MultiLog SRD-99
Datasheet
MultiLog SRD-99
data recorder
up to 8 inputs 0/4 - 20 mA or Pt100/Pt500/Pt1000
2 electronic relay outputs (optoMOS)
USB Host port for flash data storage
RS-485 / Modbus RTU
free configuration and recording software
The MultiLog SRD-99 device is designed to record and
display current values as well as to present technological
parameters in the form of graphs. The device is equipped
with eight temperature (Pt100/500/1000) or current (in the
0/4-20 mA standard) inputs, one pulse (digital) input for
controlling the recording process and one USB Host port
for flash data storage. Internal memory has 2 MB capacity
(0.5 million data recordings altogether) or 8 MB in version
with USB port (2 milions data recordings). However
when a USB flash drive is plugged permanently, it can
significantly extend the recording time without a need of
data transfering from SRD-99 to a PC. For example: 1GB
flash drive allows continuous data recording for over 1 year
(8 channels recorded every 1 sec., approx 250 millions data
recordings)! Individual alphanumeric description (text) of
each of the recorded channels is possible. The multilanguage menu assisted with full text descriptions makes
the unit configuration process quite easy. However, due to a
significant number of configured parameters it is advised to
use the attached configuration software for PCs.
New in SRD-99 are 2 outputs - electronic relays with max.
load 24V AC (35V DC) 200 mA. Main function of outputs is
a signalisation of critical situations, but thanks to expanded
menu it is possible to use it in numerous control and
regulation applications. Both outputs can be driven by
single measurement channel or by group of channels (from
1 to 8 channels) with individually adjustable thresholds for
every measurement channel. Signalisation of output state is
made as two fields described R1 and R2 in left upper corner
of LCD screen.
- USB Host port for flash data storage and configuration
transfer (option),
- a legible graphic display 128x64 points, with a backlight,
- current graph of trends for each channel separately,
- free configuration and recording software,
- insulated communication interface RS-485.
Ordering
SRD-99-XX28-1-X-XX1
number
of inputs:
1
4
8
type of
inputs:
1 : current 0/4-20 mA
3 : RTD (Pt100,
Pt500, Pt1000)
Amplicon.com
options:
00 : no options
01 : IP 65 frame
(version without USB)
0B : USB Host port provided
with a protective cap
0J : portable case P130
(front USB Host,
no alarm connectors)
power supply:
3 : 24V AC/DC
4 : 85V - 260V AC/DC
An example of what the display looks like
The history of the process in time
The current value of the measurement signal
Height of the digits: 18 mm
8-channel view displayed at the same time
Device information
Logging parameters
Main menu of the unit
Technical data
Power supply: 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC, all separated
Power consumption: typical 7 VA; max. 12 VA
Display: graphic LCD, 128 x 64 points, with backlight
Measuring inputs: 1, 4 or 8; Pt100; Pt500; Pt1000 (2 and 3-conductor connection)
or 0/4-20 mA inputs; common ground
Measuring range: ± 9999 + decimal point (current inputs); -100°C ÷ +600°C (RTD
inputs) with resolution 0,1°C
Digital input: 1 input 24V DC, optocoupled
Outputs: 2 electronic relays (ER1, ER2) with max. load 24V AC (35V DC) / 200 mA
Sensors supply (only current version): 24 V DC ± 5%, max. 200 mA, not separated
from measuring inputs
Communication interface: RS-485 (Modbus RTU) or USB Host port, galvanically
separated
Transmission speed: 1200 - 115200 bit/sec.
Internal memory capacity: 2 MB (0.5 million data recordings) in version without USB,
8 MB (above 2 millions data recordings) in version with USB Host port
Type of protection:
version without USB: IP 65 (front), available options: additional frame IP 65
for panel cut-out sealing, transparent door STD-99, see: accessories
version with USB: a) IP 40, b) IP 54 (when fitted with STD-99 transparent
door, see: accessories)
Working temperature: 0°C ÷ +50°C
Storage temperature: -10°C ÷ +70°C
Case: board
Case material: NORYL - GFN2S E1
Case dimensions: 96 x 96 x 100 mm
Panel cut-out dimensions: 90,5 x 90,5 mm
Installation depth: min. 102 mm
Board thickness: max. 5 mm
IT and Instrumentation for industry
Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com
Datasheet
Extended network applications
1. Loggy Soft
We have extended our offer by ethernet applications and just there is no need to place
PC with RS-485/USB converter near the installation. Now it can be installed on any
location where internet is available. Additionally, we have expanded network
functionality of SimCorder application. Now, it allows to upgrade your acquisition
system of network functions based on TCP/IP protocol. This version consists of server,
which collects measurement data from network and records them to database and
clients which communicate to the server and allow watching stored data.
SimCorder
Software attached with data recorder
router
2. S-Toolkit
Server
converter
Serial/Internet
SimCorder
The Loggy Soft program enables the visualization,
archiving and printing of measurements (e.g. temperature,
humidity, pressure) stored in SRD-99-type device memory.
Work with SRD-99-type devices takes place through
an RS-485 serial interface or flash-disk devices plugged
into USB port. Connecting a network of units to a serial
port (RS-232) or USB port of a PC is possible thanks
to a converter (RS-485 to RS-232 or RS-485 to USB)
produced by SIMEX.
Client
Examplary pin assignment
1
2
L
N
4
5
6
7
9 10 11 12 13 14
n.c.
DIN- DIN+
85-260V
AC
50/60Hz
12VA
ER1
ER2
digital
input
DATA+
DATAGND-RS
RS-485
Warning!
Terminals GND and AGND are not separated.
GND
1
2
L
N
85-260V
AC
50/60Hz
12VA
6
7
9 10 11 12 13 14
n.c.
DIN- DIN+
ER1
ER2
DATA+
DATAGND-RS
digital
input
RS-485
15 16 17 18 19 20 21 22 23 24 25 26
connecting terminals (closed)
15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 33 34 35 36 37 38
GND
+24V +24V
AIN2
AIN4
AIN6
AIN8
AIN1
AIN3
AIN5
AIN7
AGND
current inputs
version with current inputs
The S-Toolkit software enables configuration reading and
writing operations, updating the device firmware and
obtaining basic information on SRD-99-type devices
through RS-485 serial interface or flash-disk devices
plugged into USB port. This application enables to quickly
and easily define device parameters in one of three possible
configuration models. The set of parameters can be
transmitted directly to the device or stored in a file for
future use.
5
4
AIN5
AIN6
AIN7
AIN8
27 28 29 30 31 32 33 34 35 36 37 38
AIN1
AIN2
AIN3
AIN4
AIN1 - AIN8: Pt100/500/1000 inputs
version with Pt inputs
Accessories
Portable case P130
(front USB Host,
no alarm connectors)
Converters:
SRS-U/4-Z45
converter USB/RS-485
Content of package
SRS-2/4-Z45
converter RS-232/RS-485
100 mm
98 mm
- data recorder SRD-99,
- assembly brackets - 2 pieces,
- user’s manual for SRD-99 unit and for softwares: Loggy
Soft and S-Toolkit,
- CD-ROM with the aforesaid manuals in PDF format and
installations of Loggy Soft and S-Toolkit software
(available optional with extra charge).
STD-99
Transparent door with moulded frame acc. to DIN 43700,
lockable with security key.
Door and frame are made by injection moulding thus
assuring an exact fit, an optimal choice of a material
which is very strong and with no risk of corrosion; perfect
seal-protective system IP 54 acc. to DIN 40050 provided
by all-round soft rubber sealing the moulding; due to the
special door mountings, the door does not swing in or out
sideways on opening; door-frame and front-frame can be
exchanged. The ready-assembles units cannot be
opened by unauthorised persons without using force or
special equipment.
R
X
SIME
Mini USB stick
R
SIMEX
Hasło opcji zaawansowanych Loggy Soft: srd system
I
SRD Toolkit
v.1.4.4
Loggy Soft
v.1.0.10
Oprogramowanie do konfiguracji, wizualizacji
i drukowania wyników pomiarów rejestratora
SRD-99
Wszelkie prawa zastrzeżone
Gdańsk, styczeń 2007
The mini USB memory stick is incredibly small
and stylish flash drive offering up to 8GB data
storage. Measuring merely 31,3 x 12,4 mm, the
mini USB drive is ideal for transporting data and
fits inside optional lockable door STD-99.
2, 4 and 8 GB memory sticks available.
31,3 mm
2.1.2.
Amplicon.com
IT and Instrumentation for industry
Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising