RadarRight™ Series 400 - Monitor Technologies LLC

RadarRight™ Series 400 - Monitor Technologies LLC
Pra ctica l solution s... at eve ry leve l!
RadarRight™ Series 400
NonContact
Non-Contact Radar Continuous Level
Sensor for Powders & Bulk Solids
s
t
t
t
FEATURES & ADVANTAGES
Non-contact level measurement solution...nothing to “touch” your process.
For Powders &
Bulk Solids
Real-time continuous output provides immediate level measurements.
No moving parts to wear which leads to long operational life and low maintenance.
t
Proven microwave “pulse” technology for dependable measurements.
t
Small beam angle to concentrate energy for high accuracy and reliability with materials
t
Small antenna sizes (diameters) for easy mounting.
t
t
t
t
t
t
s
Easy set-up / configuration with LCD push button display module (included).
having a wide range of characteristics.
Minimal “dead band” (“blanking zone”) for optimum measurement in vessel.
Gimbal (swivel) style process connection allows for aiming antenna for added measurement accuracy and
avoiding internal obstacles, flow streams, etc.
Advanced microprocessor and unique echo processing technology provide for reliable operation under various
process conditions.
Air purge or dust shield options to optimize sensor performance in dusty conditions.
Extremely low emission power with “pulse” technology; is harmless towards the environment and human beings.
PRINCIPLE OF OPERATION
The RadarRight™ radar level instrument emits a microwave pulse from its antenna, which travels at the speed of light to the
surface of the medium below. The time-of-flight of the pulse and its reflection back to the instrument location is directly related to
the empty distance in the vessel and the material level. The output from the electronics is continuously updated as the level of the
material surface changes. The RadarRight radar level instrument uses the proven 26GHz as the transmitting frequency.
s
PRACTICAL APPLICATIONS
t Excellent when application requires that nothing
contacts or interferes with the process.
t Strong performance with powders and bulk solids in
vessels up to 98.5 ft. (30m) tall.
t Provides measurements in dusty conditions.
t Suitable for various metal or nonmetal vessels.
t Can monitor height of material on an open area
conveyor belt.
s
OPTIONS
t Output Options:
t “Smart” RS-485 (Modbus RTU compatible)
t Analog 4-20mA (two-wire, loop powered)
t Selection of SS antennas (horns):
t 4 inch (98mm) diameter SS horn –
for vessels up to 49.2 ft. (15m) tall
t 5 inch (123mm) diameter SS horn –
for vessels up to 98.5 ft. (30m) tall
t Variety of mounting flanges.
t Optional air purge or PFA polymer dust shield for dusty
conditions.
For more detailed information, please contact a Monitor
representative or visit Monitor’s website at
http://www.monitortech.com/radar-level-non-contact-400.shtml
L e ve l Blog - htt p: //m o n it o rt e ch.ty pe pa d. co m
t HMI2 Local Operator Interface Control Console
(For use with “Smart” RS-485 sensor only.)
Scan this with a
smartphone QR-Code app
for more product details.
BULLETIN 363R
Visit www. monitortech.com
s
More product specifications
can be found in #364A
Installation Manual.
SPECIFICATIONS
s
MECHANICALS
DIMENSIONS ARE SHOWN IN INCHES WITH MILLIMETER EQUIVALENT IN BRACKETS
Application:
Bulk Solids / Powders for Vessels up to
UNLESS OTHERWISE STATED
98.5 ft. (30m) High (with 5” Dia. Antenna)
Max. Measurement Range: 4” (98mm) Dia. Antenna: 49.2 ft (15m)
2.68
Unit with 4” (98mm)
68.0
5” (123mm) Dia. Antenna: 98.5 ft (30m)
diameter antenna
4.38
Measurement Accuracy:
±0.39in (±10mm)
111.1
(Shown with “K” style
Ambient Operating Temp.: -40~150° F (-40~65° C)
mounting flange)
Process Temperature:
-40~266° F (-40~130° C)
Process Pressure:
15 psi
7.27
Dead Band:
16” to 30” (406mm to 762mm ) - Antenna Dependent
184.7
(6) .38[9.7]
AIR PURGE
3dB Beam Angle:
4” (98mm) Dia. Antenna: 8°
HOLES ON A
1/8 NPT
7.00 B.C.
5” (123mm) Dia. Antenna: 6°
[177.8]
Weight (Approx.)
with 4” (98mm) Dia. Antenna
7.0 lbs [3.2kg] without flange
11.11±.25
8.00
with 5” (123mm) Dia. Antenna 9.0 lbs [4.1kg] without flange
282.1±6.4
203.2
Frequency Range:
26GHz
Signal Output:
“Smart” RS-485 / Modbus RTU (2-wire);
4-20mA Analog (2-wire, loop powered)
Power:
24VDC (16~26VDC)
LCD:Standard
Housing:
Die cast aluminum,
3.70±.12
ENCLOSURE TYPE 4X, IP66
94.0±3.0
Housing Finish:
Powder Coating
STD UNLESS SPECIFIED
Process Connection:
Gimbal (Swivel)
XX" [XXmm]
Flange Accessories:
K-Flange; 4” ANSI
Dimensions shown represent units with or without dust shield-equipped antennas.
[Stainless
Steel]
Antenna(s):
4” (98mm) Dia.
or
5”
(123
mm)
Dia.
..
Approvals:
CE Mark; TUV Rheinland US/C, Ordinary Loc.
s
Unit with 5” (123mm)
diameter antenna
(Shown with 4” ANSI
mounting flange)
ORDERING INFORMATION
RadarRightTM Non-Contact Radar Level Measurement - Series 400
2.68
68.0
4.38
111.1
1
AIR PURGE 1/8 NPT
2
,
PFA Dust Shield
9.00
228.6
PFA Dust Shield
..
- TUV
US/C
(Pending)
24.28±.25
616.6±6.4
(Suitable flange required)
Optional Flanges and Accessories:
Part #
Description
15-3111
Flange, “K” Style, Aluminum, gimbal/swivel (suitable for 4” and 5” dia. antennas)
15-3114
Flange, 4” ANSI, 316SS, gimbal/swivel (suitable for 4” and 5” dia. antennas)
1-2400
Spanner Wrench For Cover Removal / Tighten
3
R0514-22001 Belden 9322, Cable, Instrumentation, 2-Lead, Shielded 4
R0514-180013 Cable, Instrumentation, 4-Lead, Shielded, 18 AWG 4
17-8021
Power Supply, Universal AC to 24VDC 4
NOTE:
1 Consult Monitor Technologies factory for all applications prior to pricing and issuing quotation.
2 Optional HMI2 Operator Interface is for use with “Smart” RS-485 version only.
3 Cable is not for plenum installations. Consult local electrical
codes and verify compliance before installing.
4 Cable or power supply are not included. Must be ordered separately.
Silo Installation Example
4.80±.12
122.0±3.0
STD UNLESS SPECIFIED
XX" [XXmm]
Dimensions shown represent units with or without dust shield-equipped antennas.
Dust Shield
Information on this sheet
is subject to change
without notice
Display Module
2-Year
Limited
Warranty
MONITOR TECHNOLOGIES, LLC
44W320 Keslinger Road t Elburn, IL 60119 USA
Tel: 1-630-365-9403 t In US/CAN 1-800-766-6486
Fax: 1-630-365-5646 t monitor@monitortech.com
www.monitortech.com
Blog: www.monitortech.typepad.com
HMI2 (optional)
ISO 9001 Registered Quality System
2
CRO
GDR
APR 14 2017
DOC-000-363R
03/17/17
ADV R0006
3.50 x 3.25
A
03/20/17
7.29
185.2
(4)
.75 [19.1]
HOLES ON A
7.50 B.C. [190.5]
ADV R0002
3.50 x 4.25
A
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising