MAC-16 port GigE switch
MAC-16 port
GigE switch
MAC-16 port GigE Switch
Product ID : MAC-16 port GigE switch
Version : 2.0
Key Benefits:
MAC-16 port GigE switch is the 16-port
AdvancedTCA fabric layer 2+ switch card, based
on Marvell Prestera MV98DX166 switch
and
Freescale
The
MPC852T
I/O
processor.
ATCA GigE fabric switch card, features 16-port
•
SGMII and one 10/100/1000 MII port .
•
•
SerDes can drive backplane directly and supports
PICMG 3.1 standards .
ports, 1 inter-switch port and 1 control plane
CPU access port and 2X1Gigabit Ethernet SFP
Full-wire speed switching capacity of up to 25.3
million packets/second .
10/100/1000BASE-T links, including 12 node
slots, 1 front panel egress RJ45 port, 2 MCM
16 10/100/1000 Base-X ports configured in SerDes/
•
Manual or Auto-Negotiation support Link,Duplex
and IEEE 802.3x Flow control setting.
up-link port . The 16-Port GigE Switch is Linuxbased operating system runs on Freescale I/O
16 port GigE switch Features:
Processor providing a complete development
platform for the management of Layer 2+
packet switching plus sophisticated standards
such as, IEEE 802.1d Spanning Tree Protocol
STP), IEEE 802.1p Quality-of-Service (QoS),
IEEE 802.1Q 4096 VLANs and QinQ support,
IEEE
802.3ad
Link
aggregation,
Port
Mirroring and DHCP services .
MCM(Chassis Management Port) :
This card supports Dual Chassis management
access Ports and provides access through the
Base Interface .An external Chassis manager can
access all cards on the base interface for
configurations,software updates,and status.
•
16 ports Gigabit Ethernet Fabric interface switch .
•
12 Node ports .
•
1 Egress port .
•
2 MCM ports, PICMG 3.0 R2.0 ECN001 .
•
1 Inter-Switch port and 1 Control Plane port .
•
2X1-Gigabit Ethernet SFP Up-link ports .
•
Line rate layer 2 switching engine ,IEEE802.1D/Q Compliant Ethernet switch .
•
Front panel GbE management port and serial console
•
IEEE 802.1x service VLAN'S,Stacked VLAN.
•
Network management using :

web GUI

CLI console

SNMPv2

Telnet

Port mirroring
MAC-16 port GigE Switch
ATCA-16 port GigE switch card view
MAC-16 port GigE Switch
Operating system
Specification:
•
Control plane
•
Freescale MPC852T 32 bit I/O Processor .
•
Memory: 512Mbx2 SDRAM,8MB/16MB
flash .
•
32 bit/66 MHz processor local bus.
Hardware Specification
•
Form Factor: PICMG3.0 R2.0 ECN001 ATCA
•
10/100/1000 Base-T Redundancy Ethernet
Management
port
•
Front panel 10/100 Base-T (RJ45) Debug
port.
•
Front panel 10/100 Base-T (RJ45) MCM
access .
•
Front panel RS232 serial console switch
access.
•
Front panel RS232 serial console MCM
access .
•
Applications:
•
Next Generation Networks.
•
Computation cluster Interconnects.
•
Storage area networks.
•
Building blocks for metro Ethernet networks.
•
IPTV multi cast applications .
On board RS232 serial console IPMC
access.
Operating Environment
Data plane
•
Switch fabric Marvell Prestera 98DX166 .
•
Broadcom dual port PHY.
•
•
12x10/100/1000 Base-T fabric interface
Storage Temperature Range - -40 deg C to +70
2x10/100 Base-TX MCM ports compliant
Power consumption:
1x10/100/1000 Base-T inter-switch link .
1+1 Gigabit Ethernet up-link
•
•
deg C (-40 deg F to +158 deg F).
to PICMG 3.0 R2.0 ECN001 .
•
Operating Humidity - 5% to 90% relative
humidity non-condensing
channels for 14 slot system .
•
Operating Temperature Range – 5 deg C to 45
deg C (41 deg F to 113 deg F)
PICMG 3.0 Interfaces
•
Linux
2x1 Gigabit Ethernet SFP optical
30W
Operating voltages:
-48V DC
( Derived Voltages: 1.2V, 1.8V ,2.5V and 3.3V)
transceiver.
#17/A, Electronics City, Hosur Road, Bangalore-560100, India
Ph: +9180 28520371 Fax: +9180 28520822 E-mail: macil@macil.in
Web: http://www.macil.in
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising