Quick user guide
USING THE HEADSET OR SPEAKER
1) Use the Speaker Button
to turn
speaker ON/OFF.
2) Use the Headset button
to use
the headset once it had been connected.
MAKING A CALL
2) Resume: Resume call by pressing the
transfer the call to another party.
4) Repeat step 1-3 to add the fourth party into
the conference (GXP1630 only).
1) Take Handset/Headset off-hook or press
Speaker button or an available LINE key
Blind Transfer:
Cancel a Conference Call:
1) Press transfer button.
(activates speakerphone) .
2) Dial the number and press the send button to
1) Press “Cancel” soft key in conference
dialing screen to resume the two-way
conversation.
2) The line will have dial tone and the
1) Press hold button
(alternative SIP account).
Attended Transfer:
4) Enter the phone number.
1) Press an idle line key to make a new call and the
active LINE will be placed on hold automatically.
1) Take the phone off-hook.
GXP1610/1615/1620/1625/1628/1630
IP Phone
Quick User Guide
2) Press the SEND button
the “REDIAL” soft key.
©2016 Grandstream Networks, Inc. All rights
reserved.
Reproduction or transmittal of the entire or any
part, in any form or by any means, electronic or
print, for any purpose without the express
written permission of Grandstream Networks,
Inc. is not permitted. Information in this
document is subject to change without notice.
complete transfer of active call.
3) If you wish, select another LINE key
or press
button followed by the LINE button of the held line to
transfer the call.
or press
Note: The phone will redial using the
same SIP account as was used for the last
call.
ANSWERING CALLS
Single Incoming Call:
1) Answer call by taking Handset/Headset
off hook or pressing SPEAKER or by
pressing the corresponding account LINE
button.
Multiple Incoming Calls:
1) When there is a call waiting, users will
hear a Call Waiting tone .
2) The next available line will flash red.
3) Answer the incoming call by pressing its
corresponding LINE button.
4) The current call will be put on hold.
5) Toggle between the calls using the LINE
button.
ENDING A CALL
End a call by pressing the “EndCall” soft key
or hang up the phone.
CALL HOLD/RESUME
1) Hold: Place a call on ‘hold by pressing the
hold button.
to hold the
conference call with all parties are on hold;
2) Once the call is established, press transfer
REDIAL
www.grandstream.com
Assuming that you are in a call and wish to
Hold The Conference:
Grandstream
For detailed information please consult the
GXP1610/1615/1620/1625/1628/1630 User
Manual available at:
CALL TRANSFER
3) When the call is established to the third
party, press the “ConfCall” soft key to initiate 3
-way conference.
corresponding line’s LED will turn green.
5) Press the SEND button
the “#” key.
Basic Phone Operation
corresponding blinking LINE.
2) Press “ReConf” soft key to resume
conference call; or select the corresponding
blinking LINE to speak with an individual party.
End The Conference:
3) After the call is transferred, phone will display idle
screen.
The conference will be terminated for all three
parties if the conference initiator hangs up or
presses “EndCall” soft key.
Auto-Attended Transfer:
VOICEMAIL MESSAGE
1) Set "Auto-Attended Transfer" to "Yes" on Web
GUI.
A blinking red MWI (Message Waiting
Indicator) indicates a message is waiting.
2) Establish one call first.
1) Press the Message button to retrieve the
message. An IVR will prompt the user
through the process of message retrieval.
3) Press transfer key
to bring up a new line,
and the first call will be placed on hold automatically.
4) Dial the number and press SEND button
to make a second call.
5) Press transfer key again to make the transfer.
3-WAY CONFERENCE (4-WAY CONFERENCE for
GXP1630)
Initiate a Conference Call:
Assuming that you are already in a conversation and
wish to bring a third party together in a 3-way
conference.
1) Press conference button
conference dialing screen.
to bring up
2) Dial the third party number followed by SEND key.
2) Press a specific LINE to retrieve messages
for a specific line account.
Note: Each account requires a voicemail
portal number to be configured in the
“voicemail user id” field.
MUTE/DELETE
1) Press the MUTE button
to mute/
unmute the microphone.
2) The Mute icon
indicates whether the
microphone is muted.
VOLUME ADJUSTMENTS
Use the volume button to
adjust the ring volume when the phone is idle.
Press the volume button during an active call
to adjust the call volume.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising