Universal Splashproof Learning Remote Control

Universal Splashproof Learning Remote Control
LRC
SET
SAT
TV
EPG
DVD
MENU
OK
EXIT
R
S
PVR
1
2
3
4
5
6
7
8
9
PG.UP
0
SUB
PG.DN
TEXT
VOL
PR
TVS/00485/04
Universal
Splashproof
Learning
Remote
Control
TileVision® Universal Splashproof Learning Remote Control
The remote control is designed to allow the user to control up to
three different devices by using the TV, SAT and DVD buttons to select
which device is to be controlled.
The remote control is preprogrammed with a library of codes covering
all major device brands. The full code lists for televisions, satellite
receivers, DVD recorders/players and CBLs are available for download
from the www.tilevision.tv web site.
The remote control also has the facility to directly learn remote control
codes from other infrared remote controls. This allows the remote
control to learn up to 41 functions for each chosen device.
Contents
Page
The Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Activating the Remote Control
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Replacing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
How to Control a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
TileVision® Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Entering a Brand Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Auto Search – All Brand Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Manual Search – All Brand Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Checking/Recalling a Device Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Manual Programming and Program Deletion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Deleting All Button Programs for One Device
......................................6
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Button Assignment Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
The Remote Control
1 Power On/Off button – Turns the TileVision® on
1
SET
2
TV
4
SAT
5
EPG
DVD
6
MENU
9
7
8
OK
12
13
14
3
10
EXIT
11
15
16
17
R
22
24
18
S 19
20
PVR
1
2
3
4
5
6
7
8
9
PG.UP
25
0
SUB
PG.DN
TEXT
21
VOL
PR
TVS/00485/04
27
23
26
from, or off to, standby
2 Sound Mute button – Turns the sound on or off
3 SET button – for manual programming.
4 TV ‘Device’ button – Selects the TV’s set of
button functions
5 SAT ‘Device’ button – Selects the Satellite
Receiver’s set of button functions
6 DVD ‘Device’ button – Selects the DVD Player/
Recorder’s set of button functions
7 EPG button – Displays the Electronic
Programme Guide
8 MENU button – displays or closes menus
9 Up button – Menu/EPG navigation
10 Right button – Menu/EPG navigation
11 Down button – Menu/EPG navigation
12 Left button – Menu and EPG navigation
13 OK button – Accepts menu selections
14 Input Source button – Displays the Input
Source menu and allows source selection
15 EXIT button – Closes all on-screen menus and
lists
16 Colour and Teletext buttons – DTV Text and
text menu options
17 Rewind, Pause, Play, and Fast Forward buttons
– For use with TV Sky+™, Virgin V+, DVDs, VCRs,
etc.
18 Record button – For use with TV Sky+™, Virgin
V+, DVDs, VCRs, etc
19 Time Shift Record button
20 Stop button – For use with TV Sky+™, Virgin V+,
DVDs, VCRs, etc
21 PVR button
22 VOL Volume up/down buttons – Adjust the
volume
23 Number entry buttons
24 PR Programme up/down buttons – Selects next
or previous programme
25 Page up/down buttons – EPG navigation
26 Sub button – Turns the subtitles on or off
27 TEXT button – Enters or exits teletext
The TV functions above are the defaults for a new remote control which has not been programmed.
1
Activating the Remote Control
Before the remote control can be used an insulating plastic film must be removed
from beneath the battery.
Place the remote control face down on a horizontal flat surface and use
the opener to release the battery compartment cover by rotating it in an
anti‑clockwise direction. Set the battery cover and opener to one side.
Rest one finger lightly on the battery and pull the printed tag to ease the
insulating film from underneath the battery. Try to avoid touching the black
O-ring as it is coated with light grease.
Replace the battery cover and lock it back in place using the opener.
Cell
ium
LiTh CR2032
3V
Remote control with battery cover removed
Replacing the Battery
Place the remote control face down on a horizontal flat surface and use
the opener to release the battery compartment cover by rotating it in an
anti‑clockwise direction. Set the battery cover and opener to one side.
Carefully remove the old battery and dispose of it safely.
Try to avoid touching the black O-ring as it is coated in light grease.
Insert the new CR2032 battery with the positive (+) side upwards. Replace the
battery cover and lock it back in place using the opener.
2
How to Control a Device
Press and release the device button: TileVision® ( TV ), satellite receiver ( SAT ) or
DVD recorder/player ( DVD ) that you wish to control. Press the function button you
require. The LEDs will light to confirm that a signal is being sent and which device
is being controlled.
To select a different device to control, press and release the device button:
TileVision® ( TV ), satellite receiver ( SAT ) or DVD recorder/player ( DVD ) that you wish
to control. Press the function button you require. The LEDs will light to confirm
that a signal is being sent and which device is being controlled.
TileVision® Codes
The TileVision® learning remote control is supplied with the TV device button
set to the TileVision® TV22/FR1 and TV26/FR2 model remote control codes. If
these remote control codes are accidentally erased, or if an alternative TileVision®
model’s remote control codes are required, enter the appropriate three digit code
for the TileVision® model as shown below.
TileVision® Model
TV22/FR1, TV26/FR2
TV19/FR1, TV26/FR1
TV17/FR5,TV23/FR3
TV17/FR4, TV17/FR3, TV17/FR2
TV23/FR2, TV23/FR1
Three Digit Code
368
371
369
370
370
For button assignment
information see the
table on page 9.
Entering a Brand Code
1 Locate the three digit code in the brand list, for the satellite receiver or DVD
recorder/player that you wish to control.
2 Press and hold down the Television (
button until the red light stays on.
TV
), satellite (
SAT
) or DVD ( DVD ) device
3 Enter the three digit code using the number buttons 0–9.
4 As each digit is entered the red light will flash once and then remain on.
5 If the three digit code is correct the red light will go out. If the three digit code
is incorrect the red light will flash twice and then remain on.
6 Press the original device button again to exit the code entry mode.
Note: If a three digit code is not entered within 30 seconds the red light will flash
twice and exit code entry mode. Entering a three digit code will delete/erase the
programmed buttons for that device.
3
Auto Search – All Brand Codes
1 Switch the chosen device (TV, satellite receiver, DVD recorder/player) that you
wish to find the code for, to ON. When the correct code has been found the
device will switch OFF.
2 Press and hold down the TV ( TV ), satellite (
red light stays on, then release the button.
3 Press the power button (
mode.
SAT
) or DVD ( DVD ) button until the
) once and release, this will start the auto search
4 When the device switches OFF. Immediately press and release the device
button that was initially selected, to save the code in the remote control.
When the red light switches off, all the codes have been tried and the auto search
mode has been exited.
To exit the auto search mode before all the codes have been tried, press and
release the device button that was initially selected.
To learn which three digit code has been set to control the device see Checking/
Recalling the Device Code on page 5.
Manual Search – All Brand Codes
1 Switch the chosen device (TV, satellite receiver, DVD recorder/player) that you
wish to find the code for, to ON. When the correct code has been found the
device will switch OFF.
2 Press and hold down the TV ( TV ), satellite (
red light stays on, then release the button.
3 Press PR+ (
PR
) or PR- (
PR
SAT
) or DVD ( DVD ) button until the
) once and release. Each time PR+ (
pressed a code is transmitted.
To perform a fast search, press and hold down PR+ (
When the device switches OFF, release the PR+ (
PR
PR
PR
) or PR- (
) or PR- (
PR
) or PR- (
PR
PR
) is
) button.
) button.
Step 4 must be executed so that the code is saved in the remote control.
4 Press and release the device button that was initially selected to save the code
in the remote control.
To learn which three digit code has been set to control the device see Checking/
Recalling the Device Code on page 5.
4
Checking/Recalling a Device Code
To find out which three digit code is controlling any device:
1 Press and release the device button: TV (
which you want to find the code.
TV
), satellite (
SAT
) or DVD ( DVD ) for
2 Press the same device button again, together with the OK ( OK ) button and
release both buttons.
3 The red light will flash.
4 Count the number of flashes for each digit in the three digit code.
5 The red light will remain off for a short time between numbers.
6 When all three numbers have been flashed the red light will remain off.
One Flash
= 1
Two Flashes = 2
Three Flashes = 3
Four Flashes = 4
Five Flashes = 5
Six Flashes
= 6
Seven Flashes = 7
Eight Flashes = 8
Nine Flashes = 9
Ten Flashes = 0
For example:
Press and release the DVD ( DVD ) button.
Press and release the DVD ( DVD ) and OK ( OK ) buttons.
The remote control would then show nine flashes (9), pause, two flashes (2),
pause, and one flash (1), to confirm the three digit code of 921.
5
Manual Programming and Program Deletion
High levels of ambient light such as natural sunlight or energy efficient fluorescent
lights should be avoided when manually programming the remote control.
Any button other than the device buttons
be manually programmed.
TV
,
SAT
and
DVD
and the
SET
button can
Manually Programming a Button
1 Place the original remote control and the learning remote control roughly
10 mm apart facing ‘head-to-head’ with each other.
2 On the learning remote control press and release the required device button,
TV ( TV ), satellite ( SAT ) or DVD ( DVD ) as appropriate.
3 Press and hold the SET ( SET ) button on the learning remote control until the red
light lights and remains lit. The remote control is now in learning mode.
If the red light does not turn on, go back to step 2 and try again.
4 On the learning remote control press and release the button that is to be
programmed. The red light will flash rapidly.
5 On the original remote control, press and hold the button that is to be learned.
When the red light on the learning remote control flashes three times and
then remains lit the code has been learnt. If the red light does not flash, repeat
steps 4 and 5.
Note: If step 5 is not completed within 15 seconds the learning remote control
will exit learning mode and the light will stop flashing.
6 Repeat steps 4 and 5 to program other buttons.
7 Once the required buttons have been programmed press the SET (
again on the learning remote control to exit learning mode.
SET
) button
SAT
) or
Deleting All Button Programmes for One Device
1 Press and release the appropriate device button TV ( TV ), satellite (
DVD ( DVD ) to select which device’s programs are to be deleted.
2 Press and hold the chosen device button together with SET (
the red light flashes three times.
SET
) button until
3 All of the programmed buttons for the chosen device have now been cleared
of their programming.
Deleting programs from buttons does not delete any three digit brand code
which has been entered.
6
Troubleshooting
Problem
Solution
The red light flashes five times after a
button is pressed.
Replace the battery with a new type
CR2032 battery.
The red light does not flash when any
button is pressed.
Replace the battery with a new type
CR2032 battery.
The red light does not flash when a
‘programmed’ button is pressed.
The button has not been programmed
or has not been programmed
correctly. Program the button.
The red light flashes when a button is
pressed but the TileVision® or device
does not respond.
Ensure that the remote control is
within three meters of, and pointed at,
the TileVision® or piece of equipment.
The remote control does not operate
a device correctly or some commands
are not working.
Try all listed codes for the device as
shown in the control code pdfs which
are available from the support section
of the TileVision® web site or program
the buttons from the device’s own
remote control.
During learning the red light does
not flash three times or stays on for a
long time after pressing a button to be
learnt.
Memory is full or a bad capture has
occurred. For optimum learning, avoid
high levels of ambient light such as
natural sunlight or energy efficient
fluorescent lights. Try adjusting the
position of the remote controls before
performing the procedure again.
7
Troubleshooting
If the remote control fails to operate after the battery has been installed or
replaced.
A. Gently pull forward the small battery terminal.
B. Gently raise up both prongs.
C. Insert the battery at an angle, so it rests on the battery terminal A.
Refit the battery cover and wait 15 seconds before operating the remote control.
Li
Th
i
CR um
20 Ce
l
3V 32 l
C
A
B
8
Button Assignment Table
Programmable
Remote Control
Button
TileVision® Model/Button Function
TV19/FR1
TV17/FR5
TV17/FR4 /FR3 /FR2
TV26/FR1 - 371
TV23/FR3 - 369
TV23/FR2 /FR1 - 370
Power On/Off
Power On/Off
Power On/Off
Power On/Off
Number buttons 0–9 Number buttons 0–9 Number buttons 0–9 Number buttons 0–9
VOL
PR
Volume
Up/Down
Programme
Up/Down
Input Source
EPG
EPG
FastText/DTV Text
VOL
PR
Volume
Up/Down
Volume
Up/Down
Volume
Up/Down
Programme
Up/Down
Programme
Up/Down
Programme
Up/Down
Input Source
EPG
EPG
FastText/DTV Text
TV/ AV
EPG
TV/AV
TV/ AV
TV/AV
No Function
EPG
FastText/DTV Text
FastText
Fast Rewind
Picture Mode
No Function
PSM
Picture Memory
Pause
Sound Mode
No Function
SSM
Sound Memory
Play
Aspect Ratio
Previous Channel
Fast Forward
Info
Info
Sub Page/Time
Text
Text
Text
Text
Mute
Mute
Mute
Mute
TEXT
Menu
MENU
OK
EXIT
Menu
MENU
MENU
Menu
ARC
Aspect Ratio
MENU
Menu
Up
Up
Up
Up
Down
Down
Down
Down
Left
Left
Left
Left
Right
Right
Right
Right
OK
EXIT
Sub
OK
OK
OK
OK
OK
OK
EXIT
No Function
No Function
Subtitles
No Function
No Function
EXIT
9
Porter Lancastrian Limited
Lower Healey Business Park · Froom Street · Chorley
Lancashire · UK · PR6 9AR
Tel: 0870 871 0111 · Fax: 0870 871 0112
eMail: sales@porta.co.uk · Web: www.tilevision.tv
TileVision® Learning Remote Control Operating Instructions – April 2012 – TVS/00527/04
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising