Robustel GoRugged M1000 Smart Cellular Modem for

Robustel GoRugged M1000 Smart Cellular Modem for
Robustel GoRugged M1000 Smart Cellular Modem for GSM/GPRS/EDGE Networks
Overview „
„
„
„
„
„
„
„
„
The Robustel GoRugged M1000 is a rugged smart cellular modem offering state‐of‐the‐art GSM/GPRS (EDGE optional) connectivity for machine to machine (M2M) applications. The modem transmits data and short messages (SMS) over GSM/GPRS/EDGE mobile networks, also is controlled by firmware through a set of AT commands. Featured SMS Direct mode can transparently converts serial data (Text, binary, and Unicode formats) to SMS or vise versa without using AT Commands, verification of incoming Caller ID is implemented to block uncertified users. Support Modbus RTU slave protocol, converts alarm to text format SMS without using AT commands. Built‐in software selectable RS232 / RS485 interfaces, with 15 KV ESD serial line protections. Additional 1 Digital Input and 1 Digital Out with wireless communications via SMS. Six LED indicators provide signal strength (RSSI) and status. The modem supports a wide range of input voltages from 9 to 36 VDC and a wide range of temperature from ‐25 to 70°C. The metal enclosure can be mounted on a DIN‐rail or on the wall, also with extra ground screw. www.robustel.com info@robustel.com Robustel GoRugged M1000 Industrial Smart Cellular Modem Features „
„
„
„
„
„
„
„
„
„
„
Configuration mode and Normal mode selecting by switch Control via AT commands (Hayes 3GPP TS 27.007 and 27.005) PPP, TCP/IP stack for GPRS data transfer CSD Data Transmission Rate up to 14.4 kbps Send / receive SMS via AT commands (Under normal mode) ‐
Text and PDU SMS ‐
Point to point SMS (MT/MO) SMS Direct Mode can transparently converts serial data (Text, binary, and Unicode formats) to SMS or vise versa without using AT Commands, verification of incoming Caller ID is implemented to block uncertified users (Under Configuration Mode) Support Modbus RTU slave protocol, converts alarm to text format SMS without using AT commands Auto reboot at preset time of a day; Auto reboot via Caller ID/SMS 1xDI and 1xDO with wireless communications via SMS Remote configuration via SMS Firmware upgrade via serial interface Specifications GSM and GPRS (* EDGE optional) Standard GPRS: max. 86 kbps (DL and UL) EDGE: max. 236.8 kbps (DL and UL) Cellular Interface SIM Interface Antenna Interface Serial Interface Serial Communication Parameters Serial Signals Digital Input Band Options Quad‐Band 850/900/1800/1900 MHz GPRS Multi‐slot Class Class 10 (* Class 12 optional) GPRS Coding Schemes CS1 to CS4 CSD Data Transmission Rate Up to 14.4 kbps Output Power 1 watt GSM1800/1900, 2 watts EGSM 900/GSM 850 Number of SIMs 1 SIM Card Reader 3V, 1.8V Antenna Interface SMA Female, 50 ohms impedance Number of Ports 1 Interface DB9 Female Serial Standards RS232 and RS485 selectable by software ESD Protection 15KV Parameters 8, None, 1 Flow Control Baudrate RTS/CTS hardware flow control XON/XOFF software flow control Baud rates from 300bps to 115200bps Auto‐bauding from 1200 to 115200bps RS‐232 TxD, RxD, RTS, CTS, GND RS‐485 Data+ (A), Data‐ (B), GND Type Dry Contact www.robustel.com info@robustel.com Robustel GoRugged M1000 Industrial Smart Cellular Modem Mode Dry Contact DI or event counter On: short to GND Off: open Isolation 3K VDC or 2K Vrms Counter Frequency 900 Hz Digital Filtering Time Interval Software selectable Over‐voltage Protection 36 VDC Type Sink Mode DO or pulse output Pulse Output Frequency 1 kHz Over‐voltage Protection 40 VDC Over‐current Protection 0.5 A Isolation 3K VDC or 2K Vrms LED Indicators LED Indicators 6 LED indicators, PWR, RUN, NET and 3 level RSSI RTC Real Time Clock Built‐in real time clock with button battery Watchdog Watchdog and Timer Built‐in watchdog and timer Switch Switch Configuration mode and Normal mode selecting by switch Power Supply Interface 2‐pin 5mm pluggable terminal block Input Voltage 9 to 36 VDC Digital Output Power Supply Interface Power Requirements Physical Characteristics Environmental Limits Regulatory and Type Approvals Power Consumption Idle: 50‐60 mA @ 12 V Data Link: 100 to 200 mA (peak) @ 12 V Housing Metal Weight 300g Dimension Without ears (L x W x H): 102.4 x 71.4 x 29.4 mm With ears (L x W x H): 102.4 x 99.4 x 29.4 mm Installation Method 35mm Din‐Rail or wall mounting or desktop Operating Temperature ‐25 to 70°C Storage Temperature ‐40 to 85°C Operating Humidity 5 to 95% RH Directives RoHS and WEEE compliant CE and R&TTE Approval CE 1177 EN 61000‐4‐2 (ESD) Level 4, EN 61000‐4‐3 (RS) Level 4, EMS EN 61000‐4‐4 (EFT) Level 4, EN 61000‐4‐5 (Surge) Level 3, EN 61000‐4‐6 (CS) Level 3, EN 61000‐4‐8, EN 61000‐4‐12 Warranty Warranty Period 1 year * Function is not supported by all the models; please refer to “Selection and Ordering Data” for supported models.
Packing List „
Robustel M1000 modem x1 „
SMA antenna (Stubby antenna or Magnet antenna optional) x1 „
2‐pin 5mm pluggable terminal block for power connector x1 www.robustel.com info@robustel.com Robustel GoRugged M1000 Industrial Smart Cellular Modem „
CD with user guide and modem configuration utility x1 Optional Accessories (can be purchased separately) „
AC/DC Power Supply Adapter (Input 100 to 240VAC, output 1A @ 12VDC) x1 „
35mm Din‐Rail mounting kit x2 „
Serial cable for RS232 (DB9 Female to DB9 Male, 1.5 meters) x1 „
DB9 Male to 9‐pin 5mm pluggable terminal block for serial port and DI/DO x1 Dimensions PIN Assignment DB9 Female Connector PIN
RS232 RS485 (2‐wire)
I/O 1 Data‐ (B) 2 RXD ‐> Data+ (A) 3 TXD <‐ 4 DO 5 GND GND 6 DI 7 RTS <‐ 8 CTS ‐> 9 IO GND
Selection and Ordering Data Model No. Built‐in Module Networks M1000‐SC55IA Cinterion MC55i Quad‐Band GSM 850/900/1800/1900 MHz, GPRS Class 10 M1000‐SC55IB Cinterion MC55i Quad‐Band GSM 850/900/1800/1900 MHz, GPRS Class 10 M1000‐SCS2WA Cinterion BGS2‐W Quad‐Band GSM 850/900/1800/1900 MHz, GPRS Class 10 M1000‐SCS2WB Cinterion BGS2‐W Quad‐Band GSM 850/900/1800/1900 MHz, GPRS Class 10 M1000‐SC75IA Cinterion MC75i Quad‐Band GSM 850/900/1800/1900 MHz, GPRS/EDGE Class 12
M1000‐SC75IB Cinterion MC75i Quad‐Band GSM 850/900/1800/1900 MHz, GPRS/EDGE Class 12
o o o o o o x o x o x o o: x: Supports this feature. Does not support this feature. Subject to change without notice. RS232 RS485 Distributor Information Guangzhou Robustel Technologies Co., Limited Copyright© 2011 Robustel Technologies All Rights Reserved. WEB: http://www.robustel.com E‐MAIL: info@robustel.com www.robustel.com info@robustel.com 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising