ProSafe® 24-port 10/100 Smart Switch with 4 Gigabit Ports and 24

ProSafe® 24-port 10/100 Smart Switch with 4 Gigabit Ports and 24
ProSafe® 24-port 10/100 Smart Switch with
4 Gigabit Ports and 24 PoE Ports FS728TP
Data Sheet
Full 24-port PoE Solution Plus Easy Browser-based Management
NETGEAR® ProSafe® Smart Switches fill the gap between unmanaged and fully managed
switches. The family of ProSafe Smart Switches is designed for growing businesses that
want control over their network without the cost and complexity of a full Layer 2/Layer 3
management implementation. This PoE-capable Smart Switch, the FS728TP, provides power
and data using built-in IEEE 802.3af PoE on all 24 ports. In addition, the FS728TP offers an
intuitive Web-based management tool for quick and easy deployment and configuration
making it ideal for deploying access points, VoIP phones and IP-based surveillance cameras.
This switch is equipped with highly advanced features such as access control lists (ACL), 802.1x
port authentication, enhanced QoS, rate limiting and IGMP snooping among others to provide
a small and medium-sized business with a network that is geared for growth while providing
scalability and reliability. With the utility of 24 10/100 Mbps ports, four copper 10/100/1000
Mbps ports and two combination (copper/hot-swappable small form-factor pluggable (SFP))
Gigabit ports for optional fiber connectivity, growing business networks, classrooms and
workgroups can benefit from superior performance and keep up with expanding network needs.
This high-performing switch features a non-blocking wire-speed architecture with an 12.8 Gbps
switching capacity for maximum data throughput. All 28 RJ-45 ports automatically negotiate to
the highest speed and support Auto Uplink™ technology to make the right link.
Full-featured, Flexible Power over Ethernet (PoE)
With a total power budget of 192 Watts, customers can choose to plug in up to 24 Ethernet
or Fast Ethernet devices and mix in up to 24 802.3af IP-based devices. Power-over-Ethernet
(PoE), optimizes the installation and power management of network devices such as wireless
access points (AP), Voice over IP (VoIP) phones, and IP-based surveillance cameras. Power-overEthernet (IEEE 802.3af) capabilities reduce installation time and costs for many new network
productivity devices. Free your wireless AP deployments and IP cameras from the restrictions of
power outlet proximity using a standard Cat 5 UTP cable. Enable uninterruptible power supply
for all your PoE devices by powering your switch from a UPS device.
Advanced Security
These switches also provide advanced features that provide more robust security to the SMBs.
These include:
•802.1x for authentication
•ACL filtering to permit or deny traffic based on MAC and IP addresses.
Advanced Quality of Service
Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion
from high traffic bursts. Companies implementing network telephony or video conferencing,
for example, need to be able to prioritize such voice and video traffic and other real-time
applications over less latency-sensitive traffic to ensure reliability and quality. The ability to
prioritize traffic ensures quality of latency-sensitive services and applications despite increasing
traffic loads. The ProSafe FS728TP provides several advanced QoS features:
•802.1p based prioritization
•Layer 3-based (DSCP) prioritization
•Rate limiting
24 / 7
S U P P O R T*
1-888-NETGEAR (638-4327)
ProSafe ® 24-port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports
“Smart” Management Features
Manage all ProSafe Smart Switches as from an easy-to-use Web console that can be used to
configure all features, as well as monitor and trouble-shoot. These switches also have SNMP
(v1, 2c and 3) to collect and track data to monitor the network health, as well as manage
devices, and more easily enforce critical IT controls and policies. SNMP v2c is most commonly
deployed, as it provides better reporting capabilities than SNMP v1. Companies interested in
more robust security may opt for SNMP v3, which provides data encryption.
All ProSafe Smart Switches provide world-class reliability. These switches are optimized
for ProSafe Network Management Software (NMS200) and works with other SNMP-based
management software.
Like all NETGEAR ProSafe Smart Switches, the FS728TP is backed by the NETGEAR ProSafe
Lifetime Warranty†, and 1-Year ProSupport 24x7 Advanced Technical Support*.
FVS336G ProSafe Dual
WAN Gigabit Firewall
with SSL & IPsec VPN
FS728TP ProSafe 24-port
10/100 Smart Switch
with 4 Gigabit Ports and 24 PoE Ports
Servers with
GA311 Gigabit NICs
VoIP Phones
Gigabit Links
IP Camera
Notebook PCs with
WG511T 54 Mbps
Wireless PC Card
Technical Specifications
•Network Protocol and Standards
––IEEE 802.3 10BASE-T
––IEEE 802.3u 100BASE-TX
––IEEE 802.3ab 1000BASE-T
––IEEE 802.3z 1000BASE-X
––IEEE 802.3x full-duplex flow control
––IEEE 802.3af (Power over Ethernet)
•Power Supply
––Power consumption: 256W maximum
––100-240VAC/50-60-Hz universal input
––PoE budget: 192W
•Network Ports
––24 10/100 Mbps auto sensing
Fast Ethernet
––4 10/100/1000 Mbps auto-sensing
Gigabit Ethernet switching ports
––2 Dual Personality SFP slots
•Physical Specifications
––Dimensions: (w x d x h)
440 x 257 x 43 mm
(17.3 x 10.1 x 1.7 in)
––Weight: 3.57 kg (7.86 lb)
Desktop PCs with
FA311 10/100 NICs
ProSafe 802.11g
Wireless Access Point
•Electromagnetic Emissions
––CE EN 55022, EN 61000 and
EN 55024
––FCC Part 15 Class A
––VCCI Class A
•Environmental Specifications
––Operating temperature: 32° to 122° F
(0° to 50° C)
––Storage temperature: -4° to 158° F
(-20° to 70° C)
––Operating humidity: 90% maximum
relative humidity, non-condensing
––Storage humidity: 95% maximum
relative humidity, non-condensing
––Operating altitude: 10,000 ft
(3,000 m) maximum
––Storage altitude: 10,000 ft
(3,000 m) maximum
––Per port (10/100 and Gigabit):
Link/activity, speed
––Per device: Power, Fan
––Per PoE port: PoE Power, PoE fault
––UL/cUL 60950
––CE EN 60950
System Requirements
––Category 5 UTP Network cables or above
––Network card for each PC
––Network software (e.g., Windows®)
––Web browser (e.g., Internet Explorer
6.0 or higher, Netscape 6.0 or higher)
Administrative Switch Management
––IEEE 802.1Q static VLAN
(128 groups, static)
––IEEE 802.1p Class of Service (CoS)
––Port-based QoS
––DSCP-based QoS
––IEEE802.3ad link aggregation
(manual or LACP)
––IEEE 802.1D Spanning Tree
Protocol (STP)
––IEEE 802.1w Rapid Spanning
Tree Protocol (RSTP)
––IEEE 802.1s Multiple Spanning
Tree Protocol (MSTP)
––IEEE 802.1ab Link Layer Discovery
Protocol (LLDP)
ProSafe ® 24-port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports
––SNMP v1, v2c, v3
––RFC 1213 MIB II
––RFC 1643 Ethernet interface MIB
––RFC 1493 bridge MIB
––RMON group 1, 2, 3, 9
––RFC 2131 DHCP client
––Auto voice VLAN
––DHCP Filtering
––Auto denial-of-service (DoS) protection
––Ping and traceroute
––Power saving when link down
––IEEE 802.1x
––Port-based security by locked
MAC addresses
––IP and MAC ACL
––Storm control for broadcast, multicast
and unknown unicast packets
––IGMP snooping v1/v2
––Protected Port
––PoE Timer
––Port-based ingress and egress rate
––Port mirroring support (many to one)
––Web-based configuration
––Configuration backup/restore
––Password access control
––RADIUS Support
––TACACS+ support
––Firmware upgradeable
––Cable test
350 E. Plumeria Drive
San Jose, CA 95134-1911 USA
1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR
Performance Specifications
––Forwarding modes: Store-and-forward
––Bandwidth: 12.8 Gbps
––Network latency: <4µs for 64-byte
frames in store-and-forward mode for
100 Mbps to 100 Mbps transmission
––Buffer memory: 1 MBytes per system
––Address database size: 4,000 media
access control (MAC) addresses
per system
––Addressing: 48-bit MAC address
––Mean time between failures (MTBF):
237,497 hours (~27 years)
––Acoustic noise: 38.1 dBA
Package Contents
––24-port PoE Smart Switch with Gigabit
Ports (FS728TP)
––Rubber footpads
––Power cord
––Rack-mount kit
––Resource CD
––Installation guide
Ordering Information
––North America: FS728TP-200NAS
––Europe: FS728TP-200EUS
––Asia: FS728TP-200AUS
––Japan: FS728TP-200JPS
––AGM731F 1000BASE-SX SFP Module
––AGM732F 1000BASE-LX SFP Module
––AGM733 1000BASE-ZX SFP Module
Warranty and Support
––ProSafe Lifetime Warranty†
––ProSupport 24x7 Advanced Technical
Support, 1 year (included)*
ProSupport™ Service Packs Available
––XPressHW, Category 1: PRR0331
(3-year next-business day hardware
replacement contract)
––OnCall 24x7, Category 1: PMB0331
(3-year Advanced Technical Support
contract, including Remote Diagnostics
performed by our technical experts for
prompt resolution of technical issues,
and next-business day hardware
© 2012 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, Connect with Innovation, Auto Uplink, ProSafe and ProSupport are trademarks of
NETGEAR, Inc. in the United States and/or other countries. Other brand names mentioned herein are for identification purposes only and may
be trademarks of their respective holder(s). Information is subject to change without notice. All rights reserved.
* 1-year 24x7 Advanced Technical Support includes Remote Diagnostics performed by our technical experts for prompt resolution
of technical issues.
Lifetime warranty for product purchased after 05/01/2007. For product purchased before 05/01/2007, warranty is 3 years.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF