MSR 210 SERIES
MSR210 Simple Manual
2002/7/11
MSR 210 SERIES
Magnetic Stripe Card Reader
Keyboard Interface
Thank you for purchasing the MSR210 series products. The MSR210 Series Keyboard Interface Magnetic Card Reader is ideal for
retail systems, time keeping systems, security systems and the card reader related systems. The MSR210 series are designed to offer
the user a card reader solution that will complement many applications. Triple track MSR210 reader is uniquely designed to read
both credit cards and Driver Licenses (AAMVA and California standard).
FEATURES
1
2
3
4
5
6
7
LED and Buzzer indicators indicate the status of reader.
Single, dual, or triple track versions allow to reading ISO, AAMVA and DMV cards.
User-friendly setting directly by keyboard.
PC could be powered on with MSR210 attached and without keyboard connected.
Programmable data output.
Compact size that can be mounted on keyboard or any flat surface.
Firmware download (Note: It can't be executed via Notebook PC.)
CONFIGURATION
MSR210-12 Dual track 1&2
MSR210-23 Dual track 2&3
MSR210-33 Triple track 1&2&3
Note: Optional configuration is available.
AGENCY APPROVED
-- Comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules.
-- Comply with CE mark Class A, UL, and cUL
-- This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
WARRANTY
This product is served under one-year warranty of defects in material and functionality to the original purchasers. Within the
warranty period, if the product found to be defective will be repaired or replaced. This warranty applies to the products only under
the normal use of the original purchasers, and in no circumstances covers incidental or consequential damages through consumers’
misuse or modification of the product.
WARNING
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
SET-UP
1) Turn the system power off.
2) Connect one connector of Y cable to the keyboard cable.
3) Connect another one of Y cable to the keyboard port of your system.
4) Turn the system power on.
SPECIFICATIONS
Recording Method:
Swipe Speed:
Power Requirements:
Communication:
Operating Temp:
Storage Temp:
Humidity:
Magnetic Head Life:
Dimensions:
Weight:
Two-frequency coherent phase (F2F), compatible with ISO 7811 and AAMVA.
5 to 55 in/sec (worst case with ±12% jitter card)
Reader is low-power CMOS. The computer supplies power.
Keyboard simulator interface
- 10°C to + 50°C
-30°C to +70°C
Operating: 10-85% (non condensing); Storage: 10-90% (non condensing)
500K swipes Min. (1M swipes optional)
100L x 34W x 27H mm (3.94L x 1.34W x 1.10H inch)
170g (6.0oz)
UDC: PM012-S
Page 1 / 4
--- Proprietary and Confidential ---
MSR210 Simple Manual
2002/7/11
OUTPUT DATA FORMAT
SINGLE TRACK: <SS><TRACK1 or 2 or 3 DATA><ES><CARRIAGE RETURN>
DUAL TRACKS: <SS><TRACK1 or 2 DATA><ES><CARRIAGE RETURN>
<SS><TRACK2 or 3 DATA><ES><CARRIAGE RETURN>
TRIPLE TRACKS: <SS><TRACK1 DATA><ES><CARRIAGE RETURN><SS><TRACK2 DATA><ES><CARRIAGE
RETURN><SS><TRACK3 DATA><ES><CARRIAGE RETURN>
SS = START SENTINEL TRACK1 “%” (ISO, DMV & AAMVA)
TRACK2 “;”
(ISO, DMV & AAMVA)
TRACK3 “;”
(ISO) “%” (AAMVA) “!” (DMV)
ES = END SENTINEL
TRACK1 & 2 & 3 “?” (ISO, DMV & AAMVA)
Data characters in italics are optional!
NOTICE: The issuer of this manual has made every effort to provide accurate information. The issuer should not be held liable for
any technical and editorial omission or errors made herein; nor for incidental consequential damages resulting from the furnishing,
performance or use of this material. This document contains proprietary information that is protected by copyright. All rights are
reserved. No part of this document may be photocopied, reproduced, or translated without the prior written consent of the issuer. The
information provided in this manual is subject to change without notice.
Using the Configuration Mode to Configure the Card Reader
How to enter Configuration Mode
1. Power off PC, connect the reader with PC and then power on.
2. Execute text editor program such as Microsoft Word, Notepad, DOS PE2, Edit, …etc.
3. Press and hold [Left-Ctrl], [Left-Alt] and [F10] keys in order to enter Configuration Mode.
4. Operating step-by-step following instructions as shown on the screen.
5. While in Configuration Mode, the green LED is always blinking. After exiting this Configuration Mode, the reader will be reset
automatically.
6. The main menu of Configuration Mode is as below:
**** CONFIGURATION MODE ****
1:SET INTERFACE
2:SET MAGNETIC STRING
3:SET STRING EDITING
4:SET BUZZER
5:RESET TO DEFAULT
6:SHOW STATUS
7:SET KEYBOARD CONFIGURATION
0:EXIT SETUP MODE
How to exit Configuration Mode
Once user choose “0” to exit Configuration Mode, the reader will be reset and execute the modified settings.
The Setting Selections are as below:
1:SET INTERFACE
1:SET KEYBOARD COUNTRY
**** SET KEYBOARD COUNTRY ****
1:U.S.
2:GERMAN
3:FRANCE
4:UK ENGLISH
5:SPANISH
6:ITALY
7:DUTCH
8:PORTUGUESE
9:SWEDISH
A: DANISH
0:BACK
READER STATUS = U.S.
2:SET TRANSMIT SPEED
**** SET TRANSMIT SPEED ****
1:25 CHARACTER/SEC
2:40 CHARACTER/SEC
3:60 CHARACTER/SEC
4:80 CHARACTER/SEC
5:120 CHARACTER/SEC
0:BACK
READER STATUS = 80 CHAR/SEC
3:FIRMWARE VERSION AND DATE
2100124A 27-JUN-2002 NICK
0:BACK
2:SET MAGNETIC STRING
1:SET ENABLE TRACKS
**** ENABLE TRACKS ****
1:TRACK 1
2:TRACK 2
3:TRACK 1,2
4:TRACK 3
5:TRACK 1,3
6:TRACK 2,3
7:TRACK 1,2,3
0:BACK
READER STATUS = TRACK 1,2,3
2:SET REQUIRE TRACKS
**** REQUIRE TRACKS ****
1:TRACK 1
2:TRACK 2
3:TRACK 1,2
4:TRACK 3
5:TRACK 1,3
6:TRACK 2,3
7:TRACK 1,2,3
8:ANY TRACK
0:BACK
READER STATUS = ANY TRACK
UDC: PM012-S
Page 2 / 4
--- Proprietary and Confidential ---
MSR210 Simple Manual
2002/7/11
3:CARRIAGE RETURN
**** CARRIAGE RETURN ****
1:DON’T SEND CARRLAGE RETURN
2:AFTER ALL TRACKS
3:AFTER EACH TRACK
4:AFTER ALL DATA
0:BACK
READER STATUS = AFTER EACH TRACK
4:TRANSMIT SS/ES
**** SS/ES SEND ****
1:SEND
2:NO SEND
0:BACK
READER STATUS = ENABLE
5:CAPS LOCK
1:ENABLE
2:DISABLE
0:BACK
READER STATUS = ENABLE
6:TRACK OUTPUT ORDER
1:TRACK 1
2:TRACK 2
3:TRACK 3
0:BACK
READER STATUS = 1,2,3
7:CHANGE CARRIAGE RETURN CODE
1:CHANGE
2:RESET
0:BACK
READER STATUS = [ENTER]
8:OUTPUT CR IF READ NOTHING
1:ENABLE
2:DISABLE
0:BACK
READER STATUS = DISABLE
0:BACK
3:SET STRING EDITING
1:SET PREFIX
1:TRACK 1
2:TRACK 2
3:TRACK 3
0:BACK
1(or 2,3)
**** SET TRACK 1(or 2,3) PREFIX ****
1:ENABLE
2:DISABLE
0:BACK
READER STATUS = DISABLE
1
ENTER PREFIX (6 CHARS MAX) THEN PRESS `
WHEN FINISHED
IMPORTANT! [CAPS] KEY IS NOT ALLOWED
2:SET SUFFIX
1:TRACK 1
2:TRACK 2
3:TRACK 3
0:BACK
1(or 2,3)
**** SET TRACK 1(or 2,3) SUFFIX ****
1:ENABLE
2:DISABLE
0:BACK
READER STATUS = DISABLE
1
ENTER PREFIX (6 CHARS MAX) THEN PRESS `
WHEN FINISHED
IMPORTANT! [CAPS] KEY IS NOT ALLOWED
3:SET MAGNETIC STRIPE PREAMBLE
**** SET PREAMBLE ****
1:ENABLE
2:DISABLE
0:BACK
READER STATUS = DISABLE
1
ENTER PREAMBLE (6 CHARS MAX) THEN
PRESS ` WHEN FINISHED
IMPORTANT! [CAPS] KEY IS NOT ALLOWED
4:SET MAGNETIC STRIPE POSTAMBLE
**** SET POSTAMBLE ****
1:ENABLE
2:DISABLE
0:BACK
READER STATUS = DISABLE
1
ENTER POSTAMBLE (6 CHARS MAX) THEN
PRESS ` WHEN FINISHED
IMPORTANT! [CAPS] KEY IS NOT ALLOWED
5:BLOCK OUTPUT ORDER
**** SET BLOCK OUTPUT ORDER ****
1:TRACK 1
2:TRACK 2
3:TRACK 3
0:BACK
1
1:BLOCK A
2:BLOCK B
3:BLOCK C
0:BACK
1
** SET TRACK1 BLOCK A **
READER STATUS = ISO
START=01
END=90
1:DMV
2:AAMVA
3:ISO
9:DISABLE
0:BACK
3
START=1
END=90
6:SEND CONTROL
1:SET KEY
2:ANY KEY
3:DISABLE
0:BACK
READER STATUS = DISABLE (ANY KEY)
7:FIELD OUTPUT ORDER
1:ENABLE
2:DISABLE
0:BACK
READER STATUS = DISABLE
8:EXP DATE FORMAT
1:YYMM
2:MMYY
0:BACK
READER STATUS = YYMM
9:EXP DATE SEPARATOR
1:CHANGE
2:RESET
0:BACK
READER STATUS = DISABLE
0:BACK
UDC: PM012-S
Page 3 / 4
--- Proprietary and Confidential ---
MSR210 Simple Manual
2002/7/11
4:SET BUZZER
**** SET BUZZER ENABLE/DISABLE ********
1:ENABLE
2:DISABLE
0:BACK
READER STATUS = ENABLE
5:RESET TO DEFAULT
1:RESET TO DEFAULT
0:BACK
6:SHOW STATUS
KEYBOARD COUNTRY=U.S.*
TRANSMIT SPEED=80 CHAR/SEC*
ENABLE TRACKS=TRACK 1,2,3*
REQUIRE TRACKS=ANY TRACK*
CARRIAGE RETURN=AFTER EACH TRACK*
SS/ES SEND=ENABLE*
CAPS LOCK=ENABLE*
BUZZER=ENABLE*
DATA OUTPUT=1,2,3*
KEYBOARD=STANDARD CONFIGURATION*
PRESS 0 TO BACK
TRACK 1 PREFIX=DISABLE*
TRACK 2 PREFIX=DISABLE*
TRACK 3 PREFIX=DISABLE*
TRACK 1 SUFFIX=DISABLE*
TRACK 2 SUFFIX=DISABLE*
TRACK 3 SUFFIX=DISABLE*
PREAMBLE=DISABLE*
POSTAMBLE=DISABLE*
PRESS 0 TO BACK
TRACK1 BLOCK A=ISO (DISABLE*)
START=01
END=90
TRACK1 BLOCK B=DISABLE
TRACK1 BLOCK C=DISABLE
TRACK2 BLOCK A=DISABLE
TRACK2 BLOCK B=DISABLE
TRACK2 BLOCK C=DISABLE
TRACK3 BLOCK A=DISABLE
TRACK3 BLOCK B=DISABLE
TRACK3 BLOCK C=DISABLE
7:SET KEYBOARD CONFIGURATION
1:KEYBOARD STANDARD CONFIGURATION*
2:KEYBOARD SPECIFIC CONFIGURATION
0:BACK
KEYBOARD = STANDARD CONFIGURATION
0:EXIT SETUP MODE
* Default Setting
UDC: PM012-S
Page 4 / 4
--- Proprietary and Confidential ---
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising