Antenna and Cable Accessory Guide

Antenna and Cable Accessory Guide
RC Systems has engineered and manufactured industrial electronic products for the instrumentation industry
since 1979. As critical alarm monitoring experts, we specialize in interfacing various sensors and analyzer
devices to our alarm and display products. Our products are known for their reliability, performance, and ease
of use for applications where maintenance and safety are crucial. Some of these applications include fixed and
temporary ambient gas detection as well as numerous other multi signal monitoring applications. In addition, we
provide various solutions for hard wire or wireless systems. Our wireless monitoring ability/strategy continues
to provide recognized solutions for countless customers worldwide.
Antenna and Cable
Accessory Guide
Straight Rubber Antenna 900MHz and 2.4GHz
1000-2189 900MHz straight antenna; supplied with 10-0288 and 10-0326 packaged radios (omni dipole,2dBi).
1000-2300 2.4GHz straight antenna; requires 10-0295 3/4” NPT Antenna Fitting when ordered for ST-
48RF and ST-95 XP enclosures (omni collinear,
7dBi).
Lightning Arrestor
1000-2199 The Lightning Arrestor is recommended for all outdoor base station antennas.
Yagi Antenna 2.4GHz
Straight Rubber Antenna 900MHz
1000-2309 1000-2310
2.4GHz Yagi 45 degree directional, 12dBi. For installations where a “Rubber Duck” dipole is inadequate. Supplied with 1 foot N-Female pigtail and tilt and swivel pipe mounting bracket to allow aiming towards the base station antenna.
900MHz Yagi 45 degree directional, 12dBi. For installations where a “Rubber Duck” dipole is inadequate. Supplied with 1 foot N-Female pigtail and tilt and swivel pipe mounting bracket to allow aiming towards the base station antenna.
Antenna Base Station 2.4GHz
Antenna Base Station 900MHz
1000-2310 Antenna base station 2.4GHz ,collinear 6dbi.
10-0289
Sensor Head for Atex Applications
Sensor Head
10-0203 Sensor head and calibration adapter for ATEX applications.
Quick Connectors
1000-2638
1000-2641
Quick connector; Generation 2 male 3/4” NPT for XP sensor J-box end; Division 2.
Quick connector; Generation 2 female 3/4” NPT for XP sensor J-box end; Division 2.
Antenna base station 900MHz ,collinear.
10-0247 Sensor head shown with calibration cup and splash guard.
RP-TNC Low Coax Antenna Cable
1000-2494 75’ Long RP-TNC low loss coax antenna cable.
1000-2482 50’ Long RP-TNC low loss coax antenna cable.
1000-2483 25’ Long RP-TNC low loss coax antenna cable.
1000-2484 15’ Long RP-TNC low loss coax antenna cable.
Quick Connectors
1000-2635 Quick connector; panel mount for controller end; Division 2, Generation 2.
Lock Fast Cable Guard
1000-2644
Lockfast cable guard; Division 2, Generation 2 (two supplied per cable set).
8621 Highway 6, Hitchcock, TX 77563
Tel: (409) 986-9800 Fax: (409) 986-9880
www.rcsystemsco.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising