Tier 1 Connecting Your Laptop to the Projector (HDMI + Display Port

Tier 1 Connecting Your Laptop to the Projector (HDMI + Display Port
Tier 1 Connecting Your Laptop to the Projector
(HDMI + Display Port Adapter)
1. The HDMI Cable should be located near the podium or inside the Cable Cubby at the
Podium. If the adapter is not already attached to the cable it should be at the podium.
HDMI Cable
Display Port Adapter
2. If your laptop has an HDMI Port, you can connect the cable directly. If your laptop had a
Display Port, attached the adapter to the cable and then attach it to your laptop.
3. Once you are connected you can push the power button on the control panel “On.” This
should turn on the projector and lower the projection screen. If the screen does not
lower, find the switch on the wall that controls the screen and lower it manually.
Projector Power
Volume
Input buttons
4. Select “Laptop” from the Input buttons on the Control Panel. The projector should
detect input from your laptop and display content from your screen.
If you are experiencing issues using this technology during a class, please call the
IT Services STAT phone at 610-921-7828.
5. If you need to adjust the display options from your Windows laptop press the
“Windows” button and “P” button at the same time. You will have options as described
below. Duplicating your screen will display a copy of what is on your screen. Extending
your screen will allow you to drag windows to the projector screen as though it were a
second monitor.
6. If you need to adjust the display options from a MacBook:
a. press the “Apple” icon in the top left corner.
b. Select “System Preferences” in the menu.
c. Select Displays.
d. Click on the Arrangements.
7. You can change between an extended and mirrored display by clicking “Mirror Displays
in the bottom left of the window.
8. To adjust the volume of audio, use the Volume knob on the Control Panel. (See the
image above)
9. When you are finished using the podium, press the “Off” button to shut down the
projector. Please be sure to also raise the projector screen if it does not do this
automatically.
Troubleshooting
1. If you are not getting any audio, check to see if there is an additional 3.5mm audio jack
that you can plug into your headphone port to see if you get sound. There are a few
rooms where the Audio/Visual Equipment does not receive an audio signal over HDMI
cables.
If you are experiencing issues using this technology during a class, please call the
IT Services STAT phone at 610-921-7828.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising