mounting alternatives — flood/area

mounting alternatives — flood/area
MOUNTING
ALTERNATIVES
MOUNTING ALTERNATIVES — FLOOD/AREA
SPEC #
CATALOG #
DESCRIPTION
CA-1
MNB-1
MNB-2
Cross-Arm Adaptor
Mounting Box
Mounting Box with
Stake, Cord & Plug
Conduit Slipfitter
Ground Mount Post
MNH-2
PGM-1
SPEC #
CATALOG #
DESCRIPTION
SPEC #
6" Arm for 16 or 22" Housing
PT-11
1 Fixture
PT-12(90)
90° Twin
PT-12(180)
180° Twin
PT-13(90)
90° Triple
PT-13(120)
120° Triple
PT-14
90° Quad
CATALOG #
DESCRIPTION
12" Arm for 16 or 22" Housing
PT-61
1 Fixture
PT-62(90)
90° Twin
PT-62(180)
180° Twin
PT-63(90)
90° Triple
PT-63(120)
120° Triple
PT-64(90)
90° Quad
12" Arm for Side Pole Mount
PM-2/12-12
For 12" sq. & 16" Wedge
PM-2/16-12
For 16" sq., 22" Wedge,
Square Dome
PM-2/22-12
For 22" sq.
NOTE: PT-12(90), PT-13(90) and PT-14(90) can not be used with
22" housing
6" Arm for 12" or Rectangular Housing
PT-21
1 Fixture
PT-22(90)
90° Twin
PT-22(180)
180° Twin
PT-24(90)
90° Quad
CA-1 CROSS-ARM ADAPTOR
MNH-2 CONDUIT SLIPFITTER
Attaches a fixture with yoke mount bracket to any horizontal mounting
surface, such as a wood cross arm or a parapet. Supplied with three 3/8" x
3/4" long stainless-steel screws to mount the bracket to the yoke mount.
Use 1/2" bolt or screw to attach to mounting surface. Base is marked to
rotate fixture in 10° increments. Colorfast DeltaGuard™ finish supplied
with medium bronze, ultra-durable powder topcoat.
Cast aluminum hub provides a threaded entry for the 1/2" adjustable
fitter, and slips over a 2-3/8" (60 mm) O.D. pipe or tenon. A 3/8" allenhead set screw is provided to secure the slipfitter. Colorfast DeltaGuard
finish supplied with medium bronze, ultra-durable powder topcoat.
W
L
30
Dimensions:
W = 4.3" (108 mm)
L = 2.7" (68 mm)
D = 4.3" (108
mm)
15
0
15
30
45
60
75
90
D
PGM-1 GROUND MOUNT POST
Use with 2" Adjustable Fitter for ground mounted floodlight fixtures.
Wiring or conduit feeds through post base.
MNB-1 MOUNTING BOX
Dimensions:
Overall: 24"H (610 mm)
Tube: 18"H x 2.4"D (457 x 60 mm)
Base: 4.9"W x 6.3"L (124 x 159 mm)
Cast aluminum box provides an enclosed wiring chamber to mount a
fixture with the 1/2" adjustable fitter. Four threaded knockouts are provided
for 1/2" conduit entry, one on the top, back and on either side. Supplied
with a gasket at the cover to ensure a watertight seal. Three screws are
provided to secure the cover, and a ground screw is provided inside
the box. Colorfast DeltaGuard finish supplied with medium bronze,
ultra-durable powder topcoat.
Dimensions:
L = 2.5" (64 mm)
W = 3.8" (95 mm)
D = 2.5" (64 mm)
PT* TENON ADAPTOR
MNB-2 MOUNTING BOX WITH STAKE, CORD & PLUG
The Tenon Adaptor supports single or multiple outdoor fixtures using a
6.1" (155 mm) or 12.1" (308 mm) long horizontal arm. This arm mounts
to a round hub that slip-fits over a tenon or pole ranging in size from 23/8" to 3" O.D. The cast aluminum hub is provided with eight allen set
screws. Order the fixture “without arm” (mounting code “8”) and specify
the Tenon Adaptor configuration according to description.
Same construction as the MNB-1 Mounting Box, but with a 6.5" (165 mm)
long aluminum stake for ground mounting. A gasketed, 10' (3 m) cord is
supplied with a 120V straight blade plug. Colorfast DeltaGuard finish
supplied with medium bronze, ultra-durable powder topcoat.
Dimensions:
L = 2.5" (64 mm)
W = 3.8" (95 mm)
D = 2.5" (64 mm)
Stake Dimension:
6.5" (165 mm) long
9201 Washington Avenue Racine, Wisconsin 53406-3772 USA
© Ruud Lighting Inc.
Printed in USA
TENON ADAPTOR PHOTOCELL
A factory-installed photocell option is available (not available with the PT-14
or PT-64 Tenon Adaptor, or for fixtures with 480V ballast or 1000W-120V
ballast). Add the suffix “P” to Tenon Adaptor catalog number and specify
fixture voltage (27, 1, 2, 3, 4 or 6) at time of order.
PHONE (262) 886-1900
www.ruudlighting.com
FAX (262) 884-3309
08/10/06
MOUNTING
ALTERNATIVES
SPEC #
MOUNTING ALTERNATIVES — FLOOD/AREA
CATALOG #
DESCRIPTION
PW-1A3(a)
Mid-Pole Bracket for one
fixture
Mid-Pole Bracket for two
fixtures
PW-2A3(a)
SPEC #
CATALOG #
DESCRIPTION
PWY-1
Wood Pole Mounting
Bracket
Wall Mount Bracket
Mounting Bracket
Wall Mount Plate
“Elbow” Wall Mount
Bracket
WM-1
WM-2
WM-3
WM-4
Specify (a) Pole Size.
(a) POLE SIZE
3
4
5
6
3" Pole
4" Pole
5" Pole
6" Pole
PW-1A3(a), PW-2A3(a) MID-POLE BRACKET
WM-2 MOUNTING BRACKET
Allows mounting of a fixture with 2" adjustable fitter to the side of a square
pole. 3" (76 mm) square structural tubing is welded to steel mounting plate.
Secures to pole with 1/2" black stainless-steel bolts. Provides a 2-3/8" (60 mm)
O.D. tenon for mounting of fixture. A friction fit steel end cap is provided to
enclose wiring chamber. Specify configuration as follows: PW-1A3(a) for one
bracket, PW-2A3(a) for two brackets mounted on either side of pole, 180° to
each other. Colorfast DeltaGuard™ finish supplied with medium bronze, ultradurable powder topcoat. (Specify (a) pole size — 3", 4", 5", or 6")
0.25" (6 mm) thick steel backplate provides wiring access. Built-in
2-3/8" (60 mm) O.D. steel tenon for mounting fixtures with adjustable fitter
to ground, rooftop, wall or to the side of a wood pole. Colorfast DeltaGuard
finish supplied with medium bronze, ultra-durable powder topcoat.
Dimensions:
A = 3.8" (95 mm)
B = 3.0" (76 mm)
C = 6.5" (165 mm)
Dimensions:
A = 3.8" (95 mm)
B=
4" (102 mm)
C = 3.3" (83 mm)
D = 0.406 (10 mm)
D = 9" (229 mm)
E = 3.0" (76 mm)
F = 11" (280 mm)
C
A
B
B
A
D
C
E
WM-3 WALL MOUNT BRACKET
D
F
PWY-1 WOOD POLE MOUNTING BRACKET
Structural steel bracket attaches to yoke mount with supplied hardware and
to pole with 5/8" thru bolt or threaded rod (supplied by others). 6 to 12"
(152 to 305 mm) diameter round wood poles.
Dimensions:
A = 5" (127 mm)
B = 3.5" (89 mm)
C = 1.75" (44 mm)
0.25" (6 mm) thick aluminum plate. Used for mounting a fixture with direct
mount arm to a wall or wood pole. Wiring access provided. When using
WM-3 with Fixed 20° Mount, consult factory. We recommend 3/8"
fasteners to mount bracket to wall. Colorfast DeltaGuard finish supplied
with medium bronze, ultra-durable powder topcoat.
Dimensions:
4.8" (121 mm) x 0.25" (6 mm) thick
C
B
A
WM-4 “ELBOW” WALL MOUNT BRACKET
WM-1 WALL MOUNT BRACKET
Cast aluminum bracket allows mounting of fixtures with 2" adjustable fitter
to wall or the side of a wood pole. Provides four threaded and closed 1/2"
conduit entries for areas where surface wiring is required, and a built-in
2-3/8" (60 mm) O.D. tenon to mount outdoor fixtures with adjustable fitter.
Colorfast DeltaGuard finish supplied with medium bronze, ultra-durable
powder topcoat.
Dimensions:
A = 3.5" (89 mm)
B = 3.0" (76 mm)
C=
4" (102 mm)
0.25" (6 mm) thick steel backplate provides wiring access. Built-in
2-3/8" (60 mm) O.D. elbow tenon for mounting fixtures with adjustable
fitter to wall or to the side of a wood pole. Colorfast DeltaGuard finish
supplied with medium bronze, ultra-durable powder topcoat.
Dimensions:
A = 8" (203 mm)
B=
4" (102 mm)
C = 3.3" (83 mm)
D = ø0.406 (10 mm)
A
C
B
C
A
D
B
9201 Washington Avenue Racine, Wisconsin 53406-3772 USA
© Ruud Lighting Inc.
Printed in USA
PHONE (262) 886-1900
www.ruudlighting.com
FAX (262) 884-3309
08/10/06
MOUNTING ALTERNATIVES — FLOOD/AREA
SPEC #
CATALOG #
DESCRIPTION
WM-5
Wall Mount Box
MOUNTING
ALTERNATIVES
WM-5 WALL MOUNT BOX
The hinge feature on the fixture mounting plate allows for hands-free
suspension of the fixture for easy access to wiring then swings down
and secures in place with one fastener. Includes specially designed
wall mount plate for easy installation and through wiring. Intended for
installation over junction boxes up to and including four-inch square or
octagonal and single-gang J boxes. Knockouts are available at top, sides
and rear to feed 1/2" rigid conduit or EMT. Gasketing at mounting provides
a watertight seal. Use with any Area Light up to and including 400-watt.
Dimensions:
W = 8.25" (210 mm)
L = 8.25" (210 mm)
D = 2.5" (64 mm)
9201 Washington Avenue Racine, Wisconsin 53406-3772 USA
© Ruud Lighting Inc.
Printed in USA
PHONE (262) 886-1900
www.ruudlighting.com
FAX (262) 884-3309
08/10/06
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising