F-1300 Series Wide-Dispersion Speakers

F-1300 Series Wide-Dispersion Speakers
F-1300 Series
Wide-Dispersion Speakers
F-1300B/BT/BTWP
F-1300W/WT/WTWP
(without punched net)
DESCRIPTION
The TOA F-1300 Series comprise a two-way speaker line of compact units offering wide frequency response and higher, more
powerful performance. These highly adaptable speaker systems are intended to meet the requirements of a wide range of venues
and applications, both indoors and outdoors.
For clear, wide-area sound coverage, the Series include wide dispersion-angle (110° x 100°) high-frequency horn (Octagonal
Horn). High-impedance and low-impedance models are available. Low impedance models come with separate HF and LF
protection circuitry. High impedance models have a rear-panel rotary control for making impedance settings that optimally match
amplifier and speaker performance.
The speaker units have a design that combines stylishness and a high degree of performance-enhancing rigidity. Even the decorenhancing convex bulge on the side of the casing serves to improve rigidity. Brackets for easy speaker-stand, wall and ceiling
installation are included, and there are also optionally available brackets for more challenging installation venues and sound
reinforcement applications. Push-in terminals make connections quick and easy, and there are models for outdoor use that meet
IPX4 splash-proof standards.
FEATURES
• 110° x 100° dispersion angle high-frequency horns (Octagonal Horn) ensure an enhanced sound coverage area and a more even
balanced tone.
• Splash-proof design with anticorrosive punching net and terminal cover, meeting IPX4 splash-proof ratings, available on models
F-1300BTWP/WTWP.
• All speaker models are repaintable.
• Low impedance models have high and low frequency filter and protection circuitry.
• Included accessory brackets allow a wide choice of installations on walls, ceilings and speaker stands.
• Optionally available brackets meet an even wider variety of installation demands.
• Stylish and highly rigid casing design for attractive installation with clearer sound reproduction.
• Sensitivity: 90dB (1W, 1m)
TOA Corporation F-1300 1/4
APPEARANCE AND DIMENSIONAL DIAGRAM
TERMINAL COVER USE (F-1000BTWP/WTWP only)
4–M5 (depth 14 (0.55"))
(for bracket mounting)
Input terminal
Tapping screw 4 x 12 (accessory)
30 (1.18")
161 (6.34")
162 (6.38")
76.2 (3")
250 (9.84")
30 (1.18")
Terminal cover (accessory)
Speaker cable
.18")
30 (1
Front View
Side View
* Screwed onto the Terminal cover at the factory.
Rotally switch
(F-1300BT/WT/
BTWP/WTWP only)
Rear View
2–M5 (depth 14 (0.55"))*
(for bracket mounting)
30mm
Notes
• For the speaker cable, use a cable with a diameter of 6 – 10 mm, which will fit the cable
bushing.
• To ensure waterproof capabilities, firmly mount the terminal cover to the speaker and
tighten the bushing on the cover.
*Hole plugs are pre-fitted into
the holes at the factory.
Before attaching the speaker
mounting bracket to this side,
remove them using a pointed
tool.
Bottom View
[Stripped conductor]
10mm
Bushing*
.5")
38 (1
unit: mm
WALL BRACKET AND JOINT BRACKET MOUNTING
Vertical installation
Horizontal: Max. 75°,
Vertical: Max. 45° downward
Horizontal installation
Horizontal: Max. 49°,
Vertical: Max. 45° downward
Joint bracket mounting
Hexagon bolt M6 x 12
(with plain washer
and spring washer)
Wall bracket
4-ø6mm
25mm
Wall bracket mounting
Horizontal speaker
mounting (indoor
installation only)
Joint bracket
Joint bracket
30mm
Ceiling
mounting
Fixing bolt
M5 x 60
Fixing bolt M5 x 60
Speaker bracket
30mm
4-ø6m
30mm
SPECIFICATIONS
Model No.
Enclosure Type
Power Handling Capacity
F-1300B
Rated Input
Rated Impedance
30 W
100V line: 330Ω (30W), 1 kΩ (10W), 3.3 kΩ (3W), 10 kΩ (1W)
70V line: 170Ω (30W), 330Ω (15W), 1 kΩ (5W), 3.3 kΩ (1.5W), 10 kΩ (0.5W)
90 dB (1W, 1m) at installation in 1/2 free sound field
80 – 20,000 Hz, -10 dB at installation in 1/2 free sound field
2 kHz
Horizontal: 110°, Vertical: 100°
Low frequency: 13 cm (5") cone-type
High frequency: 25 mm (1'') dome tweeter
Push-in terminal
—
IPX4
—
–10°C to +50°C (14°F to 122°F)
Enclosure: HIPS resin, black
Enclosure: HIPS resin, white
Enclosure: HIPS resin, black
Enclosure: HIPS resin, white
Enclosure: HIPS resin, black
Enclosure: HIPS resin, white
Punched net: Surface-treated
Punched net: Surface-treated
Punched net: Surface-treated
Punched net: Surface-treated
Punched net: Surface-treated
Punched net: Surface-treated
steel plate, black, paint
steel plate, white, paint
steel plate, black, paint
steel plate, white, paint
steel plate, black, anticorrosive paint steel plate, white, anticorrosive paint
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Steel plate, t1.6, black, paint
Steel plate, t1.6, white paint
Steel plate, t1.6, black, paint
Steel plate, t1.6, white, paint
Stainless steel, t1.5
Stainless steel, t1.5
Speaker bracket: Die-cast
Speaker bracket: Die-cast
Speaker bracket: Die-cast
Speaker bracket: Die-cast
Speaker bracket: Die-cast
Speaker bracket: Die-cast
aluminum, black, paint
aluminum, white, paint
aluminum, black, paint
aluminum, white, paint
aluminum, black, paint
aluminum, white, paint
162 (W) × 250 (H) × 161 (D) mm (6.38" × 9.84" × 6.34")
3.1 kg (6.83 lb) (including the supplied brackets)
3.6 kg (7.94 lb) (including the supplied brackets)
Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Fixing bolt M5 x 60 × 1,
Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Fixing bolt M5 x 60 × 1,
Hexagon bolt M6 × 12 (with plain washer and spring washer) × 2,
Hexagon bolt M6 × 12 (with plain washer and spring washer) × 2,
Machine screw M5 × 20 (with plain washer and spring washer) × 2
Machine screw M5 × 20 (with plain washer and spring washer) × 2,
Terminal cover × 1, Tapping screw 4 x 12 × 4
Board hanger bracket: HY-BH10B Board hanger bracket: HY-BH10B Board hanger bracket: HY-BH10B Board hanger bracket: HY-BH10B
Speaker mount bracket: YS-60B
Ceiling mount bracket: HY-CM10B Ceiling mount bracket: HY-CM10W Ceiling mount bracket: HY-CM10B Ceiling mount bracket: HY-CM10W
Cluster bracket: HY-CL10B
Cluster bracket: HY-CL10B
Cluster bracket: HY-CL10B
Cluster bracket: HY-CL10B
Speaker stand: ST-16A
Speaker stand: ST-16A
Speaker stand: ST-16A
Speaker stand: ST-16A
FB-100, FB-120B/120W (indoor use only)
Sensitivity
Frequency Response
Crossover Frequency
Directivity Angle
Speaker Component
Input Terminal
Water Protection
Operating Temperature
Finish
Dimensions
Weight
Accessories
Option
Recommended Subwoofer
F-1300W
50 W (continuous pink noise)
150 W (continuous program)
—
8Ω
F-1300BT
Bass-reflex type
F-1300WT
F-1300BTWP*
F-1300WTWP*
—
* Note: Avoid installing the speaker in locations close to the seashore or in indoor swimming facilities.
TOA Corporation F-1300 2/4
CHARACTERISTIC DIAGRAMS
Polar Response
0
60°
30°
300°
60°
-20
-40
270°
90°
270°
-40
-40
-30
-30
-30
240°
-20
120°
-10
0
0
240°
150°
500Hz
400Hz
315Hz
0
240°
-20
120°
10
180°
330°
30°
150°
30°
60°
0
30°
300°
60°
-40
270°
90°
-40
-40
-30
-30
-30
240°
-20
120°
30°
150°
500Hz
400Hz
315Hz
0
-20
120°
240°
10
180°
330°
30°
60°
0
150°
330°
0
30°
-30
-30
-30
-30
-40
-40
-40
-40
270°
90°
270°
90°
-40
-30
-30
-20
240°
-20
120°
0
10
180°
240°
240°
240°
10
180°
4000Hz
3150Hz
2500Hz
150°
240°
10
180°
8000Hz
6300Hz
5000Hz
SPL vs. Frequency
0
150°
16000Hz
12500Hz
10000Hz
240°
240°
-20
120°
-10
-10
0
0
0
240°
10
180°
150°
150°
240°
10
180°
4000Hz
3150Hz
2500Hz
240°
240°
10
180°
8000Hz
6300Hz
5000Hz
16000Hz
12500Hz
10000Hz
Beamwidth vs. Frequency
180
100
-30
-20
120°
-10
Phase vs. Frequency
110
-40
-30
-20
120°
270°
90°
-40
-30
240°
-10
0
150°
270°
90°
-40
-20
120°
-10
-10
270°
90°
-40
300°
-20
-40
270°
330°
0
-10
60°
300°
-20
-30
-30
2000Hz
1600Hz
1250Hz
0°
10
-40
-40
240°
10
180°
1000Hz
800Hz
630Hz
-10
300°
-20
240°
-10
0
0°
10
-10
60°
240°
-10
240°
10
180°
300°
270°
90°
-40
0
300°
-20
-30
0°
10
330°
-20
60°
-40
-10
2000Hz
1600Hz
1250Hz
300°
-20
-30
-20
150°
330°
0
-10
-40
270°
120°
30°
-30
90°
240°
0°
10
330°
0
-10
-20
-10
300°
-20
0°
10
330°
-30
90°
80
70
200
0
-90
60
-180
20
50
50
100
500
1k
Frequency (Hz)
5k
10k
20k
Beamwidth (deg)
Phase (deg)
90
90
SPL (dB)
60°
0°
10
330°
0
60°
0
-10
240°
0
10
180°
1000Hz
800Hz
630Hz
-10
300°
-20
0°
10
30°
-10
240°
0°
10
-10
300°
90°
-40
-10
330°
-20
-30
10
180°
150°
60°
-40
0°
10
120°
300°
-30
-20
30°
0
-10
-40
270°
60°
30°
-30
90°
150°
330°
0
-10
-20
120°
0°
10
0°
10
330°
-10
vertical
horizontal
0°
10
30°
100
50
40
30
20
50
100
500
1k
5k
10k
20k
Impedance vs. Frequency
10
200
Frequency (Hz)
Impedance (ohm)
20
50
100
500
1k
Frequency (Hz)
100
50
5k
10k
20k
Hor.
Ver.
10
5
1
20
50
100
500
1k
Frequency (Hz)
5k
10k
20k
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS
F-1300B / F-1300W
F-1300BT / F-1300WT
F-1300BTWP / F-1300WTWP
The speaker shall be a two-way bass reflex enclosure
suitable for ceiling or wall mounting. The low frequency
component shall be a 13 cm (5") cone-type woofer. The
high frequency component shall be a 25 mm (1") dome
tweeter. For clear, wide-area sound coverage, the
speaker shall be 110° (H) × 100° (V) wide dispersionangle high frequency horn.
The speaker shall come with separate HF and LF
protection circuitry.
The speaker shall be rated at 8 ohms. The sensitivity at
a distance of 1m with a 1W input level applied shall be
90 dB. The rated power handling shall be 50 W
continuous pink noise and 150 W continuous program.
The speaker shall have a frequency response of 80 to
20 kHz.
The speaker enclosure shall be constructed of HIPS
resin. The speaker shall be available in white or black,
and also be repaintable. The grille shall be a surfacetreated steel plate. Brackets for speaker stand, wall
and ceiling installation shall be included. There shall
be also optionally available brackets for more
demanding installations.
The unit shall be compact and lightweight with
dimensions of 162 × 250 × 161 mm (6.38" × 9.84" ×
6.34") and a weight of 3.1 kg (6.83 lbs).
The speaker shall be a TOA model F-1300B/F-1300W.
The board hanger bracket shall be the HY-BH10B.
The ceiling mount bracket shall be the HY-CM10B/
HY-CM10W.
The cluster bracket shall be the HY-CL10B.
The subwoofer shall be the FB-100 or FB-120B/120W.
The speaker shall be a two-way bass reflex enclosure
suitable for ceiling or wall mounting. The low frequency
component shall be a 13 cm (5") cone-type woofer. The
high frequency component shall be a 25 mm (1") dome
tweeter. For clear, wide-area sound coverage, the
speaker shall be 110° (H) × 100° (V) wide dispersionangle high frequency horn.
The rated input shall be 30 W. The speaker shall
include a transformer having multiple taps (1 W, 3 W,
10 W, 30 W at 100 V and 0.5 W, 1.5 W, 5 W, 15 W, 30 W
at 70 V) adjustable via the rear of the enclosure. The
sensitivity at a distance of 1 m with 1 W of input level
applied shall be 90 dB. The speaker shall have a
frequency response from 80 to 20k Hz.
The speaker enclosure shall be constructed of HIPS
resin. The speaker shall be available in white or black,
and also be repaintable. The grille shall be a surfacetreated steel plate. Brackets for speaker stand, wall
and ceiling installation shall be included. There shall
be also optionally available brackets for more
demanding installations.
The unit shall be compact and lightweight with
dimensions of 162 × 250 × 161 mm (6.38" × 9.84" ×
6.34") and a weight of 3.6 kg (7.94 lb).
The speaker shall be a TOA model F-1300BT/
F-1300WT.
The board hanger bracket shall be the HY-BH10B.
The ceiling mount bracket shall be the HY-CM10B/
HY-CM10W.
The cluster bracket shall be the HY-CL10B.
The subwoofer shall be the FB-100 or FB-120B/120W.
The speaker shall be a two-way bass reflex enclosure
suitable for ceiling or wall mounting. The low frequency
component shall be a 13 cm (5") cone-type woofer. The
high frequency component shall be a 25 mm (1") dome
tweeter. For clear, wide-area sound coverage, the
speaker shall be 110° (H) × 100° (V) wide dispersionangle high frequency horn.
The rated input shall be 30 W. The speaker shall
include a transformer having multiple taps (1 W, 3 W,
10 W, 30 W at 100 V and 0.5 W, 1.5 W, 5 W, 15 W, 30 W
at 70 V) adjustable via the rear of the enclosure. The
sensitivity at a distance of 1 m with 1 W of input level
applied shall be 90 dB. The speaker shall have a
frequency response from 80 to 20k Hz.
The speaker enclosure shall be constructed of HIPS
resin. The speaker shall have a IEC 529 splash-proof
rating of IPX4. The speaker shall have an operating
temperature of -10° C to +50° C (14° F to 122° F). The
speaker shall be available in white or black, and also
be repaintable. The grille shall be a punched net,
surface-treated steel plate with anticorrosive paint.
Brackets for speaker stand, wall and ceiling installation
shall be included.
There shall be also optionally available pole mount
bracket. The unit shall be compact and lightweight with
dimensions of 162 × 250 × 161 mm (6.38" × 9.84" ×
6.34") and a weight of 3.6 kg (7.94 lbs).
The speaker shall be a TOA model F-1300BTWP/
F-1300WTWP.
The pole mount bracket shall be the YS-60B.
TOA Corporation F-1300 3/4
OPTIONAL BRACKETS
CEILING MOUNT BRACKET
CLUSTER BRACKET
for indoor use
for indoor use
HY-CM10B/W
HY-CL10B
• Finish:
Steel plate, black, paint (HY-CM10W: white, paint)
• Dimensions: 48 (W) × 100 (H) × 108 (D)mm (1.89" × 3.94" × 4.25")
• Weight:
210g (0.46 lb)
• Finish:
Steel plate, black, paint
• Dimensions: 109.3 (W) × 39 (H) × 109.3 (D)mm (4.3" × 1.54" × 4.3")
• Weight:
380g (0.84 lb)
Top View
9.8 X 41.8
(0.39" X 1.65")
.25")
6.4 (0
30°
15°
68 (2.68")
109 (4.3")
45 (1.77")
ø70 (ø2.76")
108 (4.25")
48 (1.89")
109 (4.3")
Front View
4–M5
25
(0.98")
39
(1.54")
25
(0.98")
16–M5
20 (0.79")
ø9.8 (ø0.39")
8–ø5.8 (ø0.23")
(suspension hole)
ø9.8 (ø0.39")
100 (3.94")
Top View
Side View
3 (0.12")
68 (2.68")
30
(1.18")
30
(1.18")
Front View
BOARD HANGER BRACKET
POLE MOUNT BRACKET
for indoor use
HY-BH10B
ø4 (ø0.16")*
(sliding bracket
fixing screw)
51 (2.01")
48.6 (1.91")
A'
11 (0.43")
1.2 (0.05")
25 (0.98")
14 (0.55")
17
(0.67")
A
19
(0.75")
22
(0.87")
1.2 (0.05")
[Knob bolt]
10
(0.39")
3 (0.12")
100 (3.94")
20 (0.79")
25 (0.98")
Top View
40 (1.57")
2–M8
12 (0.47")
25 (0.98")
A – A'
ø9.8 (ø0.39")
Front View
Side View
[Hanger bracket]
5 (0.2")
48 (1.89")
30 (1.18")
Front View
4–M5
34.2 (1.35")
1200 (47.24")
30
(1.18")
Side View
110 (4
.33")
60 (2.3
6")
37
(1.46
")
32 (1.26") 29 (1.14")
108 (4.25")
48 (1.89")
Applicable Pole:
Approx. ø90 (ø3.5") to ø340 (ø13.4") mm
Finish:
Electroless zinc-plated
Weight:
360g (0.79lb.) (per band)
Product Composition: Mounting band x 2
31 (1
.22")
Top View
•
•
•
•
M10
.97")
(ø1
ø50
YS-60B
15 (0.59")
9.8 (0.39")
• Finish:
Steel plate, black, paint
• Dimensions: 48 (W) × 100 (H) × 108 (D)mm (1.89" × 3.94" × 4.25")
(excluding knob bolt)
• Weight:
210g (0.46 lb)
[Sliding bracket]
* When protection against falls is required:
Fix the sliding bracket directly to the partition
board using screws. Note the at the fixing screws
are not supplied.
TOA Corporation
www.toa.jp
Specifications are subject to change without notice.
833-61-658-20 u
TOA Corporation F-1300 4/4
Dovoz, distribuce a prodej v ČR:
AUDIO DIGITAL s.r.o.
www.audiodigital.cz
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising