ARRAYABLE LOUDSPEAKER SYSTEM
AE-5
ARRAYABLE
LOUDSPEAKER SYSTEM
Description:
The AE-5 two-way, bi-amped system
is the flagship of the Apogee line.
This fully arrayable system functions
brilliantly when used alone or as a
building block for a large
sophisticated system, thus making it
one of the most versatile
loudspeakers ever developed.
Engineering Data:
Driver Complement:
Low Frequency: One Apogee 12"(305mm) neodymium magnet
cone-type driver is treated with a waterproofing compound,
providing resistance to moisture, and enabling long-term stability of
cone resonance and cone mass parameters
High Frequency: One Apogee 1"(25mm) throat composite
diaphragm compression driver is treated with Ferrofluid® for greater
power handling capability, lower distortion, and control of shortterm impedance rise
Format:
Bi-amped/Two-way/Electronically-coupled
Dispersion:
H: 90° x V: 45°
Frequency Response (1m on axis):
53 Hz to 17 kHz ± 3 dB
Max. SPL (@1m):
Input Connectors:
126 dB cont./132 dB peak
Neutrik™ NL4MP Speakon™
connectors standard; Cannon EP series
and gas-tight barrier strips optional
PTML (peak transient mechanical limit):
Compatible Processors:
Sensitivity (1W @ 1m):
DLC24 Digital Controller
LF: 99 dB/100 Hz to 1 kHz
HF: 106 dB/1 kHz to 20kHZ
Handles:
Four handles designed as an integral part of enclosure (no moving parts)
Grille:
144 dB
Nominal Impedance:
8 ohms, each driver
Powder-coated, diamond-punched steel with acoustic foam covering
Max. Power Handling:
Trim:
LF: 300W cont./1200W peak
HF: 150W cont./600W peak
Optional protective steel trim pieces on top and bottom edges;
powder-coated for durability
Dimensions:
Rigging Hardware:
Four 12-gauge steel nutplates, mounted two on top and two on
bottom, recessed, nominally flush; accepts 3/8"-16 thread (10mm
nutplate or Aeroquip Pan fittings optional); nutplates are backed
with 12-gauge steel internal brackets
Finish:
Textured high-strength black epoxy paint; other colors optional
Enclosure Type:
20° trapezoidal, optimally-vented bass
Cabinet Construction:
Multi-ply birch with stainless steel fasteners
front: 14"(356mm) W x 23"(584mm) H
rear: 9.3"(236mm) W x 23"(584mm) H
depth: 16.5"(419mm)
Weight:
76 lb. (34.5 kg)
Polar Measurements AE-5 (6 dB/division, normalized)
0°
330°
300°
60°
270°
90°
120°
240°
150°
90°
270°
120°
240°
150°
300°
60°
90°
270°
120°
240°
150°
210°
180°
180°
62.5 Hz
60°
270°
90°
0°
330°
30°
300°
dB/
IV
250 Hz
0°
330°
210°
180°
125 Hz
0°
330°
30°
300°
60°
210°
30°
0°
330°
30°
10 dB/division
0°
30°
Frequency Response AE-5 (with controller)
60°
90°
330°
30°
300°
270°
300°
60°
90°
270°
20
120°
240°
120°
240°
120°
50
100
200
500
1K
2K
5K
10K
20K
240°
Hz (Frequency)
150°
150°
210°
0°
330°
30°
Measured in a free-field anechoic environment using a swept one-third octave input.
2,000 Hz
0°
330°
210°
180°
1,000 Hz
0°
30°
150°
210°
180°
180°
500 Hz
330°
30°
Processor Notes:
300°
60°
90°
270°
120°
240°
150°
210°
180°
4,000 Hz
300°
60°
90°
270°
120°
240°
150°
210°
180°
8,000 Hz
300°
60°
270°
90°
120°
240°
150°
210°
180°
16,000 Hz
H
All polar measurements obtained in a freefield environment at 10° increments.
The DLC24 Digital Loudspeaker Controller is a digital engine with an analog
surface. It combines the most advanced technology available with intuitive
interfaces to provide the key elements that ensure optimal loudspeaker
system performance and management in a variety of live sound and fixed
installation applications.
The controller provides factory-set equalization curves to smooth the
response, protective limiting, and active crossovers (for bi-amplified models
and subwoofers).
Dimensional Drawings AE-5 (dimensions in inches and millimeters)
www.apogee-sound.com
Specifications subject to change without notice. 55-0020-01D
©2006, 2017 Bogen Communications, Inc. 1703
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising