DNS 120113 SNAPNRACK STANDARD RAIL METAL ROOF DECK

STEP 1:
DRILL 3/16" PILOT HOLE IN
PURLIN. ENSURE AREA
SURROUNDING HOLE IS FREE
FROM METAL SHAVINGS AND
DEBRIS.
REVISION:
SNAPNRACK STANDARD RAIL
STEP 2:
ATTACH METAL ROOF BASE TO
PURLIN WITH 1/4" TEK OR
EQUIVALENT SELF DRILLING
FASTENER. TORQUE TO
MANUFACTURER
SPECIFICATIONS.
STEP 3:
THREAD METAL ROOF BASE
CAP ONTO METAL ROOF BASE
BOTTOM. TAKE CARE TO
ENSURE THE BASE DOES NOT
TWIST WHEN CAP IS
TIGHTENED. ENSURE CAP IS
FULLY SEATED TO BASE.
SNAPNRACK STANDOFF
CLAMP WITH CHANNEL
NUT AND HARDWARE
SNAPNRACK
STANDARD
RAIL
SNAPNRACK
STANDOFF
SNAPNRACK STANDOFF
CLAMP WITH CHANNEL
NUT AND HARDWARE
SNAPNRACK METAL
ROOF BASE BOTTOM
SNAPNRACK METAL
ROOF BASE CAP
STEP 4:
ATTACH STANDOFF TO METAL
ROOF BASE CAP. STANDOFFS
UP TO 7" IN LENGTH MAY BE
USED.
SNAPNRACK METAL
ROOF BASE CAP
SNAPNRACK
STANDOFF
MAX HEIGHT: 7"
STEEL PURLIN
FLANGE, TYP.
1/4-20 TEK OR EQUIVALENT
SELF DRILLING FASTENER.
TORQUE TO MANUFACTURER
SPECIFICATIONS
SNAPNRACK METAL
ROOF BASE BOTTOM
STEEL PURLIN,
TYPICAL
METAL ROOF DECK
MAINSTREAM ENERGY CORP.
775 FIERO LANE, SUITE 200 SAN LUIS OBISPO, CA 93401 USA
PHONE (805) 528-9705 FAX (805) 528-9701
THE INFORMATION IN THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY. ANY REPRODUCTION,
DISCLOSURE, OR USE THEREOF IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF
MAINSTREAM ENERGY CORPORATION.
DESIGNER:
GMcPHEETERS
DRAFTER:
DRyan
SCALE:
DATE:
APPROVED BY:
DNS
PART NUMBER:
S100 PEN D12
120113
LOWER SEALING
WASHER SEALS
METAL ROOF BASE
BOTTOM TO ROOF
SURFACE
METAL ROOF
PANEL, TYPICAL
UPPER SEALING
WASHER SEALS
METAL ROOF BASE
CAP TO BOTTOM
ATTACHMENT FASTENER
1
4"
TEK SCREW TYPICAL,
INTO ROOF PURLINS.
SELECT FASTENER FOR
MINIMUM 350LB DESIGN
UPLIFT
DESCRIPTION:
REV
PEN DETAIL 12, METAL ROOF BASE WITH
STANDOFF TO PURLIN
F

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project