PROFESSIONAL SOUND SYSTEMS

Kinetic Active

Series

OPERATING MANUAL AND USER GUIDE

Kinetic 12A Kinetic 12MA Kinetic 15A

Kinetic 215A Kinetic 18BA www.wharfedalepro.com

OPERATING MANUAL AND USER GUIDE

IMPORTANT WARNINGS & SAFETY INSTRUCTIONS

1. Read these instructions

2. Follow all instructions

3. Keep these instructions

4. Heed all warnings

5. Do not use this apparatus near water

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarised or grounding plug. A polarised plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart and apparatus combination to avoid injury from tip-over.

13. Unplug the apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way including but not limited to power supply cord or plug damage, liquid ingress, foreign objects in the chassis, exposure to rain/moisture or impact damage. In addition the unit must be serviced when you experience any abnormal operation.

15. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not attempt to perform any servicing other than that contained in the operating instructions unless you are qualified to do so. In addition opening the casing will result in your warranty becoming null and void.

16. Do not install this apparatus in a confined space such as a book case or similar unit. Good ventilation should be maintained around the apparatus and any vents, air-inlets or fans should not be obstructed by objects such as paper, table-cloths, curtains etc.

17. WARNING: To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture. The apparatus should not be exposed to dripping or splashing and objects filled with liquids, such as vases, should not be placed on the apparatus.

18. WARNING: The mains plug/appliance coupler is used as a disconnect device, the disconnect device shall remain readily operable.

1

Kinetic Active Series

ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

19. - This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

- Warning: To reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.

- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

20. (Protective earthing terminal) The apparatus should be connected to a mains socket outlet with a protective earthing connection.

21. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use local return and collection systems or contact the retailer where the product was purchased.

They can take this product for safe environmentally friendly recycling.

TABLE OF CONTENTS

IMPORTANT WARNINGS & SAFETY INSTRUCTIONS ....................................................1

ABOUT THE Kinetic Active SERIES ..................................................................................3

INTRODUCTION ................................................................................................................3

Kinetic Active SERIES OVERVIEW ....................................................................................3

KEY FEATURES ................................................................................................................4

SETTING UP ......................................................................................................................5

SPEAKER PLACEMENT ....................................................................................................5

CONNECTIONS AND WIRING ..........................................................................................5

CONNECTING A PASSIVE MONITOR TO THE Kinetic 12MA ..........................................5

Kinetic 12MA PANEL & DESCRIPTION ............................................................................6

Kinetic 12A/15A/12MA/215A ..............................................................................................7

Kinetic 12A/15A-REAR PANEL LAYOUT ...........................................................................7

Kinetic 215A-REAR PANEL LAYOUT .................................................................................8

Kinetic 12A/15A/215A REAR PANEL FEATURES .............................................................9

Kinetic 18BA REAR PANEL FEATURES ..........................................................................10

Kinetic 12A/15A/215A BASIC SYSTEM ...........................................................................11

STEREO SYSTEM WITH Kinetic MID/HIGH SYSTEM WITH Kinetic 18BA ...................12

Kinetic 12MA WITH CONNECTIONS ...............................................................................13

REFERANCE ...................................................................................................................14

SPECIFICATIONS ...........................................................................................................16

DIMENSIONAL DRAWINGS ............................................................................................18

BLOCK DIAGRAM............................................................................................................21

2

OPERATING MANUAL AND USER GUIDE

ABOUT THE Kinetic Active SERIES

Wharfedale Kinetic Active series sound reinforcement speakers are designed for demanding sound reinforcement applications.

The Kinetic Active series loudspeakers are high quality, active speaker systems designed to provide the best sound in a powerful, feature laden, easy to use package. They provide transparent and accurate sound reproduction or reinforcement. The 30.5mm exit phenolic high frequency compression driver projects crystal clear high frequencies. A proprietary 90°x60°Elliptical Wave

Guide(EWG) delivers the high frequencies in a well defined, even coverage pattern. Dynamic passages, such as the crack of a snare drum or the report of a cannon, come through just like the real thing.

The Kinetic Active Series is very flexible in application. With its heavy duty components, handles and stand mount socket and durable carpet finish, the Kinetic Active can rise to any sound reinforcement challenge.

INTRODUCTION

Wharfedale Kinetic Active Series loudspeakers are the result of many years of experience in the use, design and manufacturing of professional loudspeaker products. We take great pride in engineering and building every Wharfedale Pro loudspeaker and wish to thank you for entrusting us with your sound.

From the time Gilbert Briggs built his first loudspeaker in 1932, to the present, Wharfedale

Loudspeakers have maintained the same standard of quality in components, workmanship and performance. Actually, Wharfedale is one of a few present day manufacturers that design, engineer and build all of their own transducers.

Please take a few minutes to read this manual completely in order to ensure that you get the most out of your Kinetic Active Series Loudspeaker.

Kinetic Active SERIES OVERVIEW

The Kinetic Active Series are powerful, accurate, high quality loudspeaker systems with low distortion that were designed to deliver high quality sound for the best value. From the Kinetic 12MA to the Kinetic 15A plus the Kinetic 18BA high powered sub, you have what it takes to assemble the system that your music deserves.

An important factor in loudspeakers is the smoothness of the sound coverage. Many speakers that may sound acceptable in the horizontal plane have problems in the vertical plane. The Kinetic

Active speakers exhibit very smooth and well-behaved sound dispersion characteristics in both the horizontal and vertical planes making positioning and set-up less critical. Everyone in the room will hear the same quality sound.

3

Kinetic Active Series

KEY FEATURES

♦ 2-way bi-amplified(Kinetic 12A/15A/215A)

♦ Class D LF and HF power amplifiers(Kinetic 12A/15A)

♦ Class D LF and Class AB HF power amplifiers(Kinetic 215A)

♦ LF and HF signal limiting

♦ 1.2 inch (30.5mm) phenolic diaphragm compression driver

♦ 90

O x60

O

High Frequency Elliptical Wave Guide (EWG)

♦ High power 2.5" voice coil subwoofer

♦ Thermal, DC and short circuit fault protection

♦ Bass/Treble EQ controls

♦ 7 Band Graphic Equalizer(Kinetic 12MA)

♦ External speaker output connector(Kinetic 12MA)

♦ Built in 2 channel TRS jack and male XLR balanced line lever or MIC level inputs

♦ Female XLR balanced line level output

♦ Rear panel LED

♦ Volume control

♦ Tear drop shaped handles

♦ Integrated stand adapter (Kinetic 12A/15A/18BA)

♦ Covered in rugged black carpet

4

OPERATING MANUAL AND USER GUIDE

SETTING UP

1. Be sure that the POWER switches on the Kinetic Active speakers are in the OFF position

2. Set the level controls to minimum(Fully anticlockwise).

3. Set the EQ HF and LF controls to 0dB position.

4. Set MIC/LINE switch to the LINE position(disengaged).

5. Connect all signal cables.

6. Plug the power cable into a properly grounded 3-wire AC power.

7. Switch on source equipment, ensuring that the master level is at minimum.

8. Switch on the Kinetic Active Loudspeaker.

9. Raise the level control on the Kinetic Active .

10. If the limit LED illuminates lower the level control, if more level is required you will need more speakers. Occasional flashes are acceptable.

11. When powering down your system ensure that the level control has been lowered to minimum before switching off the power.

SPEAKER PLACEMENT

The uniform dispersion of the Kinetic Active Series makes it easy to position the speakers where you need them, rather than trying to rearrange the room to accommodate the sound system. And the trapezoidal shaped cabinet with heavy duty handles makes transporting the speakers that much easier. An integral Aluminium stand socket(Kinetic 18BA) allows you to place the speakers high above the audience for best sound coverage..

When you don’t think you are getting all the bass you need, the Kinetic Active Series has a great sub: the Kinetic 18BA. This is a powerful bass reflex subwoofer that gives you the lowest frequencies and the punch you need. The Kinetic 18BA is a straight forward, no nonsense 18-inch bass reflex subwoofer with exceptional low frequency response.

CONNECTIONS AND WIRING

Connecting the Kinetic Active Series to your system is easy. The input panel includes parallel

TRS 6.35mm(1/4”) and XLR connectors. Run your signal wires from your mixer or other line level components, to the speaker; you can use either input connector. Be sure to run the audio cables separately from the power cables.

In addition to microphones, your Kinetic Active system will accommodate many sources. Some of these sources may require special adapters or adapter cables. See the “Connectors” section for more information.

CONNECTING A PASSIVE MONITOR TO THE Kinetic 12MA

When additional coverage or power is needed an extra passive monitor(For example the Kinetic

12M) can be powered in parallel from the internal amplifier of the Kinetic 12MA.

A standard speaker cable is used to connect the Kinetic 12MA output to the input of the additional monitor.

5

Kinetic Active Series

Kinetic 18BA REAR PANEL FEATURES

1. HEAT SINK

2. VOLUME CONTROL

3. INPUT A

4. INPUT B

5. OUTPUT B

6. OUTPUT A

7. POWER SOCKET

8. LIMIT LED

POWER LED

9. POWER SWITCH

10. PHASE SWITCH

11. CROSSOVER

FREQUENCY

CONTROL

Cooling fins for amplifier. Do not obstruct.

Adjusts the volume.

TRS Jack and male XLR balanced for INPUT A

TRS Jack and male XLR balanced for INPUT B

Balanced male XLR connector provides output HIGH PASS signal.

Selects the signal type that is routed to the OUTPUT jacks, “THRU” sends the unprocessed signal to the outputs. “HIGH PASS” filters the signal at 100Hz to the outputs.

Balanced male XLR connector provides output HIGH PASS signal.

Selects the signal type that is routed to the OUTPUT jacks, “THRU” sends the unprocessed signal to the outputs. “HIGH PASS” filters the signal at 100Hz to the outputs.

This is the connection for the IEC AC power connector.

LED indicator illuminates when the signal limiting function is activated.

LED indicator illuminates when the unit is powered up.

Turns the power on and off to the subwoofer amplifier module.

Selects the polarity of the signal being sent to the subwoofer.

0 o

selects the signal polarity as it appears at the input.

The 180 o

selection inverts the polarity of the signal.

Adjustable 80Hz to 200Hz.

10

Kinetic Active Series

STEREO SYSTEM WITH Kinetic MID/HIGH SYSTEM WITH Kinetic 18BA

This is a system in which a pair of Kinetic 18BA are used with a pair of Kinetic12A(15A) speakers.

12

Kinetic Active Series

SPECIFICATIONS

Model Name

System Type

Frequency Response (+/-3dB)

Low Frequency Transducer

Size (mm / inches)

Coil Size (mm / inches)

Impedance

High Frequency Transducer

Kinetic 12A

Active 12”2-way Bi-

Amplified system

60-20kHz

305mm / 12”

50.8m / 2.0”

4 Ω

Type

Coil Size (mm / inches)

Exit Size (mm / inches)

Diaphragm Material

Impedance

Compression Driver

25.4mm / 1”

30.5mm / 1.2”

Phenolic

8 Ω

90° x 60° High Frequency Coverage (H x V)

Amplifiers

Low-Frequency Power Amplifier

RMS (Class D)

Low-Frequency Power Amplifier

220W

350W

Peak (Class D)

High- Frequency Power Amplifier

RMS (Class D)

70W

Kinetic 12MA

Active 12” Amplified monitor system

60-20kHz

305mm / 12”

50.8m / 2.0”

8 Ω

Compression Driver

25.4mm / 1”

30.5mm / 1.2”

Phenolic

8 Ω

90° x 60°

400W 4ohms, 200W

8ohms (Full range)

700W 4ohms, 400W

8ohms (full range)

High- Frequency Power Amplifier

Peak (Class D)

140W

Electronic Crossover:

Crossover Frequency

Controls

Equalization:

HI PASS 2.7KHz

LOW PASS 2.7KHz

+/-12dB maximum

Treble 12KHz shelving,

Bass 100Hz shelving

Amplifier Protection

Power On Protection

Thermal Protection passive crossover point 2.8KHz

7 Bands EQ (60Hz,

120Hz, 480Hz, 1KHz,

4KHz, 8KHz, 16KHz)

+/-12dB

Power switch on / off mute

Power switch on / off mute

Amplifier shutdown, Amplifier shutdown, auto reset auto reset

Low Line Voltage Shut Down

Driver Protection

DC Protection

Short Protection

85% Nominal line voltage

YES

YES

YES

85% Nominal line voltage

YES

YES

YES

Clip Limiter:

Limiter Indicator

Power Indicator

RED LED

GREEN LED

RED LED

GREEN LED

Inputs

Input A – type

Input Sensitivity

Maximum Input Level

Input Connector

Balanced

0dBu for Line in,

-40dBu for MIC in

20dBu

Balanced

0dBu for Line in,

-40dBu for MIC in

20dBu

Input Impedance

TRS JACK AND

MALE XLR

22KΩ BALANCE

AND 11KΩ

UNBALANCE

TRS JACK AND

MALE XLR

22KΩ BALANCE

AND 11KΩ

UNBALANCE

Kinetic 15A

Active 15” 2-way Bi-

Amplified system

50-20kHz

381mm / 15”

50.8m / 2.0”

4 Ω

Compression Driver

25.4mm / 1”

30.5mm / 1.2”

Phenolic

8 Ω

90° x 60°

220W

350W

70W

140W

HI PASS 2.7KHz

LOW PASS 2.7KHz

+/-12dB maximum

Treble 12KHz shelving,

Bass 100Hz shelving

Power switch on / off mute

Amplifier shutdown, auto reset

85% Nominal line voltage

YES

YES

YES

RED LED

GREEN LED

Balanced

0dBu for Line in,

-40dBu for MIC in

20dBu

TRS JACK AND

MALE XLR

22KΩ BALANCE

AND 11KΩ

UNBALANCE

Kinetic 215A

Active 2X15” 2-way

Bi-Amplified system

45-20kHz

381mm / 15”

50.8m / 2.0”

4 Ω

Compression Driver

25.4mm / 1”

30.5mm / 1.2”

Phenolic

8 Ω

90° x 60°

400W

700W

70W (class AB)

140W (class AB)

HI PASS 2.7KHz

LOW PASS 2.7KHz

+/-12dB maximum

Treble 12KHz shelving,

Bass 100Hz shelving

Power switch on / off mute

Amplifier shutdown, auto reset

85% Nominal line voltage

YES

YES

YES

RED LED

GREEN LED

Balanced

0dBu for Line in,

-40dBu for MIC in

20dBu

TRS JACK AND

MALE XLR

22KΩ BALANCE

AND 11KΩ

UNBALANCE

Kinetic 18BA

Active 18” SUBWOOFER

Amplified system

45-200Hz

470mm / 18”

64.26mm / 2.5”

8 Ω

300W

600W

Low Pass 200Hz

Adjustable 80Hz to

200Hz

Power switch on / off mute

Amplifier shutdown, auto reset

85% Nominal line voltage

YES

YES

YES

RED LED

GREEN LED

Balanced

0dBu for Line in,

20dBu

TRS JACK AND MALE

XLR

22KΩ BALANCE AND

11KΩ UNBALANCE

16

OPERATING MANUAL AND USER GUIDE

SPECIFICATIONS

Model Name

Input B – type

Input Sensitivity

Maximum Input Level

Input Connectors

Line Output

Line Output Connector

Impedance Balanced:

Loop Gain

AC Power details

Power Supply

AC Power Options

Kinetic 12A

Balanced

0dBu

20dBu

TRS JACK AND

MALE XLR

Balanced

FEMALE XLR

100R

0dB

SMPS

AC100V-120V~

/220V-240V~,

50/60Hz

Green LED

Power On Indicator

Enclosure

Enclosure Material

Colour

Weight

Net Weight (kg / lbs)

Gross Weight (kg / lbs)

Dimensions (Unpacked)

H (mm / inch)

Particle

BLACK CARPET

13.26kg / 29.2lbs

15.56kg / 34.2lbs

525mm/20.7"

W FRONT/REAR(mm / inch)

D (mm / inch)

Dimensions (Packed)

H (mm / inch)

W FRONT/REAR(mm / inch)

D (mm / inch)

CBM

362.2/210.1mm

/14.3"/8.27"

308mm/12.13"

586mm/23.07"

426/242mm/

16.8"/9.53"

348mm/13.7"

0.068

Kinetic 12MA

Balanced

0dBu

20dBu

TRS JACK AND

MALE XLR

Balanced

FEMALE XLR

100R

0dB

SMPS

AC100V-120V~

/220V-240V~,

50/60Hz

Green LED

Particle

BLACK CARPET

13.68kg / 30.1lbs

16.08kg / 35.4lbs

380(SITU)mm

/14.96"

366/14.4"

525mm/20.7"

413mm/16.26"

568mm/22.36"

386mm/15.2"

0.09

Kinetic 15A

Balanced

0dBu

20dBu

TRS JACK AND

MALE XLR

Balanced

FEMALE XLR

100R

0dB

SMPS

AC100V-120V~

/220V-240V~,

50/60Hz

Green LED

Particle

BLACK CARPET

18.7kg /41.14lbs

21.18kg / 46.6lbs

618mm/24.3"

437.4/273.5mm

/17.2"/10.77"

330mm/12.99"

680mm/26.77"

502/304mm/

19.76"/11.97"

370mm/14.57"

0.10

Kinetic 215A

Balanced

0dBu

20dBu

TRS JACK AND

MALE XLR

Balanced

FEMALE XLR

100R

0dB

SMPS

AC100V-120V~

/220V-240V~,

50/60Hz

Green LED

Particle

BLACK CARPET

29.42kg /64.7lbs

33.2kg/73.04lbs

1004mm/39.53"

437.4/273.5mm

/17.22"/10.78"

330mm/12.99"

1172mm/46.14"

538/324mm

/21.18"/12.76"

400mm/15.75"

0.20

Kinetic 18BA

Balanced

0dBu

20dBu

TRS JACK AND MALE

XLR

Balanced

FEMALE XLR

100R

0dB

SMPS

AC100V-120V~

/220V-240V~,

50/60Hz

Green LED

Particle

BLACK CARPET

31.6kg /69.52lbs

34.42kg /75.7lbs

512mm/20.16"

640mm/25.19"

437mm/17.2"

579mm/22.79"

686mm/27.0"

483mm/19.0"

0.192

17

DIMENSIONAL DRAWINGS

Kinetic Active Series

Kinetic 18BA

20

WHARFEDALE PRO LIMITED WARRANTY

Wharfedale Pro products are warranted of manufacturing or material defects for a period of one year from the original date of purchase. In the event of malfunction, contact your authorized Wharfedale Pro dealer or distributor for information.

* Be aware that warranty details may differ from country to country. Contact your dealers or distributor for information. These terms do not infringe your statutory rights.

www.maxlight.ru

Wharfedale Professional

IAG House, 13/14 Glebe Road, Huntingdon, Cambridgeshire, PE29 7DL, UK www.wharfedalepro.com

Wharfedale Professional reserves the right to alter or improve specifications without notice.

All rights reserved © 2013 Wharfedale Pro. Wharfedale Pro is a member of the IAG Group.