Panasonic | DMPBDT360GA | Panasonic DMPBDT360GA User manual

Panasonic DMPBDT360GA User manual
DMP-BDT460&360_EBGNGA-SQT0099.book 1 ページ
2014年1月28日 火曜日 午後3時57分
Operating Instructions
Blu-ray DiscTM Player
Model No. DMP-BDT460
DMP-BDT360
Firmware updates
Panasonic is constantly improving the unit’s firmware to ensure
that our customers are enjoying the latest technology.
Panasonic recommends updating your firmware as soon as you
are notified.
For details, refer to “Firmware updates” (> 14) or
http://panasonic.jp/support/global/cs/ (This site is in English only.)
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
Model number suffix “EB” denotes UK model.
EB
GN
SQT0099
GA
until
2014/4/14 DMP-BDT460&360_EBGNGA-SQT0099.book 2 ページ
2014年1月28日 火曜日 午後3時57分
Precautions
WARNING
Unit
To reduce the risk of fire, electric shock or product damage,
≥ Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this
unit.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
≥ Do not let metal objects fall inside this unit.
≥ Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or product damage,
≥ Ensure that the power supply voltage corresponds to the
voltage printed on this unit.
≥ Insert the mains plug fully into the socket outlet.
≥ Do not pull, bend, or place heavy items on the lead.
≥ Do not handle the plug with wet hands.
≥ Hold onto the mains plug body when disconnecting the plug.
≥ Do not use a damaged mains plug or socket outlet.
The mains plug is the disconnecting device.
Install this unit so that the mains plug can be unplugged from the
socket outlet immediately.
[BDT460] [BDT360_for_Australia_and_New_Zealand]
Small object
Keep the Memory Card out of reach of children to prevent
swallowing.
CAUTION
Unit
≥ This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein
may result in hazardous radiation exposure.
≥ Do not place sources of naked flames, such as lighted candles,
on this unit.
≥ This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile telephone.
[For[the[United[Kingdom,[Ireland,[Australia[and[New[Zealand]
≥ This unit is intended for use in moderate climates.
[For[South[East[Asia]
≥ This unit is intended for use in tropical climates.
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or product damage,
≥ Do not install or place this unit in a bookcase, built-in cabinet or
in another confined space. Ensure this unit is well ventilated.
≥ Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
≥ Do not place the unit on amplifiers/receivers or equipment that
may become hot. The heat can damage the unit.
≥ Do not expose this unit to direct sunlight, high temperatures,
high humidity, and excessive vibration.
2
SQT0099
Batteries
Mishandling of batteries can cause electrolyte leakage and may
cause a fire.
≥ Danger of explosion if battery is incorrectly replaced. Replace
only with the type recommended by the manufacturer.
≥ When disposing of the batteries, please contact your local
authorities or dealer and ask for the correct method of disposal.
≥ Do not mix old and new batteries or different types at the same
time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight
for a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote control for
a long period of time. Store in a cool, dark place.
Caution for AC Mains Lead
(For the AC mains plug of three pins)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for
your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-ampere and that it is approved
by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the body of the
fuse.
If the plug contains a removable fuse cover you must ensure that it
is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains
plug (figures A and B). Confirm the AC mains plug fitted and follow
the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure A
Figure B
Fuse cover
2. Replace the fuse and close or attach the fuse cover.
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
2014年1月28日 火曜日 午後3時57分
This unit adopts the following technology for copyright protection.
Cinavia Notice
This product uses Cinavia technology to limit the use of
unauthorized copies of some commercially-produced film and
videos and their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will be displayed and
playback or copying will be interrupted.
More information about Cinavia technology is provided at the
Cinavia Online Consumer Information Center at
http://www.cinavia.com. To request additional information about
Cinavia by mail, send a postcard with your mailing address to:
Cinavia Consumer Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
[For[Singapore]
Complies with
IDA Standards
DB01017
[For[Vietnam]
Suntech
Restriction on use of
unauthorized copied content
A0141060313AE01A2
DMP-BDT460&360_EBGNGA-SQT0099.book 3 ページ
Wireless LAN connection
The following limits are in place regarding the usage of this unit.
You must be aware of these limits before using this unit.
Panasonic will in no way be responsible for any incidental damage
which may arise due to a failure to obey these limits, or to any
condition of use or disuse of this unit.
≥ Data transmitted and received over radio waves may be
intercepted and monitored.
≥ This unit contains delicate electronic components.
Please use this unit in the manner in which it was intended and
follow the following points:
– Do not expose this unit to high temperatures or direct
sunlight.
– Do not bend, or subject this unit to strong impacts.
– Keep this unit away from moisture.
– Do not disassemble or alter this unit in any way.
[For[the[United[Kingdom[and[Ireland]
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” declares that this product is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our
R&TTE products from our DoC server:
http://www.doc.panasonic.de
Contact to Authorized Representative:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Germany
This product is intended to be used in the following countries.
Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,
Finland, France, Germany, Greece, Hungary, Ireland, Italy,
Iceland, Liechtenstein, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, United Kingdom, Switzerland
This product is intended for general consumer. (Category 3)
The WLAN feature of this product shall exclusively be used
inside buildings.
This product on purpose to connect to access point of 2.4 GHz or
5 GHz WLAN.
To dispose or transfer this
unit
The unit may keep the user settings information in the unit. If you
discard this unit either by disposal or transfer, then follow the
procedure to return all the settings to the factory presets to delete
the user settings. (> 30, “To return all settings to the factory
preset.”)
≥ The operation history may be recorded in the memory of this
unit.
Disposal of Old Equipment and Batteries
Only for European Union and countries with
recycling systems
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical
and electronic products and batteries must not be
mixed with general household waste.
For proper treatment, recovery and recycling of old
products and used batteries, please take them to
applicable collection points in accordance with your
national legislation.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling,
please contact your local municipality.
Penalties may be applicable for incorrect disposal of
this waste, in accordance with national legislation.
Note for the battery symbol (bottom
symbol):
This symbol might be used in combination with a
chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical
involved.
SQT0099
3
DMP-BDT460&360_EBGNGA-SQT0099.book 4 ページ
2014年1月28日 火曜日 午後3時57分
Table of contents
Precautions . . . . . . . . . . . . . . . . . 2
Getting started
Playback
Accessories . . . . . . . . . . . . . . . . .
Unit and media care . . . . . . . . . . .
Playable media. . . . . . . . . . . . . . .
Control reference guide . . . . . . . .
5
5
6
8
Connections and settings
Connecting to a TV . . . . . . . . . .
Connecting to
an amplifier/receiver . . . . . . . . .
Connecting to the network . . . . .
Settings . . . . . . . . . . . . . . . . . . .
Inserting or removing media . . . . 14
HOME menu . . . . . . . . . . . . . . . . 15
Multi User Mode . . . . . . . . . . . . . 16
Playback . . . . . . . . . . . . . . . . . . . 17
Enjoying Network Service . . . . . . 20
Home Network feature . . . . . . . . 21
“HDMI CEC” . . . . . . . . . . . . . . . . 22
USB Sharing . . . . . . . . . . . . . . . . 23
10
10
12
13
Settings
Option menu . . . . . . . . . . . . . . . . 24
Setup menu. . . . . . . . . . . . . . . . . 25
Reference
Troubleshooting guide . . . . . . . . 30
Specifications . . . . . . . . . . . . . . . 35
Limited Warranty (ONLY FOR
AUSTRALIA) . . . . . . . . . . . . . . . 39
4
SQT0099
2014年1月28日 火曜日 午後3時57分
Accessories
Unit and media care
Check the supplied accessories before using this
unit.
1 Remote control
∫ Clean this unit with a soft, dry
cloth
Getting started
[For[the[United[Kingdom[and[Ireland]
(N2QAYB000961)
[For[Australia[and[New[Zealand]
(N2QAYB000957)
≥ Never use alcohol, paint thinner or benzine to
clean this unit.
≥ Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
Getting started
DMP-BDT460&360_EBGNGA-SQT0099.book 5 ページ
(N2QAYB000959)
2
Batteries for remote control
1
HDMI Cable
[Except[the[United[Kingdom[and[Ireland]
AC mains lead
[For[the[United[Kingdom[and[Ireland]
(K2CT2YY00098)
[For[Australia[and[New[Zealand]
Lens cleaner: RP-CL720AE
≥ This lens cleaner may not be available for
sale in all countries, e.g. not available in
Germany, please consult your Panasonic
dealer for advice.
≥ This lens cleaner is sold as specific for DIGA,
but can be used on this unit as well.
∫ Clean discs
(K2CJ2DA00014)
[For[South[East[Asia]
See page 10 for more information.
DO
Connections and settings
∫ This unit’s lens
[For[South[East[Asia]
DO NOT


R6/LR6, AA
(Alkaline or manganese batteries)
Point it at the remote control signal sensor on this
unit. (> 8)
∫ Disc and card handling
precautions
≥ Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
≥ [BDT460] [BDT360_for_Australia_and_New_Zealand]
Clean any dust, water, or foreign matter from
the terminals on the rear side of the card.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
Settings
Insert the batteries to the terminal so that it (i
and j) matches those in the remote control.
Reference
∫ Using the remote control
Wipe with a damp cloth and then wipe dry with a
dry cloth.
Playback
≥ Product numbers are provided in these operating
instructions correct as of February 2014. These may be
subject to change.
≥ Do not use AC mains lead with other equipment.
SQT0099
5
DMP-BDT460&360_EBGNGA-SQT0099.book 6 ページ
2014年1月28日 火曜日 午後3時57分
Playable media
Device Media markings
Device types
BD-Video
BD-RE
BD
BD-R
DVD-Video
DVD-R
DVD
DVD-R DL
Contents format
Video
Video,
JPEG, MPO
Video, MKV, Xvid
Video
Video, AVCHD, MKV,
Xvid,
JPEG, MPO,
AAC, FLAC, MP3,
WAV, WMA
DVD-RW
Video, AVCHD
—
+R/+RW/+R DL
Music CD
CD
CD-R
CD-RW
—
MKV, Xvid,
JPEG, MPO,
AAC, FLAC, MP3,
Music [CD-DA], WAV,
WMA
SD Memory Card (from 8 MB to 2 GB)
AVCHD, AVCHD 3D,
SDHC Memory Card (from 4 GB to 32 GB)
MP4,
SDXC Memory Card (48 GB, 64 GB)
JPEG, MPO
(Compatible with both mini and micro types)
*
SD
USB
Music [CD-DA]
—
USB devices
(up to 2 TB)
MKV, MP4, MPEG2,
Xvid,
JPEG, MPO,
AAC, FLAC, MP3,
WAV, WMA
* [BDT460] [BDT360_for_Australia_and_New_Zealand]
≥ See pages 7 and 35 for more information on the types of content that can be played.
6
SQT0099
2014年1月28日 火曜日 午後3時57分
∫ Types of discs that cannot be
played by this unit
Any other disc that is not specifically
supported or previously described.
≥ DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ HD DVD
∫ Region management information
The unit can play back BD-Video/DVD-Video
discs of the following regions codes, including
“ALL”:
Example:
BD-Video
DVD-Video
[For[the[United[Kingdom[and[Ireland]
2
[For[Australia[and[New[Zealand]
4
[For[South[East[Asia]
3
∫ Finalize
Any DVD-R/RW/R DL, +R/+RW/+R DL and
CD-R/RW that are recorded by a recorder need to
be finalized by the recorder to play on this unit.
Please refer to the recorder’s instructions.
∫ BD-Video
≥ This unit supports high bit rate audio (Dolby®
Digital Plus, Dolby® TrueHD, DTS-HD High
Resolution AudioTM and DTS-HD Master
AudioTM) adopted in BD-Video.
≥ [BDT360] If “Dolby D/Dolby D +/Dolby TrueHD” is
set to “PCM” and “DTS Neo:6” is set to “Off”,
the maximum possible number of Dolby® sound
is 5.1ch PCM. (> 26, 27)
∫ 3D
≥ 3D videos and 3D still pictures can be played
back when this unit is connected to a 3D
compatible TV using a High Speed HDMI
Cable.
≥ 2D video can be enjoyed as 3D virtually. (> 25)
∫ Music CD
Operation and sound quality of CDs that do not
comply with CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed to work.
∫ SD card
[BDT460] [BDT360_for_Australia_and_New_Zealand]
≥ miniSD Cards, microSD Cards,
microSDHC Cards and
microSDXC Cards can be used,
but must be used with an adaptor
card. These are usually supplied
with such cards, or otherwise
customer provided.
≥ To protect the card’s contents,
move the record prevention tab (on the SD
card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards
that meet SD Card Specifications FAT12 and
FAT16 formats, as well as SDHC Memory
Cards in FAT32 format and SDXC Memory
Cards in exFAT.
≥ If the SD card is used with incompatible
computers or devices, recorded contents may
be erased due to the card being formatted etc.
≥ Usable memory may be slightly less than the
card capacity.
∫ USB device
≥ This unit does not guarantee connection with all
USB devices.
≥ This unit does not support USB device
charging.
≥ FAT12, FAT16, FAT32, and NTFS file systems
are supported.
≥ This unit supports USB2.0 High Speed.
≥ This unit supports an HDD formatted in FAT32
and NTFS. If the HDD is not recognized, the
power to the HDD may not be supplied. Supply
power from an external source.
∫ BD-RE, BD-R
Discs recorded in DR mode using Panasonic
Blu-ray Disc recorders may not play back the
audio etc., correctly.
≥ It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method, and how the files were
created.
≥ The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in these operating instructions. Read the disc’s
instructions carefully.
SQT0099
7
Getting started
DMP-BDT460&360_EBGNGA-SQT0099.book 7 ページ
DMP-BDT460&360_EBGNGA-SQT0099.book 8 ページ
2014年1月28日 火曜日 午後3時57分
Control reference guide
When other Panasonic devices respond to the remote control of the unit, change the remote control
code. (> 30)
e.g., [For[the[United[Kingdom[and[Ireland]
e.g., [For[Australia[and[New[Zealand]
11
11
1
1
2
2
abc
ㄅㄆㄇ
12
jkl
mno
13
wxyz
14
12
abc
ㄅㄆㄇ
jkl
mno
13
wxyz
14
PIP
3
ㄈㄉㄊ
pqrs
tuv
4
5
3
ㄈㄉㄊ
pqrs
4
5
15
6
tuv
15
6
7
7
16
17
18
16
17
18
8
8
19
9
19
9
20
10
20
10
e.g., [BDT460_for_the_United_Kingdom_and_Ireland]
28
29
30
Pull to flip down
the front panel.
SD CARD
21
22 23 24 25
26
27
[For[Australia[and[New[Zealand]
8
SQT0099
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2014年1月28日 火曜日 午後3時57分
Turn the unit on and off
TV operation buttons
You can operate the Panasonic TV using this
unit’s remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
[i j VOL] : Adjust the volume
Select title numbers, etc./Enter numbers or
characters
Cancel
Change audio (> 17)
Basic playback control buttons (> 17)
[For[the[United[Kingdom[and[Ireland]
Show Pop-up menu (> 17)
[For[Australia[and[New[Zealand]
Show the status messages (> 18)
[For[South[East[Asia]
Show USB Sharing menu (> 23)
Show Top menu (> 17)
Show Option menu (> 24)
Coloured buttons (red, green, yellow, blue)
Used for various purposes depending on the
display
Transmit the remote control signal
Open or close the disc tray (> 14)
[For[the[United[Kingdom,[Ireland[and[South[East[Asia]
Show the status messages (> 18)
[For[Australia[and[New[Zealand]
Switch Secondary Video on/off
(Picture-in-picture) (> 24)
Show MiracastTM screen (> 21)
Show the Home Screen of the Network
Service (> 20)
16 Exit the Menu screen
17 [For[the[United[Kingdom[and[Ireland]
Show Netflix screen (> 20)
[Except[the[United[Kingdom[and[Ireland]
Show Pop-up menu (> 17)
18 Show HOME menu (> 15)
19 [3, 4, 2, 1] : Move the highlight for
selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 17)
20 Return to previous screen
21 Disc tray (> 14)
22 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and
right
23 [BDT460] [BDT360_for_Australia_and_New_Zealand]
Blue LED
It is possible to set the LED to turn on/off.
(> 29)
24 [BDT460] [BDT360_for_Australia_and_New_Zealand]
SD card slot (> 14)
25 [BDT460] V.OFF LED (Video off LED)
It is possible to set the LED to turn on/off.
(> 29)
26 USB ports (> 14)
27 Display
28 Open or close the disc tray (> 14)
29 Basic playback control switches (> 17)
30 Standby/on switch (Í/I) (> 13)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
Rear panel terminals (> 10–12)
SQT0099
9
Getting started
DMP-BDT460&360_EBGNGA-SQT0099.book 9 ページ
DMP-BDT460&360_EBGNGA-SQT0099.book 10 ページ
2014年1月28日 火曜日 午後3時57分
Connecting to a TV
Connections and settings
Connect the AC mains lead after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC power.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p or 24p (4K) signal,
please use HDMI cables 5.0 meters or less.
[Except[the[United[Kingdom[and[Ireland] The HDMI-compliant cable is supplied with this unit.
[For[South[East[Asia]
2 AC mains leads are supplied.
Thailand: With a label
To a household mains
socket
HDMI cable
([Except[the[United[Kingdom[and[Ireland] supplied)
[BDT460]
HDMI IN
[BDT360]
AC mains lead (supplied)
≥ [BDT460] : Use HDMI AV OUT MAIN terminal.
≥ This unit consumes a small amount of AC power (> 35) even when turned off in standby mode. For
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input terminal.
HDMI AV OUT
HDMI cable
[BDT460]
([Except[the[United[Kingdom[and[Ireland] supplied)
HDMI IN
HDMI OUT
(ARC)
HDMI cable
HDMI IN
(ARC)
[BDT360]
Amplifier/receiver
≥ [BDT460] : Use HDMI AV OUT MAIN terminal.
≥ Set “Digital Audio Output” (> 26).
≥ When connecting to a non-3D or 4K compatible amplifier/receiver, connect this unit to a TV, then connect
the TV and the amplifier/receiver. Please note, however, that the audio can only be up to 5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.
10
SQT0099
DMP-BDT460&360_EBGNGA-SQT0099.book 11 ページ
2014年1月28日 火曜日 午後3時57分
HDMI AV OUT SUB [BDT460]
You can enjoy richer sound by using the HDMI AV OUT SUB terminal.
HDMI cable
HDMI cable
HDMI IN
HDMI IN
Amplifier/receiver
≥ Set “HDMI(SUB) Output Mode” to “V.OFF(Video Off)”. (> 26)
– Audio is output in high resolution regardless of compatibility of the amplifier/receiver with 3D.
≥ It is possible to play back 3D videos, 3D still pictures and 24p (4K) videos, etc., when the connected
TV is 3D or 4K compatible, even if the amplifier/receiver is not 3D or 4K compatible.
≥ The HDMI connection using HDMI AV OUT MAIN supports HDMI CEC (> 22).
The HDMI AV OUT SUB terminal is not compatible with the HDMI CEC.
OPTICAL
Optical digital cable
OPTICAL IN
Amplifier/receiver
≥ Set “HDMI Audio Output” to “Off” (> 26).
≥ Set “Digital Audio Output” (> 26).
SQT0099
11
Connections and settings
([Except[the[United[Kingdom[and[Ireland] supplied)
DMP-BDT460&360_EBGNGA-SQT0099.book 12 ページ
2014年1月28日 火曜日 午後3時57分
Connecting to the network
The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated (> 14)
≥ You can enjoy BD-Live (> 19)
≥ You can enjoy Network Service (> 20)
≥ You can access other devices (Home Network) (> 21)
≥ This unit supports Wi-Fi DirectTM and can make a wireless connection to wireless devices without
router. You can use this function when enjoying Home Network feature, etc. Internet access is not
available while connected via Wi-Fi DirectTM. (> 21, 28)
For details about connection method, refer to the instructions supplied with the connected equipment.
Wireless LAN connection
This unit has built-in Wi-Fi® and can be connected to a wireless router.
Wireless router, etc.
Internet
≥ For up-to-date compatibility information on your wireless router, refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ The unit is not compatible with public wireless LAN services (Hotspot etc.) provided in airports,
stations, cafes, etc.
≥ See page 3 for the precautions for wireless LAN connection.
LAN cable connection
LAN Cable
Broadband router, etc.
Internet
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.
12
SQT0099
DMP-BDT460&360_EBGNGA-SQT0099.book 13 ページ
2014年1月28日 火曜日 午後3時57分
Settings
∫ About the wireless connection
Easy Settings
After connecting your new player for the first time
and pressing [Í], the basic settings screen will
appear.
Preparation
Turn on the TV and select the appropriate
video input.
1
Press [Í].
Setup screen appears.
2
Follow the on-screen instructions to
continue with the settings.
Easy Network Setting
After completing “Easy Settings”, you can perform
“Easy Network Setting”.
Select “Wired” or “Wireless” and press [OK].
If your SSID is not displayed;
≥ Search again by pressing the red button on the
remote control.
≥ Stealth SSIDs will not be displayed; in this case,
enter manually by using “Manual setting”.
Press [HOME]
> press [OK] to select “Setup”
> select “Player Settings”
> select “Network” and press [OK]
> select “Network Settings” and press [OK]
> select “Wireless Settings” and press [OK]
> select “Connection Setting” and press [OK]
> select “Manual setting” and press [OK]
If your wireless network is encrypted;
Encryption Key input screen will be displayed.
Input the encryption key of your network.
If your wireless router is supports WPS (Wi-Fi
Protected SetupTM);
You can easily set up a connection by pressing
the green button on the remote control.
Easy Network Setting
Select a connection mode.
Wired
Wireless
OK
RETURN
Follow the on-screen instructions to establish
your connection settings.
≥ Refer to the operating instructions of the hub or router.
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Using these networks may be regarded as illegal
access.
≥ If you have trouble getting online on your PC after
performing network settings on this unit, perform the
network settings on your PC.
≥ Please be aware that connecting to a network without
encryption may result in the leaking of data such as
personal or secret information.
* SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network. Transmission
is possible if the SSID matches for both devices.
SQT0099
13
Connections and settings
The following settings can be performed anytime
in the Setup menu. (> 28, 29)
Before beginning wireless connection setup
≥ Obtain your network name (SSID*).
≥ If your wireless connection is encrypted, please
be sure that you know your encryption key.
DMP-BDT460&360_EBGNGA-SQT0099.book 14 ページ
2014年1月28日 火曜日 午後3時57分
Inserting or removing
media
Playback
Firmware updates
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
e.g., [BDT460_for_the_United_Kingdom_and_Ireland]
USB1
USB2
SD CARD
Firmware Update
New Version:
X.XX
Current Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
Yes
No
OK
RETURN
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, “FIN” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.
The firmware has been updated.
Current Version: x.xx
RETURN
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 30,
“Firmware Version Information”)
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 30)
14
SQT0099
Notes
≥ When inserting a media item, ensure that it is
facing the correct way, which is the right side
facing up.
≥ [BDT460] [BDT360_for_Australia_and_New_Zealand]
When removing the SD card, press the centre
of the card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
[For[the[United[Kingdom,[Ireland[and[South[East[Asia]
≥ When you connect a USB HDD, use the right
USB port (USB2).
CAUTION
Do not place objects in front of the unit. The disc
tray may collide with objects when it is opened,
and this may cause malfunction.
DMP-BDT460&360_EBGNGA-SQT0099.book 15 ページ
2014年1月28日 火曜日 午後3時57分
HOME menu
Videos/Photos/Music
Major functions of this unit can be operated from
the HOME menu.
Disc
Preparation
Turn on the TV and select the appropriate video
input.
USB
≥ After network service introduction banner is
shown, the HOME menu is displayed.
– When connected to the network, the
banner content may be changed.
– You can disable the “Start-up Banner”
(> 30).
2
Press [OK] or [3, 4, 2, 1] to select the
item.
≥ If there are any other items, repeat this
step.
SD Card
≥ “USB1” indicates the
left USB port, while
“USB2” indicates the
right one. (> 14)
Network
Network Service
Displays the Home
Screen of Network
Service. (> 20)
Connections and settings
Press [Í] to turn on the unit.
[BDT460]
[BDT360_for_Australia_and_New_
[For[the[United[Kingdom,[Ireland[and[
Zealand]
South[East[Asia]
DLNA Client (> 21)
HOME
Network
Blu-ray Disc Player
Photos
Setup
Home Network
Music
Miracast (> 21)
Media Renderer (> 22)
Videos
Setup
Register
1st user
Setup
Player Settings
(> 25)
USB Management
(> 19)
[For[South[East[Asia]
USB Sharing
(> 23)
Wallpaper
Changes the background
of HOME menu.
To show the HOME menu
Press [HOME].
≥ Items to be displayed may vary with the media.
≥ Where necessary, set “Mixed Data Disc Option” when
using a disc with both data files (MP3, JPEG, MKV, etc.)
and Video (BDAV and AVCHD). (> 29)
SQT0099
15
Playback
1
Play back the contents.
(> 17)
≥ When multiple contents
are recorded, select the
types of contents or the
title.
DMP-BDT460&360_EBGNGA-SQT0099.book 16 ページ
2014年1月28日 火曜日 午後3時57分
Multi User Mode
Multi User Mode allows individuals to customize
settings and switch to their saved settings easily.
Up to four people can use the unit with their own
settings.
The following settings can be personalized:
≥ The user icon
≥ The wallpaper of HOME menu
≥ The specific settings (> 24, 25)
Personalizing a new user
1
2
Press [HOME].
3
Select an item and change the settings
according to the indications.
The following items can be set.
Press the coloured button that indicates
new user personalization.
Input
Nickname
Personalize a user name.
Personalize a user icon.
A
HOME
User 1
Network
Blu-ray Disc Player
Select Icon
Photos
Setup
Music
Videos
Setup
User 1
B
Register
2nd user
A The user name and icon currently selected
B Personalize a new user and switch between
users with coloured buttons.
Select
Wallpaper
4
Select from Illustrations
The image can be selected from
prepared illustrations.
Create from Photos
You can select a photo in
recording media as an icon.
(> 24, “Icon Registration”)
Personalize a background of the
HOME menu.
≥ In addition to the default
wallpapers, you can select a
photo in recording media as a
wallpaper. (> 24, “Wallpaper”)
Select “Confirm” and press [OK].
To change the personalized user information
Select “Edit User Information” from Setup menu.
(> 29)
Switching the user
information
Press the coloured buttons in the HOME menu
to switch to the user information
corresponding to the button.
16
SQT0099
2014年1月28日 火曜日 午後3時57分
Playback
1
Insert the media.
Playback starts depending on the media.
2
Select the item to play and press [OK].
Repeat this step if necessary.
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫STOP] when you have finished
playback to protect the unit’s motor, your TV screen and so
on.
≥ [BDT460] When the following conditions are met, a still
picture will be played back in 4K. The resolution of the still
picture will be changed automatically.
– The unit is connected to a 4K compatible TV
– “HDMI Video Format” is set to “Automatic” (> 26)
– The still picture is being played back in 2D
≥ It is not possible to play back AVCHD and MPEG2 videos
which have been dragged and dropped or copied and
pasted to the media.
≥ To save on electricity, this unit is turned off automatically if
there is no button operation for about 20 minutes when not
playing back (such as when paused or displaying the
menu, displaying still pictures, etc.).
Operations during playback
The following functions may not work depending
on the media and contents.
Stop
Press [∫STOP].
The stopping point is memorized.
Resume play function
Press [1PLAY] to restart from this point.
≥ The point is cleared if the media is removed.
≥ On BD-Video discs including BD-J, the
resume play function does not work.
Pause
Search/Slow motion
Search
While playing, press [SEARCH6] or
[SEARCH5].
Slow motion
While paused, press [SEARCH5].
The speed increases up to 5 steps.
≥ Music, MP3, etc.: The speed is fixed to a single
step.
≥ Press [1PLAY] to revert to normal playback
speed.
Skip
While playing or paused, press [:] or
[9].
Skip to the title, chapter or track.
Frame-by-frame
While paused, press [1] (;1).
≥ Press and hold to fast forward.
≥ Press [1PLAY] to revert to normal playback
speed.
Changing audio
Press [AUDIO].
You can change the audio channel number or
soundtrack language, etc.
Show top menu/pop-up menu
Press [TOP MENU] or [POP-UP MENU].
Select the item and press [OK].
Press [;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart
play.
SQT0099
17
Playback
DMP-BDT460&360_EBGNGA-SQT0099.book 17 ページ
DMP-BDT460&360_EBGNGA-SQT0099.book 18 ページ
2014年1月28日 火曜日 午後3時57分
Enjoying 3D video and photos
Show the status messages
While playing, press [STATUS].
The status messages give you information about
what is currently being played. Each time you
press [STATUS], the display information may
change or disappear from the screen.
≥ Depending on media and contents, the display
may change or not appear.
e.g., BD-Video
B
A
T1
C1
BD-Video
0:05.14
Play
0:20.52
C
A
B
C
D
D
T: Title, C: Chapter, PL: Playlist
Elapsed time in the title
Current position
Total time
e.g., JPEG
Date
Size
Manufacturer
Equipment
18
SQT0099
11.12.2007
500 X 375
1 / 26
Preparation
Connect this unit to a 3D compatible TV. (> 10)
≥ Perform the necessary preparations for the TV.
≥ Play back following the instructions displayed
on the screen.
≥ 3D Settings (> 25, 27)
≥ Please refrain from viewing 3D images if you do not feel
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or
other discomfort while viewing 3D images, discontinue use
and rest your eyes.
≥ 3D video might not output the way it is set in “HDMI Video
Format” and “24p(4K)/24p Output” (> 26).
≥ When playing back 3D photos from “Photos” screen, select
from the “3D” list. (Still pictures in “2D” are played back in
2D.)
If “2D” and “3D” indications are not displayed, press the
red button on the remote control to switch the view of
playback contents.
DMP-BDT460&360_EBGNGA-SQT0099.book 19 ページ
2014年1月28日 火曜日 午後3時57分
Enjoying BD-Live
With “BD-Live” discs, you can enjoy bonus
contents that use Internet access.
For this BD-Live function, connection of a USB
device is necessary along with Internet
connection.
[For[the[United[Kingdom,[Ireland[and[South[East[Asia]
≥ When USB devices are connected to both USB
ports, disconnect both of them first, and then
connect only the one you want to use.
1
Perform network connection and settings.
(> 12, 13)
2
Connect a USB device with 1 GB or more
free space.
≥ The USB device is used as the local
storage.
3
Insert the disc.
Slideshow
Play a slideshow of photos and adjust various
settings during the playback.
1
2
3
Select “Photos”.
Select an item and press the green button.
The following items can be set.
Start
Slideshow
Start the slideshow.
You can display still pictures in
the selected folder one by one
at a constant interval.
Interval
Change the display interval.
Transition
Effect
Select the effect when sliding
pictures.
Repeat Play
Set whether to repeat the
slideshow.
∫ Deleting data on the USB device
Select “USB Management” in the HOME menu
(> 15), then select “BD-Video Data Erase” and
press [OK].
Insert the media.
≥ Still pictures displayed as “
with this unit.
” cannot be played back
Playback
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
≥ “BD-Live Internet Access” may need to be changed for
certain discs (> 28).
SQT0099
19
DMP-BDT460&360_EBGNGA-SQT0099.book 20 ページ
2014年1月28日 火曜日 午後3時57分
Enjoying Network
Service
Network Service allows you to access some
specific websites supported by Panasonic.
Network Service provides a variety of
selected Internet services such as the
following.
≥ Online movie rental service
≥ Video browsing service
*
XXXXX
X
XXXXXXXX
XXXXXX
XXXXX
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXX
MORE
XXXXXXXXXXX
XXXXXX, XXXX
BACK
39°C
XXXXXXXX
Market
XXXX
XXXX
Internet
* Images are for illustration purposes, contents may change
without notice.
Preparation
≥ Network connection (> 12)
≥ Network settings (> 13)
1
Press [INTERNET].
[For[the[United[Kingdom[and[Ireland]
≥ Netflix can be accessed directly by
pressing [NETFLIX] button.
2
Select the item and press [OK].
To exit from Network Service
Press [HOME].
20
SQT0099
≥ When playing content in the media, Network Service
cannot be accessed by pressing [INTERNET].
≥ In the following cases, settings are possible using the
Setup menu items.
– When restricting the use of Network Service
(> 29, “Network Service Lock”)
– When correcting the displayed time
(> 28, “Time Zone”, “Summer Time”)
– When using another device such as a smartphone in
combination with the unit by using a certain app on the
device
(> 28, “Remote Device Operation”)
≥ When using a slow Internet connection, the video may not
be displayed correctly. A high speed Internet service with a
speed of at least 6 Mbps is recommended.
≥ Be sure to update the firmware as soon as a firmware
update notice is displayed on the screen. If the firmware is
not updated, you may not be able to use Network Service
function properly. (> 14)
≥ Network Service Home Screen is subject to change
without notice.
≥ The services through Network Service are operated by
their respective service providers, and service may be
discontinued either temporarily or permanently without
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
≥ Some features of websites or content of the service may
not be available.
≥ Some content may be inappropriate for viewers.
≥ Some content may only be available for specific countries
and may be presented in specific languages.
2014年1月28日 火曜日 午後3時57分
Home Network feature
Before using the following features, be sure to
configure the connected equipment on your
Home Network.
Using MiracastTM
You can enjoy the content you are viewing on a
Miracast-compatible smartphone, etc. on the big
screen of your TV.
≥ Compatible with AndroidTM devices, ver. 4.2
and above and Miracast certified.
For information on whether the smartphone,
etc. supports Miracast, contact the
manufacturer of the device.
Player
1
2
Miracast compatible
device
Press [MIRACAST].
Operate the Miracast compatible device.
≥ On the device, enable Miracast and select
this unit (DMP-BDT460 or DMP-BDT360)
as the device to be connected.
For details, refer to the instructions
supplied with the device.
Playing back contents on the
DLNA server
You can share photos, videos and music stored in
the DLNA Certified media server [PC with
Windows 7 installed, smartphone, recorders
(DIGA), etc.] connected to your home network.
≥ About support format of DLNA (> 36).
Player
Server
Preparation
1 Perform network connection (> 12) and
network settings (> 13) of this unit.
2 Add the contents and folder to the libraries of
the Windows Media® Player or the
smartphone, etc.
≥ Playlist of Windows Media® Player can play
back only the contents that are stored in the
libraries.
≥ When connected to DIGA, register this unit to
your DIGA.
1
2
3
4
Press [HOME].
Select “Network”.
Select “Home Network”.
Select “DLNA Client”.
≥ The list can be updated by pressing the red
button on the remote control.
≥ The connection method can be switched to
Wi-Fi Direct by pressing the green button
on the remote control.
To exit from Miracast
Press [HOME].
5
6
Select the equipment and press [OK].
Select the item to play and press [OK].
≥ You may be able to use convenient
functions depending on the content by
pressing [OPTION].
To exit from Home Network
Press [HOME].
SQT0099
21
Playback
DMP-BDT460&360_EBGNGA-SQT0099.book 21 ページ
DMP-BDT460&360_EBGNGA-SQT0099.book 22 ページ
2014年1月28日 火曜日 午後3時57分
“HDMI CEC”
Using the Digital Media
Controller
You can use a smartphone or tablet as the Digital
Media Controller (DMC) to playback contents
from DLNA server on the Renderer (this unit).
Possible applications:
This unit supports “HDMI CEC” (Consumer
Electronics Control) function.
You can use this function by connecting the
equipment with an HDMI cable*.
See the operating instructions for connected
equipment for operational details.
* [BDT460] Only when connecting via an HDMI AV OUT
MAIN terminal on this unit.
Renderer
*
Server
Controller
*
Server
Renderer
*
+
Controller
* DMC compatible software should be installed.
Preparation
Perform steps 1 and 2. (> 21)
3 Perform the “Remote Device Settings”.
(> 28)
≥ You can register up to 16 devices.
1
2
3
4
5
6
Press [HOME].
Select “Network”.
Select “Home Network”.
Preparation
1 Set “HDMI CEC” to “On” (> 29).
(The default setting is “On”.)
2 Set the “HDMI CEC” operations on the
connected equipment (e.g., TV).
3 Turn on all “HDMI CEC” compatible
equipment and select this unit’s input channel
on the connected TV so that the “HDMI CEC”
function works properly.
Repeat this procedure when the
connections or settings are changed.
Automatic input switching
Power on link
When the unit starts playback, the TV will
automatically switch the input channel and the
screen of the unit will be displayed.
Additionally when the TV is off, the TV will
automatically turn on.
Select “Media Renderer”.
Select “Home Network” or “Wi-Fi Direct”
and press [OK], then follow the
indications on the screen.
Operate the DMC compatible devices.
To exit from Media Renderer screen
Press [HOME].
About DLNA and Media Renderer
For more details, refer to the following website and the
operating instructions for each of the equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ Wi-Fi Direct connection while using Home Network feature
is only temporary, and the network connection method
returns to the original setting when exiting.
≥ Depending on the device or connection environment, the
data transfer rate may decrease.
≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ Items displayed in grey on the display cannot be played
back by this unit.
22
SQT0099
Power off link
All connected equipment compatible with “HDMI
CEC”, including this unit, automatically turns off
when you switch the TV off.
≥ This unit supports the “HDMI CEC” (Consumer Electronics
Control) function. However, operation cannot be
guaranteed on all HDMI CEC devices.
DMP-BDT460&360_EBGNGA-SQT0099.book 23 ページ
2014年1月28日 火曜日 午後3時57分
USB Sharing
[For[South[East[Asia]
This function allows you to copy content
between the following media.
Disc
USB1
USB1/
USB2
USB2
≥ You cannot set the media formatted to NTFS as a copy
destination.
≥ Copying of files in all formats is not guaranteed.
≥ Videos on discs and copyrighted content on discs cannot
be copied.
≥ Panasonic does not accept any responsibility for damages
directly or indirectly due to any type of problems that result
in loss of copying content (data), and does not guarantee
any content if copying does not work properly.
≥ The recording and playback of content on this or any other
device may require permission from the owner of the
copyright or other such rights in that content. Panasonic
has no authority to and does not grant you that permission
and explicitly disclaims any right, ability or intention to
obtain such permission on your behalf. It is your
responsibility to ensure that your use of this or any other
device complies with applicable copyright legislation in
your country. Please refer to that legislation for more
information on the relevant laws and regulations involved
or contact the owner of the rights in the content you wish to
record or playback.
Preparation
≥ Insert the media. (> 14)
1
2
Press [USB SHARING].
3
Select the folder or file to be copied and
press the red button on the remote
control.
≥ Press the red button on the remote control
again to cancel.
4
5
Press [OK].
6
Select “Yes” on the confirmation screen
and press [OK].
Playback
Select the copy source (e.g., USB1) and
press [OK].
Select the copy destination (e.g., USB2)
and press [OK].
≥ When the destination contains a folder or
file with the same name, you can change
the option for resolving the conflict by
pressing [OPTION].
SQT0099
23
DMP-BDT460&360_EBGNGA-SQT0099.book 24 ページ
2014年1月28日 火曜日 午後3時57分
Option menu
Settings
A variety of playback operations and settings can
be performed from this menu.
Available options differ depending on the playing
contents and the condition of the unit.
About Multi User Mode
: Settings of the items with this indication are
saved by the respective users registered in the
HOME menu. (> 16)
1
Press [OPTION].
≥ When playing music, select “Playback
Settings” and press [OK].
e.g., BD-Video
Operation Menu
Soundtrack
1 ENG Dolby TrueHD 3/...
Subtitle
–
Angle
Off
Repeat Play
∫ Repeat Play
Select the item that you want to repeat.
≥ You can repeat the playback of a chapter,
playlist, the entire disc, etc., but the items
displayed will differ depending on the type of
the media.
≥ Select “Off” to cancel.
∫ Random
Select whether or not to play random.
∫ Start Slideshow
Start the slideshow.
∫ Status
Show the status messages.
∫ Rotate RIGHT
∫ Rotate LEFT
Rotate the still picture.
∫ Wallpaper
Set the still picture to the wallpaper of HOME
menu. (> 15)
Status
Primary Video
1MPEG-4 AVC
Secondary Video
Zoom
Top Menu
∫ Icon Registration
Set the still picture as your user icon. (> 16)
Pop-up Menu
2
∫ Video
The recording method of original video appears.
Select an item and change the settings.
To exit the screen
Press [OPTION].
∫ Primary Video
The recording method of original primary video
appears.
∫ Secondary Video
Regarding Language : (> 36)
Operation Menu
∫ Soundtrack
Show or change the soundtrack.
∫ Audio channel
Select the audio channel number.
∫ Subtitle
Change the subtitle settings.
∫ Angle
Select the number of the angle.
Video
Select on/off for images. The
recording method of original
video appears.
≥ During search/slow motion
or frame-by-frame, only the
primary video is displayed.
Soundtrack
Select on/off for audio and the
language.
∫ Zoom
Videos and pictures are magnified.
∫ Top Menu
Display Top Menu.
∫ Pop-up Menu
Display Pop-up Menu.
∫ Menu
Display Menu.
24
SQT0099
DMP-BDT460&360_EBGNGA-SQT0099.book 25 ページ
2014年1月28日 火曜日 午後3時57分
Picture Settings
∫ Picture Mode
Select the picture quality mode during play.
≥ If you select “User”, you can change settings in
“Picture Adjustment”.
∫ Picture Adjustment
Specific picture quality settings can be changed.
∫ Progressive
Select the method of conversion for progressive
output to suit the type of material being played.
≥ If the video is disrupted when “Auto” is
selected, select either “Video” or “Film”
depending on the material to be played back.
∫ 24p
Movies and other material recorded on
DVD-Video at 24p are output at 24p.
≥ Only when you have selected “24p(4K)” or
“24p” in “24p(4K)/24p Output” (> 26) and play
discs recorded at a rate of 60 fields per second.
≥ This may not work with the PAL contents.
Setup menu
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
Some items are common to the Option menu. You
can get the same effect with both menus.
About Multi User Mode
: Settings of the items with this indication are
saved by the respective users registered in the
HOME menu. (> 16)
1
2
3
Press [HOME].
Press [OK] to select “Setup”.
Select “Player Settings”.
Player Settings
Picture
Picture Mode
Normal
Picture Adjustment
Sound
HDMI Output
3D
Language
Network
Ratings
∫ Reset to Default Picture Settings
Return picture settings to the factory defaults.
System
OK
RETURN
∫ Signal Format
Original
Keep original picture format.
Side by side
3D picture format comprising
of left and right screens.
2D to 3D
Converts 2D pictures to 3D
effect.
∫ Distance
Set the amount of depth perception.
4
Select an item and change the settings.
To exit the screen
Press [HOME].
Picture
∫ Picture Mode
(> left)
∫ Picture Adjustment
Settings
3D Settings
(> left)
∫ Graphic Display Level
3D position for the Option menu or message
screen, etc. can be adjusted during 3D playback.
SQT0099
25
DMP-BDT460&360_EBGNGA-SQT0099.book 26 ページ
2014年1月28日 火曜日 午後3時57分
∫ HDMI Output
Press [OK] to show the following settings:
¾HDMI Video Format
The items supported by the connected devices
are indicated on the screen as “¢”. When any
item without “¢” is selected, the images may be
distorted.
≥ If “Automatic” is selected, the best suited
output resolution to the connected TV is
automatically selected.
≥ To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
TV). If this unit is connected to an HDTV
through other equipment, the other equipment
must also be 1080p compatible.
¾24p(4K)/24p Output
This setting is for selecting the output method
for content recorded in 24p*1, such as movies.
24p(4K)
Outputs signals by upconverting
them to 4K*2.
24p
Outputs in 24p.
≥ Connect the compatible TV for each (4K or
1080/24p) output to the HDMI AV OUT MAIN
[BDT460]/HDMI AV OUT [BDT360] terminal of
this unit.
≥ “24p(4K)” works only when playing back in
2D.
≥ When playing DVD-Video, set this setting to
“24p(4K)” or “24p”, and then “24p” in “Picture
Settings” (> 25) to “On”.
≥ When BD-Video/DVD-Video images other
than 24p are played, images are output at
60p.
¾HDMI Colour Mode
This setting is for selecting colour-space
conversion of the image signal.
¾Deep Colour Output
This setting is for selecting whether to use Deep
Colour Output when a TV that supports Deep
Colour is connected.
¾Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
26
SQT0099
¾ HDMI(SUB) Output Mode [BDT460]
Set to output the video from the HDMI AV OUT
SUB terminal or not.
*1
*2
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in
accordance with the film materials.
A high resolution image/display technology of
approximately 4000 (width) k 2000 (height) pixels.
Sound
∫ Dynamic Range Compression
You can listen at low volumes but still hear
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥ “Automatic” is effective only when playing
Dolby TrueHD.
∫ Digital Audio Output
Press [OK] to show the following settings:
¾ Dolby D/Dolby D +/Dolby TrueHD
¾ DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected
equipment cannot decode the respective
audio format. This unit decodes the audio
format and transmits to the connected
equipment.
≥ If you do not make proper settings the audio
may be static or noisy.
¾ BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
¾ HDMI Audio Output
This setting selects whether or not to output
audio from HDMI.
≥ Select “Off” when the TV is connected to this
unit via HDMI AV OUT terminal, and this unit
is also connected to other devices, such as
an amplifier/receiver via an OPTICAL
terminal.
DMP-BDT460&360_EBGNGA-SQT0099.book 27 ページ
2014年1月28日 火曜日 午後3時57分
∫ PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz for the PCM output from the
OPTICAL.
≥ If “On” is selected, the signals that are
converted to 48 kHz are output.
≥ If “Off” is selected, and the connected
equipment does not support 96 kHz, the sound
will not be output normally.
≥ Signals are converted to 48 kHz despite the
settings in the following cases:
– when the signals have a sampling frequency
of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to
“On”
3D
∫ 3D BD-Video Playback
Select the playback method of 3D compatible
video software.
∫ 3D AVCHD Output [BDT460]
[BDT360_for_Australia_and_New_Zealand]
Select the output method of 3D AVCHD videos.
∫ 3D Playback Message
Set to display or hide the 3D viewing warning
screen when playing back the 3D compatible
video software.
∫ Graphic Display Level
(> 25)
∫ Downmix
∫ DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch).
≥ This function works when the following
conditions are met:
– Audio is output from the HDMI AV OUT
terminal.
– Audio recorded at 96 kHz or lower is output.
– “Digital Audio Output” is set to “PCM” when
audio other than PCM is output.
Language
∫ Soundtrack Preference
Choose the language for audio.
≥ If “Original” is selected, the original language of
each disc will be selected.
≥ Enter a code (> 36) when you select “Other
¢¢¢¢”.
∫ Subtitle Preference
Choose the language for the subtitle.
≥ If “Automatic” is selected and the language
selected for “Soundtrack Preference” is not
available, subtitles of that language will
automatically appear if available on that disc.
≥ Enter a code (> 36) when you select “Other
¢¢¢¢”.
∫ Menu Preference
Choose the language for the disc menus.
≥ Enter a code (> 36) when you select “Other
¢¢¢¢”.
[Except[South[East[Asia]
∫ Subtitle Text
Select a desired item according to the language
used for MKV/Xvid subtitles text.
≥ This item is displayed only after playing back a
file.
[Except[Australia[and[New[Zealand]
∫ On-Screen Language
Choose the language for menus and on-screen
messages.
SQT0099
27
Settings
Select the downmix system of multi-channel to
2-channel sound.
≥ Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
≥ The downmix effect is not available when
“Digital Audio Output” is set to “Bitstream”.
≥ The audio will be output in “Stereo” in the
following cases:
– AVCHD playback
– Playback of secondary audio (including the
button click sound).
DMP-BDT460&360_EBGNGA-SQT0099.book 28 ページ
2014年1月28日 火曜日 午後3時57分
Network
∫ Easy Network Setting (> 13)
∫ Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
¾LAN Connection Mode
Select the LAN connection method.
≥ Select “Wireless Master” when you make a
direct wireless connection between this unit
and a Home Network device. Internet
connection is not available when this item is
selected.
¾Wireless Settings
This allows the wireless router and connection
settings to be set up. Current connection
settings and connection state can be checked.
Press [OK] to show the following settings:
Connection Setting
The wireless router connection wizard will be
displayed.
Double Speed Mode Setting (2.4GHz)
Set the connection speed for a 2.4 GHz
wireless format.
≥ If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the same
frequency band, and there is consequently
a greater risk of reception interference. This
can cause the connection speed to drop or
become unstable.
¾IP Address / DNS Settings
This is for checking the state of the network
connection and setting the IP address and
DNS-related.
Press [OK] to show the respective setting.
¾Proxy Server Settings
This is for checking the state of connection with
the Proxy server and performing settings.
Press [OK] to show the respective setting.
¾ Network Service Settings (> 20)
Press [OK] to show the following settings:
Time Zone
Set the unit’s time to match your location.
≥ Some Network Service contents require the
time zone to be set. Set time zone if
necessary.
Summer Time
Select “On” when using summer time.
[Except[South[East[Asia]
¾ Network Drive Connection
It is possible to access the shared folder of
equipment not compatible with DLNA, such as
the Windows XP operating system, and play
back video, still pictures, and music on this unit.
For the setting and operation method of
connected equipment, refer to the following
website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
¾ Remote Device Settings (> 20, 22)
Press [OK] to show the following settings:
Remote Device Operation
Enable to operate the unit by DMC, etc.
≥ If “On” is selected, “Quick Start” will be
activated.
Device Name Entry
Set the name of this unit to be displayed on
the connected equipment.
Registration Type
Automatic
Allow connections to all the
equipment accessing this unit.
Manual
Set the permission for
individual equipment
connections accessing this unit.
Remote Device List
Registering/deregistering of the displayed
equipment can be performed when “Manual”
in “Registration Type” is selected.
¾ BD-Live Internet Access (> 19)
You can restrict Internet access when BD-Live
functions are used.
≥ If “Limit” is selected, Internet access is
permitted only for BD-Live contents which
have content owner certificates.
28
SQT0099
DMP-BDT460&360_EBGNGA-SQT0099.book 29 ページ
2014年1月28日 火曜日 午後3時57分
¾ Screen Saver Function
Ratings
The following items use the same password.
Don’t forget your password.
∫ DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
∫ BD-Video Ratings
Set an age limit of BD-Video play.
∫ Network Service Lock
You can restrict the usage of Network Service.
System
∫ Easy Settings
You can execute basic settings.
∫ TV Settings
Press [OK] to show the following settings:
¾TV Aspect
¾ On-Screen Messages
Choose whether to show status messages
automatically.
¾ HDMI CEC
Set to use “HDMI CEC” function when
connected via HDMI cable to a device that
supports “HDMI CEC”.
≥ Select “Off” when you do not want to use
“HDMI CEC”.
∫ Unit Settings
Press [OK] to show the following settings:
When connected to a 4:3 aspect TV and playing
16:9 ratio image:
The sides are
cut off so the
picture fills
4:3 Pan & Scan the screen.
When playing BD-Video,
video is output as “4:3
Letterbox”.
Black bands
appear at
the top and
bottom of
the picture.
When connected to a 16:9 widescreen TV and
playing 4:3 ratio image:
16:9
Video is displayed as a 4:3
ratio image in the centre of
the screen.
16:9 full
Video is displayed as a
horizontally stretched 16:9
image.
¾ Mixed Data Disc Option
Select the playback contents on discs with both
data files and Video.
≥ If “MP3/JPEG/MKV” is selected, data file can
be played back.
≥ If “BDAV/AVCHD” is selected, BDAV and
AVCHD can be played back.
¾ Front Panel Display
Changes the brightness of the unit’s display.
≥ If “Automatic” is selected, the display is set to
bright and only dimmed during playback.
¾ Blue LED
[BDT460] [BDT360_for_Australia_and_New_Zealand]
Set whether to light the blue LED in the centre
of this unit when turned ON.
¾ HDMI(SUB) V.OFF LED Control [BDT460]
Set to light the HDMI (SUB) V.OFF LED or not.
≥ This will light when “HDMI(SUB) Output
Mode” (> 26) is set to “V.OFF(Video Off)”.
¾ Edit User Information
Change the user information registered in the
HOME menu.
¾ TV System
Perform the setup so it matches the TV System
of the connected TV.
SQT0099
29
Settings
Set to match the type of TV connected.
4:3 Letterbox
This is to prevent image retention on the
screen.
≥ When this is set to “On”:
If a list of playback content is displayed and
there is no operation for 10 minutes or more,
the screen switches to HOME menu
automatically.
≥ While playing and pausing, etc., this function
is not available.
DMP-BDT460&360_EBGNGA-SQT0099.book 30 ページ
2014年1月28日 火曜日 午後3時57分
∫ Start-up Banner
Select whether to display the banner after turning
on this unit. (> 15)
∫ Quick Start
Speed of start-up from standby mode is
increased.
≥ When set to “On”, the internal control unit will be
powered and the idle power consumption will
increase so compared to when set to “Off”.
(Power consumption > 35)
Troubleshooting guide
Reference
Before requesting service, please perform the
following checks.
If the problem remains unresolved, consult
your dealer for instructions.
∫ Unit does not respond to remote
control or unit’s buttons.
Disconnect the AC mains lead, wait 1 minute,
then reconnect the AC mains lead.
∫ Remote Control
Change the remote control code if other
Panasonic products react to this remote control.
∫ Firmware Update (> 14)
Do you have the latest firmware installed?
Panasonic is constantly improving the unit’s
firmware to ensure that our customers are
enjoying the latest technology. (> 14)
Press [OK] to show the following settings:
¾Automatic Update Check
When this equipment remains connected to the
Internet, it will check for the latest firmware
version when it is turned on and you can update
it if necessary.
¾Update Now
You can update the firmware manually if a
firmware update is available.
∫ System Information
Press [OK] to show the following settings:
¾Software Licence
Information about the software used by this unit
is displayed.
¾Firmware Version Information
Display firmware version of this unit and
wireless LAN module.
∫ Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, on-screen language*, etc.
* [Except[Australia[and[New[Zealand]
30
SQT0099
The following do not indicate a problem with
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
– Image disturbance when replacing 3D discs.
∫ Cannot eject disc.
1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
3 Press [1] (right) repeatedly on the remote
control until “06 FTO” is displayed on the
unit’s display.
4 Press [OK].
General operation
To return to the factory defaults.
¾ Select “Yes” in “Default Settings” in the Setup
menu. (> left)
To return all settings to the factory preset.
¾ Reset the unit as follows:
1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
3 Press [1] (right) repeatedly on the remote
control until “08 FIN” is displayed on the unit’s
display.
4 Press and hold [OK] for more than 5 seconds.
DMP-BDT460&360_EBGNGA-SQT0099.book 31 ページ
2014年1月28日 火曜日 午後3時57分
The remote control does not work properly.
¾ Change the batteries in the remote control.
(> 5)
¾ The remote control and this unit are using
different codes.
If “SET ” is displayed on the unit’s display
when a button is pressed on the remote
control, change the code on the remote
control.
Press and hold [OK] and the displayed
number (“”) for more than 5 seconds.
This unit does not recognize the USB
connection correctly.
¾ Disconnect and re-connect the USB cable. If
it still does not recognize the connection, turn
this unit off and on again.
¾ USB devices may not be recognized by this
unit when connected using the following :
– a USB hub
– a USB extension cable
¾ If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
[For[the[United[Kingdom,[Ireland[and[South[East[Asia]
The TV screen turns black.
¾ In the following cases, HDMI authentication
takes place and a black screen is displayed:
– When “24p(4K)/24p Output” is set to
“24p(4K)” or “24p”.
– When the display is switched between 2D
and 3D images.
– [BDT460] When you quit the 4K playback of a
still picture by displaying another screen,
including the Home menu.
Picture
The images from this unit do not appear on
the TV.
Picture is distorted.
¾ An incorrect resolution is selected in “HDMI
Video Format”. Reset the setting as follows:
1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
3 Press [1] (right) repeatedly on the remote
control until “04 PRG” is displayed on the
unit’s display.
4 Press and hold [OK] for more than
5 seconds.
Set the item again. (> 26)
– When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD® audio are not output properly,
select “Yes” in “Default Settings” (> 30) and
make proper settings.
¾ The unit and TV are using different video
systems.
1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
3 Press [1] (right) repeatedly on the remote
control until “05 P/N” is displayed on the unit’s
display.
4 Press and hold [OK] for more than 5 seconds.
The system switches from PAL to NTSC or
vice versa.
SQT0099
31
Settings
You have forgotten your ratings password.
You want to cancel the ratings level.
¾ The ratings level returns to the factory
defaults.
1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
3 Press [1] (right) repeatedly on the remote
control until “03 VL” is displayed on the unit’s
display.
4 Press [OK].
¾ When you connect a USB HDD, use the right
USB port (USB2). (> 14)
Reference
The TV tuner mode is not displayed when the
TV is turned on.
¾ This phenomenon may occur, depending on
the TV setting, when “Quick Start” is set to
“On”.
¾ Depending on the TV, this phenomenon may
be prevented by reconnecting the HDMI cable
to a different HDMI input terminal or by
changing the HDMI auto connection setting.
DMP-BDT460&360_EBGNGA-SQT0099.book 32 ページ
2014年1月28日 火曜日 午後3時57分
¾ PAL discs cannot be correctly viewed on an
NTSC TV.
¾ When “3D BD-Video Playback” in the Setup
menu is set to “Automatic”, images may not
be output depending on the connection
method. After removing the disc from this
unit, select “Set before play” in the Setup
menu, and select “2D Playback” in the setup
screen displayed when playing 3D discs.
(> 27)
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
¾ Confirm the “TV Aspect” is set properly.
(> 29)
¾ Adjust the aspect setting on the TV.
¾ When outputting in 24p (4K), images may be
distorted depending on the HDMI cable. Use
an HDMI cable that supports 4K output.
Cannot switch audio.
¾ The audio cannot switch, if “Digital Audio
Output” is set to “Bitstream”. Set “Digital
Audio Output” to “PCM”. (> 26)
Video is not output. [BDT460]
¾ Video from the HDMI AV OUT SUB terminal
is not output when the “HDMI(SUB) Output
Mode” is set to “V.OFF(Video Off)”. (> 26)
Video is not output in high-definition.
¾ Confirm that “HDMI Video Format” in the
Setup menu is set properly. (> 26)
3D video is not output.
¾ Connect to a full high-definition TV.
¾ Is there a non-3D compatible amplifier/
receiver connected between this unit and a
TV? (> 10)
¾ [BDT460] If there is a non-3D compatible
amplifier/receiver connected to the HDMI AV
OUT SUB terminal, set the “HDMI(SUB)
Output Mode” to “V.OFF(Video Off)”. (> 11)
¾ Are the settings on this unit and the TV
correct? (> 18)
¾ Is the amplifier/receiver that is connected
between this unit and TV on?
¾ Depending on the connected TV, the video
being played back might switch to 2D video
due to changes in resolution etc. Check the
3D setting on the TV.
3D video is not output correctly as 2D.
¾ Select “Set before play” in the Setup menu,
and select “2D Playback” in the setup screen
displayed when playing 3D discs. (> 27, “3D
BD-Video Playback”)
¾ Discs that have recorded titles with Side by
side (2 screen structure) and that can be
enjoyed in 3D are played back in accordance
with the settings of the TV.
32
SQT0099
Audio
Cannot hear the desired audio type.
¾ Check the connections and the “Digital Audio
Output” settings. (> 10, 26)
¾ [BDT460] When connecting this unit to a TV
via an HDMI AV OUT MAIN and to an
amplifier/receiver via an HDMI AV OUT SUB,
set “HDMI(SUB) Output Mode” to
“V.OFF(Video Off)”. (> 11)
¾ To output audio from a device connected with
an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu. (> 26)
There is no sound coming out from the TV.
[BDT460]
¾ Audio may not output from the TV when the
amplifier/receiver is connected to the HDMI
AV OUT SUB, and “HDMI(SUB) Output
Mode” (> 26) is set to “V.OFF(Video Off)”. In
such a case, output audio from the amplifier/
receiver. To output audio from the TV, set the
“HDMI(SUB) Output Mode” to “Normal”.
2014年1月28日 火曜日 午後3時57分
Playback
Disc cannot be played.
¾ The disc is dirty. (> 5)
¾ The disc is not finalized. (> 7)
¾ Confirm the “Mixed Data Disc Option” is set
properly. (> 29)
Still pictures (JPEG) do not play back
normally.
¾ The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can’t play back BD-Live.
¾ Confirm that this unit is connected to the
broadband Internet. (> 12)
¾ Confirm the “BD-Live Internet Access”
settings. (> 28)
¾ Confirm a USB device is connected to the
USB port. (> 14)
¾ Connect this unit to the network by a wired
connection.
Network
I can’t connect to the network.
¾ Confirm the network connection and settings.
(> 12, 13, 28)
¾ There may be interference that prevents the
unit from detecting your home network. Place
the unit and the wireless router closer to each
other. This unit may be able to detect your
network name (> 13, “SSID”).
¾ Check the operating instructions for each
device and connect accordingly.
When using wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
¾ Higher transfer rate router such as 802.11n
(2.4 GHz or 5 GHz)* wireless router may
solve the problem. If you use 802.11n
(2.4 GHz or 5 GHz)* wireless router, it is
necessary to set the encryption type to
“AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
¾ On the “Wireless Settings” screen (> 28), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (> 13) again.
Messages on the screeen
Cannot play.
¾ You inserted an incompatible disc.
Cannot play on this unit.
¾ You tried to play a non-compatible image.
¾ Re-insert the media.
No disc inserted.
¾ The disc may be upside down.
$ This operation is not available.
¾ Some operations are unsupported by the unit.
(For example, reverse slow motion, etc.)
IP address is not set.
¾ The “IP Address” in “IP Address / DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Gateway
Address”. (Select the automatic address
acquisition if necessary.)
The wireless access point currently has a low
network security setting. It is recommended to
change to a higher setting.
¾ Set a stronger network security level referring
to the wireless router operating instructions.
Reference
DMP-BDT460&360_EBGNGA-SQT0099.book 33 ページ
* [For[Australia[and[New[Zealand] 2.4 GHz band only
SQT0099
33
DMP-BDT460&360_EBGNGA-SQT0099.book 34 ページ
2014年1月28日 火曜日 午後3時57分
Messages on the unit’s
display
NET
¾ While connecting to a network.
No PLAY
¾ There is a viewing restriction on a BD-Video
or DVD-Video. (> 29)
¾ The media is dirty or badly scratched. The
unit cannot play.
REMOVE
¾ The USB device is drawing too much power.
Remove the USB device.
SET 
(“ ” stands for a number.)
¾ The remote control and this unit are using
different codes. Change the code on the
remote control.
Press and hold [OK] and
the indicated number
button at the same time
for more than 5 seconds.
U59
¾ Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
Install or place this unit with good ventilation.
H or F
(“ ” stands for a number.)
¾ There is something unusual.
¾ Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
1 Disconnect the plug from the household
mains socket, wait a few seconds, then
reconnect it.
2 Press [Í/I] to turn the unit on.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
34
SQT0099
START
¾ The system is being restarted during the
firmware update. Please do not turn off the
unit.
UPD/
(“ ” stands for a number.)
¾ The firmware is being updated.
Please do not turn off the unit.
FIN
¾ The firmware update is complete.
[For[South[East[Asia]
¾ Copying is complete.
DMP-BDT460&360_EBGNGA-SQT0099.book 35 ページ
2014年1月28日 火曜日 午後3時57分
Specifications
File format
File format
General
Extension
Signal system
PAL/NTSC
Operating
temperature range
i5 oC to i35 oC
Operating humidity
range
10 % to 80 % RH (no condensation)
Digital audio output
Optical digital output (Optical terminal)
HDMI AV output
Output connector:
[BDT460] Type A (19 pin) 2 system
[BDT360] Type A (19 pin) 1 system
[BDT460] [BDT360_for_Australia_and_
New_Zealand]
SD card slot
1 system
USB slot
USB2.0:
[For[the[United[Kingdom[and[Ireland]
[For[South[East[Asia]
2 system
MKV
Xvid
≥ The video file and
subtitles text file are
[Except[South[East[Asia]
inside the same folder,
Subtitles text
and the file names are
file
the same except for the
“.SRT”, “.srt”,
file extensions.
“.SSA”, “.ssa”,
≥ Some MKV/Xvid files
“.ASS”, “.ass”
may not be played back
correctly, depending on
“.AVI”, “.avi”
the video resolution,
[Except[South[East[Asia]
frame rate condition,
Subtitles text
subtitle format and so
on.
file
“.SRT”, “.srt”,
“.SUB”, “.sub”,
“.TXT”, “.txt”
mp4
“.MP4”, “.mov”
(H.264+AAC)
MPEG
(TS/PS)
[For[Australia[and[New[Zealand]
Some mp4/MPEG files
may not be played back
correctly, depending on
“.mpg”, “.mpeg”, the video resolution,
“.m2ts”, “.mts”, frame rate condition and
“.ts”
so on.
1 system
Ethernet
Wireless LAN
JPEG
“.JPG”, “.jpg”,
“.jpeg”
≥ MOTION JPEG and
Progressive JPEG are
not supported.
≥ You may not be able to
play back the file if you
have edited the folder
structure or the file
name on a PC or other
device.
MP3
“.MP3”, “.mp3”
This unit supports ID3
tags, but only titles, artist
names and album names
can be displayed.
FLAC
“.FLAC”, “.flac”
Maximum sampling rate:
192 kHz/24 bit
WAV
“.WAV”, “.wav”
Maximum sampling rate:
192 kHz/24 bit
MPO
“.MPO”, “.mpo”
3D still picture
AAC
“.M4A”, “.m4a”,
“.AAC”, “.aac”
This unit supports ID3
tags.
Maximum sampling rate:
48 kHz/320 kbps
WMA
“.WMA”, “.wma”
This unit supports ID3
tags.
Maximum sampling rate:
48 kHz/355 kbps
10BASE-T/100BASE-TX 1 system
Standard Compliance:
[For[the[United[Kingdom[and[Ireland]
[For[South[East[Asia]
IEEE802.11 a/b/g/n
[For[Australia[and[New[Zealand]
IEEE802.11 b/g/n
Frequency range:
[For[the[United[Kingdom[and[Ireland]
[For[South[East[Asia]
2.4 GHz/5 GHz band
[For[Australia[and[New[Zealand]
2.4 GHz band
Security: WPATM/WPA2TM
(Encryption Type: TKIP/AES,
Authentication Type: PSK), WEP
(64 bit/128 bit)
LASER Specification Class 1 LASER Product
Wave length: 785 nm (CDs)/
660 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous
radiation is emitted with the safety
protection
Power supply
Reference
“.MKV”, “.mkv”
[For[the[United[Kingdom[and[Ireland]
[For[Australia[and[New[Zealand]
AC 220 V to 240 V, 50 Hz
[For[South[East[Asia]
AC 220 V to 240 V, 50 Hz/60 Hz
Power consumption Approx. 18 W
≥ With certain recording states and folder structures, the play
order may differ or playback may not be possible.
Reference
Power consumption Approx. 0.5 W
in standby mode
Power consumption [BDT460] Approx. 6 W
in quick start
[BDT360] Approx. 5.5 W
standby mode
Dimensions
(WkHkD)
Approx. 415 mmk43 mmk182 mm
Mass
Approx. 1.2 kg
≥ Specifications are subject to change without notice.
SQT0099
35
DMP-BDT460&360_EBGNGA-SQT0099.book 36 ページ
2014年1月28日 火曜日 午後3時57分
Audio information
Display languages list
The audio output differs depending on which
terminals are connected to the amplifier/receiver,
and the settings on the unit. (> 26, “Digital Audio
Output”)
≥ The number of channels listed is the maximum possible
number of output channels when connected to amplifier/
receiver compatible with the respective audio format.
Terminal
Output
channel
*1
*2
“Digital Audio Output”
“Bitstream”
“PCM”
HDMI AV Outputs using
OUT*2
original audio*1
BD-Video :
7.1ch PCM*1
DVD-Video :
5.1ch PCM
Dolby Digital/
OPTICAL DTS Digital
SurroundTM
Down-mixed 2ch
PCM
When “BD-Video Secondary Audio” is set to “On”, the
audio will be output as Dolby Digital, DTS Digital
SurroundTM or 5.1ch PCM.
When “DTS Neo:6” is set to “Cinema” or “Music”, 2ch
(2.1ch) audio can be expanded to 7ch (7.1ch) and output.
(> 27)
Supported format for DLNA
≥ File formats that are not supported by your
DLNA server cannot be played.
Video
Container
MKV
Xvid*
Video codec Audio codec
H.264
MPEG-4
Advanced
Simple Profile
(ASP)
AVCHD
MP4
H.264
PS
MPEG2
TS
MPEG2
H.264
AAC
DTS®
PCM
FLAC
Vorbis
Example of
file extension
.mkv
.avi
Dolby Digital
.mts
AAC
.mp4, .mov
Dolby Digital
.mpg, .mpeg
Linear PCM
AAC
.m2ts, .ts
Dolby Digital
Photo
Format
JPEG
Example of file extension
.jpg, .jpeg
Audio
Audio codec
MP3
FLAC
AAC
WMA
Linear PCM
Example of file extension
.mp3
.flac
.m4a, .aac
.wma
—
* Only when the file is transcoded by DLNA server.
36
SQT0099
Display Language Display Language Display Language
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
Portuguese
Russian
JPN
CHI
KOR
MAL
VIE
THA
POL
CES
SLK
HUN
FIN
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Polish
Czech
Slovak
Hungarian
Finnish
ARA
HIN
PER
IND
MRI
BUL
RUM
GRE
TUR
Arabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others
Language code list
Language
Code Language
Abkhazian:
6566
Afar:
6565
Afrikaans:
6570
Albanian:
8381
Amharic:
6577
Arabic:
6582
Armenian:
7289
Assamese:
6583
Aymara:
6589
Azerbaijani: 6590
Bashkir:
6665
Basque:
6985
Bengali; Bangla:
6678
Bhutani:
6890
Bihari:
6672
Breton:
6682
Bulgarian:
6671
Burmese:
7789
Byelorussian: 6669
Cambodian: 7577
Catalan:
6765
Chinese:
9072
Corsican:
6779
Croatian:
7282
Czech:
6783
Danish:
6865
Dutch:
7876
English:
6978
Esperanto:
6979
Estonian:
6984
Faroese:
7079
Fiji:
7074
Finnish:
7073
French:
7082
Frisian:
7089
Galician:
7176
Georgian:
7565
German:
6869
Greek:
6976
Greenlandic: 7576
Guarani:
7178
Code Language
Gujarati:
7185
Hausa:
7265
Hebrew:
7387
Hindi:
7273
Hungarian:
7285
Icelandic:
7383
Indonesian: 7378
Interlingua:
7365
Irish:
7165
Italian:
7384
Japanese:
7465
Javanese:
7487
Kannada:
7578
Kashmiri:
7583
Kazakh:
7575
Kirghiz:
7589
Korean:
7579
Kurdish:
7585
Laotian:
7679
Latin:
7665
Latvian, Lettish: 7686
Lingala:
7678
Lithuanian:
7684
Macedonian: 7775
Malagasy:
7771
Malay:
7783
Malayalam: 7776
Maltese:
7784
Maori:
7773
Marathi:
7782
Moldavian:
7779
Mongolian:
7778
Nauru:
7865
Nepali:
7869
Norwegian: 7879
Oriya:
7982
Pashto, Pushto: 8083
Persian:
7065
Polish:
8076
Portuguese: 8084
Punjabi:
8065
Quechua:
8185
Code
Rhaeto-Romance:
8277
Romanian:
8279
Russian:
8285
Samoan:
8377
Sanskrit:
8365
Scots Gaelic: 7168
Serbian:
8382
Serbo-Croatian: 8372
Shona:
8378
Sindhi:
8368
Singhalese: 8373
Slovak:
8375
Slovenian:
8376
Somali:
8379
Spanish:
6983
Sundanese: 8385
Swahili:
8387
Swedish:
8386
Tagalog:
8476
Tajik:
8471
Tamil:
8465
Tatar:
8484
Telugu:
8469
Thai:
8472
Tibetan:
6679
Tigrinya:
8473
Tonga:
8479
Turkish:
8482
Turkmen:
8475
Twi:
8487
Ukrainian:
8575
Urdu:
8582
Uzbek:
8590
Vietnamese: 8673
Volapük:
8679
Welsh:
6789
Wolof:
8779
Xhosa:
8872
Yiddish:
7473
Yoruba:
8979
Zulu:
9085
2014年1月28日 火曜日 午後3時57分
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/
Progressive” are trademarks of Panasonic Corporation and Sony
Corporation.
Java is a registered trademark of Oracle and/or its affiliates.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, &
DTS and the Symbol together are registered trademarks, and
DTS-HD Master Audio is a trademark of DTS, Inc. © DTS, Inc. All
Rights Reserved.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
This product is licensed under the AVC patent portfolio license and
VC-1 patent portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance with the AVC
Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii)
decode AVC/VC-1 Video that was encoded by a consumer
engaged in a personal and non-commercial activity and/or was
obtained from a video provider licensed to provide AVC/VC-1
Video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.
SDXC Logo is a trademark of SD-3C, LLC.
“DVD Logo” is a trademark of DVD Format/Logo Licensing
Corporation.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi
Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “Miracast”, “WPA”
and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks,
service marks, or certification marks of the Digital Living Network
Alliance.
Windows is a trademark or a registered trademark of Microsoft
Corporation in the United States and other countries.
Android is a trademark of Google Inc.
Copyright 2004-2013 Verance Corporation. CinaviaTM is a Verance
Corporation trademark. Protected by U.S. Patent 7,369,677 and
worldwide patents issued and pending under license from Verance
Corporation. All rights reserved.
This product incorporates the following software:
(1) the software developed independently by or for Panasonic
Corporation,
(2) the software owned by third party and licensed to Panasonic
Corporation,
(3) the software licensed under the GNU General Public License,
Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL V2.1), and/or
(5) open source software other than the software licensed under
the GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (5) are distributed in the hope
that it will be useful, but WITHOUT ANY WARRANTY, without
even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Please refer to the detailed
terms and conditions thereof shown in the Player Settings menu.
At least three (3) years from delivery of this product, Panasonic
will give to any third party who contacts us at the contact
information provided below, for a charge no more than our cost of
physically performing source code distribution, a complete
machine-readable copy of the corresponding source code covered
under GPL V2.0, LGPL V2.1 or the other licenses with the
obligation to do so, as well as the respective copyright notice
thereof.
Contact Information: oss-cd-request@gg.jp.panasonic.com
The source code and the copyright notice are also available for
free in our website below.
http://panasonic.net/avc/oss/bdplayer/AWBPM14A.html
David M. Gay’s dtoa and strtod license
The author of this software is David M. Gay.
Copyright (c) 1991, 2000, 2001 by Lucent Technologies.
Permission to use, copy, modify, and distribute this software for
any purpose without fee is hereby granted, provided that this
entire notice is included in all copies of any software which is or
includes a copy or modification of this software and in all copies of
the supporting documentation for such software.
THIS SOFTWARE IS BEING PROVIDED “AS IS”, WITHOUT ANY
EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR,
NEITHER THE AUTHOR NOR LUCENT MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND
CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE
OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
“UNICODE, INC. LICENSE AGREEMENT - DATA FILES AND
SOFTWARE
Unicode Data Files include all data files under the directories
http://www.unicode.org/Public/, http://www.unicode.org/reports/,
and http://www.unicode.org/cldr/data/.
Unicode Software includes any source code published in the
Unicode Standard or under the directories
http://www.unicode.org/Public/,
http://www.unicode.org/reports/, and
http://www.unicode.org/cldr/data/.
NOTICE TO USER: Carefully read the following legal agreement.
BY DOWNLOADING, INSTALLING, COPYING OR OTHERWISE
USING UNICODE INC.’S DATA FILES (““DATA FILES””), AND/OR
SOFTWARE (““SOFTWARE””), YOU UNEQUIVOCALLY
ACCEPT, AND AGREE TO BE BOUND BY, ALL OF THE TERMS
AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT
AGREE, DO NOT DOWNLOAD, INSTALL, COPY, DISTRIBUTE
OR USE THE DATA FILES OR SOFTWARE.
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1991-2009 Unicode, Inc. All rights reserved.
Distributed under the Terms of Use in
http://www.unicode.org/copyright.html.
Permission is hereby granted, free of charge, to any person
obtaining a copy of the Unicode data files and any associated
documentation (the ““Data Files””) or Unicode software and any
associated documentation (the ““Software””) to deal in the Data
Files or Software without restriction, including without limitation the
rights to use, copy, modify, merge, publish, distribute, and/or sell
copies of the Data Files or Software, and to permit persons to
whom the Data Files or Software are furnished to do so, provided
that (a) the above copyright notice(s) and this permission notice
appear with all copies of the Data Files or Software, (b) both the
above copyright notice(s) and this permission notice appear in
associated documentation, and (c) there is clear notice in each
modified Data File or in the Software as well as in the
documentation associated with the Data File(s) or Software that
the data or software has been modified.
SQT0099
37
Reference
DMP-BDT460&360_EBGNGA-SQT0099.book 37 ページ
DMP-BDT460&360_EBGNGA-SQT0099.book 38 ページ
2014年1月28日 火曜日 午後3時57分
THE DATA FILES AND SOFTWARE ARE PROVIDED ““AS IS””,
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO
EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS
INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR
ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES,
OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THE DATA FILES OR SOFTWARE.
Except as contained in this notice, the name of a copyright holder
shall not be used in advertising or otherwise to promote the sale,
use or other dealings in these Data Files or Software without prior
written authorization of the copyright holder.”
(1) MS/WMA
This product is protected by certain intellectual property rights of
Microsoft Corporation and third parties. Use or distribution of such
technology outside of this product is prohibited without a license
from Microsoft or an authorized Microsoft subsidiary and third
parties.
[For[the[United[Kingdom[and[Ireland]
(2) MS/PlayReady/Final Product Labeling
This product contains technology subject to certain intellectual
property rights of Microsoft. Use or distribution of this technology
outside of this product is prohibited without the appropriate
license(s) from Microsoft.
[For[the[United[Kingdom[and[Ireland]
(3) MS/PlayReady/End User Notices
Content owners use Microsoft PlayReady™ content access
technology to protect their intellectual property, including
copyrighted content. This device uses PlayReady technology to
access PlayReady-protected content and/or WMDRM-protected
content. If the device fails to properly enforce restrictions on
content usage, content owners may require Microsoft to revoke
the device’s ability to consume PlayReady-protected content.
Revocation should not affect unprotected content or content
protected by other content access technologies. Content owners
may require you to upgrade PlayReady to access their content. If
you decline an upgrade, you will not be able to access content that
requires the upgrade.
(4) FLAC, WPA Supplicant
The software licenses are displayed when “Software Licence” in
the Setup menu is selected. (> 30)
38
SQT0099
DMP-BDT460&360_EBGNGA-SQT0099.book 39 ページ
2014年1月28日 火曜日 午後3時57分
Limited Warranty (ONLY FOR AUSTRALIA)
Panasonic Warranty
1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its
Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of
Panasonic, the product is found to be faulty within the warranty period.
2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised
Distributors or Dealers and only where the products are used and serviced within Australia or it's territories. Warranty cover only
applies to service carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when
warranty service is requested.
3. This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as
noted in the operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers normal
domestic use only and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation,
accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm
activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including unauthorised alterations),
introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the
product, exposure to abnormally corrosive conditions or any foreign object or matter having entered the product.
4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase:
(a) Cabinet Part(s)
(e) DVD, Blu-ray or Recordable Discs
(b) Video or Audio Tapes
(f) Video / Audio Heads from wear and tear in normal use
(c) SD cards or USB devices
(g) Information stored on Hard Disk Drive, USB stick or SD card
(d) User replaceable Batteries
(h) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s)
etc
5. Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will not cover
(a) Internet and or DLNA connection / setup related problems
(b) Access fees and or charges incurred for internet connection
(c) The use of incompatible software or software not specifically stipulated in the product operations manual;
and
(d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the internet or
any other device.
6. To claim warranty service, when required, you should:
Telephone Panasonic’s Customer Care Centre on 132600 or visit our website referred to below and use the Service Centre
Locator for the name/address of the nearest Authorised Service Centre.
Send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of
purchase date. Please note that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged
by you.
Note that home or pick-up/delivery service is available for the following products in the major metropolitan areas of Australia or the
normal operating areas of the nearest Authorised Service Centres:
Plasma/LCD televisions / displays (screen size greater than 103 cm)
7. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or
re-installation of a product, including costs related to the mounting, de-mounting or remounting of any screen, (and any other
ancillary activities), delivery, handling, freighting, transportation or insurance of the product or any part thereof or replacement of and
do not extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or related to such installation,
de-installation, re-installation or transit.
Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however,
coverage will vary dependant on product. For advice on exact Authorised Service Centre locations for your product, please telephone
our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator.
In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the
Australian Consumer Law. If there is a major failure with the product, you can reject the product and elect to have a refund or to have
the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in value of the goods. You are
also entitled to have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a
major failure.
If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by
contacting the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair
or replace the product and will do so in a reasonable period of time from receiving notice from you.
THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)
SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
Reference
If you require assistance regarding warranty conditions or any other enquiries, please visit the Panasonic Australia
website www.panasonic.com.au or contact by phone on 132 600
If phoning in, please ensure you have your operating instructions available.
Panasonic Australia Pty. Limited
ACN 001 592 187 ABN 83 001 592 187
1 Innovation Road, Macquarie Park NSW 2113
PRO-031-F11 Issue: 4.0
01-01-2011
SQT0099
39
DMP-BDT460&360_EBGNGA-SQT0099.book 40 ページ
2014年1月28日 火曜日 午後3時57分
[For\the\United\Kingdom\and\Ireland\customers[
Sales and Support Information
Customer Communications Centre
≥ For customers within the UK: 0844 844 3899
≥ For customers within Ireland: 01 289 8333
≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays).
≥ For further support on your product, please visit our website:
www.panasonic.co.uk
Direct Sales at Panasonic UK
≥ Order accessory and consumable items for your product with ease and confidence by phoning our
Customer Communications Centre Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays).
≥ Or go on line through our Internet Accessory ordering application at www.pas-europe.com.
≥ Most major credit and debit cards accepted.
≥ All enquiries transactions and distribution facilities are provided directly by Panasonic UK.
≥ It couldn’t be simpler!
≥ Also available through our Internet is direct shopping for a wide range of finished products. Take a
browse on our website for further details.
(Inside of product)
(Back of product)
EU
Manufactured by:
Importer for Europe:
Panasonic Corporation
Kadoma, Osaka, Japan
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
Panasonic Corporation
Web Site: http://panasonic.net
C Panasonic Corporation 2014
p
SQT0099
F0214QK0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising