External MINI-SAS Passive Copper Cable

External MINI-SAS Passive Copper Cable
External MINI-SAS Passive Copper Cable
Features

MINI SAS conforms to the SFF-8088 and SFF-8086

Compliant with all SAS and SATA defined keying

Support Mini SAS ( SAS 2.0 & 2.1) and Mini SATA 4x
external I/O requirements

4-Channel Full-Duplex Passive Copper Cable
Transceiver

Data rates up to 6Gbps (per channel)

Copper link length up to 5m (passive limiting)

High-Density MINI SAS 26-PIN Connector

Temperature Range: 0~ 70 °C

ROHS compliant
Applications

Storage Devices

Servers

Switches

RAID system

External MINI SAS/SATA HBA interfaces

Data centers
Standards compliance

SFF-8088/SFF-8086

SAS 2.1

RoHS
Product Description
LONGLINE external mini-SAS passive cable assemblies is high speed multi-lane interconnect
solutions. The mini-SAS cables data rates up to 3Gbps and 6Gbps per lane, these cables also
support SATA networking requirement at 1.5Gbps, 3Gbps and 6Gbps per lane. These multilane cable
meet
Page 1 of 4
SAS or SATA requirements, these are compliant to SFF-8086 and SFF-8088 standards.
Mechanical Dimensions
Page 2 of 4
Schematic for passive copper cables
MINI-SAS Copper Module
Pin Descriptions
Pin
Symbol
Name/Description
A1
A2
A3
A4
GND
Ground
RX 0+
Receiver Non-Inverted Data output
RX 0-
Receiver Inverted Data output
GND
Ground
Page 3 of 4
A5
A6
A7
A8
A9
A10
A11
A12
A13
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
RX 1+
Receiver Non-Inverted Data output
RX 1-
Receiver Inverted Data output
GND
Ground
RX 2+
Receiver Non-Inverted Data output
RX 2-
Receiver Inverted Data output
GND
Ground
RX 3+
Receiver Non-Inverted Data output
RX 3-
Receiver Inverted Data output
GND
Ground
GND
Ground
TX 0+
Transmitter Non-Inverted Data input
TX 0-
Transmitter Inverted Data input
GND
Ground
TX 1+
Transmitter Non-Inverted Data input
TX 1-
Transmitter Inverted Data input
GND
Ground
TX 2+
Transmitter Non-Inverted Data input
TX 2-
Transmitter Inverted Data input
GND
Ground
TX 3+
Transmitter Non-Inverted Data input
TX3-
Transmitter Inverted Data input
GND
Ground
Ordering information
Part Number
1, 2, 3, 4, 5 meters
Length(meter)
1
2
3
4
5
Wire gauge(AWG)
28
28
28
26
26
Page 4 of 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising