M-164E-AE
M-164E-AE
Analog mixer with an effect DSP function
Stereo effects processor with 16 presets
for reverb, delay, chorus and other effects.
sound without compromise
www.toa.eu
M-164E-AE
Analog mixer with an effect DSP function
The M-164E-AE is an affordable mixer for installation in mosque, conference room, restaurant or small
hall, the 16-channel mixer features 6 mic inputs with XLR inputs and phantom power and highpass filter
for great-sounding tracks and a unique design with built-in meter bridge.
With it‘s 5 stereo line inputs the M-164E-AE offers a versatile variety of input channels. Its stereo effects
processor comes with 16 programs of reverb, delay, chorus and other sound effects. In addition the
mixer features 3-Band EQ on mic channels 1-6, 2-Band EQs on line channels 7-10 and main output, a
RIAA phono preamp on channels 9-10 (RCA), Sub and Main output busses, separate stereo and mono
outputs for main and aux as well as two aux sends.
Rear Design
MIXER WITH EFFECT DSP FUNCTION
USER FRIENDLY PANEL DESIGN
• variety of input/output connectors for many types of
audio instruments
• Visible Level meter for each input channel for easy
checking input signal
• built-in effect functions for simple mixing with reverb etc.
• A fader for each channel with comfortable operation feeling
Panel Design
FUNCTIONS
Input
16 channels (6 MONO + 5 Stereo) with a fader and a meter-bridge for level monitoring
XLR input with phantom power supply and TRS balance input for MONO input Ch 1-6
TRS balance input for Ch 7/8, 13/14 (MONO input with only L-Ch connection)
16 INPUTS (6 MONOs + 5 Stereos)
HIGH QUALITY MIXING
RCA unbalance input for Ch 9/10, 11/12
• 6 microphone/line inputs with phantom power, by
XLR and TRS phone jack connector
• High quality analog mixing design is implemented
by such know-how
3 Bands EQ, and HPF (High pass filter) for Ch 1-6
3.5 mm mini-jack input for Ch 15/16
2 Bands EQ, and HPF (High pass filter) for Ch 7-10
• 4 stereo inputs by RCA pin jack for any audio device like a CD player etc.
Assign switch for Stereo BUS and Sub BUS
• 1 stereo input by 3.5mm mini jack for any portable
audio device
Output
4 Buses output (Stereo Bus + Sub Bus) with a fader
2 AUX outputs (AUX1 selectable from Pre-fader and Post-fader for Ch 1-10)
Effect return from AUX 2 to Ch 13/14 or Ch 15/16, selectable
TRS balance output or RCA unbalance output for Stereo and Sub
APPLICATION EXAMPLES
Mosque with reverb effect
PA for restaurants
2 Bands EQ for Stereo BUS output
Conference & Lecture rooms
Video conference rooms
Monitor
With a head-phone, Stereo BUS and Sub BUS can be monitored
Effects
16 preset digital effector (Hall1-2, Room1-3, Plate1-3, Chorus, Flange, Delay 1-2,
Chorus/Room1-3, Rotary Speaker)
Power
Cord holder for not losing a connection of a cable of AC adaptor
SPECIFICATIONS
Power Source
AC 100 - 240 V, 50 - 60 Hz with AC Adaptor: 12 V/ 2.5 A
Power Consumption
25 W
Frequency Response
20 Hz - 20 kHz (+1 /-3 dB, Trim at max, 150 Ω load)
Hum & Noise
-60 dBu or less (1 mic input, Trim at max.) / -52 dBu (6 mics input, Trim at max.)
Distortion
<0,01 % (20 Hz - 20 kHz, Trim at min.)
Inputs and Outputs
16 Inputs, 4 Output Buses, 2 Aux Sends, analog
Input
6 x Mic/Line Inputs:
• 6 x Mic Inputs: XLR 3 female, electronically balanced, 2.4 kΩ,
Input level: nominal -58 dBu (Trim at max.) / max. + 10 dBu (Trim at min.) or
• 6 x Line Inputs: 3-pole, electronically balanced, 22 kΩ,
Input level: nominal -38 dBu (Trim at max.)/ max. + 30 dBu (Trim at min.)
5 x Stereo Inputs:
• Input 7-8 & 13-14: line jacks 6.3 mm (TRS), electronically balanced, 10 kΩ,
Input level: nominal +4 dBu/ max. + 22 dBu
• Input 9-10: RCA pin jacks, unbalanced, 47 kΩ (with Phono on),
Input level: nominal -10 dBV (-54 dBV with Phono on)/ max. + 11 dBV
• Input 11-12: RCA pin jacks, unbalanced, 10 kΩ (with Phono on),
Input level: nominal -10 dBV/ max. + 11 dBV
• Input 15-16: 3-pole mini jack (tip: L), unbalanced, 10 kΩ ,
Input level: nominal -10 dBV / max. + 11 dBV
Output
• Stereo Outputs (L,R) balanced
Line jacks 6.3 mm, 100 Ω, output level: nominal +4 dBu / max. + 24 dBu
• Stereo Outputs (Mono) pseudo balanced
Line jacks 6.3 mm, 100 Ω, output level: nominal -2 dBu / max. + 20 dBu
• Stereo Outputs (L,R) unbalanced
RCA jacks, 100 Ω, output level: nominal -10 dBV / max. + 6 dBV
• Sub Outputs (L,R) pseudo balanced
Line jacks 6.3 mm, 150 Ω, output level: nominal +4 dBu / max. + 20 dBu
• Sub Outputs (Mono) pseudo balanced
Line jacks 6.3 mm, 150 Ω, output level: nominal -2 dBu / max. + 20 dBu
• Aux Send (1,2) jacks
Line jacks 6.3 mm, 150 Ω, output level: nominal +4 dBu / max. + 20 dBu
• Phones (1,2) line jacks, max output 45 mW + 45 mW (1 %THD, 32 Ω load)
Monitor
By head phone
DSP
3-band/2-band EQ, HPF, Effect Return
Effect
16 preset digital effects
Dimensions
390 (W) x 112 (H) x 344.5 (D) mm
Weight
3.4 kg
Accessories
AC Adaptor x 1, power cord x 2 (for UK 3-pole x 1, Europe 2-pole x 1)
0 dB= 1 V, 0 dBu = 0.775 V
TOA Electronics Europe GmbH
www.toa.eu
Specifications are subject to change without notice.
Printed in Germany (1501) 833TEEC270
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising