the electronic access control system

the electronic access control system
www.hafele.com.au
the electronic access
control system
Engineered by Häfele
häfele diaLock the electronic access control system / 05.16
Dialock 2016
The electronic access control system
Dialock access control system from Häfele offers touchless locking
and unlocking combined with comprehensive access management in
the hotel industry, the health business, in industrial and office buildings
or in public buildings, from the entrance door to the furniture drawer.
This system has been in a state of continuous further development for
over 20 years. The new generation of Dialock that was introduced at
the Bau trade fair in Munich in 2015 a number of new features. Dialock
makes life easier for the user and for the operator as well, because with
Dialock everything is possible and everything is easy: Easy to configure
(adaptation to every type and size of project). Easy to network (connection
to existing systems). Easy to operate (installation as well as control of
access management). Easy does it (consultation, remote maintenance
and on-site service). Of course Dialock is compatible with the three wellknown transponder technologies “Mifare”, “Legic” and “Tag-IT”.
Dialock from Häfele can unlock everything from doors to cabinets, operate
lifts and vending machines, organise any number of access points and
users in locking plans as well as select and combine technical standards
and functionality. Dialock has the individual answer to any requirement.
Dialock terminals can be operated online (either wired or wireless) or they
can be operated offline. Dialock can be easily networked with your time
and attendance system, building services or billing systems.
Operation is also amazingly easy. The user simply holds the Dialock card
above the terminal without touching it. Access control managers can
ENGINEERED
BY
2
quickly obtain an overview of all locking procedures, organise locking
authorisations with ease and change them in an instant if required. The
high quality of the components assures reliable operation. The all-round
service, including the remote maintenance and the on-site service offers
additional security and piece of mind.
New door terminals with the best price/
performance ratio
The new Dialock door terminals are being launched under the motto
of Dialock “Simply Easy”, and is made easy to use by the customer by
means of wireless solutions and the integration of remote maintenance,
among other things. In addition to the further development of the
software, Häfele presents two new door terminals: The DT 700 as a long
backplate version, and the DT 710 rose and escutcheon version. This
new door terminal generation is characterised by having a well thoughtout system of technology, programming and use of materials combined
with an optimised design.
The DT 700 is a robust standard fitting for interior doors made from
matt stainless steel or polished brass. The DT 710 is a subtle rose and
escutcheon fitting, with possible customised design. Both the DT 700
and the 710 terminals are equipped with an LED indication for locking
/ unlocking and a “Do not disturb” function. Couple those features with
a myriad of different lever handle designs as well as an attractive price/
performance ratio makes the new door terminals particularly interesting.
Dialock Door
Terminals
dialock wall
terminals
Programming and
user keys
Page
Page
Page
For convenient locking and
unlocking of guest room and
interior doors. Battery operated.
Cost effective, in comparison to
wired solutions. Easy installation.
Ideal solution for high usage
openings, automatic doors,
turnstiles, elevators and vending
machines.
Easy programming and encoding
of the Dialock key from your
hotel management system (HMS)
using Dialock software. The
mobile data unit is used once to
communicate access plan to and
when needed, retrieve audit trails
from the doors.
ACCESS CONTROL
contents
06-19 22-35 38-45
smartphone key
That’s how hotels work today:
Simply open the door with your smartphone.
With Dialock, Häfele offers you trendsetting technology. Instead of
handing a room key to your guests only when they arrive at the hotel, the
smartphone key makes arrival much more convenient. The guest receives
access to the hotel and his room via app. No more queues at check-in
and check-out. Guests are happier. In addition to that, you make work
easier for your staff at the reception.
SMARTPHONE KEY:
CONVINCINGLY EASY.
ADDITIONAL SERVICES:
PERFECT FOR YOU AND YOUR GUESTS.
Book a room via the app any time anywhere, check in easily, pay
and check out again without having to go to the reception. Häfele’s
cooperation partners make it possible. They integrate other customized
functions into the app, such as sales-promoting offers of your hotel or
individual travel tips for each destination.
Your guests receive the key code on their app before arrival. That way,
the smartphone becomes the room key. Häfele establishes a secure
communication from the digital room key to the Dialock electronic access
control system using the latest Bluetooth technology. The door opens.
3
häfele diaLock the electronic access control system / 05.16
1
2
The
modular
system
Steel frames, door hardware, electronic
access control system, door leaves and HPL
laminates – individually combined, delivered as a system
1
2
HPL High-Pressure Laminates
Door hardware & access Control
The appearance
The good connections
4
ACCESS CONTROL
3
4
The individual requirements of each hotel project are analysed during project
planning in order to specify the appropriate components and options.
This specification provides a convenient organization for changes during
planning and management of future needs.
3
4
Door leaves
Steel frames
THE central piece
THE PERFECT FRAME
5
häfele diaLock the electronic access control system / 05.16
DT 700 DOOR TERMINAL set
6
ACCESS CONTROL
DT 700 DOOR TERMINAL set
Step 1
Select product model
Step 2
Select product components
Maintenance tools
and batteries
F
Accessories for
processing and
installation
E
Supplementary products
(mounting set)
D
Profile cylinder for
emergency opening
C
Mortice lock*
B
DT 700
Door terminal set
A
! For guest room doors
made from timber (with
“Do not disturb” function)






" For guest room doors
made from metal (with
“Do not disturb” function)






8-9
15
16
18
19
19
!
"
Page no.
Programming and user keys
(For offline use)
ordering product components
38 - 45
Sample order
For interior hotel guest room door, made from timber, flush 42 mm, DIN right, backset 55 mm,
battery-operated door terminal, comfort function outwards opening doors.
A
8-9
917.81.790
15
916.22.701
16
Profile cylinder for mechanical
emergency opening
Single cylinder, keyed different
D
917.64.006
Mortice lock with flanged striking
plate
For doors with standard requirements
stainless steel coloured
C
Page No.
Door terminal set
DT 700 door terminal set, with
thumbturn, stainless steel matt
B
Cat. No.
Supplementary products
Mounting set
917.80.451
18
E
Accessories for processing and
installation (Drilling jig)
917.90.016
19
F
Maintenance tools and batteries
Maintenance tool (Bit Box)
006.37.098
19
Alkaline-maganese battery 1.5 V AA
910.54.980
19
Programming and user keys
–
38 - 45
7
häfele diaLock the electronic access control system / 05.16
DT 700 DOOR TERMINAL set
A for interior doors (hotel guest room doors)
Door terminal set for interior guest room doors, approved for
fire resistant and smoke control doors, matt stainless steel
or polished brass coloured, with fixed lever handle aperture
parts, door backplate internal module with battery.
Functionality
Battery operated, intelligent door terminal, touch-free
activation with Dialock key (passive transponder)
>> Red/white LED’s/Piezo sound generator for indication
of locking and unlocking.
>> Door backplate internal module with thumbturn with
which “Do not disturb” can be indicated on the external
module by flashing signal (thumbturn = DND = “Do not
disturb” function). Mechanical locking takes place by
turning the thumbturn. pushing forward the deadbolt
of the mortice lock.
>> The door can be opened without a key at any time from
the inside by operating the lever handle.
>> Mechanical emergency opening possible.
>> With real-time clock for audit trail of all locking
processes, openings of the housing, emergency
openings and battery removals (memory for up to 1,000
audit trail entries, for up to 1,000 users keys).
>> Tamper protection on internal module blocks the door
terminal in case of removal of the internal backplate.
Access from the outside is blocked for user keys with
activated tamper protection. The tamper protection can
be activated (optional).
>> For service personnel: Indication when battery change
is required.
Advantages
>> Easy mounting
>> Easy battery change
>> Drilling dimensions in accordance with DIN 18251 +
additional drill hole for DND;
>> No cut-outs required in the door leaf
>> Installation with standard rose fixing points
8
Technical data
Degree of protection
IP20
Ambient temperature (operation)
0º to +55º (celcius)
Relative humidity
0 – 95% (not condensed)
Service life of battery
approx. 2 years, generally 10 locking cycles
per day
Backset
65 mm
Spindle
9 mm
Distance
72 mm
Door thickness
35 – 95 mm
Standard
Fire tested to Australian standards A1530.4 and
AS1905.1
Electro-static discharge (ESD)
High level security, tested to 20000 V
(standard 8000 V)
Voltage supply
Alkaline-manganese battery 1.5 V AA (4 pieces)
Notes for operation and installation
Planning by Dialock specialist is required.
DT 700 door terminal modules on fire resistant and smoke control
doors must be installed by Dialock specialists after approval by the
door manufacturer. If the terminal is installed without this permission,
the Fire and Smoke Control Certificate for the door will be invalidated.
Can only be used in combination with the DIN mortice lock for
DT 700. The comfort function is determined with the mortice lock.
Mechanical emergency opening
The DT 700 door terminal set must always be equipped with a short profile
cylinder for mechanical emergency opening. When using the mechanical
emergency opening, please refer to the information sheet for determining
the short profile cylinder length. The batteries in the door backplate internal
module are secured with a special screw in the cover. This is meant to avoid
unauthorised removal of the batteries. To insert the batteries into the internal
module, a special bit is required. Please order separately.
ACCESS CONTROL
Determine lever handle and opening direction
! Internal module
" E
xternal module
(access control)
The opening direction
inwards or outwards
must be selected with
the mortice lock.
§ External module
with lever handle
pointing to the left,
outwards opening,
DIN left mortice lock
$ External module
with lever handle
pointing to the left,
inwards opening,
DIN right mortice lock
% External module
with lever handle
pointing to the right,
inwards opening,
DIN left mortice lock
& External module
with External module
with lever handle
pointing to the right,
outwards opening,
DIN right mortice lock
Supplied with
Stainless
steel, matt
Brass
coloured,
polished
1 external module with fixed lever
handle aperture part
1 internal module with thumbturn and
fixed lever handle aperture part
917.64.006
917.64.257
917.64.051
917.64.258
917.64.008
917.64.259
DT 700 offline
>> Dim. E, door thickness
>> External length C, relevant for profile cylinder and mounting set selection
>> Internal length D, relevant for profile cylinder and mounting set selection
>> Dim. A, external length of profile cylinder
>> Dim. B, internal length of profile cylinder, must not exceed dim. B1
2 square spindles for DND thumbturn are included in the mounting set.
The short square spindle must be used for outwards opening doors, the longer square spindle for
inwards opening doors.
A detailed description of the installation of the square spindles can be found in the installation
instructions.
Order reference:
The following components must also be ordered for a fully operational unit:
>> 1 Mortice lock for DT 700 / DT 710
>> 1 Profile cylinder for mechanical emergency opening
>> 4 Batteries AA (special bit for screw with retaining pin)
>> 1 Angled striking plate, only with mortice locks with 20 mm forend
>> 1 Mounting set
Refer to page 3 for ordering example.
9
häfele diaLock the electronic access control system / 05.16
DT 710 DOOR
TERMINAL set
10
ACCESS CONTROL
DT 710 DOOR TERMINAL set
Step 1
Select product model
Step 2
Select product components
Maintenance tools
and batteries
F
Accessories for
processing and
installation
E
Supplementary products
(mounting set)
D
Profile cylinder for
emergency opening
C
Mortice lock*
B
DT 710
Door terminal set
A
! For guest room doors
made from timber (with
“Do not disturb” function)






" For guest room doors
made from metal (with
“Do not disturb” function)






12 - 13
15
16
18
19
19
Page no.
Programming and user keys
(For offline use)
ordering product components
38 - 45
Sample order
For interior hotel guest room door, made from timber, flush 42 mm, DIN right, backset 55 mm,
battery-operated door terminal, comfort function outwards opening doors.
A
12 - 13
917.81.790
15
916.22.701
16
Profile cylinder for mechanical
emergency opening
Single cylinder, keyed different
D
917.64.000
Mortice lock with flanged striking
plate
For doors with standard requirements
stainless steel coloured
C
Page no.
Door terminal set
DT 710 door terminal set, with thumbturn,
stainless steel matt
B
Cat. no.
Supplementary products
Mounting set
917.80.451
18
E
Accessories for processing and
installation
–
19
F
Maintenance tools and batteries
Maintenance tool
–
19
Alkaline-maganese battery 1.5 V AA
910.54.980
19
Programming and user keys
–
38 - 45
11
häfele diaLock the electronic access control system / 05.16
DT 710 DOOR TERMINAL set
A for interior doors (hotel guest room doors)
Door terminal set for interior guest room doors, approved for
fire resistant and smoke control doors, matt stainless steel
or polished brass coloured, with fixed lever handle aperture
parts, door backplate internal module with battery.
Functionality
Battery-operated, intelligent door terminal, touch-free
activation with Dialock key (passive transponder).
>> Red/white LEDs/Piezo sound generator for indication
of locking and unlocking.
>> Door backplate internal module with thumbturn
with which “Do not disturb” can be indicated on the
external module by a flashing signal (thumbturn = DND
= “Do not disturb” function). Mechanical locking takes
place by turning the thumbturn, pushing forward the
deadbolt of the mortice lock.
>> The door can be opened without a key at any time
from the inside by operating the lever handle.
>> Several keys per room and up to 20 keys per door
terminal possible.
>> Mechanical emergency opening possible.
>> With real-time clock for audit trail of all locking
processes, openings of the housing, emergency
openings and battery removals (memory for up to
1,000 audit trail entries, for up to 1,000 user keys).
>> Tamper protection on internal module blocks the door
terminal in case of removal of the internal backplate.
Access from the outside is blocked for user keys with
activated tamper protection. The tamper protection
can be activated (optional).
>> For service personnel: Indication when battery change
is required.
Advantages
>> Easy mounting
>> Easy battery change
>> Drilling dimensions in accordance with DIN 18251 +
additional drill hole for DND; no cut-outs required in
the door leaf
>> Installation with standard rose fixing points
12
Technical data
Degree of protection
IP20
Ambient temperature (operation)
0º to +55º (celcius)
Relative humidity
0 – 95% (not condensed)
Service life of battery
approx. 2 years, generally 10 locking cycles
per day
Backset
65 mm
Spindle
9 mm
Distance
72 mm
Door thickness
35 – 95 mm
Standard
Fire tested to Australian standards A1530.4 and
AS1905.1
Electro-static discharge (ESD)
High level security, tested to 20000 V
(standard 8000 V)
Voltage supply
Alkaline-manganese battery 1.5 V AA (4 pieces)
Notes for operation and installation
Planning by Dialock specialist is required.
DT 710 door terminal modules on fire resistant and smoke control
doors must be installed by Dialock specialists after approval by the
door manufacturer. If the terminal is installed without this permission,
the Fire and Smoke Control Certificate for the door will be invalidated.
Can only be used in combination with the DIN mortice lock for
DT 710. The comfort function is determined with the mortice lock.
Mechanical emergency opening
The DT 710 door terminal set must always be equipped with a short profile
cylinder for mechanical emergency opening.
When using the mechanical emergency opening, please refer to the
information sheet for determining the short profile cylinder length. The
batteries in the door backplate internal module are secured with a special
screw in the cover. This is meant to avoid unauthorised removal of the
batteries. To insert the batteries into the internal module, a special bit is
required. Please order separately.
ACCESS CONTROL
Determine lever handle and opening direction
! Internal module
" E
xternal module
(access control)
The opening direction
inwards or outwards
must be selected with
the mortice lock.
§ External module
with lever handle
pointing to the left,
outwards opening,
DIN left mortice lock
$ External module
with lever handle
pointing to the left,
inwards opening,
DIN right mortice lock
% External module
with lever handle
pointing to the right,
inwards opening,
DIN left mortice lock
& External module
with External module
with lever handle
pointing to the right,
outwards opening,
DIN right mortice lock
Supplied with
Stainless
steel, matt
Brass
coloured,
polished
1 external module
1 rose with fixed lever handle
aperture part
1 internal module with thumbturn and
fixed lever handle aperture part
917.64.000
917.64.251
917.64.001
917.64.252
917.64.002
917.64.253
DT 710 offline
>> Dim. E, door thickness
>> External length C, relevant for profile cylinder and mounting set selection
>> Internal length D, relevant for profile cylinder and mounting set selection
>> Dim. A, external length of profile cylinder
>> Dim. B, internal length of profile cylinder, must not exceed dim. B1
2 square spindles for DND thumbturn are included in the mounting set. The short square spindle must
be used for outwards opening doors, the longer square spindle for inwards opening doors. A detailed
description of the installation of the square spindles can be found in the installation instructions.
Order reference:
The following components must also be ordered for a fully operational unit:
>> 1 Mortice lock for DT 700 / DT 710
>> 1 Profile cylinder for mechanical emergency opening
>> 4 Batteries AA (special bit for screw with retaining pin)
>> 1 Angled striking plate, only with mortice locks with 20 mm forend
>> 1 Mounting set
Refer to page 7 for ordering example.
13
häfele diaLock the electronic access control system / 05.16
DT 700 and 710 DOOR TERMINAL
individual components: dt 700 and dt 710
>>
>>
>>
Material: Stainless steel
Finish: Matt or Brass coloured polished
Version:Identical to the DT 700 and DT 710 door terminal modules, but divided into internal and external module
Supplied with
Model
series
Stainless
steel, matt
Brass
coloured,
polished
1 external module
with fixed lever handle
aperture part
DT 700
917.63.500
917.63.501
917.63.505
917.63.506
917.63.510
917.63.511
917.63.600
917.63.601
917.63.605
917.63.606
917.63.610
917.63.611
917.63.000
917.63.001
917.63.005
917.63.006
917.63.010
917.63.011
DT 700 and 710 offline
1 external module
with fixed lever handle
aperture part
1 internal module
with thumbturn and fixed
lever handle aperture part
14
DT 710
DT 700
and
DT 710
ACCESS CONTROL
DT 700 and 710 Door terminal
B mortice locks
>>
>>
>>
>>
>>
>>
>>
>>
>>
Installation
Area of
application: For flush doors (forend 24 mm),
suitable for fire resistant and
smoke control doors
Version: Electrically connectable mortice
lock with feedback (sensors for
latchbolt), comfort function and
emergency opening function,
deadlocking latchbolt, connecting
cable for electrical connector and sensors for connection
with DT 700 or DT 710 internal
module
Closure: Prepared for profile cylinder
Forend: Square
Lever follower: 9 mm
Distance: 72 mm
Mounting: DIN left and DIN right hand
Material:
Forend: Stainless steel, latchbolt and
lock case: Steel, lever follower:
Malleable cast
Finish: Matt, lock case: Black
Emergency opening function
Emergency opening function is monitored (feedback).
Opening of door from inside: By activitating the lever
handle, the latchbolt is retracted.
Door routing dimensions
Observe the lock pocket dimensions.
Dimension ! in drawing is greater than with
normal mortice locks due to the cable outlet.
Forend width (mm)
Door drilling dimensions
*8 mm drill hole on one
side for DND spindle,
only on the inside.
Mounting
Cat. No.
DIN LH, comfort function outwards opening doors
917.81.780
DIN LH, comfort function inwards opening doors
917.81.760
DIN RH, comfort function outwards opening doors
917.81.790
DIN RH, comfort function inwards opening doors
917.81.770
Backset A 65 mm
24
Determine lever handle and opening direction
! Internal module
" E
xternal module
(access control)
The opening direction
inwards or outwards
must be selected with
the mortice lock.
§ External module
with lever handle
pointing to the left,
outwards opening,
DIN left mortice lock
$ External module
with lever handle
pointing to the left,
inwards opening,
DIN right mortice lock
% External module
with lever handle
pointing to the right,
inwards opening,
DIN left mortice lock
& External module
with External module
with lever handle
pointing to the right,
outwards opening,
DIN right mortice lock
15
häfele diaLock the electronic access control system / 05.16
DT 700 / 710 DOOR TERMINAL
C Profile cylinder for emergency opening
>>
>>
>>
Version: S1 keyed alike
Material: Cylinder housing: Brass, key: Steel
Finish: Cylinder housing and key: Nickel
plated
Dim. B (mm)
Dim. A (mm)
Startec single cylinder
DT 700Reader module
DT 710 Reader module with blank
escutcheon foil
DT 710 Reader module with PC
escutcheon foil
Dim. C (mm) comfort function
Inwards opening
Outwards opening
Inwards opening
Outwards opening
Inwards opening
Outwards opening
Startec single cylinder
27
10.6 – 15
12.6 – 17
18.5 – 26
20.5 – 28
11 – 16
13 – 18
31
10
14.6 – 19
16.6 – 21
22.5 – 30
24.5 – 32
15 – 20
17 – 22
35
18.6 – 23
20.6 – 25
26.5 – 34
28.5 – 36
19 – 24
21 – 26
40
23.6 – 28
25.6 – 30
31.5 – 39
33.5 – 41
24 – 29
26 – 31
45
28.6 – 33
30.6 – 35
36.5 – 44
38.5 – 46
29 – 34
31 – 36
50
33.6 – 38
35.6 – 40
41.5 – 49
43.5 – 51
34 – 39
36 – 41
55
38.6 – 43
40.6 – 45
46.5 – 54
48.5 – 56
39 – 44
41 – 46
60
43.6 – 48
45.6 – 50
51.5 – 59
53.5 – 61
44 – 49
46 – 51
65
48.6 – 53
50.6 – 55
56.5 – 64
58.5 – 66
49 – 54
51 – 56
70
53.6 – 58
55.6 – 60
61.5 – 69
63.5 – 71
54 – 59
56 – 61
Dim B. max. = dim. D – 2 mm
Version
Dim. A (mm)
Cat. No.
27
916.22.701
31
916.22.702
35
916.22.703
40
916.22.704
45
916.22.705
50
916.22.706
Startec single cylinder
S1 keyed alike
Supplied with:
>> 1 Single cylinder
>> 3 Keys
>> 1 Fixing screw
16
ACCESS CONTROL
DT 710 DOOR TERMINAL
D Supplementary products
Escutcheon foil for reader module
>>
>>
>>
Without aperture (Blank)
Area of application: Cover foil for sticking onto DT 710
reader module
Material: Plastic
Colour: Grey or white
Apertures
Colour
Cat. No.
Blank
Grey
917.80.424
White
917.80.425
PC
Grey
917.80.420
White
917.80.421
Order reference:
Customised design of the escutcheon foil is available on request
(minimum order quantity of 50 pieces). Please enquire.
With Profile Cylinder aperture (PC)
Spacer plate for reader module
q53±0.2
3
>>
>>
>>
Area of application: For compensation with thin door
panels
Thickness: 3.0 mm
Material: Stainless steel
Technical Data
DT 710 reader module with blank escutcheon foil
Dim.A (mm)
Compensation with spacer plate
A spacer plate 3 mm can be used
to compensate for thin doors
(optional). The max. possible
cylinder dimension (dim. A) is
then increased by 3 mm. The
min. cylinder dimension (dim. A)
remains the same when using the
blank escutcheon foil, when
using the PC escutcheon foil it is
increased by 3 mm.
Dim B. max. = dim. D – 2 mm
Dim.B (mm)
Dim.C (mm)
Comfort function
inwards opening
doors
Dim.C (mm)
Comfort function
outwards
opening doors
Single cylinder (e.g. 916.22.701)
27
10
15.5 – 26
17.5 – 28
Material
Colour
Cat. No.
Stainless steel
Matt
917.90.484
Brass coloured polished
917.90.485
Reader module with spacer plate 3 mm
17
häfele diaLock the electronic access control system / 05.16
mounting set
>>
>>
Functionality:For connecting the external and internal mode and thumbturn with the mortice lock.
Material:Steel, threaded screws: Stainless steel
Note:
Mounting sets 1, 2, 4, 6, 7, 9 and 11 are supplied with 2 DND spindles. The installation
instructions explain which spindle has to be used.
Supplied with:
>> 4 Cylinder screws M4, SW 3 hexagon socket, with retaining pin
>> 2 Spindles 9 mm
>> 1 (2) DND spindle(s) 5 mm
>> 2 Chipboard screws 3 x 25 mm
Dim. E (mm)
Mounting Set
Dim. C (mm)
Dim. D (mm)
Stainless
steel
matt
brass
coloured
polished
Door thickness 35 – 50
Mounting set 1
14 – 35
14 – 35
917.80.451
917.80.471
Door thickness 50 – 65
Mounting set 2
15 – 35
15 – 35
917.80.452
917.80.472
Mounting set 3
35 – 50
14 – 25
917.80.453
917.80.473
Door thickness 65 – 80
Door thickness 80 – 95
18
Mounting set 4
14 – 25
35 – 50
917.80.454
917.80.474
Mounting set 5
50 – 65
14 – 25
917.80.455
917.80.475
Mounting set 6
35 – 50
15 – 35
917.80.456
917.80.476
Mounting set 7
15 – 35
30 – 50
917.80.457
917.80.477
Mounting set 8
14 – 25
50 – 65
917.80.458
917.80.478
Mounting set 9
50 – 70
14 – 30
917.80.459
917.80.479
Mounting set 10
50 – 65
25 – 40
917.80.460
917.80.480
Mounting set 11
30 – 50
30 – 50
917.80.461
917.80.481
Mounting set 12
30 – 40
50 – 60
917.80.462
917.80.482
Mounting set 13
15 – 30
50 – 65
917.80.463
917.80.483
ACCESS CONTROL
DT 700 and 710 DOOR TERMINAL
F processing and installation
drilling jig
>>
Area of application: For work preparation for mounting the
DT 700 / DT 710 door terminals on door
Installation:
Information on how to use the drilling jig can be found in the
installation instructions for the DT 700 / DT 710.
The installation instructions can be found in our website:
www.hafele.com.au
Cat. No.
Drilling jig
917.90.016
Supplied with:
>> 2 Steel plates (inside and outside)
>> Centring pins with stop sleeves
>> 1 Drill bit 13mm
>> 1 Drill bit 8 mm
>> 1 Router bit
Bit box
battery aa
>>
>>
>>
>>
Area of application: For mounting the DT 700 / DT 710 door terminal, for SW 3 hexagon socket screws with retaining pin and PH2 screws
Length: 25 mm
Drive: 1/4”
Operating
temperature: -18 to +55ºC with alkaline-manganese,
Alkaline-manganese battery 1.5 V AA
Packing
(piece)
Cat. No.
4
910.54.980
Cat. No.
Bit Box
006.37.098
Supplied with:
>> 1 Universal magnetic holder
>> 6 Bits for SW 3 hexagon socket screws with drill hole for
retaining pin
>> 4 PH2 bits
19
häfele diaLock the electronic access control system / 05.16
door hardware
opening your
business
at a glance
Functional and reliable hardware to support, hinge, control
or lock building components are essential for the efficient
function of buildings of all types, from retail stores to office
buildings, from hotels to residential developments, from hospitals
to airports.
Häfele’s comprehensive range of fittings contained in the new
Door Hardware Catalogue covers more than 200 pages, and
present a large range of hardware offering the best possible
solutions for maximum functionality and reliability, all backed by
Häfele’s limited lifetime warranty.
Products from trusted brands like GEZE and Lorient as well as
Häfele’s own Startec branded products can be found with in the
new Door Hardware Catalogue.
For more information about the complete range of door hardware
from Häfele, please visit www.hafele.com.au and download the
latest version of the Door Hardware Catalogue.
20
ACCESS CONTROL
Hygienically
active handles
The Alasept invisible anti-bacterially effective surface coating
ensures that bacteria and germs have no chance in the hotel.
Certified safety
>
>
>
>
>
>
Alasept provides protection where
people are entering and leaving.
Alasept reduces germs.
Alasept works 24/7.
Alasept promotes your image.
Alasept for stainless steel fittings
is neutral in colour.
Alasept is robust and scratch-resistant.
Ask for your
local Häfele
representative
for More
information
Alasept for door terminals
and furniture fittings.
With anti-bacterial effectiveness of 99.9%, Alasept is very similar to a
surface disinfectant. The coating is based on the oldest metal known
to mankind: Copper. The copper substrate kills bacteria and viruses
immediately. Germs cannot colonise fittings coated with Alasept.
Particularly in hygiene-sensitive areas, you minimise the risk of
transmitting germs with Alasept. This is for the benefit of all guests and
staff in your hotel. This is the case in the world’s first “Alasept hotel”,
the ibis Styles Nagold-Schwarzwald hotel in Nagold, Germany. This
hotel was equipped with door fittings with the anti-bacterially effective
Alasept coating in November 2012.
The anti-bacterially effective Alasept coating for fittings from Häfele is
the first solution of its kind on the market and was tested and certified
in accordance with ISO 22196 in 2011. Certification took place at the
independent test institute Hohenstein Laboratories GmbH & Co. KG,
and was confirmed for two additional years in 2013. Many different
stainless steel fittings such as door, window and furniture handles
and architectural hinges can be enhanced with the patented coating
procedure. And provide additional hygiene in the hotel. More information
can be found at www.alasept.de
Hotel ibis Styles Nagold-Schwarzwald, Nagold, Germany
21
häfele diaLock the electronic access control system / 05.16
Wall terminals
22
ACCESS CONTROL
wt 200 wall terminal set
ordering product components
EN 1125
–
" For guest room doors made
from metal (with “Do not
disturb” function)
EN 179
EN 1125
Page no.
C
Installation
accessories
D






Programming and user keys
(For offline use)
EN 179
B
Automatic circuit
breakers and
relays
–
! For external doors made from
timber, metal, glass or narrow
frames
A
ESS 100 energy
control terminal
Select product components
Power supply
Step 2
WTC 200 controller
Select product model
WRU 200
wall reader
Step 1
Doors with requirements on fire resistance/smoke control, EN 179 or EN 1125
are possible if the door structure also meets the respective requirements.






Doors with requirements on fire resistance/smoke control, EN 179 or EN 1125
are possible if the door structure also meets the respective requirements.
24
25 - 26
30 - 31
29
32
35
38 - 45
Sample order
Entrance door
projects, mains-operated wall terminal
Cat. No.
Page No.
WT 200 Wall terminal set
A
WRU200 Wall reader
917.91.072
24
B
WTC 200 Controller
917.91.071
25
C
Power supply
DC power supply unit, regulated
917.93.013
30 - 31
Automatic circuit breakers and relays
–
32
Installation accessories
–
35
D
Optional
Automatic circuit breakers, relays and installation accessories as required
Energy control terminal for hotels, additional wall reader on opposite side as required
23
häfele diaLock the electronic access control system / 05.16
WRU 200 Wall READER
A for indoor and outdoor use
WRU 200 wall reader (writer and reader unit) plastic,
anthracite/silver coloured, for combination with WTC 200
controller.
Functionality:
Mains-operated wall terminal, touch-free activation
with Dialock key.
>> Red/green LEDs for indication of locking and
unlocking.
>> For service personnel: Indication of operating status
(e.g. offline).
Technical data
Degree of protection
IP65
Ambient temperature (operation)
–25º to +70° (Celcius) with temperature
monitoring
Voltage supply
12 – 24 V DC ±15%
Current consumption
0.8 W
RFID
f = 13.56 MHz
Indication
1 x LED red, 1 x LED green
Interface
1 x RS-485, automatic baud rate detection
Relative humidity
10 – 95% (not condensed)
Connection
Terminals for e.g. J-Y(St) Y2x2x0.8, max. 100m
Notes for operation and installation
Connection between WRU 200 wall reader and WTC 200 controller with four
core installation cable in compliance with VDE 0815:
Type J-Y(St)Y 2 x 2 x 0.8 mm (twisted pair, shielded), max. length 100 m
(please contact Dialock specialist for other lengths).
Installation of wall reader in flush mounted box with 2 device fastening screws
(distance 60 mm in compliance with DIN).
Make sure the fastening points on the flush mounted box are horizontal.
Minimum distance between 2 wall readers 250 mm.
The installation of the wall reader in metal surroundings must be planned.
Order reference:
Please order supplementary and optional
components, e.g. energy control terminal, power
supply and lock, separately.
Cat. No.
917.91.072
Supplied with:
>> 1 WRU 200 wall reader
24
ACCESS CONTROL
wtc 200 controller
B for indoor and outdoor use
WTC 200 Controller
made from plastic, anthracite/silver coloured,
for combination with WRU 200 wall reader.
Functionality
Mains-operated, intelligent controller for online operation.
>> Use as authorisation writer and/or wall terminal, block
lock function.
>> Selective control of up to 2 electrical devices.
>> Plug & Play installation, configures all system
parameters on an SD card using the software.
>> Authorisation writer for updating authorisations at
offline terminals.
>> Indication of operating status in the Dialock 2.0
software.
>> Just-in-time modifications of authorisations.
>> With integrated real-time clock for programming time
restricted locking authorisations (setting of time zones)
>> With audit trail of all processes.
>> With 4 input ports for analysing input signals (e.g. reed
>> contact for door monitoring). In combination with
electric strike or mortice lock with feedback contact,
this allows visual overall monitoring the status of the
locking system.
>> Change configurations and update firmware online
with the Dialock 2.0 software.
Options (please order separately)
>> WTX 200 I/O expansion module with 3 relay output
ports and 4 analogue input ports.
>> 8-way relay module with 8 relay output ports and
1 analogue input port.
Technical data
Degree of protection
IP30 (sheet steel housing),
installation on hat rail depends on housing
Ambient temperature (operation)
0° to +50° (Celcius)
Voltage supply
12 – 24 V DC ±15%
Current consumption
1.5 W
CPU
32 bit 168 MHz Cortex M4
Interfaces
1 x Ethernet 10/100 Mbit/s
3 x RS-485 interfaces with power supply
2 x relay output ports
(changeover contact 30 V/2 A)
4 x analogue input ports
1 x USB interface
Slot
For WTX 200 I/O expansion
Storage media
1 x micro SD card
(with optional 128 bit SSL encryption)
512 kB flash
128 KB SRAM
Relative humidity
10 – 95 % (not condensed)
Connection
Screw terminals 2.5 mm2
Installation
on hat rail
Width 165 mm, height 130 mm, depth 65 mm
in sheet steel
housing
Width 300 mm, height 300 mm, depth 132 mm
Notes for operation and installation
Connection between WRU 200 and WTC 200 controller with four core
installation cable in compliance with VDE 0815:
Type J-Y(St)Y 2 x 2 x 0.8 mm (twisted pair, shielded), max. length 100 m
(please contact Dialock specialist for other lengths).
Order reference:
Please order supplementary and optional components,
e.g. energy control terminal, power supply and lock, separately.
Cat. No.
917.91.071
Supplied with:
>> 1 WTC 200 Controller
25
häfele diaLock the electronic access control system / 05.16
wtx 200 i/o
for expansion of wtc 200 controller
Technical data
Ambient temperature (operation)
0º to +50° (Celcius)
Voltage supply
12 – 24 V DC ±15%
Current consumption
1.5 W
CPU
32 bit 168 MHz Cortex M4
Interfaces
3 x relay output ports (changover contact 30
V/2 A)
4 x analogue input port
Connection
Screw terminals 2.5 mm2
Mounting
On slot for WTC 200
Functionality
Mains-operated, intelligent controller for online operation.
>> Connection of up to 4 monitoring contacts.
>> Connection of up to 2 electric strikes (relays).
>> Combined connection of monitoring contacts and
electric strikes to up to 6 pins.
>> Up to 3 relay contacts for electric strikes or for
signalling the door status.
Cat. No.
917.91.073
wtx 201 8-way relay module
for expansion of wtc 200 controller
Technical data
Degree of protection
Depends on housing
Ambient temperature (operation)
0° to +50° (Celcius)
Voltage supply
12 – 24 V DC ±15%
Interfaces
3 x changeover contact 30 V/2 A
5 x make/break conact (relay)
1 x RS-485
1 x analogue input port
WTX 201 8-way relay module,
as independent unit that can be installed remotely
from the WTC 200 controller, e.g. as lift control.
Functionality
Mains-operated, intelligent controller for online operation.
>> Connection of up to 3 changeover contacts, 5 make
or break contacts (relay).
>> RS-485 input ports for connection with WTC 200
controller.
>> One RS-485 interface on the WTC 200 can be used
for operating up to 4 WTX 201.
26
Relative humidity
10 – 95% (not condensed)
Connection
Screw terminals 2.5 mm2
Cat. No.
917.91.074
ACCESS CONTROL
wt 210 wall terminal set
ordering product components
EN 1125
–
" For guest room doors made
from metal (with “Do not disturb”
function)
EN 179
EN 1125
Page no.
D





Programming and user keys
(For offline use)
EN 179
C
Installation
accessories
–
! For external doors made from
timber, metal, glass or narrow
frames
A
Automatic circuit
breakers and
relays
Select product components
ESS 100 energy
control terminal
Step 2
Power supply
Select product model
WT 210 wall terminal,
(wall reader and
controller, as on unit).
Step 1
Doors with requirements on fire resistance/smoke control, EN 179 or EN 1125
are possible if the door structure also meets the respective requirements.





Doors with requirements on fire resistance/smoke control, EN 179 or EN 1125
are possible if the door structure also meets the respective requirements.
28
30 - 31
29
32
35
38 - 45
Sample order
Cat. No.
Page No.
917.91.007
28
DC power supply unit, regulated
917.93.013
30 - 31
Automatic circuit breakers and relays
–
32
Installation accessories
–
35
Entrance door
projects, mains-operated wall terminal
A
Wall terminal set
WT 210 wall terminal
C
D
Power supply
Optional
Automatic circuit breakers, relays and installation accessories as required
Energy control terminal for hotels, additional wall reader on opposite side as required
27
häfele diaLock the electronic access control system / 05.16
wt 210 Wall READER
A for indoor and outdoor use
Space required flush
mounted box
WT 210 wall terminal (reader unit and controller in one
compact unit) made from plastic, anthracite/silver coloured.
The compact design of the WT 210 allows for installation in
flush mounted boxes or cavity wall boxes.
>>
Area of application: For controlling car park barriers, gates, any type of door, furniture and furnishings, lights,
alarm systems, video surveillance.
Functionality
Mains-operated wall terminal, for offline operation.
>> Red/green LEDs for indication of locking and
unlocking.
>> The WT 210 forms a complete offline access point in
combination with an electric strike.
>> The digital input port can be used for connecting a
push button inside that activates the electric strike, for
example.
>> With integrated real-time clock for programming time
restricted locking authorisations (setting of time zones).
>> With sabotage sensor that triggers the integrated
signal generator and activates the alarm relay when
removing the reader head from the installation frame.
>> The alarm relay can also be combined with one further
relay (in the protected (indoor) areas) in order to
achieve a tamper-resistant access point.
>> With audit trail of all locking processes and removing
the reader head from the installation frame processes.
>> Wireless firmeware update with the MDU 110.
Technical data
Degree of protection
IP65
Ambient temperature (operation)
–25° to +70° (Celcius) with temperature
monitoring
Relative humidity
10 – 95% (not condensed)
Voltage supply
12 – 24 V DC ±15%
Current consumption
0.8 W
RFID
f = 13.56 MHz
Indication
1 x LED red, 1 x LED green, Piezo sound
generator
Interface
Digital input port:
Switching input max. 20 mA
Relay output port (change over contact):
48 V AC/DC, 5 A
Alarm output port (make contact): 48 V DC, 1 A
Rf interface for configuration with MDU 110
Memory
For up to 1,000 audit trail entries, for up to
1,000 keys
Terminals
0.13 – 0.52 mm2
Notes for operation and installation
Installation of wall reader in flush mounted box with 2 device fastening screws
(distance 60 mm in compliance with DIN).
Make sure the fastening points on the flush mounted box are horizontal.
Minimum distance between 2 wall readers 250 mm.
The installation of the wall reader in metal surroundings must be planned.
Order reference:
Please order supplementary and optional components,
e.g. energy control terminal, power supply and lock, separately.
Cat. No.
917.91.007
Supplied with:
>> 1 WT 210 wall terminal
28
ACCESS CONTROL
dialock wall terminal
D Supplementary products
energy control terminal
A
B
Technical data
Power supply (output current)
30 A, AC 60/50 HZ,
110 V (or 220 V)
Total consumption
6,600 W
Own consumption
<0.2 W
Particularly suitable for use in hotels for activating electrical
loads in guest rooms such as lighting, TV, sockets, air
conditioning. Housing made from plastic, white or silver
coloured.
Service life
>100,000 unlocking cycles (when using contact
maker below 220 V and full load)
Operating temperature
–10° to +60° (Celcius)
Relative humidity
10 – 95%
Functionality
Mains-operated wall terminal, for offline operation.
>> Activation of electric circuits and switching of electrical
devices by means of Dialock keys with ISO credit card
size via integrated switching contact. Activation as
long as a transponder card is inserted in the hold of
the energy control terminal.
>> The inserted card is recognised as transponder and
read out. Every card is authorised.
>> Red LED
Ambient temperature
(transport/storage)
–20° to +80º (Celcius)
Time delay
15 seconds
Technology
Mifare Classic
Order reference:
Device box not supplied, please order separately.
Colour
Cat. No.
White
917.61.082
Silver coloured
917.61.083
Supplied with:
>> 1 energy control terminal
>> 1 hold
>> Fixing material
29
häfele diaLock the electronic access control system / 05.16
dialock wall terminal
C Supplementary products
DC power supply unit, regulated
>>
>>
>>
Rechargeable battery pack for emergency
power supply
Area of application:Power supply for wall terminal set,
electric strike and motor lock
Version:Suitable for permanent operation,
short-circuit proof
Installation:For installation in distributor on hat rail
Technical data
Input voltage
100-240 V AC
Output voltage
12 V DC
>>
A
2A
>>
B
4A
A
<40º (Celcius)
Output current
Operating temperature
Hat rail installation M36
rail technology
B
<50º (Celcius)
A
2 joint units
B
4 joint units
Note:
Installation and commissioning must be carried out by a
qualified electrician.
>>
Area of application:Low-cost power supply for e.g. wall
terminal set, electric strike, motor lock
Version:Hermetically sealed lead battery
pack with 12 V (4Ah), suitable for
permanent operation, maintenance
free, a second terminal is provided on
the battery pack for connecting the
load
Installation:For installation in distributor on hat rail
Technical data
Input voltage
12.8 V DC
Output voltage
12 V DC
4 Ah
Version
Width (mm)
Cat. No.
Capacity
A
36.1
917.93.013
Nominal capacity (example)
120 W, for 10 min
917.93.012
Operating temperature
≤40º (Celcius)
Hat rail installation M36 rail
technology
9 joint units
Service life
approx. 5 years
(ambient temperature 20 ºC)
Self-discharge
approx. 3% per month
(ambient temperature 20 ºC)
B
72
Supplied with:
>> 1 DC power supply unit
>> 1 Wall installation set
>> 1 Snap-on cover
Installation:
For use in combination with 12 V DC power supply unit
(e.g. Cat. No. 917.93.013).
The output voltage of the DC power supply unit must be increased to
13.8 V DC, power consumption of the battery pack is then + 500 mA
(load capacity).
The battery pack must be connected between power supply unit and
consumer.
Note:
Installation and commissioning must be carried out by a
qualified electrician.
30
Width (mm)
Cat. No.
160
917.93.019
ACCESS CONTROL
dialock wall terminal
D Supplementary products
DC power supply unit, unregulated
>>
>>
>>
Time delay relay
Area of application:Power supply for wall terminal set,
electric strike and motor lock
Version:Suitable for permanent operation, not
short circuit proof
Standard:In compliance with EN, VDE, UL, CSA
>>
>>
Technical data
Input voltage
230/115 V AC
Output voltage
12 V DC
Output current
3A
Operating temperature
-20º to +80º (Celcius)
WxDxH
50 x 92 x 95 / 75 mm
Hat rail installation M36 rail
technology
3 joint units
Note:
Installation and commissioning must be carried out by a
qualified electrician.
Width (mm)
Cat. No.
55
911.68.004
Area of application:In combination with the ESS energy
control terminal
Functionality:Delayed switching off of connected
load, when the control contact is
closed, the normally open contact is
also closed. After opening the control
contact, the normally open contact
remains closed during the delay time.
Technical data
Nominal contact rating
10 A/250 V AC
Voltage supply
8 - 230 V AC/DC
Delay time
0 - 10 min
Note:
Installation and commissioning must be carried out by a
qualified electrician.
Cat. No.
910.51.900
31
häfele diaLock the electronic access control system / 05.16
dialock wall terminal
D Supplementary products
Automatic circuit breaker
>>
>>
>>
>>
>>
Installation control relay
Area of application:For protection of the electric circuit of
wall terminals
Material:Housing: Plastic
Colour:Housing: Grey
Installation:For installation in distributor on hat rail
Standard:In compliance with DIN VDE 0641-11
for line protection
Technical data
Control current
5A
Hat rail installation M36 rail
technology
1 joint unit
Note:
Installation and commissioning must be carried out by a
qualified electrician.
Cat. No.
910.51.993
32
>>
>>
>>
>>
Area of application:For switching voltages > 60 V
Material:Housing: Plastic
Colour:Housing: Grey
Installation:For installation in distributor on hat rail
Technical data
Control voltage
8-230 V UC
Nominal contact rating
16 A/250 V AC (change over
contact)
Hat rail installation M36 rail
technology
1 joint unit
Note:
Installation and commissioning must be carried out by a
qualified electrician. Observe correct polarity with direct current
control.
Cat. No.
910.51.994
ACCESS CONTROL
dialock wall terminal
D Supplementary products
Power supply unit, regulated
Cable transition
>>
>>
>>
>>
Area of application:Power supply for wall terminals
Version:Suitable for permanent operation,
short-circuit proof
Installation:Suitable for installation in flush
mounted device box
Standard:Conforms to EN 60 950, EN 55 022/B
Technical data
>>
>>
>>
>>
Area of application:For current transfer from door frame
to door, for cable Ø 7 mm, suitable for
installation in wooden, plastic or metal
doors
Installation:Concealed, in door frame or in door
leaf (optional)
Length:Flexible hose <110 mm
Material:Screw-on holder and hose:
Stainless steel
Flexible hose
length (mm)
Cat. No.
Cable transition
110
912.02.029
Mounting set for wooden doors
-
912.02.045
Cable transition
>>
>>
>>
>>
Input voltage
155 mm
Cable length
90 mm
Output current
0.5 A
Operating temperature
-10 ºC to +40 ºC
Note:
Only suitable for power supply to wall terminals.
For other devices (e.g. electric strike) a separate power supply
is required. Installation and commissioning must be carried out
by a qualified electrician.
Cat. No.
Power supply unit
917.93.010
Supplied with:
>> 1 DC direct current power supply unit with screw
terminals.
Area of application:For current transfer from door frame
to door, for pulling flexible cable up to
Ø 7 mm through
Installation:Visible
Material:Flexible hose: Rust-proof metal,
screw-on holder: Plastic
Finish:Screw-on holder: Nickel plated
Cable transition
Flexible hose
length (mm)
Cat. No.
180
912.02.095
300
912.02.097
33
häfele diaLock the electronic access control system / 05.16
dialock wall terminal
D Supplementary products
PS 1 and PS 2 Power supply unit
Adapter cable AMP/bare
>>
>>
>>
Area of application:For supplying power to furniture
terminals, wall terminals and multilock adapters
Version:Plug-in connection to output cable
with AMP plug (3-way AMP plug) on
output port
>>
>>
Area of application:For connecting the WT wall terminal
or other devices with AMP socket to
the PS 1/PS 2 power supply units
Version:With AMP plug and wire end sleeves,
with plastic sheathing HO3VVH2-F
Colour:Black
Technical data
Technical data
Cable length
250 mm
Input voltage
100-240 V AC, 50-60 Hz
Power
12 V, 6 A
Output voltage
12 V DC, regulated
Plastic sheathing
2 x 0.75 mm2
Relative
0 - 95% (not condensed)
Mains lead length
1800 mm
Cat. No.
Output cable length
1350 mm
823.28.310
Approvals
ACMA, CE, FCC, LPS, TÜV/
GS, UL
Operating temperature
0-50º (Celcius)
Supplied with
> 1 PS 1 or PS 2 power supply unit
> 1 Mains lead with Australian plug
> 1 Supplementary sheet “Safety instructions”
Output
current A
Dim. (L x W x H)
(mm)
Cat. No.
PS 1 power
supply unit
2.5
105 x 42 x 30
237.58.147
PS 2 power
supply unit
5
115 x 52 x 30
237.58.148
Order references
For countries where a cable with DIN Schuko safety plug cannot be
used, a cable in accordance with the national standard is available
on request.
34
ACCESS CONTROL
dialock wall terminal
D Supplementary products
Cavity wall box
Device box
For flush mounting
>>
>>
>>
Version:Dimensions according to DIN
standard
Material:Plastic
Colour:Black
>>
>>
>>
>>
>>
Area of application:For energy control terminal
Material:Plastic
Colour:White
For panel thickness: 7 – 35 mm
Installation:For screw fixing to plasterboards
Cat. No.
917.91.029
For cavity wall mounting
Cat. No.
Cavity wall box
917.91.031
Countersunk head screw M 3.5 x 25 mm
917.91.028
small distributor box
>>
>>
>>
>>
>>
For drill hole Ø:
68 mm
For panel thickness: 7 – 35 mm
Version:With retaining edge, dimensions
according to DIN standard
Material:Plastic
Colour:Red
>>
Cat. No.
917.91.012
>>
>>
>>
Supplied with:
>> 1 Device box for flush fitting
>> 2 Countersunk screws 15 mm
For flush mounting
Degree of
protection
Version
Dim. W x D x H
(mm)
Cat. No.
IP65
14 joint units
(single-row)
300 x 142 x 300
910.51.988
28 joint units
(double-row)
300 x 142 x 450
910.51.989
12 joint units
(single-row)
305 x 99 x 250
910.51.986
24 joint units
(double-row)
305 x 99 x 375
910.51.987
IP30
>>
>>
>>
>>
Area of application: For installation of safety
transformer, automatic circuit
breaker, installation control relay
and electronic control module
Version:With hat rail, IP 65 with door, IP 30
without door
Material: Housing: Plastic
Colour: Housing: Grey
Area of application:For energy control terminal
Material:Plastic
Colour:White
Installation:For flush mounting
Cat. No.
917.91.001
35
häfele diaLock the electronic access control system / 05.16
Turning challenges
into solutions.
Häfele. Your partner right from the start.
36
ACCESS CONTROL
Competence in
Project Support and Services.
A central pillar of this service offering is manufacturer-inde­pendent advice on
architectural and furniture hardware. Häfele’s project specialists are competent,
solution-oriented partners for architects, builders, investors, specialists, consultants
and general contractors.
In addition, Häfele also offers extensive support in all phases of the project
development. For example, specialised planning aids facilitate the development
and implementation of electronic access control systems, lighting concepts in
furniture and furnishings, as well as sliding door solutions.
The hardware store founded in 1923 by Adolf Häfele is now one of the leading
international companies for furniture and architectural hardware, as well as electronic
access control systems. Worldwide, more than 6,000 employees support
approximately 160,000 customers in over 150 countries. The headquarters of the
family-operated company is still in Nagold, Germany where it began.
Häfele supplies hardware to healthcare, hospitality and other commercial and
residential markets; to cabinet manufacturers, as well as trades that support building
contractors; with hardware of all famous brands, as well as fittings from its own
production plants in Germany.
Hotel Market
Project Competence.
In addition to the 360° project service, Häfele’s breadth and depth of product
range provides an additional basis for expertise in the hospitality sector. This
leads to solutions for specific and customized concepts, even for more complex
requirements: whether it concerns the hotel room door as a complete system,
Dialock electronic access control or the Häfele functionality for optimised hotel
furniture. Many hotel projects of a multitude of categories and with different
requirements and equipment have been realised by Häfele worldwide. With
targeted systems and products for hospitality, we offer standard and alternative
solutions to implement your hotel concepts: everything needed for doors and
everything needed for furniture.
Through our role as a valuable innovator and trendsetter, not only major hotel
chains such as Accor and Hyatt are among our customers, but also familyoperated private hotels or youth hostel and hostel market. Specialised staff in our
project services teams provide expert support for hospitality specifiers, builders
and operators. This results in buildings and rooms that make investments that are
fit for the future possible in the modern hotel world.
37
häfele diaLock the electronic access control system / 05.16
programming and
user keys
38
ACCESS CONTROL
Programming and user keys
Information
Programming
You have decided to install a door terminal (DT) or wall terminal (WT).
Now you can define the procedure that is used to program the electronics, and decide which key (user key) will be given authorisation to open
the lock.
You have the choice between two programming methods:
>> Key card programming for small projects (Stand Alone SA)
>> Software programming for large projects and extensive functionality (SW software)
Overview of advantages and usage areas
Key card programming
Software programming
Key card programming is ideal for projects comprising up to about 20
doors and 20 keys. The advantages thereof are low administrative cost
and ease of use.
The Häfele employee or project area specialist who is
responsible for you will assist you with the planning.
The authorisation for the door is assigned directly at the respective
terminal (DT or WT) using an electronic key (user key) and a
programming key card.
The authorisation for the locks is assigned to an electronic key (user
key) using a programming key card.
If the authorisation is to be withdrawn, it is deleted using a clearing key
card and the relevant electronic key (user key).
The authorisations are managed on a PC using special software.
An encoding station connected to the PC then transmits the data
to the MDU 100 mobile data unit, which transfers the data to the
respective terminal (DT or WT) via infrared or cable.
The electronic keys (user keys) are programmed on the encoding
station.
The advantage of the software is the visual display and management
of the authorisations on the PC and extended functionality such as
group definitions, series programming, setting the date and time,
incorporation of external software, etc.
User keys
User keys are the electronic version of keys. They must first have access authorisation assigned to them (programming: Stand Alone SA or
software SW) so that they can then be used during everyday operations.
The user keys are maintenance free (no battery) and wear-free (touch-free data transfer).
39
häfele diaLock the electronic access control system / 05.16
programming
dialock software
Project size
Access points
Personnel
master records
Encoder, entry or
online order
Functionality (Supplementary in ascending order)
Locking plan +
time
+ HMS
+ Role model
+ Wireless &
Wired online
Software SW 200 Control
20
20
2

50
50
2

100
100
2

200
200
2

500
500
2

Software SW 300 Hotel
20*
20
2


50*
50
2


100*
100
4


200*
200
8


500*
500
16

Software SW 400 Professional
50*
50
2



100*
100
4



200*
200
8



500*
500
16



Software SW 500 Wireless XL
50*
50
50




100*
100
100




200*
200
200




500*
500
500




*in hotels (+HMS) the guest cards are assigned to the access point (guest room door).
Supplied with:
Software extension: Delivered on USB stick
>> Software SW
>> Dialock software manual
>> Installation and operating instructions for the
Dialock door and wall terminals
>> License file (on USB stick)
>> License key (on USB stick)
Delivered on
USB stick
Software SW 200 Control 20/20
910.52.800
Software SW 200 Control 50/50
910.52.801
Software SW 200 Control 100/100
910.52.802
Software SW 200 Control 200/200
910.52.803
Software SW 200 Control 500/500
910.52.804
Software SW 300 Hotel 20/20
910.52.810
Software SW 300 Hotel 50/50
910.52.811
Software SW 300 Hotel 100/100
910.52.812
Software SW 300 Hotel 200/200
910.52.813
Software SW 300 Hotel 500/500
910.52.814
Software SW 400 Professional 50/50
910.52.831
Software SW 400 Professional 100/100
910.52.832
Software SW 400 Professional 200/200
910.52.833
Software SW 400 Professional 500/500
910.52.834
Software SW 500 Wireless XL 50/50
910.52.841
Software SW 500 Wireless XL 100/100
910.52.842
Software SW 500 Wireless XL 200/200
910.52.843
Software SW 500 Wireless XL 500/500
910.52.844
Order reference:
Please check your order carefully. Because of the customer-specific configuration of
the software, the license cannot be returned.
Please keep the USB stick and all licenses in a safe place. It is in your own interest
to ensure that these can only be accessed by authorised persons. The software and
the licenses may be copied for the ordered project.
40
dialock software extension
Supplied with:
Software extension: Delivered on USB
stick
>>
Software SW
>>
Installation and operating instructions for the Dialock door
>>
and wall terminals
>>
License file (on USB stick)
>>
License key (on USB stick)
Delivered on
USB stick
Software extension: Delivery of the license
via mail/fax
License file (via mail)
License key (via fax)
Order reference:
Please check your order carefully. Because of the
customer-specific configuration of the software, the license
cannot be returned.
Please keep the USB stick and all licenses in a safe place.
It is in your own interest to ensure that these can only be
accessed by authorised persons.
The software and the licenses may be copied for the
ordered project.
8 additional authorisation writers online
910.52.890
16 additional authorisation writers online
910.52.891
Installation of software on additional workplace
computer (starting from the 21st workplace computer)
910.52.880
50 additional access points
910.52.885
100 additional access points
910.52.886
200 additional access points
910.52.887
500 additional access points
910.52.888
50 additional personnel master records
910.52.881
100 additional personnel master records
910.52.882
200 additional personnel master records
910.52.883
500 additional personnel master records
910.52.884
Programming key card
Clearing key card
For Mifare Classic processor
For Mifare Classic processor
>>
>>
>>
Area of application:Small projects with few Dialock keys
Material:Plastic
Dimensions:
54 x 85 mm (credit card size)
Functionality:
For allocating access authorisations without software and
programming station
>>
>>
>>
Area of application:Small projects with few Dialock keys
Material:Plastic
Dimensions:
54 x 85 mm (credit card size)
Functionality:
For allocating access authorisations without software and
programming station
Cat. No.
Cat. No.
917.64.010
917.64.011
41
ACCESS CONTROL
programming
häfele diaLock the electronic access control system / 05.16
programming
encoding station
es 110 encoding station
>>
>>
>>
>>
Area of application:For programming transponder media
Version:LCD display, background lighting
Material:Housing: Plastic
Colour: Housing: Silver coloured/grey
Functionality:
The authorisation data that were allocated with the Dialock software
are transferred via the TCP/IP network to the ES 110 and written
onto the presented transponder medium.
The system is operated using the Dialock software or the integrated
HMS hotel management system.
Configuration of the ES 110 is carried out on a PC and its web
interface (browser) via the TCP/IP network to the ES 110.
Technical data
Voltage supply
PoE Power over Ethernet with PoE splitter (not supplied) or PS6 external power supply unit
Current consumption
max. 300 mA
Display
128 x 64 pixels
Connections
RJ45 socket for connecting the programming cable to the PC
Data transfer
between PC and ES 110 via TCP/IP
Dimensions
185 x 130 x 57 mm (L x W x H)
Supplied with:
>>
1 ES 110 encoding station
>>
1 Patch cable Cat 5, 2 m
>>
1 PS6 external power supply unit
>>
Short instructions
Technology
Cat. No.
Mifare Classic
917.42.080
MDU 110 mobile data unit
>>
>>
>>
>>
Area of application: For transferring data and
configurations from the PC (Dialock
software) to offline terminals
Version:LCD display, background lighting,
5 language settings
Material:Housing: Plastic
Colour: Housing: Anthracite, similar to RAL
7020
Functionality:
Operation is carried out using the “clickwheel”
(one-handed operation) on MDU 110.
A USB 2.0 interface is used for communication with the PC which is
recognised by the PC as mass storage device. Installation of drivers
is therefore not necessary.
Data exchange with the terminals takes place via wireless interface.
This also applies to firmware updates that may be required.
Technical data
Voltage supply
Lithium-ion battery, charged using USB connection
Service time
24 h, when operating without background lighting (can be switched off)
Weight including batteries
approx. 400 g
Display
128 x 64 pixel, 6 lines
Connections
USB 2.0 interface for connection with the PC
Internal data memory
4 GB, corresponds to approx. 5000 terminal data records
Security
Encrypted storage of data and data transfer between MDU 110 and terminals
Supplied with:
>>
1 ES 110 encoding station
>>
1 Patch cable Cat 5, 2 m
>>
1 PS6 external power supply unit
>>
Short instructions
42
Technology
Cat. No.
Mifare Classic
917.42.180
ACCESS CONTROL
User keys
For mifare technology
Card holder and short clip
dialock key cards
Mifare Classic
Card holder without short clip
>>
>>
>>
>>
Version:Wear and tear free (touch-free data
transfer), maintenance free (without
batteries), insensitive to external
influences such as wetness, moisture,
magnetic fields, mechanical vibrations,
dust, can be reprogrammed at least
100,000 times, forgery-proof unique
number
Material:Plastic
Colour:White
Dimensions (mm):
54 x 86 x 0.76 (credit card size)
Functionality:
>> Electronic key for Dialock
>> 4 independent locking authorisations per key card possible
(blank card)
>> 3 independent locking authorisations per key card possible
(card printed on both sides)
Technical data
≥10 years
Operating temperature
-35º to +50º (Celcius)
Packing
Cat. No.
1, 50 or 250 pieces
917.64.070
1, 50 or 250 pieces
917.64.072
Blank card
Mifare Classic
>>
>>
>>
Area of application:For accommodating and protecting
key cards
Version:3 fixing methods for right, left or
vertical dispense
Material:Plastic
Finish:Transparent
Cat. No.
917.94.080
Short clip
>>
Data storage
Technology
>>
>>
Area of application:For attaching the card holder to a
piece of clothing
Version:Plastic double inset
Cat. No.
917.94.081
Printed on both sides
Mifare Classic
43
häfele diaLock the electronic access control system / 05.16
User keys
For mifare classic technology
KT Key tag
mifare Key tag
For Mifare Classic
>>
>>
For Mifare Classic processor
Version:Waterproof
Material:Plastic
Functionality:
>> Electronic keys for Dialock as key tag
>> 4 independent locking authorisations per key tag possible
Technical data
Data storage
≥10 years
Operating temperature
-35º to +50º (Celcius)
Technology
Colour
Cat. No.
Mifare classic
Black
917.64.093
Blue
917.64.098
Red
917.64.099
>>
>>
>>
Version:Solid, ultrasound welded and made
waterproof
Material:Combination of stainless steel frame
and impact resistant polycarbonate
Finish:Matt
Functionality:
Electronic keys for Dialock as key tag
4 independent locking authorisation per key tag possible
Technical data
Data storage
≥10 years
Dimensions
Ø 36 mm, height: 5.3 mm
Operating temperature
-35º to +50º (Celcius)
Transponder
Mifare Classic
Colour
Cat. No.
White
917.64.147
Black
917.64.143
Grey
917.64.145
Red
917.64.149
Blue
917.64.148
Orange
917.64.141
Order reference:
Custom print available on request
44
ACCESS CONTROL
User keys
For mifare classic technology
personalised Printed Dialock KC key card
For Mifare Classic
>>
>>
>>
>>
>>
Functionality:Electronic key for Dialock
Version:Wear and tear free (touch-free data transfer),maintenance free (without batteries), insensitive to external influences such as wetness, moisture,
magnetic fields, mechanical vibrations, dust, forgery-proof unique number, mass printing procedure
Usage:Can be re-programmed at least 100,000 times.
Material:Plastic
Colour:Base colour white, print in accordance with customer specifications.
Functionality:
>> 4 independent locking authorisations (4 segments) per Dialock KC
key card possible
Technical data
Data storage
≥10 years
Ambient temperature (operation)
–35º to +50º (Celcius)
Coating
4 colours (optionally on one side
or both sides)
Dimensions
54 x 85 x 0.76 mm (credit card
size)
Operating temperature
–35° to +50° (Celcius)
Technology
Cat. No.
Mifare classic
917.64.071
Order reference:
Minimum order quantity: 50 pieces
Price on application please enquire.
Note:
Planning by Dialock specialists is required.
Pre-segmentation is required for data storage Dark colours on
the card may influence the turn-on characteristics.
45
häfele diaLock the electronic access control system / 05.16
References
Many hotel projects of different categories, demands and equipment have been implemented successfully by Häfele,
Pfleiderer, Duropal and Spence doors to date. The project specialists are competent, solution-oriented partners of the
architects, builders, operators, expert planners, general contractors and investors who are involved in the construction.
46
ACCESS CONTROL
Parkhotel Stuttgart Trade Fair Airport,
Stuttgart
Architect: Asal+Traub Architects, Pforzheim
Operator: Parkhotel Stuttgart Trade Fair Airport
Hotel ibis Styles Nagold Black Forest
Architect: Ulrich Schwille Architects, Reutlingen
Operator: Success Hotel Management GmbH, Stuttgart
Investor: Accor Hotellerie Deutschland GmbH
Hotel AVIVA, A-St. Stefan am Walde
Architect: Arkade ZT GmbH, A-Haslach
a.d. Mühl Owner / Investor
Operator: Werner Pürmayer
Park Inn by Radisson Papenburg, Papenburg
Architect: Kapels Architeckturbüro, Zetel
Owner: Johann Bunte GmbH & Co. KG, Papenburg
Hyatt Regency, Düsseldorf
Architect: SOP Architects, Düsseldorf
Owner: Projektgesellschaft Hafenspitze
47
732.04.627 the electronic access control system / 05.16
Häfele Australia Pty. Ltd. | 8 Monterey Road | Dandenong | Victoria 3175
Phone: 1300 659 728 | Fax: (03) 9212 2001 | Email: info@hafele.com.au | www.hafele.com.au
Häfele New Zealand Ltd. | 16 Accent Drive | East Tamaki | Auckland 2013
Phone: 0800 442 335 | Email: info@hafele.co.nz | www.hafele.co.nz
HÄFELE LOCATIONS:
Australia I MELBOURNE I SYDNEY I NEWCASTLE I BRISBANE I ADELAIDE I LAUNCESTON I HOBART I PERTH
New Zealand I Auckland I Wellington I Christchurch
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising