Sintesi range

Sintesi range
Sintesi range
Professional lighting
equipment for theatres
General features
Sintesi range
The Sintesi name and
range were created from
the idea to bring
together into one line of
high level luminaires all
the major technical
features gathered from
30 years of experience in
theatre lighting
Yoke mounted onto sliding rails for correct balancing… and positioning
Safety bond attachment
Automatic power cut out by bipolar microswitch on
opening the lamp-tray
PCs, Fresnels and Profiles, all with lamp-tray hinged to the housing which can be completely removed for
easy maintenance
Technical features
Products designed for professional use
even under difficult conditions that
guarantee:
Durability
Die-cast extruded aluminium housing,
shockproof with anti-scratch paint
Cooling
By dissipation through a finned
extruded aluminium surface and by
convection through various slots which
on the back of the luminaire enhance
ventilation when the unit is positioned
at a steep angle
Safety
Long-Lasting Performance
Rustproof body, high capacity electrical
components with high-temperature
insulation and tempered glass lenses
All luminaires are CE labelled in
accordance with the EN 60598-2-17
standards for professional lighting
fixtures for public venues and theatres
Profiles
Removable lantern and optics (Excluding FIGURA 05)
Fast-locking levers exclusively designed for reduced
obstruction or traditional screw-knobs
(available on request)
4 removable shaping shutters
mounted between plates specially
treated with an anti-abrasive surface
and locked by long-extension springs
to allow the shutters to be moved
smoothly and precisely
Die-cast extruded aluminium housing for thermal
dissipation at high temperature
Easy access for maintenance to the zoom lenses
through two sliding doors
Fine adjustment for Peak/Even
positioning
PC & Fresnel
Accessory top covered by lockable door operated by
a safety-spring to avoid spill light with ventilation
gaps on 1200/2500W models
Focus adjustment by an
endless screw mechanism
Lens mounted onto
extended holders to allow
ventilation
Light centre length set for
various lamps without the need
for special tools
Plano-Convex (PC) and Fresnel
300/500/650W Halogen
Mod. Vario 05 - Area 05
Lux
27808
6952
3090
1738
1112
0.17
0.35
0.52
0.70
0.87
2
4
6
8
10
Lux
1502
376
167
94
60
Ø (m)
2.13
4.25
6.38
8.51
10.63
2
4
6
8
10
Ø (m)
SPOT 5°
Dist. (m)
FLOOD 56°
VARIO 05
A plano-convex luminaire with a
defined beam, variable from 5° to 56°
Barndoors optional
Dist. (m)
TESTED WITH LAMP CP89 650W 230V
Lux
19280
4820
2142
1205
771
0.24
0.49
0.73
0.98
1.22
2
4
6
8
10
Lux
1853
463
206
116
74
Ø (m)
2.40
4.81
7.21
9.61
12.02
2
4
6
8
10
Ø (m)
SPOT 7°
Dist. (m)
FLOOD 62°
AREA 05
Fresnel luminaire with a soft-edged
beam, variable from 7° to 62°
Barndoors optional
Dist. (m)
TESTED WITH LAMP CP89 650W 230V
Vario 05 PC
Area 05 Fresnel
Technical features
Mechanical
Electrical
•
•
•
•
Standard 230V, 50/60Hz power supply (others available on request)
Lamp-holder type GY 9.5
2m power supply cable (plug available on request)
Strain relief cable clamp entry into light housing
• Die-cast extruded aluminium housing
• Black external anti-scratch Epoxy Resin paint
• Black optical internal paint to give no light reflection and hightemperature resistance
• Labyrinth ventilation to avoid light spillage
Safety
Operational
• Automatic power cut-out by bipolar microswitch on opening the
lamp-tray
• Safety mesh
• Safety bond attachment
• Filter-frame locking system
• Compliance to CE EN 60598-2-17 standards
Optical
• Spherical reflector in 99.99% polished and treated aluminium: 70mm diameter
• 110mm diameter borosilicate lens mounted onto extended holders to
allow ventilation
VARIO 05 PC
• Lamp-tray hinged to the housing and completely removable for easy
maintenance
• Yoke with 10mm diameter hole, adjustable height, reversible and sliding
into extruded rails to balance accessories and for use in any position
• Accessory top covered by a door
• Heat insulated knobs and handles
• Quick tilt positioning with fast-locking levers
• Focus adjustment by an endless screw mechanism operated by rear knob
AREA 05 FRESNEL
322
276
273
226
215
150
150
259
277
215
150
150
size mm.
Net weight Kg 3.3 - Gross weight Kg 3.6 - Box volume m3 0.017
size mm.
Net weight Kg 2.9 - Gross weight Kg 3.3 - Box volume m3 0.017
Code
Information for ordering accessories and different versions
• Vario 05 PC with safety net
• Area 05 Fresnel with safety net
VA 05
AR 05
Accessories
• Colour filter frame
• 4-door rotatable barndoors
• Safety bond
• Theatre C-hook in black painted steel for 30 to 50mm diameter tubes
• TV C-hook in die-cast aluminium (PIVOT DIN adaptor required)
• 29mm / M10 spigot adapter
• Aluminium clamp for 50mm diameter tubes
• Superclamp
• Colour changing scroller, DMX 512 or 0/10V controlled
TC S05
PL 4 S05
FUNE
GAC
A8
PIVOT DIN
HC / 500
CLAMP
on request
Options
• Clear lens for Vario 05 PC
• 100-120V lamp version
on request
on request
Lamps
Type / Order code
Power (W)
Lampholder
Light-centre/base lamp distance (mm)
Luminous flux (Lumen)
Life time (hours)
Colour temperature (°K)
Supply voltage (V)
Nominal current (Amp.)
Long life (2950 °K)
M 38
300
GY 9.5
46.5
5200
2000
2950
230
1.3
M 40
500
GY 9.5
46.5
10000
2000
2950
230
2.17
Theatre (3050 °K)
T 18
500
GY 9.5
46.5
11000
360
3050
230
2.17
T26
650
GY 9.5
46.5
14500
600
3050
230
2.8
Film/TV (3200 °K)
CP 81
300
GY 9.5
46.5
7800
180
3200
230
1.3
CP 82
500
GY 9.5
46.5
13500
180
3200
230
2.17
CP 89
650
GY 9.5
46.5
17500
180
3200
230
2.8
Plano-Convex (PC) and Fresnel
1000/1200W Halogen
Mod. Vario 12 - Area 12
Lux
17725
4431
1969
1108
709
0.28
0.56
0.84
1.12
1.40
4
8
12
16
20
Lux
655
164
73
41
26
Ø (m)
4.90
9.80
14.71
19.61
24.51
4
8
12
16
20
Ø (m)
SPOT 4°
Dist. (m)
FLOOD 63°
VARIO 12
A plano-convex luminaire with a
defined beam, variable from 4° to 63°
Barndoors optional
Dist. (m)
TESTED WITH LAMP CP90 1200W 230V
Lux
10269
2567
1141
642
411
0.49
0.98
1.47
1.96
2.45
4
8
12
16
20
Lux
885
221
98
55
35
Ø (m)
4.0
8.1
12.1
16.1
20.2
4
8
12
16
20
Ø (m)
SPOT 7°
Dist. (m)
FLOOD 53°
AREA 12
A Fresnel luminaire with a soft-edged
beam, variable from 7° to 53°
Barndoors optional
Dist. (m)
TESTED WITH LAMP CP90 1200W 230V
Vario 12 PC
Area 12 Fresnel
Technical features
Mechanical
Electrical
•
•
•
•
Standard 230V, 50/60Hz power supply (others available on request)
Lamp-holder type GX 9.5
2m power supply cable (plug available on request)
Strain relief cable clamp entry into light housing
• Die-cast extruded aluminium housing
• External black anti-scratch Epoxy resin paint
• Black optical internal paint to give no light reflection and hightemperature resistance
• Labyrinth ventilation to avoid light spillage
Safety
Operational
• Automatic power cut-out by bipolar microswitch on opening the
lamp-tray
• Safety mesh
• Safety bond attachment
• Filter-frame locking system
• Compliance to CE EN 60598-2-17 standards
Optical
• Spherical reflector in 99.99% polished and treated aluminium: 100mm diameter
• 150mm diameter borosilicate lens mounted onto extended holders to
allow ventilation
VARIO 12 PC
• Lamp-tray hinged to the housing and completely removable for easy
maintenance
• Yoke with 10mm diameter hole, adjustable height, reversible and sliding
into extruded rails to balance accessories and for use in any position
• Accessory top covered by a door
• Heat insulated knobs and handles
• Quick tilt positioning with fast-locking levers
• Lamp-holder mounted onto an easily adjustable plate for 1000 to 1200
W lamps
• Focus adjustment by an endless screw mechanism operated by rear knob
AREA 12 FRESNEL
416
316
378
271,5
279
200
200
331
362
271,5
200
200
size mm.
Net weight Kg 6.6 - Gross weight Kg 7.7 - Box volume m3 0.042
size mm.
Net weight Kg 5 - Gross weight Kg 6.2 - Box volume m3 0.035
Code
Information for ordering accessories and different versions
• Vario 12 PC with safety net
• Area 12 Fresnel with safety net
VA 12
AR 12
Accessories
• Colour filter frame
• 4-door rotatable barndoors
• Safety bond
• Theatre C-hook in black painted steel for 30 to 50mm diameter tubes
• TV C-hook in die-cast aluminium (PIVOT DIN adaptor required)
• 29mm / M10 spigot adapter
• Aluminium clamp for 50mm diameter tubes
• Superclamp
• Colour changing scroller, DMX 512 or 0/10V controlled
TC S12
PL 4 S12
FUNE
GAC
A8
PIVOT DIN
HC / 500
CLAMP
on request
Options
• Clear lens for Vario 12 PC
• 100-120V lamp version
on request
on request
Lamps
Type / Order code
Power (W)
Lampholder
Light-centre/base lamp distance (mm)
Luminous flux (Lumen)
Life time (hours)
Colour temperature (°K)
Supply voltage (V)
Nominal current (Amp.)
Theatre (3050 °K)
T21
650
GX9.5
55
13000
900
3050
230
2.8
T19
1000
GX9.5
55
21500
750
3050
230
4.3
T29
1200
GX9.5
67
27600
480
3050
230
5.2
Film/TV (3200 °K)
CP 67
650
GX9.5
55
16500
400
3200
230
2.8
CP70
1000
GX9.5
55
25000
200
3200
230
4.3
CP90
1200
GX9.5
67
30000
240
3200
230
5.2
Plano-Convex (PC) and Fresnel
2000/2500W Halogen
Mod. Vario 25 - Area 25
Lux
23903
5976
2656
1494
956
0.35
0.70
1.05
1.40
1.75
5
10
15
20
25
Lux
880
220
98
55
35
Ø (m)
6.49
12.99
19.48
25.98
32.47
5
10
15
20
25
Ø (m)
SPOT 4°
Dist. (m)
FLOOD 66°
VARIO 25
A plano-convex luminaire with a
defined beam, variable from 4° to 66°
Barndoors optional
Dist. (m)
TESTED WITH LAMP CP91 2500W 230V
Lux
13124
3281
1458
820
525
0.61
1.22
1.83
2.45
3.06
5
10
15
20
25
Lux
1234
309
137
77
49
Ø (m)
6.37
12.74
19.11
25.48
31.85
5
10
15
20
25
Ø (m)
SPOT 7°
Dist. (m)
FLOOD 65°
AREA 25
A Fresnel luminaire with a soft-edged
beam, variable from 7° to 65°
Barndoors optional
Dist. (m)
TESTED WITH LAMP CP91 2500W 230V
Vario 25 PC
Area 25 Fresnel
Technical features
Electrical
•
•
•
•
Mechanical
Standard 230V, 50/60Hz power supply (others available on request)
Lamp-holder type G 22 (GY 16 optional)
2m power supply cable (plug available on request)
Strain relief cable clamp entry into light housing
• Die-cast extruded aluminium housing
• External black anti-scratch Epoxy Resin paint
• Black optical internal paint to give no light reflection and hightemperature resistance
• Labyrinth ventilation to avoid light spillage
Safety
• Automatic power cut-out by bipolar microswitch on opening the
lamp-tray
• Safety mesh
• Safety bond attachment
• Filter-frame locking system
• Compliance to CE EN 60598-2-17 standards
Optical
• Spherical reflector in 99.99% polished and treated aluminium; 150mm diameter
• 200mm diameter borosilicate lens mounted onto extended holders to
allow ventilation
VARIO 25 PC
Operational
• Lamp-tray hinged to the housing and completely removable for easy
maintenance
• Yoke with 10mm diameter hole, adjustable height, reversible and sliding
into extruded rails to balance accessories and for use in any position
• Accessory top covered by a door
• High insulated knobs and handles
• Quick tilt positioning with fast-locking levers
• Lamp-holder mounted onto an easily adjustable plate for 2000 to 2500
W lamps
• Focus adjustment by an endless screw mechanism operated by rear knob
AREA 25 FRESNEL
543
500
344
421
379
293
293
468
503
344
270
270
size mm.
Net weight Kg 13.1 - Gross weight Kg 15.1 - Box volume m3 0.087
size mm.
Net weigh Kg 10.1 - Gross weight Kg 12 - Box volume m3 0.072
Code
Information for ordering accessories and different versions
• Vario 25 PC with safety net
• Area 25 Fresnel with safety net
AR 25
Accessories
• Colour filter frame
• 4-door rotatable barndoors
• Safety bond
• Theatre C-hook in black painted steel for 30 to 50mm diameter tubes
• TV C-hook in die cast aluminium (PIVOT DIN adaptor required)
• 29mm / M10 spigot adapter
• Aluminium clamp for 50mm diameter tubes
• Superclamp
• Colour changing scroller, DMX 512 or 0/10V controlled
TC S25
PL 4 S25
FUNE
GAC
A8
PIVOT DIN
HC / 500
CLAMP
on request
Options
• Clear lens for Vario 25 PC
• 100-120V lamp version
• GY 16 lampholder version
on request
on request
on request
Lamps
Type / Order code
Power (W)
Lampholder
Light-centre/base lamp distance (mm)
Luminous flux (Lumen)
Life time (hours)
Colour temperature (°K)
Supply voltage (V)
Nominal current (Amp.)
Film/TV/Theatre (3200 °K)
CP75
2000
G22
75
52000
480
3200
230
8.6
CP92
2000
G22
90
52000
400
3200
230
8.6
CP91
2500
G22
90
65000
450
3200
230
10.8
CP72 on request
2000
GY16
70
50000
480
3200
230
8.6
Zoom profile spots
300/500/650W Halogen
Mod. Figura 05 ZS - Figura 05 ZW
Lux
Ø (m)
19431
4858
2159
1214
777
0.49
0.98
1.47
1.96
2.46
2
4
6
8
10
10650
2663
1183
666
426
1.18
2.37
3.55
4.74
5.92
2
4
6
8
10
NARROW 14°
BEAM
Dist. (m)
Lux
Ø (m)
WIDE
BEAM 33°
FIGURA 05 ZS
14° to 33° zoom variable profile spot
with shaping shutters and slots for
Iris/Gobo holder
Dist. (m)
TESTED WITH LAMP CP89 650W 230V
Lux
14504
3626
1612
907
580
0.81
1.63
2.44
3.26
4.07
2
4
6
8
10
Lux
8388
2097
932
524
336
Ø (m)
1.46
2.91
4.37
5.82
7.28
2
4
6
8
10
Ø (m)
NARROW 23°
BEAM
Dist. (m)
WIDE
BEAM 40°
FIGURA 05 ZW
23° to 40° zoom variable profile spot
with shaping shutters and slots for
Iris/Gobo holder
Dist. (m)
TESTED WITH LAMP CP89 650W 230V
Figura 05 ZS
Figura 05 ZW
Technical features
Electrical
Standard 230V, 50/60Hz power supply (others available on request)
Lamp-holder type GY 9.5
2m power supply cable (plug available on request)
Strain relief cable clamp entry into light housing
Safety
• Automatic power cut-out by bipolar microswitch on opening the lamptray
• Safety mesh (optional)
• Safety bond attachment
• Filter-frame locking system
• Compliance to CE EN 60598-2-17 standards
Optical
Independent lens zoom system 14°-33° and 23°-40° (ZW)
Ellipsoidal reflector in 99.99% polished and treated aluminium: 120mm diameter
18-leaf iris diaphragm (optional)
4 removable shaping shutters mounted between plates specially treated
with an anti-abrasive surface
• 90mm optical tempered glass internal lens
• 110mm optical glass internal lens
•
•
•
•
497
FIGURA 05 ZS
Mechanical
• Die-cast extruded aluminium housing
• External black anti-scratch Epoxy Resin paint
• Black optical internal paint to give no light reflection and hightemperature resistance
• Labyrinth ventilation to avoid light spillage
Operational
• M and B size gobo holder slots covered by a sliding door to prevent the
accessories from falling out and to avoid spill light
• Exclusively designed zoom and focusing system with fast locking levers
• Double sliding doors to access lenses for maintenance
• Lamp-tray hinged to the housing and completely removable for easy
maintenance
• Yoke with 10mm diameter hole, adjustable height, reversible and sliding
into extruded rails to balance accessories and for use in any position
• Accessory top covered by a door
• High thermal insulating knobs and handles
• Quick tilt positioning with fast locking levers
FIGURA 05 ZW
365
365
150
150
415
271,5
451
271,5
150
size mm.
Net weight Kg 4.8 - Gross weight Kg 5.7 - Box volume m3 0.038
362
150
•
•
•
•
size mm.
Net weight Kg 4.5 - Gross weight Kg 5.5 - Box volume m3 0.034
Code
Information for ordering accessories and different versions
• Figura 05 ZS (14°- 33°)
• Figura 05 ZW (23°- 40°)
FI 05 ZS
FI 05 ZW
Accessories
• Colour filter frame
• Safety mesh
• Safety bond
• Gobo-holder for M size gobos
• Gobo-holder for B size gobos
• Iris diaphragm
• Iris diaphragm with black-out
• Theatre C-hook in black painted steel for 30 to 50mm diameter tubes
• TV C-hook in die-cast aluminium (PIVOT DIN adaptor required)
• 29mm / M10 spigot adapter
• Aluminium clamp for 50mm diameter tubes
• Superclamp
• Colour changing scroller, DMX 512 or 0/10V controlled
TC S05
R S05
FUNE
PGM 100
PGB 100
DIA 05
DIA 05 BO
GAC
A8
PIVOT DIN
HC / 500
CLAMP
on request
Options
• 100-120V lamp version
on request
Lamps
Type / Order code
Power (W)
Lampholder
Light-centre/base lamp distance (mm)
Luminous flux (Lumen)
Life time (hours)
Colour temperature (°K)
Supply voltage (V)
Nominal current (Amp.)
Long life (2950 °K)
M 38
300
GY 9.5
46.5
5200
2000
2950
230
1.3
M 40
500
GY 9.5
46.5
10000
2000
2950
230
2.17
Theatre (3050 °K)
T 18
500
GY 9.5
46.5
11000
360
3050
230
2.17
T26
650
GY 9.5
46.5
14500
600
3050
230
2.8
Film/TV (3200 °K)
CP 81
300
GY 9.5
46.5
7800
180
3200
230
1.3
CP 82
500
GY 9.5
46.5
13500
180
3200
230
2.17
CP 89
650
GY 9.5
46.5
17500
180
3200
230
2.8
Zoom profile spots
1000/1200W Halogen
Mod. Figura 12 ZS - Figura 12 ZW
Lux
12530
3133
1392
783
501
0.91
1.82
2.73
3.65
4.56
4
8
12
16
20
Lux
4496
1124
500
281
180
Ø (m)
2.52
5.04
7.57
10.09
12.61
4
8
12
16
20
Ø (m)
NARROW 13°
BEAM
Dist. (m)
WIDE
BEAM 35°
FIGURA 12 ZS
13° to 35° zoom variable profile spot
with shaping shutters and slots for
Iris/Gobo holder
Dist. (m)
TESTED WITH LAMP CP90 1200W 230V
Lux
9233
2308
1026
577
369
1.70
3.40
5.10
6.80
8.50
4
8
12
16
20
Lux
2835
709
315
177
113
Ø (m)
3.73
7.46
11.19
14.92
18.65
4
8
12
16
20
Ø (m)
NARROW 24°
BEAM
Dist. (m)
WIDE
BEAM 50°
FIGURA 12 ZW
24° to 50° zoom variable profile spot
with shaping shutters and slots for
Iris/Gobo holder
Dist. (m)
TESTED WITH LAMP CP90 1200W 230V
Figura 12 ZS
Figura 12 ZW
Technical features
•
•
•
•
Electrical
Standard 230V, 50/60Hz power supply (others available on request)
Lamp-holder type GX 9.5
2m power supply cable (plug available on request)
Strain relief cable clamp entry into light housing
•
•
•
•
•
Safety
Automatic power cut-out by bipolar microswitch on opening the lamp-tray
Safety mesh (optional)
Safety bond attachment
Filter-frame locking system
Compliance to CE EN 60598-2-17 standards
Mechanical
• Die-cast extruded aluminium housing
• External black anti-scratch Epoxy Resin paint
• Black optical internal paint to give no light reflection and high-temperature
resistance
• Labyrinth ventilation to avoid light spillage
Optical
Independent lens zoom system 13°-35° (ZS) and 24°-50° (ZW)
Ellipsoidal reflector in 99.99% polished and treated aluminium: 150mm diameter
18-leaf iris diaphragm (optional)
4 removable shaping shutters mounted between plates specially treated
with an anti-abrasive surface
• 110mm optical tempered glass internal lens
• 150mm optical glass internal lens
•
•
•
•
726
FIGURA 12 ZS
FIGURA 12 ZW
687
538
393
272
200
200
578
200
272
393
Operational
• B size gobo holder slots covered by a sliding door to prevent the accessories
from falling out and to avoid spill light
• Exclusively designed zoom and focusing system with fast locking levers
• Double sliding door to access lenses for maintenance
• Lamp-tray hinged to the housing and completely removable for easy
maintenance
• Yoke with 10mm diameter hole, adjustable height, reversible and sliding
into extruded rails to balance accessories and for use in any position
• Accessory top covered by a door
• Heat insulated knobs and handles
• Quick tilt positioning with fast locking levers
• Peak/Even beam setting and fine adjustment of lamp-to-mirror position for
1000/1200W lamps
• Removable lantern and optics
200
size mm.
Net weight Kg 9.8 - Gross weight Kg 11.5 - Box volume m3 0.086
size mm.
Net weight Kg 9.1 - Gross weight Kg 10.7 - Box volume m3 0.070
Code
Information for ordering accessories and different versions
• Figura 12 ZS (13°-35°)
• Figura 12 ZW (24°- 50°)
FI 12 ZS
FI 12 ZW
Accessories
• Colour filter frame
• Safety mesh
• Safety bond
• Gobo-holder for B size gobos
• Iris diaphragm
• Iris diaphragm with black-out
• Theatre C-hook in black painted steel for 30 to 50mm diameter tubes
• TV C-hook in die-cast aluminium (PIVOT DIN adaptor required)
• 29mm / M10 spigot adapter
• Aluminium clamp for 50mm diameter tubes
• Superclamp
• Colour changing scroller, DMX 512 or 0/10V controlled
TC S12
R S12
FUNE
PGB 130
DIA 10
DIA 10 BO
GAC
A8
PIVOT DIN
HC / 500
CLAMP
on request
Options
• 100-120V lamp version
on request
Lamps
Type / Order code
Power (W)
Lampholder
Light-centre/base lamp distance (mm)
Luminous flux (Lumen)
Life time (hours)
Colour temperature (°K)
Supply voltage (V)
Nominal current (Amp.)
Theatre (3050 °K)
T21
650
GX9.5
55
13000
900
3050
230
2.8
T19
1000
GX9.5
55
21500
750
3050
230
4.3
T29
1200
GX9.5
67
27600
480
3050
230
5.2
Film/TV (3200 °K)
CP 67
650
GX9.5
55
16500
400
3200
230
2.8
CP70
1000
GX9.5
55
25000
200
3200
230
4.3
CP90
1200
GX9.5
67
30000
240
3200
230
5.2
CP63
1000
GX9.5
55
Reflector
180
3200
230
4.3
Zoom profile spots
2000/2500W Halogen
Mod. Figura 25 ZS - Figura 25 ZW
Lux
22152
5538
2461
1384
886
0.79
1.57
2.36
3.15
3.94
5
10
15
20
25
Lux
8028
2007
892
502
321
Ø (m)
2.22
4.43
6.65
8.87
11.08
5
10
15
20
25
Ø (m)
NARROW 9°
BEAM
Dist. (m)
WIDE
BEAM 25°
FIGURA 25 ZS
9° to 25° zoom variable profile spot
with shaping shutters and slots for
Iris/Gobo holder
Dist. (m)
TESTED WITH LAMP CP91 2500W 230V
Lux
16291
4073
1810
1018
652
1.49
2.99
4.48
5.98
7.47
5
10
15
20
25
Lux
4270
1068
474
267
171
Ø (m)
3.25
6.50
9.75
13.0
16.25
5
10
15
20
25
Ø (m)
NARROW 17°
BEAM
Dist. (m)
WIDE
BEAM 36°
FIGURA 25 ZW
17° to 36° zoom variable profile spot
with shaping shutters and slots for
Iris/Gobo holder
Dist. (m)
TESTED WITH LAMP CP91 2500W 230V
Figura 25 ZS
Figura 25 ZW
Technical features
Electrical
Standard 230V, 50/60Hz power supply (others available on request)
Lamp-holder type G 22 (GY 16 optional)
2m power supply cable (plug available on request)
Strain relief cable clamp entry into light housing
Safety
• Automatic power cut-out by bipolar microswitch on opening the lamptray
• Safety mesh (optional)
• Safety bond attachment
• Filter-frame locking system
• Compliance to CE EN 60598-2-17 standards
Optical
Independent lens zoom system 9°-25° (ZS) and 17°-36° (ZW)
Ellipsoidal reflector in 99.99% polished and treated aluminium: 190mm diameter
18-leaf iris diaphragm (optional)
4 removable shaping shutters mounted between plates specially treated
with an anti-abrasive surface
• 150mm optical tempered glass internal lens
• 230mm optical glass internal lens
•
•
•
•
FIGURA 25 ZS
Operational
• A size and B size gobo holder slots covered by a sliding door to prevent the
accessories from falling out and to avoid light spilling
• Exclusively designed zoom and focusing system with fast locking levers
• Double sliding door to access lenses for maintenance
• Lamp-tray hinged to the housing and totally removable for easy
maintenance
• Yoke with 10mm diameter hole, adjustable height, reversible and sliding
into extruded rails to balance accessories and for use in any position
• Accessory top covered by a door
• Heat insulated knobs and handles
• Quick tilt positioning with fast locking levers
• Peak/Even beam setting and fine adjustment of lamp-to-mirror position for
2000/2500W lamps
• Removable lantern and optics
FIGURA 25 ZW
1147
1105
294
270
800
758
356
564
356
564
Mechanical
• Die-cast extruded aluminium housing
• External black anti-scratch Epoxy Resin paint
• Black optical internal paint to give no light reflection and hightemperature resistance
• Labyrinth ventilation to avoid light spillage
294
•
•
•
•
270
size mm.
Net weigh Kg 25.1 - Gross weight Kg 30.4 - Box volume m3 0.230
size mm.
Net weigh Kg 21.3 - Gross weight Kg 27.8 - Box volume m3 0.230
Code
Information for ordering accessories and different versions
• Figura 25 ZS (9°-25°)
• Figura 25 ZW (17°-36°)
Accessories
• Colour filter frame
• Safety mesh
• Safety bond
• Gobo-holder for B size gobos
• Gobo-holder for A size gobos
• Iris diaphragm
• Iris diaphragm with black-out
• Theatre C-hook in black painted steel for 30 to 50mm diameter tubes
• TV C-hook in die-cast aluminium (PIVOT DIN adaptor required)
• 29mm / M10 spigot adaptor
• Aluminium clamp for 50mm diameter tubes
• Superclamp
• Colour changing scroller, DMX 512 or 0/10V controlled
Options
• 100-120V lamp version
• GY 16 lampholder version
Lamps
Type / Order code
Power (W)
Lampholder
Light-centre/base lamp distance (mm)
Luminous flux (Lumen)
Life time (hours)
Colour temperature (°K)
Supply voltage (V)
Nominal current (Amp.)
FI 25 ZS
FI 25 ZW
TC S25
R S25
FUNE
PGB 185
PGA 185
DIA 20
DIA 20 BO
GAC
A8
PIVOT DIN
HC / 500
CLAMP
on request
on request
on request
Theatre/Film/TV (3200 °K)
CP75
2000
G22
75
50000
480
3200
230
8.6
CP92
2000
G22
90
50000
400
3200
230
8.6
CP91
2500
G22
90
65000
450
3200
230
10.8
CP72 on request
2000
GY16
70
50000
480
3200
230
8.6
Spotlight reserve the right to change specification without prior notice
SI E - 010801
SPOTLIGHT
SRL
VIA SARDEGNA, 3
20098 S. GIULIANO MILANESE (MI)
PHONE +39.02.98.83.055
FAX +39.02.98.83.056
E-MAIL: SALES@SPOTLIGHT.IT
WEB: WWW.SPOTLIGHT.IT
Your Dealer
Teatro Alla Scala - Foto di A. Tamoni
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising