Magma ExpressBox 3T-V3

Magma ExpressBox 3T-V3
Step 2: Remove Top Cover
Step 6: Turn on Computer
Loosen thumbscrew and remove top cover.
ExpressBox 3T-V3 will automatically turn ON when the computer is turned ON.
A BLUE light will shine when the expansion chassis is ON.
Magma ExpressBox 3T-V3
ExpressBox 3T-V3 will automatically turn OFF when the computer is turned OFF
or goes into SLEEP mode.
Thunderbolt™ 3 to PCIe® Expansion
If either end of the Thunderbolt 3 cable is removed while the system is ON, the
expansion chassis will automatically power down.
Quick Start Guide
Step 3: Install PCIe Cards and or Blower
Step 1: Unpack the ExpressBox 3T-V3
The box contains the following items:
•
•
•
•
•
Magma ExpressBox 3T-V3
Fan Blower
US Power Cord
Carry Bag
Quick Start Guide
Note:
If your PCIe card runs hot or requires more than 20
Watts of power, we recommend use of the provided
Fan Blower in the x4 PCIe slot. Use caution if using all
three PCIe slots. Check for heat with only two cards first.
Note:
Step 4: Connect Power
Attach the power cord to the back of the Magma product and plug into a
power source.
Magma ExpressBox 3T-V3 does not have ON/OFF switch. The BLUE LED
on the front is an INDICATOR, not a power switch. To turn ON the expansion chassis, simply connect to a Thunderbolt 3 equipped computer.
Fan Speed and Noise Adjustment
Step 5: Connect to Computer
For low power or self-cooled cards you can reduce the
fan noise by moving the jumper found under the removable cooling fan at the front of the chassis to the slowest
speed setting. If the chassis gets hot during use, you
should increase the fan speed to provide more cooling.
Connect a Thunderbolt 3 cable to one of the ports on the back of the
Magma product to the Thunderbolt 3 port on your computer. You can use
the second Thunderbolt 3 port to connect to another
Thunderbolt 3 device or a mini DisplayPort device.
The Factory Default is setting 2 (medium). The slowest
speed is setting 4 and the fastest speed is setting F.
Need More Help?
Note:
Download the User Manual at www.magma.com
One Stop Systems Support: www.onestopsystems.com/support-and-warranty-information
Call Us: 1-800-285-8990 or 1-858-530-2511
Magma ExpressBox 3T-V3 requires a Thunderbolt 3 cable (sold separately)
FCC Statement
Electrostatic Discharge (ESD) Warning
WARNING
Electrostatic Discharge (ESD) is the enemy of semiconductor devices. You should
always take precautions to eliminate any electrostatic charge from your body and
clothing before touching any semiconductor device or card by using an
electrostatic wrist strap and/or rubber mat.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or
modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
Industry Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe A est conformé à la norme NMB-003 du Canada
CE
The product(s) described in this manual complies with all applicable European Union (CE) directives. One Stop Systems will not retest or
recertify systems or components that have been reconfigured by customers.
© 2017 Magma is a trademark of One Stop Systems, Inc. Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation in the U.S. and/or other countries.
09-09989-00-C
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising