USB 2.0 to Fast Ethernet Adapter

USB 2.0 to Fast Ethernet Adapter
USB 2.0 to Fast Ethernet Adapter
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
respective owners.
Contents:
Chapter 1: Introduction ............................. 3 1.1 Product Introduction ....................................................3 1.2 Features........................................................................3 1.3 System Requirements ..................................................4 1.4 Package Contents .........................................................4 Chapter 2: Getting Started ......................... 4 2.1 Hardware Installation ..................................................4 2.2 Driver Installation ........................................................5 2.2.1 Installation for Windows XP/Vista/7 ....................5 2.2.2 Installation for Mac OS X 10.5/10.6.....................6 2.3 Hardware Verify...........................................................8 2.3.1 Verifying for Windows XP/Vista/7 .......................8 2.3.2 Verifying for Mac OS X 10.5.x/10.6.x..................8 MN3000000070 Page 2 Chapter 1: Introduction
1.1 Product Introduction This USB 2.0 to Fast Ethernet Adapter add a single RJ-45 Ethernet
networking port to a USB enabled computer system with link speeds
10/100 Mbps. Backwards compatible with USB 1.x computer system,
this compact and portable adapter is ideal as a desktop replacement
network adapter or laptop accessory.
1.2 Features 
Compliant with the Standard Specification of USB 1.1 and 2.0

Compliant
with
IEEE
802.3
(10Base-T)
and
802.3u
(100Base-TX)

Support Full Duplex Operation in 10/100 Mbps Modes

Support USB Full and High Speed modes with bus power
capacity

Upstream port: USB type A

Downstream port: RJ45

LEDs indicate the status of Power status and Ethernet connection
MN3000000070 Page 3 
Support Windows® XP/Vista/7 (32/64 bit); Mac OS 10.5 or later
1.3 System Requirements 
Windows® XP/Vista/7 (32/64 bit); Mac OS X 10.5 or later

Available USB port
1.4 Package Contents 
1 x USB 2.0 to Fast Ethernet Adapter

1 x Driver CD

1 x User Manual
Note: Contents may vary depending on country/market.
Chapter 2: Getting Started
2.1 Hardware Installation 1.
Plug the USB 2.0 to Fast Ethernet Adapter directly into an
available USB port on your computer.
2.
Connect one end of your network cable into the RJ45 port of USB
2.0 to Fast Ethernet Adapter.
3.
Connect the other end of the network cable into an available
MN3000000070 Page 4 Ethernet port on your router, switch, or any other networking
device.
2.2 Driver Installation The following section shows you how to install the USB 2.0 to Fast
Ethernet Adapter driver on different operating systems.
Important! Do not connect the USB 2.0 to Fast Ethernet to your PC
before the install.
2.2.1 Installation for Windows XP/Vista/7 1.
Insert the provided CD into your disk drive. The CD-ROM will
start automatically. The following screen will show up and please
click “Install Driver”.
MN3000000070 Page 5 Note: If the install program doesn’t run automatically, please
locate and double-click on the Autorun.exe file in the CD to
launch the install program.
2.
Please click “USB 100M” to start the installation.
3.
Follow the instructions on screen to install the driver.
2.2.2 Installation for Mac OS X 10.5/10.6 1.
Insert the provided CD into your CD-ROM drive.
2.
Double-click the “Ethernet Adapter” disc icon, double-click
“Drivers” folder.
MN3000000070 Page 6 3.
Double-click “USB 100M” folder, and then double click the “For
Mac OS X 10.5/10.6.pkg” file to launch the installer.
4.
Follow the instructions on screen to install the driver. After driver
installation is complete, you must restart your computer.
MN3000000070 Page 7 2.3 Hardware Verify 2.3.1 Verifying for Windows XP/Vista/7 1.
Click on the “Device Manager” tab in the Windows Control
Panel.
Start > Control Panel > Device Manager
2.
Entry “Network adapters” item, and you can read “HighSpeed
USB-Ethernet Adapter” in the Device Manager.
2.3.2 Verifying for Mac OS X 10.5.x/10.6.x 1.
Choose About this Mac from the Apple menu.
2.
Click on More Info…
MN3000000070 Page 8 3.
In the Contents sidebar select USB from the Hardware section.
4.
Scroll the list to reveal the USB 2.0 to Fast Ethernet Adapter
information
MN3000000070 Page 9 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising