity and safety of the unit.
1.The unit should be placed in a location away from damp, high-temperature, dusty, erosive, and
oxidative conditions.
2.Please hold the power adapter head and do not pull the power cord when disconnecting from the
socket.
3.Please turn the power off when the unit is not being used for long time.
4.Please use the original factory power adapter.
This device is warranted against manufactures defects for a period of one year from the date of purchase
from the dealer. This warranty extends solely to the repair or replacement of this product and does not
cover additional costs, including but not limited to installation or removal of the product or any
incidental or consequential damages. Nor does it cover damage due to improper use, storage or
application of this device. Should a service issue arise within the one year period, please contact the
dealer in which this device was purchased. It will be the sole decision of Stellar Labs to repair or replace
any device found to be defective during this period.
Troubleshooting
Issue
Cause and Ways to deal with
1.
No Power
Make sure the power plug is inserted securely into the
unit.
2.
Check the power source to make sure it is connected to
an outlet.
1. Make sure the monitor is on and connected to the unit.
2. Make sure the source is on and connected to the unit.
No Picture
3. Check all connections to make sure they are secure.
4.
Connect the source to the monitor to see if the issue with
your other components.
5. Inspect your HDMI cable for damage.
Figure 2
HDMI Output:
1. Connect the source to the monitor to see if the issue with
HDMI output interfaces
Obscure Picture
your other components.
2. Inspect your HDMI cable for damage.
Mcmelectronics.com
Mcmelectronics.com
Mcmelectronics.com
Mcmelectronics.com
Mcmelectronics.com
Mcmelectronics.com

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project