PDF Operating Instruction TE 2-A22

PDF Operating Instruction TE 2-A22
TE 2-A22
Original operating instructions
Original brugsanvisning
Originalbruksanvisning
Original bruksanvisning
Alkuperäiset ohjeet
Оригинальное руководство по эксплуатации
Оригинално Ръководство за експлоатация
Manual de utilizare original
Orijinal kullanım kılavuzu
‫ﺩﻟﻴﻞ ﺍﻻﺳﺘﻌﻤﺎﻝ ﺍﻷﺻﻠﻲ‬
Oriģinālā lietošanas instrukcija
Originali naudojimo instrukcija
Algupärane kasutusjuhend
Түпнұсқа пайдалану бойынша нұсқаулық
オリジナル取扱説明書
오리지널 사용설명서
原始操作說明
原版操作说明
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
en
da
sv
no
fi
ru
bg
ro
tr
ar
lv
lt
et
kk
ja
ko
zh
cn
1
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
2
3
4
5
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
6
7
8
9
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
TE 2-A22
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Dansk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
Norsk
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
Русский . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
51
Română . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
75
‫ ﻋﺮﺑﻲ‬. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
96
Svenska . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Suomi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Български . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Türkçe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21
41
63
86
Latviešu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Lietuvių . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Eesti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Қазақ
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
日本語 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
한국어 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
繁體中文 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
中文 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
1 Information about the documentation
1.1 Conventions
1.1.1 Warning signs
The following warning signs are used:
General warning
1.1.2 Symbols
The following symbols are used:
Read the operating instructions before use.
Wear protective gloves
Instructions for use and other useful information
Drilling without hammering
Drilling with hammering action (hammer drilling)
Forward / reverse
Rated speed under no load
Direct current (DC)
Revolutions per minute
1.1.3 Typographic emphasis
The following typographical features are used to emphasize important passages in the technical documentation about the product:
1
These numbers refer to the corresponding illustrations.
1.2 Operating instructions
▶
▶
▶
It is essential that the operating instructions are read before the tool is operated for the first time.
Always keep these operating instructions together with the tool.
Ensure that the operating instructions are with the tool when it is given to other persons.
Changes and errors excepted.
1.3 Product information
The type designation and serial number are printed on the type identification plate.
▶ Make a note of this data in the following table and always refer to it when making an enquiry to your Hilti
representative or Hilti Service Center.
Product information
Type:
Generation:
Serial no.:
02
2 Safety
2.1 Warnings
The purpose of warnings
Warnings alert persons to hazards that occur when handling or using the product.
1
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
Description of the key words used
DANGER
Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that could lead to slight personal injury or damage
to the equipment or other property.
2.2 Safety instructions
The safety rules given in the following section contain all general safety rules for electric tools which, in
accordance with the applicable standards, require to be listed in the operating instructions. Accordingly,
some of the rules listed may not be relevant to this electric tool.
2.2.1 General power tool safety warnings
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
▶ Keep work area clean and well lit. Cluttered or dark areas invite accidents.
▶ Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
▶ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
Electrical safety
▶ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
▶ Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
▶ Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
▶ Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
▶ When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
▶ If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
Personal safety
▶ Stay alert, watch what you are doing and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in serious personal injury.
▶ Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
▶ Prevent unintentional starting. Ensure the switch is in the off‐position before connecting to power
source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on
the switch or energising power tools that have the switch on invites accidents.
▶ Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
▶ Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
▶ Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
2
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
▶
If devices are provided for the connection of dust extraction and collection facilities, ensure these
are connected and properly used. Use of dust collection can reduce dust-related hazards.
Power tool use and care
▶ Do not force the power tool. Use the correct power tool for your application. The correct power tool will
do the job better and safer at the rate for which it was designed.
▶ Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
▶ Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
▶ Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
▶ Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools.
▶ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
▶ Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
Battery tool use and care
▶ Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack.
▶ Use power tools only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
▶ When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a fire.
▶ Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
Service
▶ Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
2.2.2 Hammer safety warnings
▶
▶
▶
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handles, if supplied with the tool. Loss of control can cause personal injury.
Hold power tool by insulated gripping surfaces, when performing an operation where the cutting
accessory may contact hidden wiring.. Cutting accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the operator an electric shock.
2.2.3 Additional safety instructions
Personal safety
▶ Modification of the tool is not permitted.
▶ Always hold the power tool with both hands on the grips provided. Keep the grips dry, clean and
free from oil and grease.
▶ Improve the blood circulation in your fingers by relaxing your hands and exercising your fingers
during breaks between working.
▶ Avoid touching rotating parts. Switch the power tool on only after bringing it into position at the
workpiece. Touching rotating parts, especially rotating drill bits or other accessories, may lead to injury.
▶ Do not direct the lamp either at yourself or at anyone else. Do not, under any circumstances, look
into the lamp. There is a risk of dazzling yourself and causing damage to the retina of the eye.
▶ Activate the safety lock (forward/reverse switch in the middle position) before making adjustments
to the tool, fitting drilling tools, a side handle or a depth gauge and when storing and transporting
the tool.
▶ The appliance is not intended for use by debilitated persons who have received no special training.
Keep the appliance out of reach of children.
3
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
▶
▶
▶
▶
▶
▶
Dust from materials, such as paint containing lead, some wood species, concrete/masonry/stone
containing silica, and minerals as well as metal, may be harmful. Contact with or inhalation of the dust
may cause allergic reactions and/or respiratory or other diseases to the operator or bystanders. Certain
kinds of dust, such as oak and beech dust, are classified as carcinogenic, especially in conjunction with
additives for wood conditioning (chromate, wood preservative). Material containing asbestos may be
handled only by specialists. Use a dust removal system whenever possible. To achieve a high level
of dust collection, use a suitable vacuum cleaner. When indicated, wear a respirator appropriate
for the type of dust generated. Ensure that the workplace is well ventilated. Observe national
regulations applicable to the materials you intend to work with.
If the work involves breaking right through, take the appropriate safety measures on the opposite
side. Parts breaking away could fall out and / or fall down and injure other persons.
Before beginning work, check the working area (e.g. using a metal detector) to ensure that no
concealed electric cables or gas and water pipes are present. External metal parts of the power tool
may become live, for example, if an electric cable is damaged accidentally. This presents a serious risk
of electric shock.
In accordance with the applications for which it is designed, the tool produces a high torque. Always
use the side handle and hold the tool with both hands. The user must be prepared for sudden sticking
and stalling of the cutting tool.
Secure the workpiece. Use clamps or a vice to secure the workpiece. The workpiece is thus held
more securely than by hand and both hands remain free to operate the tool.
Wear protective gloves. The product can get hot during operation. There is a risk of injury (cutting or
burning) if the accessory tool is touched while changing it.
Use and care of electric tools
▶ Do not operate the function selector switch or the forward/reverse switch while the motor is
running. There is a risk of the gearing becoming damaged.
Careful handling and use of batteries
▶ Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
▶ Do not expose batteries to high temperatures, the direct heat of the sun, and keep them away
from fire. There is a risk of explosion.
▶ Avoid ingress of moisture. Ingress of moisture may cause a short circuit, resulting in burning injuries or
fire.
▶ Do not disassemble, squash or incinerate batteries and do not subject them to temperatures over
80°C (176°F). This presents a risk of fire, explosion or injury through contact with caustic substances.
▶ Never continue to use or attempt to charge damaged batteries, e.g. batteries with cracks, broken
parts, bent or pushed-in / pulled-out contacts).
▶ If the battery is too hot to touch it may be defective. In this case, place the power tool in a nonflammable location, well away from flammable materials, where it can be kept under observation
and allowed to cool down. Contact Hilti Service after the battery has cooled down.
3 Description
3.1 Overview of the product 1
@
;
=
%
&
(
TE-C Click chuck
Function selector switch
Grip
Forward / reverse selector switch with
safety lock
Control switch
Battery
3.2 Intended use
)
+
§
/
:
Light to illuminate the work area
Side handle
Depth gauge
Release buttons with additional function
(charge status display activation)
Battery charge status display
The product described is a battery-powered rotary hammer. It is designed for hammer drilling in concrete
and masonry, for drilling in steel, wood and masonry and for driving in and removing screws.
The TE DRS-S dust module is available as an accessory to keep dust to a minimum when working. For
information on operation and use of the dust removal system, please refer to the separate operating
instructions.
Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
4
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
encountered. The product described and its ancillary equipment may present hazards when used incorrectly
by untrained personnel or when used not as directed.
▶ Observe the national health and safety requirements.
▶ To reduce the risk of injury, use only genuine Hilti tools and accessories.
▶ Use only the Hilti lithium-ion batteries from the B22 series for this product.
▶ Do not use the battery as a power source for other unspecified appliances.
3.3 Lithium­ion battery status display
When a lithium-ion battery is used, the charge status can be displayed by tapping one of the battery release
buttons.
Status
Meaning
3 LEDs light up.
•
4 LEDs light up.
2 LEDs light up.
1 LED lights up.
1 LED blinks.
•
Charge status: 75 % to 100 %
•
Charge status: 25 % to 50 %
•
•
Charge status: 50 % to 75 %
Charge status: 10 % to 25 %
Charge status: < 10 %
Note
Battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the battery charge status LEDs blink, please refer to the information
given in the Troubleshooting section.
3.4 Items supplied
Rotary hammer, side handle, depth gauge, operating instructions.
Note
For safe, reliable operation, use only genuine Hilti spare parts and accessories. Spare parts,
accessories and consumables approved by Hilti for use with this product can be found at your Hilti
Center or at www.hilti.com.
4 Technical data
4.1 Rotary hammer
Rated voltage
Weight in accordance with EPTA procedure 01/2003
Single impact energy in accordance with EPTA procedure 05/2009
Drilling diameter range in concrete/masonry (hammer drilling)
Drilling diameter range in metal (solid-head drill bit)
Maximum length of the depth gauge
TE 2­A22
21.6 V
2.7 kg
1.5 J
4 mm … 16 mm
0 mm … 10 mm
180 mm
4.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance
with a standardized test and may be used to compare one electric tool with another. They may be used
for a preliminary assessment of exposure. The data given represents the main applications of the electric
tool. However, if the electric tool is used for different applications, with different accessory tools, or is poorly
maintained, the data may vary. This may significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: maintain the tool and the accessories, keep the hands warm, organization of
work patterns.
5
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
Noise emission values determined in accordance with EN 60745
Sound (power) level (LWA)
103 dB(A)
Emission sound pressure level (LpA)
92 dB(A)
Uncertainty for the sound power level (KWA)
3 dB(A)
Uncertainty for the sound pressure level (KpA)
3 dB(A)
Total vibration (vector sum of three directions), measured in accordance with EN 60745
Hammer drilling in concrete (ah, HD)
15 m/s²
Uncertainty (K)
1.5 m/s²
Drilling in metal (ah, D)
2.5 m/s²
4.3 Lithium­ion batteries
Battery
Rated voltage
Capacity
Weight
B 22/2.6 Li­Ion (02)
B 22/3.3 Li-Ion
1.6 Ah
2.6 Ah
3.3 Ah
21.6 V
0.48 kg
Rated voltage
Capacity
Weight
▶
B 22/1.6 Li­Ion
21.6 V
0.48 kg
21.6 V
0.78 kg
B 22/5.2 Li-Ion (01)
21.6 V
5.2 Ah
0.78 kg
Use only the Hilti battery chargers from the C4/36 series for these batteries.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com
5 Operation
Charging the battery
Note
Make sure that the outer surfaces of the battery are clean and dry before inserting the
battery in the approved battery charger.
Read the operating instructions for the charger for further information about the charging
process.
Inserting the battery
WARNING
Risk of injury Inadvertent starting of the rotary hammer.
▶
2
Before fitting the battery, check that the rotary hammer is switched off and that the
forward / reverse switch is in the middle position (i.e. safety lock engaged).
WARNING
Electrical hazard Risk of short circuiting.
▶
Before inserting the battery, check to ensure that the battery terminals and the contacts
in the rotary hammer are free from foreign objects.
WARNING
Risk of injury Hazard presented by a falling battery.
▶
A falling battery may present a risk of injury to yourself and others. Check that the
battery is securely seated in the rotary hammer.
Removing the battery
6
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
3
Fitting and adjusting the side handle
CAUTION
Risk of injury Loss of control over the rotary hammer.
▶
4
Check that the side handle is fitted correctly and tightened securely. Check that the
clamping band is engaged in the groove provided on the tool.
CAUTION
Risk of injury The depth gauge, if fitted but not used, may hinder the operator.
▶
Remove the depth gauge from the tool.
Fitting the chisel
WARNING
Risk of injury Hazard presented by a falling drill bit.
▶
5
Do not use drill bits with a C-type connection end in a drill adapter.
Note
The use of unsuitable grease may cause damage to the tool. Use only the
recommended grease supplied by Hilti.
Note
After fitting the tool, pull it in order to check that it is securely engaged and that the drill bit
turns concentrically in the chuck.
Removing the accessory tool
6
Forward / reverse
8
Fitting and adjusting the depth gauge
Drilling without hammering
Hammer drilling
7
9
9
Risk of damage Risk of the gearing becoming damaged
▶
Only use hammer drill bits with a C-type connection end.
Lighting in the workplace
Note
The LED is activated automatically when the control switch is pressed. The LED goes out
slowly after the control switch is released.
6 Care, transport and storage
6.1 Care of the rotary hammer
WARNING
Electrical hazards! Improper repairs to electrical parts may lead to serious injuries.
▶
▶
▶
▶
Electrical parts may be repaired only by trained electrical specialists.
Keep the rotary hammer, especially its grip surfaces, clean and free from oil and grease. Do not
use cleaning agents containing silicone.
Never operate the rotary hammer when the ventilation slots are blocked. Clean the ventilation slots
carefully using a dry brush. Do not permit foreign objects to enter the interior of the rotary hammer.
Clean the outside of the electric tool at regular intervals with a slightly damp cloth. Do not use a spray,
steam pressure cleaning equipment or running water for cleaning.
6.2 Cleaning the dust shield
▶
▶
▶
Clean the dust shield on the chuck with a dry, clean cloth at regular intervals.
Clean the sealing lip by wiping it carefully and then grease it again lightly with Hilti grease.
It is essential that the dust shield is replaced if the sealing lip is damaged.
7
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
6.3 Care of the lithium­ion batteries
Note
Battery discharge is stopped automatically before the battery cells suffer damage.
A conditioning charge of the battery is not necessary.
Interruption of the charging operation has no negative effect on battery life.
Charging can be started at any time with no negative effect on battery life.
If the battery no longer reaches full charge, it may have lost capacity due to aging or overstressing. It
is possible to continue working with a battery in this condition but it should be replaced in good time.
▶
▶
Charge batteries fully before using them for the first time.
Do not allow moisture to enter the interior.
6.4 Transport and storage of batteries
WARNING
Risk of fire! Risk of short circuiting.
▶
▶
▶
To avoid short circuits and associated heat generation, lithium-ion batteries should never be stored
or transported in loose, bulk form and without protective measures.
Pull the battery out of its locked position and into the first engagement position.
Observe the nationally and internationally applicable transport regulations when shipping batteries by
road, rail, sea or air.
Note
Ideally, the battery should be stored in a fully-charged state in a dry place that is as cool as
possible. Storing the battery in places subject to high ambient temperatures (e.g. by a window)
has an adverse effect on battery life and increases the rate of self-discharge.
7 Troubleshooting
▶
If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by
yourself, please contact Hilti Service.
7.1 The rotary hammer is not in working order
Trouble or fault
The rotary hammer doesn’t
start.
The LEDs indicate nothing.
1 LED blinks.
4 LEDs blink.
Possible cause
The rotary hammer has been overloaded.
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
▶
The battery is not fully inserted.
▶
The battery is discharged.
▶
The battery is too hot or too cold.
▶
The battery is discharged.
▶
The battery is too hot or too cold.
▶
The rotary hammer has been overloaded briefly.
▶
The overheating prevention cut-out
has been activated.
8
Action to be taken
▶
Switch off the rotary hammer,
remove the battery and do
not continue to use the rotary
hammer.
Push the battery in until it
engages with a double click.
Change the battery and charge
the empty battery.
Bring the battery to the recommended working temperature.
Change the battery and charge
the empty battery.
Bring the battery to the recommended working temperature.
Release the control switch and
then press it again.
Allow the rotary hammer to cool
down and clean the air vents.
7.2 The rotary hammer is in working order
Trouble or fault
No hammering action.
The control switch can’t be
pressed, i.e. the switch is
locked.
Possible cause
The rotary hammer is too cold.
The function selector switch is set
to “Drilling without hammering” .
Action to be taken
▶
▶
Bring the tip of the drill bit
into contact with the working
surface, switch the rotary
hammer on and allow it to
run. If necessary, repeat the
procedure until the hammering
mechanism begins to operate.
Set the function selector switch
to “Hammer drilling” .
The forward / reverse switch is in
the middle position.
▶
Push the forward / reverse
switch to the right or left.
The permissible operating temperature of the rotary hammer’s electronics has been exceeded.
▶
Allow the rotary hammer to cool
down.
The battery is discharged.
▶
The rotary hammer switches
itself off automatically.
The overload cut-out has been
activated.
Change the battery and charge
the empty battery.
▶
The battery runs down more
quickly than usual.
Battery condition is not optimal.
▶
Replace the battery.
The retaining lugs on the battery
are dirty.
▶
Clean the retaining lugs and refit
the battery.
Electrical fault.
▶
Switch off the rotary hammer
immediately. Remove the
battery and keep it under
observation. Allow it to cool
down. Contact Hilti service.
The drive spindle does not
rotate.
The battery does not engage with an audible "double
click".
The rotary hammer or the
battery gets very hot.
The insert tool can’t be released.
The tool makes no progress.
The rotary hammer has been over- ▶
loaded (application limit exceeded).
The chuck is not pulled back fully.
▶
The rotary hammer has been set to
reverse rotation.
▶
Release the control switch.
Allow the rotary hammer to cool
down. Press the control switch
again. Reduce the load on the
tool.
Select a tool that is suitable for
its intended use.
Pull the chuck back as far as it
will go and remove the tool.
Move the forward / reverse
selector switch to the “Forward”
position.
8 Disposal
DANGER
Risk of injury. Hazards presented by improper disposal.
▶
▶
▶
Improper disposal of the equipment may have the following consequences: The burning of plastic
components generates toxic fumes which may present a health hazard. Batteries may explode
if damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or
environmental pollution. Careless disposal may permit unauthorized and improper use of the
equipment. This may result in serious personal injury, injury to third parties and pollution of the
environment.
Dispose of defective batteries right away. Keep them out of reach of children. Do not disassemble
or incinerate the batteries.
Batteries that have reached the end of their life must be disposed of in accordance with national
regulations or returned to Hilti.
9
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
In accordance with the European Directive on waste electrical and electronic equipment and its implementation in conformance with national law, electric tools or appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
▶
Disposal of electric tools or appliances together with household waste is not permissible.
9 Manufacturer’s warranty
▶
Please contact your local Hilti representative if you have questions about the warranty conditions.
10 EC declaration of conformity
Manufacturer
Hilti Aktiengesellschaft
Feldkircherstrasse 100
9494 Schaan
Liechtenstein
We declare, on our sole responsibility, that this product complies with the directives and standards listed
below.
Designation
Type designation
Cordless rotary hammer
TE 2-A22
Generation
02
Applicable directives:
•
•
•
•
•
2004/108/EC (up to April 19, 2016)
2014/30/EU (as of April 20, 2016)
2006/42/EC
2011/65/EU
2006/66/EC
Applicable standards:
•
•
EN 60745-1, EN 60745-2-6
EN ISO 12100
Technical documentation filed at:
•
Electric tools approval department
Year of design
2011
Hilti Entwicklungsgesellschaft mbH
Hiltistraße 6
86916 Kaufering
Germany
Schaan, 05.2015
Tassilo Deinzer
(Executive Vice President / Business Unit Power
Tools & Accessories)
10
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
Paolo Luccini
(Head of BA Quality & Process Management /
Business Area Electric Tools & Accessories)
Printed: 15.10.2015 | Doc-Nr: PUB / 5077717 / 000 / 03
2023934
*2023934*
Hilti = registered trademark of Hilti Corp., Schaan
Pos. 8 | 20150518
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising