Prism : 0x0 4x4 8x8 12x12 16x16

Prism : 0x0 4x4 8x8 12x12 16x16
Prism Data Sheets
Prism : 0x0 4x4 8x8 12x12 16x16
Copyright 2017, Symetrix, Inc. All Rights Reserved. All specifications and features subject to change without notice.
www.symetrix.co | T +1.425.778.7728
1 of 12
Prism Data Sheets
Prism 0x0, 4x4, 8x8, 12x12 and 16x16 DSPs provide sophisticated state of the art audio signal processing at
price points that were unimaginable only a few short years ago. The same uncompromising analog and digital
design found in the Symetrix top of the line DSPs is now available across the Prism family.
Dante™ in our DNA.
All Prism models are equipped with 64x64 Dante channels. Dante is an uncompressed multi-channel digital media technology. Symetrix designs and supports one, and only one, network audio protocol: Audinate’s Dante. Symetrix and Dante provide the fastest way to implement, control and maintain a system of networked DSPs and accessories - including select third-party products.
Scale up.
Increase a Prism systems analog input and output count using Symetrix Dante-enabled xIn 4, xIO 4x4, xOut 4, xIn 12, and xOut 12 expanders.
Total design control.
Program Prism using Symetrix’ award winning Composer open-architecture Windows CAD application.
Connect to the outside world.
Dante, Ethernet and ARC ports are standard issue. Connect to Dante enabled hardware, Ethernet equipped touch panels and computers, and any of the Symetrix ARC wall panels including the ARC-3 with graphical menus and universal mounting options.
Form, fit and function.
Prism 8x8, 12x12 and 16x16 models are 19” x 1U. Prism 0x0 and 4x4 are 1/2 rack x 1U. (Surface and rack mount kits sold separately).
An embedded web server for status and control.
Prism’s embedded web server displays analog I/O levels, diagnostics, and provides access to ARC-WEB, a browser interface accessible from any smart phone, tablet or computer. The embedded server is accessible using any popular web browser by entering Prism’s local LAN, or publicly accessible IP address or its fully qualified domain name into the browser’s address field.
Installed Sound DSP Quick Comparison
Control
Inputs
Logic
Outputs
Design
Software
Dante
RS-232
10/100
Base-T
Ethernet
Ports
Yes
8 Closures
4 Pots
8
Composer
Yes
Yes
2
1
Yes
8 Closures
4 Pots
8
Composer
Yes
Yes
8
1
Yes
8 Closures
4 Pots
8
Composer
Yes
-
-
-
Yes
-
-
Composer
-
-
4
-
Yes
4 Closures
2 Pots
4
8
-
-
8
-
Yes
8 Closures
4 Pots
Prism 12x12
12
-
-
12
-
Yes
Prism 16x16
16
-
-
16
-
Jupiter 4
4
-
-
4
Jupiter 8
8
-
-
Jupiter 12
12
-
Zone Mix 761
4
8
1000 BaseT Ethernet Power Supply
Ports
Form
Factor
2
Internal and/or
External
1U Full
Rack
2
2
Internal
1U Full
Rack
Yes
2
2
Internal
1U Full
Rack
Yes
No
1
1
PoE+
1U Half
Rack
Composer
Yes
No
1
1
PoE+
1U Half
Rack
8
Composer
Yes
No
1
1
External
1U Full
Rack
8 Closures
4 Pots
8
Composer
Yes
No
1
1
External
1U Full
Rack
Yes
8 Closures
4 Pots
8
Composer
Yes
No
1
1
External
1U Full
Rack
-
Yes
4 Closures
2 Pots
4
Jupiter
No
No
1
-
External
1U Full
Rack
8
-
Yes
4 Closures
2 Pots
4
Jupiter
No
No
1
-
External
1U Full
Rack
-
4
-
Yes
4 Closures
2 Pots
4
Jupiter
No
No
1
-
External
1U Full
Rack
-
6
-
Yes
4 Closures
2 Pots
4
761
No
Yes
1
-
External
1U Full
Rack
Mic/Line
Inputs
Line Only
Inputs
AEC
Channels
Line
Outputs
Up to 16
-
Up to 16
Up to 16
4
Radius 12x8 EX
12
-
-
8
Radius AEC
8
4
8
Prism 0x0
-
-
Prism 4x4
4
Prism 8x8
Edge
Expansion
ARC Port
Slots
Copyright 2017, Symetrix, Inc. All Rights Reserved. All specifications and features subject to change without notice.
www.symetrix.co | T +1.425.778.7728
2 of 12
Prism 0x0
The Prism family is included in the Symetrix line of Dante™ enabled DSPs. Symetrix uses Dante, a multi-channel digital media
networking technology, to interconnect multiple Symetrix DSPs, Symetrix I/O expanders, and select third-party Dante enabled devices. Prism
is ideally suited for applications requiring powerful, extremely cost effective advanced signal processing coupled with a standardized means for
future expansion.
•
64x64 Dante and powerful Symetrix DSP reduce overall system costs.
•
Ultra low latency Dante network audio protocol uses standard IT infrastructure.
•
Cost-effective processing, mixing, and routing for Dante-enabled end points.
•
Configured using award winning Composer software. Controlled from ARC wall panels, ARC-WEB and third-party touchscreens. Embedded web
server enables remote metering and diagnostics.
•
Compact ½ rack format. PoE+ injector included. Rack and surface mount kits sold separately.
•
Front panel LCD provides configuration information, system status, and analog audio levels.
Electrical Specifications
ANALOG INPUTS
Number of Inputs
None.
ANALOG OUTPUTS
Number of Outputs
None.
SYSTEM
Sampling Rate
48 kHz.
Processors
1 x Analog Devices SHARC 21489 @ 400 MHz SIMD.
Raw Processing Capacity
400 MIPS, 1.6 GFLOPS.
Delay Memory
174 mono seconds.
RS-485 Serial I/O
38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port.
Ethernet Cable
Standard CAT5e or CAT6, maximum device-to-device length = 100 meters.
Dante Cable
Standard CAT6, maximum device-to-device length = 100 meters.
ARC Cable
Standard CAT5, distance dependent upon load and number of devices. 8 Watts maximum power available.
Maximum Devices Per System
80 units per Site File.
Maximum Stored Presets
1000.
Copyright 2017, Symetrix, Inc. All Rights Reserved. All specifications and features subject to change without notice.
www.symetrix.co | T +1.425.778.7728
3 of 12
Prism 0x0
! ARC: Distributes power and RS-485 data to one or more ARC
# Ethernet: 10/100 Base-T Ethernet port for Symetrix Composer
devices.
@ Dante: 1000 Base-T Ethernet port provides 128 (64x64) channels
of Dante network audio.
host control, third-party accessory controllers over IP, and power.
Features auto-crossover sensing for direct device-to-device connections.
$ Factory Reset Switch: To be used under the supervision of
technical support, it has the ability to reset the unit’s network
configuration and completely reset the unit to factory defaults.
Mechanical Specifications
Items
Specifications
Remarks
Space Required
Half rack unit (WDH: 20.83 cm x 23.83 cm x 4.37 cm / 8.2 in. x 9.38 in. x 1.72 in.)
Depth does not include connector allowance.
Allow at least 3 inches additional clearance for rear panel connections. Additional depth
may be required depending upon your specific wiring and connections.
Electrical
PoE+ IEEE 802.3at Class 4, 7 Watts minimum to 25.5 Watts maximum.
No line voltage switching required.
Note: Subject to change when actual power requirements are determined.
Ventilation
Maximum recommended ambient operating temperature is 30 C / 86 F.
Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in
minimum clearance). The ventilation should not be impeded by covering the ventilation
openings with items such as newspapers, tablecloths, curtains, etc.
Certifications or
Compliance
Safety: UL 60065, cUL 60065, IEC 60065.
EMC: “Class A” device (applies to all of the following) EN 55032,
EN 55103-2, EN 61000-3-2, EN 61000-3-3, FCC Part 15, ICES-003.
Environmental: RoHS.
Shipping Weight
5.1 lbs. (2.3 kg)
Architect and Engineer Specifications: Prism 0x0.
The half rack device shall provide network audio processing, mixing, and routing using the Dante™ protocol with a capacity of 128 (64×64) channels. The connector shall be 1000 Base-T RJ45 utilizing CAT6 cable.
A designer software application shall be provided that operates on a Windows computer, with network interface installed, running Windows® 7 or higher operating system. Computer connection for configuration shall be
via the device’s rear panel Ethernet connector. All internal processing shall be digital (DSP). Available DSP components shall include (but not be limited to) various forms of: mixers, equalizers, filters, crossovers, dynamics/
gain controls, routers, delays, remote controls, meters, generators, and diagnostics.
The front panel shall include a LCD and momentary switch. The display shall indicate unit name, IP address, MAC address, Site File version, and fault messages and can be switched between system overview and meter displays.
External control shall include dedicated software screens as well as preset selection, level control and muting using the optional ARC wall panel remote controls via industry-standard CAT5 cable with RJ45 connectors.
A built-in web server shall provide four instances of ARC-WEB, which allows for user control from nearly any web browser or mobile device. All program memory shall be non-volatile and provide program security should
power fail. The device shall provide an on board real time clock to facilitate automatic, timed changing of presets and may sync to NTP. Third-party control systems may interface over IP using a published ASCII control
protocol.
Internal processing shall be 32-bit or 40-bit floating point, 48 kHz.
The device shall be powered over Ethernet (PoE+) by an IEEE 802.3at Class 4 standard compliant switch, or the included injector. The device can be powered from either the Dante or Ethernet Port . The device shall meet
UL/CSA and CE safety requirements and comply with CE and FCC Part 15 emissions limits. The device shall be RoHS compliant. The chassis shall be constructed of cold rolled steel, and may be surface mounted or
mount into a standard 19” 1U EIA rack using an available bracket or rack tray. The device shall be a Symetrix Prism 0x0.
Copyright 2017, Symetrix, Inc. All Rights Reserved. All specifications and features subject to change without notice.
www.symetrix.co | T +1.425.778.7728
4 of 12
Prism 4x4
The Prism family is included in the Symetrix line of Dante™ enabled DSPs. Symetrix uses Dante, a multi-channel digital media
networking technology, to interconnect multiple Symetrix DSPs, Symetrix I/O expanders, and select third-party Dante enabled devices. Prism
is ideally suited for applications requiring powerful, extremely cost effective advanced signal processing coupled with a standardized means for
future expansion.
•
4 analog in and out, 64x64 Dante and powerful Symetrix DSP reduce overall system costs.
•
Ultra low latency Dante network audio protocol uses standard IT infrastructure.
•
Industry leading analog and A/D/D/A performance, 48 volt phantom mic power.
•
Configured using award winning Composer software. Controlled from ARC wall panels, ARC-WEB and third-party touchscreens. Embedded web
server enables remote metering and diagnostics.
•
Compact ½ rack format. PoE+ injector included. Rack and surface mount kits sold separately.
•
Front panel LCD provides configuration information, system status, and analog audio levels.
Electrical Specifications
ANALOG INPUTS
Number of Inputs
Four (4) switchable balanced mic or line level.
Connectors
3.81 mm terminal blocks.
Nominal Input Level
+4 dBu.
Maximum Input Level
+23 dBu.
Mic Pre-amp gain
0, 12, 24, 44 or 54 dB switchable with ± 24 dB trim.
Mic Pre-amp EIN
< -125dB with 150 ohm source impedance. 22.4 kHz BW.
CMRR
> 79 dB @ 1 kHz, unity gain.
Input impedance
8k Ohms balanced, 4k Ohms unbalanced.
Phantom power (per input)
+48 VDC, 10 mA maximum.
Dynamic range
> 113 dB, A-weighted.
THD+Noise
< -100 dB; 22.4 kHz BW, unweighted; 1 kHz @ +15 dBu with 0 dB gain. Course gain is set to +4dBu.
A to D Latency
0.28 mS.
ANALOG OUTPUTS
Number of Outputs
Four (4) balanced line level.
Connectors
3.81 mm terminal blocks.
Nominal Output Level
+4 dBu with 20 dB of headroom.
Maximum Output Level
+24 dBu (+22.8 dBu into a 2k Ohm minimum load).
Output Impedance
300 Ohms balanced, 150 Ohms unbalanced.
Dynamic Range
> 117 dB, A-weighted.
THD+Noise
< -97 dB; 22.4 kHz BW, unweighted; 1 kHz, 0 dB gain +8dBu output.
D to A Latency
0.60 mS.
SYSTEM
Sampling Rate
48 kHz.
Frequency Response (A/D/A)
20 Hz – 20 kHz, ± 0.5 dB.
Dynamic Range (A/D/A)
> 113 dB, A-weighted.
Channel Separation (A/D/A)
> 110 dB @ 1 kHz, +24 dBu.
THD+Noise
< 95 dB (22.4 kHz BW, un-weighted); 1 kHz @ +15 dBu with 0 dB gain.
Latency (A/D/A)
1.04 mS, inputs routed to outputs.
Processors
1 x Analog Devices SHARC 21489 @ 400 MHz SIMD.
Raw Processing Capacity
400 MIPS, 1.6 GFLOPS.
Delay Memory
174 mono seconds.
Analog control inputs
0-3.3 VDC.
Copyright 2017, Symetrix, Inc. All Rights Reserved. All specifications and features subject to change without notice.
www.symetrix.co | T +1.425.778.7728
5 of 12
Prism 4x4
! ARC: Distributes power and RS-485 data to one or more ARC
% Logic Outputs: Four (4) logic outputs with two (2) paired
devices.
@ Dante: 1000 Base-T Ethernet port provides 128 (64x64) channels
of Dante network audio.
# Ethernet: 10/100 Base-T Ethernet port for Symetrix Composer
host control, third-party accessory controllers over IP, and power.
Features auto-crossover sensing for direct device-to-device connections.
^
&
$ Factory Reset Switch: To be used under the supervision of
technical support, it has the ability to reset the unit’s network
configuration and completely reset the unit to factory defaults.
*
common ground pins. Logic Outputs go low (0V) when active,
and are internally pulled high (5V) when inactive and can drive
external LED indicators directly.
External Control Inputs: : Four (4) analog control inputs able
to be used as 2 potentiometer inputs or as 4 switch inputs
(+3.3 VDC reference voltage supplied).
Analog Line Outputs: Four (4) balanced analog line level audio
outputs, with individually software-controllable +/- 24 dB of digital
trim and mute.
Analog Mic/Line Inputs: Four (4) balanced analog audio inputs,
with individually software-controllable pre-amp gain (reference
levels of -50 dBu, -40 dBu, -20 dBu, -10 dBV and +4 dBu), +/24 dB of digital trim, phantom power, signal inversion and mute.
SYSTEM (continued)
Recommended External Control Potentiometer
10k Ohm, linear.
Logic Outputs
Low (0V) when active, pulled high (5V) when inactive.
Logic Output Maximum External Power Supply Voltage
24 VDC.
Logic Output Maximum External Power Supply Current Sinking
50 mA.
Logic Output Maximum Output Current
10 mA.
RS-485 Serial I/O
38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port.
Ethernet Cable
Standard CAT5e or CAT6, maximum device-to-device length = 100 meters.
Dante Cable
Standard CAT6, maximum device-to-device length = 100 meters.
ARC Cable
Standard CAT5, distance dependent upon load and number of devices. 8 Watts maximum power available.
Maximum Devices Per System
80 units per Site File.
Maximum Stored Presets
1000.
Mechanical Specifications
Items
Space Required
Electrical
Specifications
Remarks
Half rack unit (WDH: 20.83 cm x 23.83 cm x 4.37 cm / 8.2 in. x 9.38 in. x 1.72 in.)
Depth does not include connector allowance.
PoE+ IEEE 802.3at Class 4, 25.5 Watts maximum. No line voltage
switching required.
Ventilation
Maximum recommended ambient operating temperature is 30 C / 86 F.
Certifications or
Compliance
Safety: UL 60065, cUL 60065, IEC 60065.
EMC: “Class A” device (applies to all of the following) EN 55032,
EN 55103-2, EN 61000-3-2, EN 61000-3-3, FCC Part 15, ICES-003.
Environmental: RoHS.
Shipping Weight
5.1 lbs. (2.3 kg)
Allow at least 3 inches additional clearance for rear panel connections. Additional depth
may be required depending upon your specific wiring and connections.
Note: Subject to change when actual power requirements are determined.
Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in
minimum clearance). The ventilation should not be impeded by covering the ventilation
openings with items such as newspapers, tablecloths, curtains, etc.
Architect and Engineer Specifications: Prism 4x4.
The half rack device shall provide four analog mic/line inputs that are adjustable from line to mic level with coarse gain, fine trim and phantom power plus four analog line outputs that are adjustable with fine trim. Levels,
phantom powers, signal inversions and mutes shall be controllable via software. Audio connections shall be accessed via rear panel 3.81 mm terminal block connectors.
Network audio expansion shall be provided by the Dante™ protocol with a capacity of 128 (64x64) channels. The connector shall be 1000 Base-T RJ45 utilizing CAT6 cable.
A designer software application shall be provided that operates on a Windows computer, with network interface installed, running Windows® 7 or higher operating system. Computer connection for configuration shall be
via the device’s rear panel Ethernet connector. All internal processing shall be digital (DSP). Available DSP components shall include (but not be limited to) various forms of: mixers, equalizers, filters, crossovers, dynamics/
gain controls, routers, delays, remote controls, meters, generators, onboard logic, and diagnostics.
The front panel shall include a LCD and momentary switch. The display shall indicate unit name, IP address, MAC address, Site File version, and fault messages and can be switched between system overview and meter displays.
External control shall include dedicated software screens as well as preset selection, I/O level control and muting using the optional ARC wall panel remote controls via industry-standard CAT5 cable with RJ45
connectors. A built-in web server shall provide four instances of ARC-WEB, which allows for user control from nearly any web browser or mobile device. Logic I/O shall consist of four contact closures or two potentiometer
inputs along with four logic outputs. The logic outputs may be used to drive LEDs directly or control external relays or switchers. All program memory shall be non-volatile and provide program security should power fail.
The device shall provide an on board real time clock to facilitate automatic, timed changing of presets and may sync to NTP. Third-party control systems may interface over IP using a published ASCII control protocol.
Audio conversion shall be 24-bit, 48 kHz and internal processing shall be 32-bit or 40-bit floating point, 48 kHz. The dynamic range shall not be lower than 113 dB, A-weighted with a maximum input level of +23 dBu and
maximum output level of +24 dBu.
The device shall be powered over Ethernet (PoE+) by an IEEE 802.3at Class 4 standard compliant switch, or the included injector. The device can be powered from either the Dante or Ethernet Port. The device shall meet
UL/CSA and CE safety requirements and comply with CE and FCC Part 15 emissions limits. The device shall be RoHS compliant. The chassis shall be constructed of cold rolled steel, and may be surface mounted or
mount into a standard 19” 1U EIA rack using an available bracket or rack tray. The device shall be a Symetrix Prism 4x4.
Copyright 2017, Symetrix, Inc. All Rights Reserved. All specifications and features subject to change without notice.
www.symetrix.co | T +1.425.778.7728
6 of 12
Prism 8x8
The Prism family is included in the Symetrix line of Dante™ enabled DSPs. Symetrix uses Dante, a multi-channel digital media
networking technology, to interconnect multiple Symetrix DSPs, Symetrix I/O expanders, and select third-party Dante enabled devices. Prism
is ideally suited for applications requiring powerful, extremely cost effective advanced signal processing coupled with a standardized means for
future expansion.
•
8 analog in and out, 64x64 Dante and powerful Symetrix DSP reduce overall system costs.
•
Ultra low latency Dante network audio protocol uses standard IT infrastructure.
•
Industry leading analog and A/D/D/A performance, 48 volt phantom mic power.
•
Configured using award winning Composer software. Controlled from ARC wall panels, ARC-WEB and third-party touchscreens. Embedded web
server enables remote metering and diagnostics.
•
Front panel LCD provides configuration information, system status, and analog audio levels.
Electrical Specifications
ANALOG INPUTS
Number of Inputs
Eight (8) switchable balanced mic or line level.
Connectors
3.81 mm terminal blocks.
Nominal Input Level
+4 dBu.
Maximum Input Level
+23 dBu.
Mic Pre-amp gain
0, 12, 24, 44 or 54 dB switchable with ± 24 dB trim.
Mic Pre-amp EIN
< -125dB with 150 ohm source impedance. 22.4 kHz BW.
CMRR
> 79 dB @ 1 kHz, unity gain.
Input impedance
8k Ohms balanced, 4k Ohms unbalanced.
Phantom power (per input)
+48 VDC, 10 mA maximum.
Dynamic range
> 113 dB, A-weighted.
THD+Noise
< -100 dB; 22.4 kHz BW, unweighted; 1 kHz @ +15 dBu with 0 dB gain. Course gain is set to +4dBu.
A to D Latency
0.28 mS.
ANALOG OUTPUTS
Number of Outputs
Eight (8) balanced line level.
Connectors
3.81 mm terminal blocks.
Nominal Output Level
+4 dBu with 20 dB of headroom.
Maximum Output Level
+24 dBu (+22.8 dBu into a 2k Ohm minimum load).
Output Impedance
300 Ohms balanced, 150 Ohms unbalanced.
Dynamic Range
> 117 dB, A-weighted.
THD+Noise
< -97 dB; 22.4 kHz BW, unweighted; 1 kHz, 0 dB gain +8dBu output.
D to A Latency
0.60 mS.
SYSTEM
Sampling Rate
48 kHz.
Frequency Response (A/D/A)
20 Hz – 20 kHz, ± 0.5 dB.
Dynamic Range (A/D/A)
> 113 dB, A-weighted.
Channel Separation (A/D/A)
> 110 dB @ 1 kHz, +24 dBu.
THD+Noise
< 95 dB (22.4 kHz BW, un-weighted); 1 kHz @ +15 dBu with 0 dB gain.
Latency (A/D/A)
1.04 mS, inputs routed to outputs.
Processors
1 x Analog Devices SHARC 21489 @ 400 MHz SIMD.
Raw Processing Capacity
400 MIPS, 1.6 GFLOPS.
Delay Memory
174 mono seconds.
Analog control inputs
0-3.3 VDC.
Copyright 2017, Symetrix, Inc. All Rights Reserved. All specifications and features subject to change without notice.
www.symetrix.co | T +1.425.778.7728
7 of 12
Prism 8x8
! Power: Switching power supply providing 24 VDC @ 1.4 amperes.
NOTE: Each power supply will accept a 100-240 VAC input.
^ Logic Outputs: Eight (8) logic outputs with four (4) paired
@ ARC: Distributes power and RS-485 data to one or more ARC
devices.
# Dante: 1000 Base-T Ethernet port provides 128 (64x64) channels
&
$
*
%
of Dante network audio.
Ethernet: 10/100 Base-T Ethernet port for Symetrix Composer
host control, third-party accessory controllers over IP, and power.
Features auto-crossover sensing for direct device-to-device
connections.
Factory Reset Switch: To be used under the supervision
of technical support, it has the ability to reset the unit’s network
configuration and completely reset the unit to factory defaults.
(
common ground pins. Logic Outputs go low (0V) when active,
and are internally pulled high (5V) when inactive and can drive
external LED indicators directly.
External Control Inputs: Four (4) analog control inputs able to
be used as 4 potentiometer inputs or as 8 switch inputs (+3.3
VDC reference voltage supplied).
Analog Line Outputs: Eight (8) balanced analog line level audio
outputs, with individually software-controllable +/- 24 dB of digital
trim and mute.
Analog Mic/Line Inputs: Eight (8) balanced analog audio inputs, with
individually software-controllable pre-amp gain (reference levels
of -50 dBu, -40 dBu, -20 dBu, -10 dBV and +4 dBu), +/- 24 dB
of digital trim, phantom power, signal inversion and mute.
SYSTEM (continued)
Recommended External Control Potentiometer
10k Ohm, linear.
Logic Outputs
Low (0V) when active, pulled high (5V) when inactive.
Logic Output Maximum External Power Supply Voltage
24 VDC.
Logic Output Maximum External Power Supply Current Sinking
50 mA.
Logic Output Maximum Output Current
10 mA.
RS-485 Serial I/O
38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port.
Ethernet Cable
Standard CAT5e or CAT6, maximum device-to-device length = 100 meters.
Dante Cable
Standard CAT6, maximum device-to-device length = 100 meters.
ARC Cable
Standard CAT5, distance dependent upon load and number of devices. 8 Watts maximum power available.
Maximum Devices Per System
80 units per Site File.
Maximum Stored Presets
1000.
Mechanical Specifications
Items
Specifications
Remarks
Space Required
1U (WDH: 18.91 in. x 9.88 in. x 1.72 in. / 48.02 cm x 25.1 cm x 4.37 cm).
Depth does not include connector allowance.
Electrical
24V 1.4A, 34W Maximum.
Ventilation
Maximum recommended ambient operating temperature is 30 C / 86 F.
Certifications or
Compliance
Safety: UL 60065, cUL 60065, IEC 60065.
EMC: “Class A” device (applies to all of the following) EN 55032,
EN 55103-2, EN 61000-3-2, EN 61000-3-3, FCC Part 15, ICES-003
Environmental: RoHS.
Shipping Weight
9.4 lbs. (4.2 kg).
Allow at least 3 inch additional clearance for rear panel connections. Additional depth may
be required depending upon your specific wiring and connections.
Symetrix Part Number 12-0034.
CUI part number SDI65-24-U-P5.
Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in
minimum clearance). The ventilation should not be impeded by covering the ventilation
openings with items such as newspapers, tablecloths, curtains, etc.
Architect and Engineer Specifications: Prism 8x8.
The device shall provide eight analog mic/line inputs that are adjustable from line to mic level with coarse gain, fine trim and phantom power plus eight analog line outputs that are adjustable with fine trim. Levels, phantom powers, signal
inversions and mutes shall be controllable via software. Audio connections shall be accessed via rear panel 3.81 mm terminal block connectors.
Network audio expansion shall be provided by the Dante™ protocol with a capacity of 128 (64x64) channels. The connector shall be 1000 Base-T RJ45 utilizing CAT6 cable.
A designer software application shall be provided that operates on a Windows computer, with network interface installed, running Windows® 7 or higher operating system. Computer connection for configuration shall be via the device’s
rear panel Ethernet connector. All internal processing shall be digital (DSP). Available DSP components shall include (but not be limited to) various forms of: mixers, equalizers, filters, crossovers, dynamics/gain controls, routers, delays,
remote controls, meters, generators, onboard logic, and diagnostics.
The front panel shall include a LCD and momentary switch. The display shall indicate unit name, IP address, MAC address, Site File version, and fault messages and can be switched between system overview and meter displays.
External control shall include dedicated software screens as well as preset selection, I/O level control and muting using the optional ARC wall panel remote controls via industry-standard CAT5 cable with RJ45 connectors. A built-in web
server shall provide four instances of ARC-WEB, which allows for user control from nearly any web browser or mobile device. Logic I/O shall consist of eight contact closures or four potentiometer inputs along with eight logic outputs.
The logic outputs may be used to drive LEDs directly or control external relays or switchers. All program memory shall be non-volatile and provide program security should power fail. The device shall provide an on board real time clock
to facilitate automatic, timed changing of presets and may sync to NTP. Third-party control systems may interface over IP using a published ASCII control protocol.
Audio conversion shall be 24-bit, 48 kHz and internal processing shall be 32-bit or 40-bit floating point, 48 kHz. The dynamic range shall not be lower than 113 dB, A-weighted with a maximum input level of +23 dBu and maximum
output level of +24 dBu.
The device shall have a power plug that accepts power from Symetrix part number 12-0034, CUI power supply part number SDI65-24-U-P5. The device shall meet UL/CSA and CE safety requirements and comply with CE and FCC
Part 15 emissions limits. The device shall be RoHS compliant. The chassis shall be constructed of cold rolled steel, and mounts into a standard 19” 1U EIA rack. The device shall be a Symetrix Prism 8x8.
Copyright 2017, Symetrix, Inc. All Rights Reserved. All specifications and features subject to change without notice.
www.symetrix.co | T +1.425.778.7728
8 of 12
Prism 12x12
The Prism family is included in the Symetrix line of Dante™ enabled DSPs. Symetrix uses Dante, a multi-channel digital media
networking technology, to interconnect multiple Symetrix DSPs, Symetrix I/O expanders, and select third-party Dante enabled devices. Prism
is ideally suited for applications requiring powerful, extremely cost effective advanced signal processing coupled with a standardized means for
future expansion.
•
12 analog in and out, 64x64 Dante and powerful Symetrix DSP reduce overall system costs.
•
Ultra low latency Dante network audio protocol uses standard IT infrastructure.
•
Industry leading analog and A/D/D/A performance, 48 volt phantom mic power.
•
Configured using award winning Composer software. Controlled from ARC wall panels, ARC-WEB and third-party touchscreens. Embedded web
server enables remote metering and diagnostics.
•
Front panel LCD provides configuration information, system status, and analog audio levels.
Electrical Specifications
ANALOG INPUTS
Number of Inputs
Twelve (12) switchable balanced mic or line level.
Connectors
3.81 mm terminal blocks.
Nominal Input Level
+4 dBu.
Maximum Input Level
+23 dBu.
Mic Pre-amp gain
0, 12, 24, 44 or 54 dB switchable with ± 24 dB trim.
Mic Pre-amp EIN
< -125dB with 150 ohm source impedance. 22.4 kHz BW.
CMRR
> 79 dB @ 1 kHz, unity gain.
Input impedance
8k Ohms balanced, 4k Ohms unbalanced.
Phantom power (per input)
+48 VDC, 10 mA maximum.
Dynamic range
> 113 dB, A-weighted.
THD+Noise
< -100 dB; 22.4 kHz BW, unweighted; 1 kHz @ +15 dBu with 0 dB gain. Course gain is set to +4dBu.
A to D Latency
0.28 mS.
ANALOG OUTPUTS
Number of Outputs
Twelve (12) balanced line level.
Connectors
3.81 mm terminal blocks.
Nominal Output Level
+4 dBu with 20 dB of headroom.
Maximum Output Level
+24 dBu (+22.8 dBu into a 2k Ohm minimum load).
Output Impedance
300 Ohms balanced, 150 Ohms unbalanced.
Dynamic Range
> 117 dB, A-weighted.
THD+Noise
< -97 dB; 22.4 kHz BW, unweighted; 1 kHz, 0 dB gain +8dBu output.
D to A Latency
0.60 mS.
SYSTEM
Sampling Rate
48 kHz.
Frequency Response (A/D/A)
20 Hz – 20 kHz, ± 0.5 dB.
Dynamic Range (A/D/A)
> 113 dB, A-weighted.
Channel Separation (A/D/A)
> 110 dB @ 1 kHz, +24 dBu.
THD+Noise
< 95 dB (22.4 kHz BW, un-weighted); 1 kHz @ +15 dBu with 0 dB gain.
Latency (A/D/A)
1.04 mS, inputs routed to outputs.
Processors
1 x Analog Devices SHARC 21489 @ 400 MHz SIMD.
Raw Processing Capacity
400 MIPS, 1.6 GFLOPS.
Delay Memory
174 mono seconds.
Analog control inputs
0-3.3 VDC.
Copyright 2017, Symetrix, Inc. All Rights Reserved. All specifications and features subject to change without notice.
www.symetrix.co | T +1.425.778.7728
9 of 12
Prism 12x12
! Power: Switching power supply providing 24 VDC @ 1.9 amperes.
NOTE: Each power supply will accept a 100-240 VAC input.
^ Logic Outputs: Eight (8) logic outputs with four (4) paired
@ ARC: Distributes power and RS-485 data to one or more ARC
devices.
# Dante: 1000 Base-T Ethernet port provides 128 (64x64) channels
&
$
*
%
of Dante network audio.
Ethernet: 10/100 Base-T Ethernet port for Symetrix Composer
host control, third-party accessory controllers over IP, and power.
Features auto-crossover sensing for direct device-to-device
connections.
Factory Reset Switch: To be used under the supervision
of technical support, it has the ability to reset the unit’s network
configuration and completely reset the unit to factory defaults.
(
common ground pins. Logic Outputs go low (0V) when active,
and are internally pulled high (5V) when inactive and can drive
external LED indicators directly.
External Control Inputs: : Four (4) analog control inputs able to
be used as 4 potentiometer inputs or as 8 switch inputs (+3.3
VDC reference voltage supplied).
Analog Line Outputs: Twelve (12) balanced analog line level audio
outputs, with individually software-controllable +/- 24 dB of digital
trim and mute.
Analog Mic/Line Inputs: Twelve (12) balanced analog audio inputs,
with individually software-controllable pre-amp gain (reference
levels of -50 dBu, -40 dBu, -20 dBu, -10 dBV and +4 dBu), +/- 24
dB of digital trim, phantom power, signal inversion and mute.
SYSTEM (continued)
Recommended External Control Potentiometer
10k Ohm, linear.
Logic Outputs
Low (0V) when active, pulled high (5V) when inactive.
Logic Output Maximum External Power Supply Voltage
24 VDC.
Logic Output Maximum External Power Supply Current Sinking
50 mA.
Logic Output Maximum Output Current
10 mA.
RS-485 Serial I/O
38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port.
Ethernet Cable
Standard CAT5e or CAT6, maximum device-to-device length = 100 meters.
Dante Cable
Standard CAT6, maximum device-to-device length = 100 meters.
ARC Cable
Standard CAT5, distance dependent upon load and number of devices. 8 Watts maximum power available.
Maximum Devices Per System
80 units per Site File.
Maximum Stored Presets
1000.
Mechanical Specifications
Items
Specifications
Remarks
Space Required
1U (WDH: 18.91 in. x 9.88 in. x 1.72 in. / 48.02 cm x 25.1 cm x 4.37 cm).
Depth does not include connector allowance.
Electrical
24V 1.9A, 45W Maximum.
Ventilation
Maximum recommended ambient operating temperature is 30 C / 86 F.
Certifications or
Compliance
Safety: UL 60065, cUL 60065, IEC 60065.
EMC: “Class A” device (applies to all of the following) EN 55032,
EN 55103-2, EN 61000-3-2, EN 61000-3-3, FCC Part 15, ICES-003.
Environmental: RoHS.
Shipping Weight
9.4 lbs. (4.2 kg)
Allow at least 3 inch additional clearance for rear panel connections. Additional depth may
be required depending upon your specific wiring and connections.
Symetrix Part Number 12-0034.
CUI part number SDI65-24-U-P5.
Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in
minimum clearance). The ventilation should not be impeded by covering the ventilation
openings with items such as newspapers, tablecloths, curtains, etc.
Architect and Engineer Specifications: Prism 12x12.
The device shall provide twelve analog mic/line inputs that are adjustable from line to mic level with coarse gain, fine trim and phantom power plus twelve analog line outputs that are adjustable with fine trim. Levels, phantom
powers, signal inversions and mutes shall be controllable via software. Audio connections shall be accessed via rear panel 3.81 mm terminal block connectors.
Network audio expansion shall be provided by the Dante™ protocol with a capacity of 128 (64x64) channels. The connector shall be 1000 Base-T RJ45 utilizing CAT6 cable.
A designer software application shall be provided that operates on a Windows computer, with network interface installed, running Windows® 7 or higher operating system. Computer connection for configuration shall be via the
device’s rear panel Ethernet connector. All internal processing shall be digital (DSP). Available DSP components shall include (but not be limited to) various forms of: mixers, equalizers, filters, crossovers, dynamics/gain controls,
routers, delays, remote controls, meters, generators, onboard logic, and diagnostics.
The front panel shall include a LCD and momentary switch. The display shall indicate unit name, IP address, MAC address, Site File version, and fault messages and can be switched between system overview and meter displays.
External control shall include dedicated software screens as well as preset selection, I/O level control and muting using the optional ARC wall panel remote controls via industry-standard CAT5 cable with RJ45 connectors. A
built-in web server shall provide four instances of ARC-WEB, which allows for user control from nearly any web browser or mobile device. Logic I/O shall consist of eight contact closures or four potentiometer inputs along with
eight logic outputs. The logic outputs may be used to drive LEDs directly or control external relays or switchers. All program memory shall be non-volatile and provide program security should power fail. The device shall provide
an on board real time clock to facilitate automatic, timed changing of presets and may sync to NTP. Third-party control systems may interface over IP using a published ASCII control protocol.
Audio conversion shall be 24-bit, 48 kHz and internal processing shall be 32-bit or 40-bit floating point, 48 kHz. The dynamic range shall not be lower than 113 dB, A-weighted with a maximum input level of +23 dBu and
maximum output level of +24 dBu.
The device shall have a power plug that accepts power from Symetrix part number 12-0034, CUI power supply part number SDI65-24-U-P5. The device shall meet UL/CSA and CE safety requirements and
comply with CE and FCC Part 15 emissions limits. The device shall be RoHS compliant. The chassis shall be constructed of cold rolled steel, and mounts into a standard 19” 1U EIA rack. The device shall be a
Symetrix Prism 12x12.
Copyright 2017, Symetrix, Inc. All Rights Reserved. All specifications and features subject to change without notice.
www.symetrix.co | T +1.425.778.7728
10 of 12
Prism 16x16
The Prism family is included in the Symetrix line of Dante™ enabled DSPs. Symetrix uses Dante, a multi-channel digital media
networking technology, to interconnect multiple Symetrix DSPs, Symetrix I/O expanders, and select third-party Dante enabled devices. Prism
is ideally suited for applications requiring powerful, extremely cost effective advanced signal processing coupled with a standardized means for
future expansion.
•
16 analog in and out, 64x64 Dante and powerful Symetrix DSP reduce overall system costs.
•
Ultra low latency Dante network audio protocol uses standard IT infrastructure.
•
Industry leading analog and A/D/D/A performance, 48 volt phantom mic power.
•
Configured using award winning Composer software. Controlled from ARC wall panels, ARC-WEB and third-party touchscreens. Embedded web
server enables remote metering and diagnostics.
•
Front panel LCD provides configuration information, system status, and analog audio levels.
Electrical Specifications
ANALOG INPUTS
Number of Inputs
Sixteen (16) switchable balanced mic or line level.
Connectors
3.81 mm terminal blocks.
Nominal Input Level
+4 dBu.
Maximum Input Level
+23 dBu.
Mic Pre-amp gain
0, 12, 24, 44 or 54 dB switchable with ± 24 dB trim.
Mic Pre-amp EIN
< -125dB with 150 ohm source impedance. 22.4 kHz BW.
CMRR
> 79 dB @ 1 kHz, unity gain.
Input impedance
8k Ohms balanced, 4k Ohms unbalanced.
Phantom power (per input)
+48 VDC, 10 mA maximum.
Dynamic range
> 113 dB, A-weighted.
THD+Noise
< -100 dB; 22.4 kHz BW, unweighted; 1 kHz @ +15 dBu with 0 dB gain. Course gain is set to +4dBu.
A to D Latency
0.28 mS.
ANALOG OUTPUTS
Number of Outputs
Sixteen (16) balanced line level.
Connectors
3.81 mm terminal blocks.
Nominal Output Level
+4 dBu with 20 dB of headroom.
Maximum Output Level
+24 dBu (+22.8 dBu into a 2k Ohm minimum load).
Output Impedance
300 Ohms balanced, 150 Ohms unbalanced.
Dynamic Range
> 117 dB, A-weighted.
THD+Noise
< -97 dB; 22.4 kHz BW, unweighted; 1 kHz, 0 dB gain +8dBu output.
D to A Latency
0.60 mS.
SYSTEM
Sampling Rate
48 kHz.
Frequency Response (A/D/A)
20 Hz – 20 kHz, ± 0.5 dB.
Dynamic Range (A/D/A)
> 113 dB, A-weighted.
Channel Separation (A/D/A)
> 110 dB @ 1 kHz, +24 dBu.
THD+Noise
< 95 dB (22.4 kHz BW, un-weighted); 1 kHz @ +15 dBu with 0 dB gain.
Latency (A/D/A)
1.04 mS, inputs routed to outputs.
Processors
1 x Analog Devices SHARC 21489 @ 400 MHz SIMD.
Raw Processing Capacity
400 MIPS, 1.6 GFLOPS.
Delay Memory
174 mono seconds.
Analog control inputs
0-3.3 VDC.
Copyright 2017, Symetrix, Inc. All Rights Reserved. All specifications and features subject to change without notice.
www.symetrix.co | T +1.425.778.7728
11 of 12
Prism 16x16
! Power: Switching power supply providing 24 VDC @ 2.3 amperes.
NOTE: Each power supply will accept a 100-240 VAC input.
^ Logic Outputs: Eight (8) logic outputs with four (4) paired
@ ARC: Distributes power and RS-485 data to one or more ARC
devices.
# Dante: 1000 Base-T Ethernet port provides 128 (64x64) channels
&
$
*
%
of Dante network audio.
Ethernet: 10/100 Base-T Ethernet port for Symetrix Composer
host control, third-party accessory controllers over IP, and power.
Features auto-crossover sensing for direct device-to-device
connections.
Factory Reset Switch: To be used under the supervision
of technical support, it has the ability to reset the unit’s network
configuration and completely reset the unit to factory defaults.
(
common ground pins. Logic Outputs go low (0V) when active,
and are internally pulled high (5V) when inactive and can drive
external LED indicators directly.
External Control Inputs: : Four (4) analog control inputs able to
be used as 4 potentiometer inputs or as 8 switch inputs (+3.3
VDC reference voltage supplied).
Analog Line Outputs: Sixteen (16) balanced analog line level
audio outputs, with individually software-controllable +/- 24 dB of
digital trim and mute.
Analog Mic/Line Inputs: Sixteen (16) balanced analog audio inputs,
with individually software-controllable pre-amp gain (reference levels
of -50 dBu, -40 dBu, -20 dBu, -10 dBV and +4 dBu), +/- 24 dB of
digital trim, phantom power, signal inversion and mute.
SYSTEM (continued)
Recommended External Control Potentiometer
10k Ohm, linear.
Logic Outputs
Low (0V) when active, pulled high (5V) when inactive.
Logic Output Maximum External Power Supply Voltage
24 VDC.
Logic Output Maximum External Power Supply Current Sinking
50 mA.
Logic Output Maximum Output Current
10 mA.
RS-485 Serial I/O
38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port.
Ethernet Cable
Standard CAT5e or CAT6, maximum device-to-device length = 100 meters.
Dante Cable
Standard CAT6, maximum device-to-device length = 100 meters.
ARC Cable
Standard CAT5, distance dependent upon load and number of devices. 8 Watts maximum power available.
Maximum Devices Per System
80 units per Site File.
Maximum Stored Presets
1000.
Mechanical Specifications
Items
Specifications
Remarks
Space Required
1U (WDH: 18.91 in. x 9.88 in. x 1.72 in. / 48.02 cm x 25.1 cm x 4.37 cm).
Depth does not include connector allowance.
Electrical
24V 2.3A, 56W Maximum.
Ventilation
Maximum recommended ambient operating temperature is 30 C / 86 F.
Certifications or
Compliance
Safety: UL 60065, cUL 60065, IEC 60065.
EMC: “Class A” device (applies to all of the following) EN 55032,
EN 55103-2, EN 61000-3-2, EN 61000-3-3, FCC Part 15, ICES-003
Environmental: RoHS.
Shipping Weight
9.4 lbs. (4.2 kg)
Allow at least 3 inch additional clearance for rear panel connections. Additional depth may
be required depending upon your specific wiring and connections.
Symetrix Part Number 12-0034.
CUI part number SDI65-24-U-P5.
Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in
minimum clearance). The ventilation should not be impeded by covering the ventilation
openings with items such as newspapers, tablecloths, curtains, etc.
Architect and Engineer Specifications: Prism 16x16.
The device shall provide sixteen analog mic/line inputs that are adjustable from line to mic level with coarse gain, fine trim and phantom power plus sixteen analog line outputs that are adjustable with fine trim. Levels, phantom
powers, signal inversions and mutes shall be controllable via software. Audio connections shall be accessed via rear panel 3.81 mm terminal block connectors.
Network audio expansion shall be provided by the Dante™ protocol with a capacity of 128 (64x64) channels. The connector shall be 1000 Base-T RJ45 utilizing CAT6 cable.
A designer software application shall be provided that operates on a Windows computer, with network interface installed, running Windows® 7 or higher operating system. Computer connection for configuration shall be via the
device’s rear panel Ethernet connector. All internal processing shall be digital (DSP). Available DSP components shall include (but not be limited to) various forms of: mixers, equalizers, filters, crossovers, dynamics/gain controls,
routers, delays, remote controls, meters, generators, onboard logic, and diagnostics.
The front panel shall include a LCD and momentary switch. The display shall indicate unit name, IP address, MAC address, Site File version, and fault messages and can be switched between system overview and meter displays.
External control shall include dedicated software screens as well as preset selection, I/O level control and muting using the optional ARC wall panel remote controls via industry-standard CAT5 cable with RJ45 connectors. A built-in
web server shall provide four instances of ARC-WEB, which allows for user control from nearly any web browser or mobile device. Logic I/O shall consist of eight contact closures or four potentiometer inputs along with eight logic
outputs. The logic outputs may be used to drive LEDs directly or control external relays or switchers. All program memory shall be non-volatile and provide program security should power fail. The device shall provide an on board
real time clock to facilitate automatic, timed changing of presets and may sync to NTP. Third-party control systems may interface over IP using a published ASCII control protocol.
Audio conversion shall be 24-bit, 48 kHz and internal processing shall be 32-bit or 40-bit floating point, 48 kHz. The dynamic range shall not be lower than 113 dB, A-weighted with a maximum input level of +23 dBu and maximum
output level of +24 dBu.
The device shall have a power plug that accepts power from Symetrix part number 12-0034, CUI power supply part number SDI65-24-U-P5. The device shall meet UL/CSA and CE safety requirements and comply with
CE and FCC Part 15 emissions limits. The device shall be RoHS compliant. The chassis shall be constructed of cold rolled steel, and mounts into a standard 19” 1U EIA rack. The device shall be a Symetrix Prism 16x16.
Copyright 2017, Symetrix, Inc. All Rights Reserved. All specifications and features subject to change without notice.
www.symetrix.co | T +1.425.778.7728
12 of 12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising