Industrial Wireless IEEE 802.11 Solutions

Industrial Wireless IEEE 802.11 Solutions
Product Selection Guide
Industrial Wireless AP/Bridge/Client Solutions�� 6-2
Introduction
Introduction to Industrial IEEE 802.11 Wireless�� 6-3
Dual-RF Wireless AP/Bridge/Client
AWK-6232 Series: Industrial IEEE 802.11a/b/g/n IP68 dual-RF wireless AP/bridge/client �� 6-7
AWK-5232 Series: Industrial IEEE 802.11a/b/g/n dual-RF wireless AP/bridge/client�� 6-9
AWK-6222 Series: Industrial IEEE 802.11a/b/g IP68 dual-RF wireless AP/bridge/client��6-11
AWK-5222 Series: Industrial IEEE 802.11a/b/g dual-RF wireless AP/bridge/client ��6-13
Single-RF Wireless AP/Bridge/Client
AWK-4131 Series: Industrial IEEE 802.11a/b/g/n IP68 wireless AP/bridge/client��6-15
AWK-3131 Series: Industrial IEEE 802.11a/b/g/n wireless AP/bridge/client��6-17
AWK-4121 Series: Industrial IEEE 802.11a/b/g IP68 wireless AP/bridge/client��6-19
AWK-3121 Series: Industrial IEEE 802.11a/b/g wireless AP/bridge/client��6-21
Single-RF Wireless Client
AWK-1121/1127 Series: Industrial IEEE 802.11a/b/g wireless client��6-24
Wireless Access Controller
WAC-1001: Industrial wireless access controller��6-27
Wireless Antennas and Accessories
Overview�� 6-29
Wireless Antenna Selection Guide�� 6-30
Wireless Accessories Selection Guide�� 6-31
6
Industrial
Wireless IEEE
802.11 Solutions
Industrial Wireless IEEE 802.11 Solutions
Industrial Wireless AP/Bridge/Client Solutions
Dual-RF Wireless AP/Bridge/Client
AWK-6232
AWK-5232
Single-RF Wireless AP/Bridge/Client
AWK-6222
AWK-5222
AWK-4131
AWK-3131
Single-RF Wireless Client
AWK-4121
AWK-3121
AWK-1127
AWK-1121
WLAN
6
IEEE802.11
Standards
Number of RF
modules
a/b/g/n
a/b/g
a/b/g/n
a/b/g
Industrial Wireless IEEE 802.11 Solutions > Product Selection Guide
2
2
2
2
1
1
1
1
1
1
4
4
4
4
2
2
2
2
2
2
N-type (female)
AWK-3121/3121SSC: RP-SMA
(female)
RP-SMA (female) RP-SMA (female)
AWK-3121-M12:
QMA (female)
1
1
Interfaces
Number of
Antenna
Connectors
Antenna
Connector Type*
N-type (female)
Total Number of
LAN Ports
2
AWK-5232:
RP-SMA (female)
AWK-5232-M12:
QMA (female)
2
N-type (female)
2
AWK-5232: RJ45
LAN Port Type
LAN Port Speed
RS-232 Console
Port
DB9
RS-232/422/485
Serial Port
DI/DO
DI/DO Connector
Type
M12
10/100/
1000BaseT(X)
AWK-5232-M12:
M12
10/100/
1000BaseT(X)
AWK-5222:
RP-SMA (female)
AWK-5222-M12:
QMA (female)
2
1
AWK-5222: RJ45
RJ45
10/100BaseT(X)
N-type (female)
AWK-5222-M12:
M12
10/100BaseT(X)
M12/ SFP
(Combo)
AWK-3131:
RP-SMA (female)
AWK-3131-M12:
QMA (female)
1
AWK-3131:
RJ45/ SFP
(Combo)
1
1
RJ45
RJ45
10/100BaseT(X)
10/100BaseT(X)
1, RJ45
1, RJ45
1, RJ45
-
1
-
AWK-3121: RJ45
RJ45
AWK-3131-M12:
M12
AWK-3121-SSC:
SC
AWK-3121-M12:
M12
AWK-3131:
10/100/
1000BaseT(X) or
10/100/
1000BaseT(X) or 1000BaseSFP
10/100BaseT(X)
1000BaseSFP
AWK-3131-M12:
10/100/
1000BaseT(X)
1, waterproof
1, RJ45
1, waterproof RJ45
RJ45
AWK-3121:
10/100BaseT(X)
AWK-3121-SSC:
100BaseFX
AWK-3121-M12:
10/100BaseT(X)
1, waterproof
RJ45
1, RJ45
1, waterproof
RJ45
1, RJ45
-
-
-
-

8-pin M12
(A-coding, male)

10-pin terminal
block


8-pin M12
10-pin terminal
(A-coding, female) block


8-pin M12
10-pin terminal
(A-coding, male) block


8-pin M12
10-pin terminal
(A-coding, female) block
-
-
-
-
IP68
IP30
IP68
IP30
IP68
IP30
IP68
IP30
IP30
IP30
 (optional)

 (optional)

 (optional)

 (optional)




 (optional)
 (optional)
-

 (optional)
 (optional)
-

 (optional)
 (optional)
-

 (optional)
 (optional)
-
 (optional)
-
 (optional)
-















12 to 48 VDC
5-pin M12
(A-coding)
 (PoE+ only)
10-pin terminal
block
 (PoE+ only)
5-pin M12
(A-coding)

10-pin terminal
block

5-pin M12
(A-coding)

10-pin terminal
block

5-pin M12
(A-coding)

10-pin terminal
block

4-pin terminal
block
*
4-pin terminal
block
*










-
-
-
UL/cUL CI D2,
ATEX Zone 2
(Pending)
UL/cUL CI D2,
ATEX Zone 2
(Pending)
-
-
-
-
-
Housing Protection
IP-rating
Installation Options
DIN-Rail
Mounting
Wall Mounting
Pole Mounting
Supported Operating Temperatures
-25 to 60°C
0 to 60°C
-40 to 75°C

Power Requirements
Input Voltage
Connector
PoE Support
Reverse Polarity
Protection
Standards and Certifications
Safety
UL 60950-1, EN 60950-1
UL/cUL CI D2,
ATEX Zone 2
(Pending)
EN 301 489-1/17, EN 301 489-1/17, EN 301 489-1/17,
FCC Part 15
FCC Part 15
FCC Part 15
EMC
Subpart B,
Subpart B,
Subpart B,
EN55022/55024 EN55022/55024 EN55022/55024
IEC 61000-6-2/4
EN 300 328,
Radio
EN 301 893,
DSPR (Japan)
EN 50155 (Environmental),
Rail Traffic
EN 50121-1/4 (Environmental)
* For PoE models only
Hazardous
Location
6-2
-
-
w w w. m o x a . c o m
EN 301 489-1/17,
FCC Part 15
EN 301 489-1/17,
Subpart B,
FCC Part 15 Subpart B,
EN55022/55024 EN55022/55024
IEC 61000-6-2/4
EN 300 328,
EN 300 328,
EN 301 893,
EN 301 893
DSPR (Japan)
EN 300 328,
EN 301 893,
DSPR (Japan)
-
info@moxa.com
-
Industrial Wireless
Introduction to
Industrial IEEE 802.11 Wireless
Industry has already accepted wireless networking as an excellent
solution for many different applications. The main advantages are the
convenience of connecting devices without relying on wired networks,
and avoiding the cost of installing wire conduits at sites where doing
so would be prohibitive.
IEEE 802.11 is not a wholesale replacement of broadband, but it is a
fast and efficient way to distribute broadband transmissions. Wireless
communication provides an easier way to connect devices, particularly
those in remote locations or critical environments.
802.11 Specifications
Standard
IEEE 802.11b
Year Approved
Compatibility
which operates in the 2.4 GHz frequency band at 11 Mbps, was the
first commercially successful WLAN technology.
As wireless technology matured, a higher transmission rate of 54
Mbps was achieved with 802.11g, which operates in the 2.4 GHz band,
and 802.11a, which operates in the 5 GHz frequency band.
IEEE 802.11a
IEEE 802.11g
1999
IEEE 802.11b compliant
1999
IEEE 802.11a compliant
2003
IEEE 802.11b/g compliant
2.4 GHz
20 MHz
1
11 Mbps
4
DSSS
5 GHz
20 MHz
1
54 Mbps
8
OFDM
2.4 GHz
20 MHz
1
54 Mbps
12a
OFDM, DSSS
Frequency Band
Channel Bandwidth
Number of Spatial Streams
Max. Data Rates
Data Rate Configurations
Spread Spectrum
6
Industrial Wireless IEEE 802.11 Solutions > Introduction to Industrial IEEE 802.11 Wireless
The IEEE 802.11 standard specifies a way to use radio frequency (RF)
technology to send Ethernet packets over the air. Today’s WLANs are
based on the IEEE 802.11 standard and referred to as Wi-Fi networks.
By common agreement between regulatory agencies around the world
(FCC, ETSI, etc.), a WLAN transmits over unlicensed spectrums, with
only minor variations from country to country. The 802.11b standard,
IEEE 802.11n
2009
IEEE 802.11a/b/g/n
compliant
2.4/5 GHz
20 or 40 MHz
1 to 4
600 Mbpsb
576
OFDM
a. IEEE 802.11b includes backwards compatibility.
b. Theoretical data rate with 4-stream MIMO
Next Generation High Bandwidth 802.11n Solutions
Moxa’s new generation IEEE 802.11n standard allows wireless
communication speeds to theoretically reach 300 Mbps with two
spatial streams. In order to achieve 300 Mbps, the physical layer needs
to support a higher transmission speed that is at least 50 times faster
than IEEE 802.11b and 10 times faster than IEEE 802.11g. To improve
wireless communication performance, IEEE 802.11n has added more
features to its MIMO technology, where multiple antennas are used to
increase transmission speed. MIMO (Multiple Input Multiple Output)
is a key technology in the 802.11n standard, and offers greater signal
level and communication capacity on the transmitter side and receiver
side, respectively. By simultaneously transmitting several signals on
the same transmission frequency but over two special streams, MIMO
delivers greater range and data throughput. With improved OFDM
(Orthogonal Frequency Division Multiplexing) modulation, MIMO
can use multiple carriers to transmit multiple signals that are then
combined into a single signal. This overcomes multipath fading effects
that would otherwise severely degrade received signal quality. As an
enhancement to existing 802.11 technologies, 802.11n offers a suite of
advanced new features that increase effective data throughput, extend
wireless coverage, and create more reliable networks.
Wireless Networking At-a-Glance
Wireless Security
Wireless networks use radio waves, which means that your signal can
be intercepted by other parties. A proper protection mechanism for
radio transmissions on any network is always a concern for protocol
designers. The right balance between security, transparency, and
cost effectiveness is important when determining the type of security
to use for your WLAN. You should take into account your target
environment, the security levels that your WLAN can support, and the
effect that stronger security methods could have on performance. The
following table summarizes implementation considerations and client
requirements when using different WLAN security strategies.
Method
Client Support
Considerations
WEP
Built-in support on all 802.11a, basic 802.11b, and 802.11g devices
WPA
Requires WPA-enabled system and network card driver
WPA2
Requires WPA-enabled system and network card driver
802.11X
Requires WPA-enabled system and network card driver
-Provides basic security
-Requires manual key management
-Provides dynamically generated keys that are periodically refreshed
-Provides similar shared key user authentication
-Provides robust security for small networks
-Provides robust security for small networks
-Wireless stations may require hardware to upgrade to support WPA2
-Provides dynamically generated keys that are backwards compatible with the original WPA technology
info@moxa.com
w w w. m o x a . c o m
6-3
Industrial Wireless IEEE 802.11 Solutions
WDS
A Wireless Distribution System (WDS) provides an easy way for APs
to communicate wirelessly with each other. As shown in the the figure
to the right, one AP acts as a wireless access point and forwards
packets to the other AP through the WDS before the packets are sent
to the Ethernet LAN.
In addition, two or more LAN segments can be connected wirelessly.
As illustrated in the figure to the right, a pair of wireless LAN-to-LAN
bridges is used to connect two LAN segments. Since the AP is WDSenabled, it can operate in bridge mode.
6
STP/RSTP
Industrial Wireless IEEE 802.11 Solutions > Introduction to Industrial IEEE 802.11 Wireless
Spanning Tree Protocol (STP) was designed to help reduce link failures
in a network and provide protection from loops. STP can effectively
increase system reliability to allow your network to run non-stop.
Networks that have a complicated architecture are prone to broadcast
storms caused by unintended loops in the network. STP is part of the
IEEE 802.1D standard (1998 Edition) bridge specification.
Rapid Spanning Tree Protocol (RSTP) implements the Spanning Tree
algorithm and protocol defined by the IEEE 802.1w-2001 standard.
RSTP is able to determine the topology of a bridged network much
more quickly than STP.
Industrial-grade Wireless LANs
Industrial environments are filled with hazards such as dust, EMI/
noise, and temperature extremes. To overcome these challenges,
Moxa’s industrial-grade outdoor wireless solutions are ruggedized
with IP68-rated housing that resists water, oil, and even corrosion
damage. In addition, Moxa’s AWK series meets or exceeds a number of
industry standards, such as EN50155 certification for rolling stock and
ULC1D2/ATEC or Class 1 Zone II for oil and gas.
AWK devices have redundant power and an extended temperature
range of -40 to 75°C on the T models. With this suite of industriallyhardened features and certifications, Moxa’s industrial-grade wireless
products offer the most benefits available, and are tough enough to
provide continuous, reliable, long-term operation in even the harshest
industrial environments.
Client-based Turbo Roaming for Seamless Connections
IEEE 802.11 technology gives networks an effective range of only a
few hundred meters. When wireless clients are on moving objects
they need to “roam” between many wireless access points. However,
in many applications users need an uninterrupted network data
connection when the client moves from one access point to another.
Without fast roaming time, constant roaming could create frequent
handoffs and poor performance. Moxa’s proprietary Turbo Roaming
has a fast handover time of less than 100 ms. Turbo Roaming
increases the roaming speed by unifying AP channels and avoiding
wasted channel-hopping time while roaming. Moxa’s APs support
Turbo Roaming technology to provide fast seamless roaming on
wireless networks.
Long-distance Communication
IEEE 802.11 standards are not designed for outdoor use, and
generally speaking, the range of a standard 802.11 wireless network
is only 100 to 300 meters. When the distance between two wireless
devices is increased, packets sent over such a long distance can
become unstable and create a drop in network performance. The
AWK’s support for long distance communication makes it easier to
6-4
w w w. m o x a . c o m
configure a long-distance solution .A proprietary algorithm developed
by Moxa can be used to determine which parameters should be used
to optimize performance. Practical uses of the algorithm include the
deployment of long-range point-to-point and point-to-multipoint
wireless networks at a reduced cost, and address issues related to
security, reliability, and speed.
info@moxa.com
Industrial Wireless
DI/DO
Moxa’s AWK devices provide a more modern wawy for system
operators to monitor remote APs with real-time alarm messages
that trigger almost instantaneously when exceptions occur. In other
words, warning messages are actively triggered in response to events
such as network and power interruptions. When integrated with other
important sensors via digital inputs (DI), the AWK can also provide
an automatic alarm mechanism. This is done by redirecting warning
messages to an IP network by email or log record.
AWK series products are also equipped with relay outputs (digital
output, DO) that can be configured to indicate the importance of events
when notifying or warning engineers in the field. Armed with this
timely information, engineers can respond to higher priority messages
quickly and with the appropriate emergency maintenance procedures.
6
Certified to Meet Industrial Reliability Standards
indicate which industrial control and information technology devices
are suitable for hazardous locations such as maritime environments,
mines, oil refineries, and other industrial settings. In addition,
environmental compliance with the EN50155 and EN50121-3-2
standards is essential for determining which devices can be used
safely and reliably in railway-related and on-train applications.
Industrial Wireless IEEE 802.11 Solutions > Introduction to Industrial IEEE 802.11 Wireless
Industrial environments often involve unknown, hazardous conditions
that can influence the operation of Ethernet devices. Failure in an
industrial system can cause serious disasters and even the loss of life
and property. Moxa’s industrial products have received UL/cUL Class
1 Division 2 and ATEX C1Z2 certifications, which were developed to
Wireless VLAN (Multi-SSID)
A Virtual LAN (VLAN) is a collection of clients or hosts grouped
together as if they were attached to the broadcast domains in a Layer
2 network. Based on the SSID, two or more clients can be added
to a VLAN and grouped into the same LAN segment regardless of
geographical location. Without additional routers, you can easily
use Layer 2 switches with AWK APs and set the broadcast domain
boundaries. VLANs provide network administrators with leeway in
addressing network security, management, and scalability issues.
WMM for Communication Prioritization
Quality of Service (QoS) is a network term for controlling
and measuring data transmission rates, throughput, and
error rates, and is becoming an essential part of wireless
communications when transmitting multimedia data, such as
audio and video. Some important data requires a high quality
of flow and throughput control and low error rates. WMM
(Wi-Fi Multimedia) is based on a subset of the IEEE 802.11e
protocol, which was designed to provide QoS on a WLAN.
WMM allows the prioritization of data transmissions to help
control the quality of communications.
Advanced Industrial Wireless Solutions
Moxa Makes Wireless Robust, Secure, and Reliable
Today’s wireless applications demand data integrity, secure
transmissions, and high overall network reliability. As a leader
in industrial device networking, Moxa provides you with more
comprehensive industrial wireless solutions and is ready to help you
ugrade to industry-leading WLAN solutions.
Moxa’s support of standards-based wireless products allows an
winning combination of reliability, redundancy and throughput in
secure wireless LANs. Moxa’s AWK series is more reliablle, featuring
increased RF redundancy, and faster Turbo Roaming for both indoor
and outdoor environments. Successful proven deployments in highly
demanding environments, such as mining, oil and gas, heavy industry
and railway systems, demonstrate the AWK’s unparalleled reliability
under extreme conditions.
info@moxa.com
w w w. m o x a . c o m
6-5
Industrial Wireless IEEE 802.11 Solutions
Wireless Bridging
Moxa’s Dual-RF solution provides a “Wireless Bridge” mode which
allows the user to form a master-slave bridge mode to link other
SSIDs and extend wireless coverage. This mode is designed to
provide a more optimized WDS mode that overcomes WDS mode’s
throughput problems, in which more nodes can cause a serious drop
6
Industrial Wireless IEEE 802.11 Solutions > Introduction to Industrial IEEE 802.11 Wireless
6-6
in throughput. With Wireless Bridge mode, the bandwidth of the
wireless link will not be reduced (from using Dual RF and isolation
of the overlap frequency channel), but instead will easily and flexibly
extend your wireless range.
Redundant Wireless
In most cases, radio interference occurs on a dedicated frequency
or a narrow frequency band. Utilizing two or more frequencies to
communicate at the same time can help maintain constant data
transmission, even if there is interference at one of the frequencies.
This strategy greatly increases the availability of wireless links and
makes the entire wireless network more reliable.
Moxa’s Dual-RF solutions feature two independent wireless
communication modules as well as multiple Ethernet ports. In addition
to being ideal for wireless infrastructures, these products can also
provide a more reliable connection and greater versatility for use on a
variety of industrial networks.
Redundant Roaming
By combining the advantages of two key techniques, Moxa’s Turbo
Roaming and dual RF redundancy, Moxa’s advanced redundant
roaming enhances secure mobility for mission-critical or latencysensitive applications, and can benefit from more rapid roaming with
a reliable wireless connection. The redundant mode of Moxa’s dual-RF
solutions allows for super fast roaming ensuring quick handoff for
roaming clients during the transition between access points. The two
RFs of wireless client will transmit data simultaneously, and when
they detect a weak or weakening AP signal, the dual RF client will
instantaneously start roaming for the next AP.
Industry-specific Innovative Wireless Solutions
In addition to its standard product offering, Moxa can provide
innovative custom engineering that can help realize any special
requirements for specific vertical market applications.
When paired with its WAC wireless controller, Moxa’s cutting-edge
Turbo Roaming technology can dramatically shrink roaming times
to within 50 ms across LANs, even beneath high levels of network
security. With Moxa’s mobile IP technology, handoff times can be
minimized even further, down to as low as 50ms, allowing wireless
clients to roam more rapidly across LANs than ever before. Moxa’s
controller-empowered Turbo Roaming is perfect for highly mobile
wireless communications environments like railways, where trainto-ground communications are of critical importance, or as in some
automation networks.
w w w. m o x a . c o m
Another tailored product of Moxa’s engineering is Auto Carriage
Connection (ACC), a technology designed to automatically establish
and maintain carriage-to-carriage connections in rolling stock
applications. ACC auto-negotiates connections between wireless units
to ease installation work when carriages are rearranged, and makes
wireless connectivity a rapidly configured, toil-free element of onboard
railways communications.
With its many successful deployments in highly demanding
environments like mines, in oil and gas fields and along pipelines, for
heavy industry or along railway systems, Moxa’s AWK line of wireless
devices are known for proven, unparalleled reliability under extreme
conditions. Please contact Moxa’s sales representatives for details
about our innovative wireless solutions.
info@moxa.com
Industrial Wireless
AWK-6232 Series
Industrial IEEE 802.11a/b/g/n IP68 dual-RF wireless AP/bridge/client
››IEEE 802.11a/b/g/n compliant
››Dual-RF design: 2.4 GHz and/or 5 GHz RF bands
››M12 anti-vibration connectors
››Industrial grade QoS (WMM) and VLAN supported
››Compliant with essential sections of EN 50155
››Rugged IP68-rated housing and -40 to 75°C operating
temperature
6
Industrial Wireless IEEE 802.11 Solutions > AWK-6232 Series
Dual RF
Wireless Redundancy
Introduction
Moxa’s AWK-6232 3-in-1 outdoor wireless AP/bridge/client meets
Dual
RF faster data transmission speeds and wider
the growing need
for
Wireless Redundancy
coverage by supporting IEEE 802.11n technology with a net data rate
of up to 300 Mbps. The AWK-6232 avoids interruptions in WLAN
transmissions with its dual 2.4/5 GHz RF modules, which allow two
independent wireless connections over different frequencies. The
AWK-6232 is compliant with the essential sections of EN 50155,
covering operating temperature, power input voltage, surge, ESD and
vibration. In addition, the AWK-6232 is housed in an IP68 metal casing
with M12 connectors for total protection against dust, water, vibration,
and other environmental effects.
Specifications
WLAN Interface
Standards:
IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseTX
IEEE 802.3ab for 1000BaseT
IEEE 802.3at for Power-over-Ethernet Plus
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q VLAN
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
• 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates
supported)
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
Improved Higher Data Rate and Bandwidth
• High-speed wireless connectivity with up to 300 Mbps data rate
• MIMO technology to improve the capacity of multiple data stream
transmits and receives
• Increased channel width with channel bonding technology
Industrial and Outdoor Rated Features for Critical
Environments
• IP68-rated metal housing and -40 to 75°C wide operating
temperature
• Anti-vibration M12 design and waterproof/dust-tight RJ45
connectors
• Wall, DIN-Rail, and pole mounting options for versatile outdoor
installation
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and
Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)
TX Transmit Power:
802.11b:
1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm)
802.11g:
6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 17 dBm (± 1.5 dBm)
54 Mbps: Typ. 15 dBm (± 1.5 dBm)
802.11a:
6 to 24 Mbps: Typ. 17 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 16 dBm (± 1.5 dBm)
54 Mbps: Typ. 14 dBm (± 1.5 dBm)
TX Transmit Power MIMO:
802.11a/n (20/40 MHz):
MCS15 20 MHz: Typ. 13 dBm (± 1.5 dBm)
info@moxa.com
w w w. m o x a . c o m
6-7
Industrial Wireless IEEE 802.11 Solutions
Alarm Contact (digital output, M12 connector): 1 relay output with
current carrying capacity of 1 A @ 24 VDC
Digital Inputs (M12 connector, male): 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Physical Characteristics
Housing: Metal, IP68 protection
Weight: 1.8 kg
Dimensions: 224 x 147.7 x 64.5 mm (8.82 x 5.82 x 2.54 in)
Installation: Wall mounting (standard), DIN-Rail mounting (optional),
pole mounting (optional)
Environmental Limits
Operating Temperature: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 100% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48
VDC Power-over-Ethernet plus (IEEE 802.3at compliant)
*Compliant with EN 50155 on 24 VDC
Industrial Wireless IEEE 802.11 Solutions > AWK-6232 Series
Connector: M12 male connector with A-coding
Power Consumption: 12 to 48 VDC, 1.5 A (max.)
Reverse Polarity Protection: Present
Protocol Support
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP,
TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols: ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024
Radio: EN 300 328, EN 301 893, DSPR (Japan)
Rail Traffic: EN 50155, EN 50121-1/4
Interface
Default Antennas: 4 dual-band omni-directional antennas, 5 dBi at 2.4
GHz, 2 dBi at 5 GHz, N-type (male)
Connector for External Antennas: N-type (female)
M12 Ports: 2, 10/100/1000BaseT(X), auto negotiation speed, F/H
duplex mode, and auto MDI/MDI-X connection (female)
Console Port: RS-232 (waterproof RJ45-type)
LED Indicators: PWR, FAULT, STATE, WLAN1, WLAN2, LAN1, LAN2
Note: Please check Moxa’s website for the most up-to-date certification status.
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
Unit: mm (inch)
26 31
41
147.74
6
MCS15 40 MHz: Typ. 12 dBm (± 1.5 dBm)
802.11g/n (20 MHz):
MCS15 20 MHz: Typ. 14 dBm (± 1.5 dBm)
RX Sensitivity:
802.11b:
-92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84
dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82
dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm
@ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82
dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm
@ 48 Mbps, -70 dBm @ 54 Mbps
RX Sensitivity MIMO:
802.11a/n:
-68 dBm @ MCS15 40 MHz, -70 dBm @ MCS7 40 MHz, -69 dBm @
MCS15 20 MHz, -71 dBm @ MCS7 20 MHz
802.11g/n:
-69 dBm @ MCS15 20 MHz, -71 dBm @ MCS7 20 MHz
34 25
224
Top & Bottom Views
64.5
71.5
Front View
Side Views
Rear View
Ordering Information
Available Models
Package Checklist
Note: Please visit Moxa’s website for a complete list of optional wireless accessories and
antennas available for Moxa’s wireless products.
• AWK-6232 wireless AP/bridge/client
• 4 dual-band omni-directional antennas (5/2 dBi, N-type male,
2.4/5 GHz)
• Wall mounting kit (includes 2 supports)
• Field-installable power plug
• Field-installable Ethernet plug
• 1 metal cap to cover M12-male DI/O connector
• 1 metal cap to cover RJ45 connector
• 1 metal cap to cover M12-female LAN connector
• 2 transparent plastic sticks for field-installable plugs
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
AWK-6232-M12-US-T: IEEE 802.11a/b/g/n IP68 dual-RF wireless AP/bridge/
client, US band, -40 to 75°C operating temperature
AWK-6232-M12-EU-T: IEEE 802.11a/b/g/n IP68 dual-RF wireless AP/bridge/
client, EU band, -40 to 75°C operating temperature
AWK-6232-M12-JP-T: IEEE 802.11a/b/g/n IP68 dual-RF wireless AP/bridge/
client, JP band, -40 to 75°C operating temperature
6-8
w w w. m o x a . c o m
info@moxa.com
Industrial Wireless
AWK-5232 Series
Industrial IEEE 802.11a/b/g/n dual-RF wireless AP/bridge/client
››IEEE 802.11a/b/g/n compliant
››Dual-RF design: 2.4 GHz and/or 5 GHz RF bands
››Redundant power inputs and PoE+
››Compliant with essential sections of EN 50155
››-40 to 75°C operating temperature range (T models)
6
Industrial Wireless IEEE 802.11 Solutions > AWK-5232 Series
Dual RF
Wireless Redundancy
Introduction
The AWK-5232 Industrial
a/b/g/n Wireless AP/Bridge/Client is an
Dual RF
ideal wirelessWireless
solution
for hard-to-wire situations and all mobile
Redundancy
equipment which is connected over a TCP/IP network. It can
provide a faster connection and wider range than 802.11g models,
especially a noticeably stronger connection at distance. With two
independent RF modules, the AWK-5232 supports a great variety of
wireless configurations and applications, and the redundant wireless
connections increase the reliability of the entire wireless network.
The AWK-5232 is compliant with the essential sections of EN 50155,
covering operating temperature, power input voltage, surge, ESD
and vibration. The AWK-5232’s two DC power inputs increases the
power supply reliability, and it can also be powered via PoE+ for easier
deployment.
Specifications
WLAN Interface
Standards:
IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseTX
IEEE 802.3ab for 1000BaseT
IEEE 802.3at for Power-over-Ethernet Plus
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
• 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates
supported)
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
Higher Data Rate and Greater Bandwidth
• High-speed wireless connectivity with up to 300 Mbps data rate
• MIMO technology improves data throughput via mulitplexed, smart
antenna transmissions and receptions
• Channel bonding technology for increased throughput or channel
redundancy
Redundancy to Increase System Reliability
• Dual DC power inputs and PoE+
• Immunity against disconnection caused by radio interference
Specifications for Industrial-grade Applications
•
•
•
•
•
64-bit and 128-bit WEP (Wired Equivalent Privacy)
Enable/disable SSID broadcasts
Power filters for access control
IEEE/802.11X/RADIUS supported
WPA/WPA2/802.11i supported
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and
Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)
TX Transmit Power:
802.11b:
1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm)
802.11g:
6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 17 dBm (± 1.5 dBm)
54 Mbps: Typ. 15 dBm (± 1.5 dBm)
802.11a:
6 to 24 Mbps: Typ. 17 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 16 dBm (± 1.5 dBm)
54 Mbps: Typ. 14 dBm (± 1.5 dBm)
TX Transmit Power MIMO:
802.11a/n (20/40 MHz):
MCS15 20 MHz: Typ. 13 dBm (± 1.5 dBm)
MCS15 40 MHz: Typ. 12 dBm (± 1.5 dBm)
info@moxa.com
w w w. m o x a . c o m
6-9
Industrial Wireless IEEE 802.11 Solutions
Protocol Support
LED Indicators: PWR1, PWR2, PoE+, FAULT, STATE, WLAN1, WLAN2,
100M, 1000M (TP Ports), LAN1, LAN2 (M12 Ports)
Alarm Contact (Digital Output): 1 relay output with current carrying
capacity of 1 A @ 24 VDC
Digital Inputs: 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Physical Characteristics
Housing: Metal, IP30 protection
Weight: 1.2 Kg
Dimensions: 74.55 x 135 x 105 mm (2.94 x 5.31 x 4.13 in)
Installation: DIN-Rail mounting (standard), wall mounting (optional)
Environmental Limits
Operating Temperature:
Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48
VDC Power-over-Ethernet Plus (IEEE 802.3at compliant)
*Compliant with EN 50155 on 24 VDC
Connector: 10-pin removable terminal block
Power Consumption: 12 to 48 VDC, 1.5 A (max.)
Reverse Polarity Protection: Present
Interface
Default Antennas*: 4 dual-band omni-directional antennas, 2 dBi,
RP-SMA (male)
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024,
IEC 61000-6-2/4
Radio: EN 300 328, EN 301 893
Rail Traffic: EN 50155, EN 50121-1/4
*Only available with the AWK-5232 model.
Connector for External Antennas:
AWK-5232: RP-SMA (female)
AWK-5232-M12: QMA (female)
RJ45 Ports: 2, 10/100/1000BaseT(X), auto negotiation speed, F/H
duplex mode, and auto MDI/MDI-X connection (AWK-5232 only)
M12 Ports: 2, 10/100/1000BaseT(X) auto negotiation speed, F/H
duplex mode, and auto MDI/MDI-X connection (AWK-5232-M12 only)
Console Port: RS-232 (RJ45-type)
Note: Please check Moxa’s website for the most up-to-date certification status.
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
Unit: mm (inch)
97 (3.82)
134 (5.28)
97 (3.82)
67.5 (2.66)
74.55 (2.94)
135 (5.31)
AWK-5232-M12
AWK-5232
135 (5.31)
Industrial Wireless IEEE 802.11 Solutions > AWK-5232 Series
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP,
TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols: ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
134 (5.28)
6
802.11g/n (20 MHz):
MCS15 20 MHz: Typ. 14 dBm (± 1.5 dBm)
RX Sensitivity:
802.11b:
-92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84
dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82
dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm
@ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82
dBm @ 18 Mbps,
-80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70
dBm @ 54 Mbps
RX Sensitivity MIMO:
802.11a/n:
-68 dBm @ MCS15 40 MHz, -69 dBm @ MCS15 20 MHz,
-70 dBm @ MCS7 40 MHz, -71 dBm @ MCS7 20 MHz
802.11g/n:
-69 dBm @ MCS15 20 MHz, -71 dBm @ MCS7 20 MHz
104.2 (4.10)
67.5 (2.66)
74.55 (2.94)
Front Views
Rear View
Side View
Top & Bottom Views
Ordering Information
Model Name
AWK-5232
AWK-5232-US
AWK-5232-EU
AWK-5232-JP
AWK-5232-US-T
AWK-5232-EU-T
AWK-5232-JP-T
AWK-5232-M12
AWK-5232-M12-US
AWK-5232-M12-EU
AWK-5232-M12-JP
AWK-5232-M12-US-T
AWK-5222-M12-EU-T
AWK-5232-M12-JP-T
6-10
Available Models
Standard
Temperature
(-25 to 60°C)
Wide
Temperature
(-40 to 75°C)
Port Interface
2, 10/100BaseT(X)
RJ45
M12
Antenna Interface
RP-SMA
QMA
P
P
P
–
–
–
–
–
–
P
P
P
P
P
P
P
P
P
–
–
–
–
–
–
P
P
P
P
P
P
–
–
–
–
–
–
P
P
P
–
–
–
–
–
–
P
P
P
–
–
–
–
–
–
P
P
P
P
P
P
–
–
–
–
–
–
P
P
P
P
P
P
w w w. m o x a . c o m
info@moxa.com
Package Checklist
• AWK-5232 wireless AP/bridge/client
• Cable holder with 1 screw
• 2 plastic RJ45 protective caps for LAN
& Console ports
• 1 plastic M12-female protective cap
(AWK-5232-M12 only)
• DIN-rail kit
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
Note:
US: USA band
EU: Europe band
JP: Japan band
Industrial Wireless
AWK-6222 Series
Industrial IEEE 802.11a/b/g IP68 dual-RF wireless AP/bridge/client
››IEEE 802.11a/b/g compliant
››Dual-RF design: 2.4 GHz and/or 5 GHz RF bands
››Supports 100 ms redundant roaming
››Compliant with essential sections of EN 50155
››Rugged IP68-rated housing and -40 to 75°C operating
temperature
6
Introduction
The AWK-6222 outdoor wireless AP/bridge/client avoids interruptions
Dual RF
in WLAN
transmissions with its dual 2.4/5 GHz RF modules, which
Wireless Redundancy
allow two independent wireless connections over different frequencies.
To maximize wireless and wired network availability, the AWK6222 can incorporate Ethernet redundancy using RSTP, and power
redundancy using dual DC power inputs and PoE. In addition, the
AWK-6222 is housed in an IP68 metal casing with M12 connectors for
total protection against dust, water, vibration, and other environmental
effects. This rugged unit supports seamless roaming to achieve ultrareliable and redundant wireless networks under challenging outdoor,
mobile conditions. These industrially hardened features let you set up
a rock-solid WLAN to ensure that your entire network will always be in
service.
The AWK-6222 is compliant with the essential sections of EN 50155,
covering operating temperature, power input voltage, surge, ESD and
vibration.
Redundancy to Increase System Reliability
• PoE and dual DC power inputs
• Dual RF design with 2.4 and/or 5 GHz dual-band operation for
redundant WLAN connections
• Redundant roaming for fast and stable handoff
• Ethernet redundancy via RSTP
Industrial and Outdoor Rated Features for Critical
Environments
• IP68-rated metal housing and -40 to 75°C wide operating
temperature
• Long-distance wireless transmission over 10 km
• Anti-vibration M12 design and waterproof/dust-tight RJ45
connectors
• Wall, DIN-Rail, and pole mounting options for versatile outdoor
installation
Industrial Wireless IEEE 802.11 Solutions > AWK-6222 Series
Dual RF
Wireless Redundancy
Specifications
WLAN Interface
Standards:
IEEE 802.11a/b/g for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT(X)
IEEE 802.3u for 100BaseT(X)
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA/WPA2 Personal and
Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
TX Transmit Power:
802.11b:
Typ. 23±1.5 dBm @ 1 to 11 Mbps
info@moxa.com
w w w. m o x a . c o m
6-11
Industrial Wireless IEEE 802.11 Solutions
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Physical Characteristics
Housing: Metal, IP68 protection
Weight: 1.8 kg
Dimensions: 224 x 147.7 x 64.5 mm (8.82 x 5.82 x 2.54 in)
Installation: Wall mounting (standard), DIN-Rail mounting (optional),
pole mounting (optional)
Environmental Limits
Operating Temperature: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 100% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48
VDC Power-over-Ethernet (IEEE 802.3af compliant)
*Compliant with EN 50155 on 24 VDC
Connector: M12 male connector with A-coding
Power Consumption:
• 12 to 48 VDC, 800 mA (max.)
• 12 to 48 VDC, 1.066 to 0.312 A
Reverse Polarity Protection: Present
Protocol Support
Industrial Wireless IEEE 802.11 Solutions > AWK-6222 Series
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP,
TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols: ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
Standards and Certifications
Interface
Safety: UL 60950-1, EN 60950-1
Hazardous Location: UL/cUL Class I Division 2, ATEX Zone 2
(Pending)
EMC: EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024
Radio: EN 300 328, EN 301 893, DSPR (Japan)
Rail Traffic: EN 50155, EN 50121-1/4
Default Antennas: 2 dual-band omni-directional antennas, 5 dBi at 2.4
GHz, 2 dBi at 5 GHz, N-type (male)
RJ45 Ports: 2, 10/100BaseT(X), auto negotiation speed, F/H duplex
mode, and auto MDI/MDI-X connection
Connector for External Antennas: N-type (female)
Console Port: RS-232 (waterproof RJ45-type)
LED Indicators: PWR, FAULT, STATE, WLAN1, WLAN2, LAN1, LAN2
Alarm Contact (digital output, M12 female connector): 1 relay output
with current carrying capacity of 1 A @ 24 VDC
Digital Inputs (M12 female connector): 2 electrically isolated inputs
• +13 to +30 V for state “1”
Note: Please check Moxa’s website for the most up-to-date certification status.
Reliability
MTBF (mean time between failures): 284,072 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
Unit: mm (inch)
147.7 (5.82)
6
802.11g:
Typ. 20±1.5 dBm @ 6 to 24 Mbps, Typ. 19±1.5 dBm @ 36 Mbps, Typ.
18±1.5 dBm @ 48 Mbps, Typ. 17±1.5 dBm @ 54 Mbps
802.11a:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps,
Typ. 15±1.5 dBm @ 54 Mbps
RX Sensitivity:
802.11b:
-97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90
dBm @ 11 Mbps
802.11g:
-93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 12 Mbps, -88
dBm @ 18 Mbps, -84 dBm @ 24 Mbps, -80 dBm @ 36 Mbps, -76 dBm
@ 48 Mbps, -74 dBm @ 54 Mbps
802.11a:
-90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 12 Mbps, -85
dBm @ 18 Mbps, -83 dBm @ 24 Mbps, -79 dBm @ 36 Mbps, -75 dBm
@ 48 Mbps, -74 dBm @ 54 Mbps
224.0 (8.82)
64.5 (2.54)
Top & Bottom Views
Front View
Side View
Rear View
Ordering Information
Available Models
AWK-6222-US-T: IEEE 802.11a/b/g IP68 dual-RF wireless AP/bridge/
client, US band, -40 to 75°C operating temperature
AWK-6222-EU-T: IEEE 802.11a/b/g IP68 dual-RF wireless AP/bridge/
client, EU band, -40 to 75°C operating temperature
AWK-6222-JP-T: IEEE 802.11a/b/g IP68 dual-RF wireless AP/bridge/
client, JP band, -40 to 75°C operating temperature
Note: Please visit Moxa’s website for a complete list of optional wireless
accessories and antennas available for Moxa’s wireless products.
6-12
w w w. m o x a . c o m
Package Checklist
•
•
•
•
•
•
•
•
•
•
•
•
AWK-6222 wireless AP/bridge/client
2 dual-band omni-directional antennas (5/2 dBi, N-type male, 2.4/5 GHz)
Wall mounting kit (includes 2 supports)
Field-installable power plug
Field-installable RJ45 plug
Metal cap to cover M12-female DI/O connector
2 metal caps to cover RJ45 connectors
2 metal caps to cover N-type connectors
Transparent plastic sticks for field-installable plugs
Documentation and software CD
Quick installation guide (printed)
Warranty card
info@moxa.com
Industrial Wireless
AWK-5222 Series
Industrial IEEE 802.11a/b/g dual-RF wireless AP/bridge/client
››IEEE 802.11a/b/g compliant
››Dual-RF design: 2.4 GHz and/or 5 GHz RF bands
››Supports 100 ms redundant roaming
››Compliant with essential sections of EN 50155
››-40 to 75°C operating temperature range (T models)
6
Introduction
Moxa’s wireless redundancy technology allows you to set up
independent
wireless connections to avoid interruptions in
Dual RF
transmission,
Wireless Redundancy even if interference occurs on one of the supported
frequencies. The AWK-5222 is equipped with the newest proprietary
wireless redundancy technology, which has two independent RF
modules, and supports a greater variety of wireless configurations
and applications. The redundant wireless connections increase
the reliability of the entire wireless network. The AWK-5222 is
compliant with the essential sections of EN 50155, covering operating
temperature, power input voltage, surge, ESD and vibration. The AWK5222 is rugged enough to help you establish the most robust wireless
connection for critical industrial wireless applications.
Redundancy to Increase System Reliability
• Dual DC power inputs and PoE
• Dual RF design with 2.4 and/or 5 GHz dual-band operation for
redundant WLAN connections
• Redundant roaming for fast and stable handoff
• Ethernet redundancy via RSTP
Specifications for Industrial-grade Applications
•
•
•
•
Industrial-grade QoS and VLAN for efficient data traffic management
Long-distance wireless transmission over 10 km
Integrated DI/DO for on-site monitoring and warnings
Signal strength LEDs for easy deployment and antenna alignment
Specifications
WLAN Interface
Standards:
IEEE 802.11a/b/g for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT(X)
IEEE 802.3u for 100BaseT(X)
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
64QAM @ 54 Mbps, 16QAM @ 24/36 Mbps, QPSK @ 12/18 Mbps,
CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBSK@ 1 Mbps
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2 Personal and
Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
TX Transmit Power:
802.11b:
Typ. 23±1.5 dBm @ 1 to 11 Mbps
802.11g:
Typ. 20±1.5 dBm @ 6 to 24 Mbps, Typ. 19±1.5 dBm @ 36 Mbps, Typ.
18±1.5 dBm @ 48 Mbps, Typ. 17±1.5 dBm @ 54 Mbps
802.11a:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps,
Typ. 15±1.5 dBm @ 54 Mbps
RX Sensitivity:
802.11b:
-97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90
dBm @ 11 Mbps
802.11g:
-93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 12 Mbps, -88
dBm @ 18 Mbps, -84 dBm @ 24 Mbps, -80 dBm @ 36 Mbps, -76 dBm
@ 48 Mbps, -74 dBm @ 54 Mbps
802.11a:
-90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 12 Mbps, -85
dBm @ 18 Mbps, -83 dBm @ 24 Mbps, -79 dBm @ 36 Mbps, -75 dBm
@ 48 Mbps, -74 dBm @ 54 Mbps
info@moxa.com
w w w. m o x a . c o m
Industrial Wireless IEEE 802.11 Solutions > AWK-5222 Series
Dual RF
Wireless Redundancy
6-13
Industrial Wireless IEEE 802.11 Solutions
Protocol Support
Environmental Limits
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP,
TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols: ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
Operating Temperature:
Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Interface
Default Antennas*:
2 dual-band omni-directional antennas, 2 dBi, RP-SMA (male)
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48
VDC Power-over-Ethernet (IEEE 802.3af compliant)
*Only available with the AWK-5222 model
*Compliant with EN 50155 on 24 VDC
Connector: 10-pin removable terminal block
Power Consumption: 12 to 48 VDC, 800 mA (max.)
Reverse Polarity Protection: Present
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024,
IEC 61000-6-2/4
Radio: EN 300 328, EN 301 893
Rail Traffic: EN 50155, EN 50121-1/4
Note: Please check Moxa’s website for the most up-to-date certification status.
Reliability
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Housing: Metal, IP30 protection
Weight: 1.1 kg
Dimensions: 62 x 135 x 105 mm (2.44 x 5.31 x 4.13 in)
Installation: DIN-Rail mounting (standard), Wall mounting (optional)
Dimensions
AWK-5222
Unit: mm (inch)
AWK-5222-M12
134 (5.28)
135 (5.31)
156.3 (6.15)
3.7 (.54)
97 (3.82)
135 (5.31)
145.6 (5.73)
Industrial Wireless IEEE 802.11 Solutions > AWK-5222 Series
MTBF (mean time between failures):
AWK-5222: 291,367 hrs
Physical Characteristics
134 (5.28)
6
Connector for External Antennas:
AWK-5222: RP-SMA (female)
AWK-5222-M12: QMA (female)
RJ45 Ports: 2, 10/100BaseT(X), auto negotiation speed, F/H duplex
mode, and auto MDI/MDI-X connection (AWK-5222 only)
M12 Ports: 2, 10/100BaseT(X) auto negotiation speed, F/H duplex
mode, and auto MDI/MDI-X connection (AWK-5222-M12 only)
Console Port: RS-232 (RJ45-type)
LED Indicators: PWR1, PWR2, PoE, FAULT, STATE, WLAN1, WLAN2,
10M, 100M (TP port), LAN1, LAN2 (M12 port)
Alarm Contact (digital output): 1 relay output with current carrying
capacity of 1 A @ 24 VDC
Digital Inputs: 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
55 (2.17)
62 (2.44)
55 (2.17)
62 (2.44)
105 (4.13)
Front Views
Side Views
Top & Bottom Views
Ordering Information
Model Name
AWK-5222
AWK-5222-US
AWK-5222-EU
AWK-5222-US-T
AWK-5222-EU-T
AWK-5222-M12
AWK-5222-M12-US
AWK-5222-M12-EU
AWK-5222-M12-JP
AWK-5222-M12-US-T
AWK-5222-M12-EU-T
AWK-5222-M12-JP-T
Note:
US: USA band
EU: Europe band
JP: Japan band
Available Models
Standard
Temperature
(-25 to 60°C)
Wide
Temperature
(-40 to 75°C)
Port Interface
2, 10/100BaseT(X)
RJ45
M12
Antenna Interface
RP-SMA
QMA
P
P
–
–
–
–
P
P
P
P
P
P
–
–
–
–
P
P
P
P
–
–
–
–
P
P
P
–
–
–
–
–
–
P
P
P
–
–
–
–
–
–
P
P
P
P
P
P
–
–
–
–
–
–
P
P
P
P
P
P
Note: Please visit Moxa’s website for a complete list of optional wireless accessories and antennas available for Moxa’s
wireless products.
6-14
w w w. m o x a . c o m
info@moxa.com
Package Checklist
• AWK-5222 wireless AP/bridge/
client
• Cable holder with one screw
• 2 plastic RJ45 protective caps for
LAN & Console ports
• DIN-Rail kit
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
Note: 2 dual-band omni-directional
antennas are included with the AWK5222 model.
Industrial Wireless
AWK-4131 Series
Industrial IEEE 802.11a/b/g/n IP68 wireless AP/bridge/client
››IEEE 802.11a/b/g/n compliant
››One M12/SFP Gigabit combo port
››Up to 300 Mbps data rate
››M12 anti-vibration connector
››Compliant with essential sections of EN 50155
››MIMO technology increases data throughput and range
››Rugged IP68-rated housing and -40 to 75°C operating
temperature
The AWK-4131 is a 3-in-1 industrial wireless AP/bridge/client that
meets the growing need for faster data transmission speeds and wider
coverage by supporting IEEE 802.11n technology with a net data rate
of up to 300 Mbps. The AWK-4131 is compliant with the essential
sections of EN 50155, covering operating temperature, power input
voltage, surge, ESD and vibration. With a wide -40 to 75°C operating
temperature and dust-tight/weatherproof IP68-rated design, the
AWK-4131 allows you to extend existing wired networks to outdoor
locations. The AWK-4131 can operate on either the 2.4 or 5 GHz bands
and is backwards-compatible with existing 802.11a/b/g deployments
to future-proof your wireless investments.
Higher Data Rate and Greater Bandwidth
• High-speed wireless connectivity with up to 300 Mbps data rate
• MIMO technology to improve the capacity of multiple data stream
transmits and receives
• Increased channel width with channel bonding technology
Industrial and Outdoor Features for Critical Environments
•
•
•
•
Industrial-grade QoS and VLAN for efficient data traffic management
IP68-rated metal housing and -40 to 75°C wide operating temperature
PoE and dual DC power inputs
Integrated DI/DO for on-site monitoring and warnings
Specifications
WLAN Interface
Standards:
IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
• 802.11n: 64QAM @ 300 bps to BPSK @ 6.5 Mbps (multiple rates
supported)
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA/WPA2-Personal and
Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)
TX Transmit Power:
802.11b:
1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm)
802.11g:
6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 17 dBm (± 1.5 dBm)
54 Mbps: Typ. 15 dBm (± 1.5 dBm)
802.11a:
6 to 24 Mbps: Typ. 17 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 16 dBm (± 1.5 dBm)
54 Mbps: Typ. 14 dBm (± 1.5 dBm)
TX Transmit Power MIMO:
802.11a/n (20/40 MHz):
MCS15 20 MHz: Typ. 13 dBm (± 1.5 dBm)
MCS15 40 MHz: Typ. 12 dBm (± 1.5 dBm)
802.11g/n (20 MHz):
info@moxa.com
w w w. m o x a . c o m
Industrial Wireless IEEE 802.11 Solutions > AWK-4131 Series
Introduction
6
6-15
Industrial Wireless IEEE 802.11 Solutions
Alarm Contact (digital output, M12 male connector): 1 relay output
with current carrying capacity of 1 A @ 24 VDC
Digital Inputs (M12 connector, male): 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Physical Characteristics
Housing: Metal, IP68 protection
Weight: 1.8 kg
Dimensions: 224 x 147.7 x 64.5 mm (8.82 x 5.82 x 2.54 in)
Installation: Wall mounting (standard), DIN-Rail mounting (optional),
pole mounting (optional)
Environmental Limits
Operating Temperature: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 100% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48
VDC Power-over-Ethernet (IEEE 802.3af compliant)
*Compliant with EN 50155 on 24 VDC
Industrial Wireless IEEE 802.11 Solutions > AWK-4131 Series
Protocol Support
Connector: M12 connector with A-coding
Power Consumption: 12 to 48 VDC, 890mA (max.)
Reverse Polarity Protection: Present
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP,
TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols: ARP, BOOTP, DHCP, dynamic VLAN-Tags for
802.1X-Clients, STP/RSTP (IEEE 802.1D/w)
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024
Radio: EN 300 328, EN 301 893, DSPR (Japan)
Rail Traffic: EN 50155, EN 50121-1/4
Interface
Default Antennas: 2 dual-band omni-directional antennas, 5 dBi at 2.4
GHz, 2 dBi at 5 GHz, N-type (male)
Connector for External Antennas: N-type (female)
Fiber Ports: 1, 1000BaseSFP slot
M12 Ports: 1, 10/100/1000BaseT(X), auto negotiation speed, F/H
duplex mode, and auto MDI/MDI-X connection (M12 female type)
Console Port: RS-232 (waterproof RJ45-type)
LED Indicators: PWR, FAULT, STATE, WLAN, LAN
Note: Please check Moxa’s website for the most up-to-date certification status.
Reliability
MTBF (mean time between failures): 367,406 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
Unit: mm (inch)
147.74 (5.82)
168.77 (6.64)
6
MCS15 20 MHz: Typ. 14 dBm (± 1.5 dBm)
RX Sensitivity:
802.11b:
-92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84
dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82
dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm
@ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82
dBm @ 18 Mbps,
-80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70
dBm @ 54 Mbps
RX Sensitivity MIMO:
802.11a/n:
-68 dBm @ MCS15 40 MHz, -69 dBm @ MCS15 20 MHz,
-70 dBm @ MCS7 40 MHz, -71 dBm @ MCS7 20 MHz
802.11g/n:
-69 dBm @ MCS15 20 MHz, -71 dBm @ MCS7 20 MHz
61.5 (2.42)
224 (8.82)
66.5 (2.62)
Side Views
Top & Bottom Views
Front View
Rear View
Ordering Information
Available Models
AWK-4131-M12-US-T: IEEE 802.11a/b/g/n IP68 wireless AP/bridge/
client, M12 Connector, US band, -40 to 75°C operating temperature
AWK-4131-M12-EU-T: IEEE 802.11a/b/g/n IP68 wireless AP/bridge/
client, M12 Connector, EU band, -40 to 75°C operating temperature
AWK-4131-M12-JP-T: IEEE 802.11a/b/g/n IP68 wireless AP/bridge/
client, M12 Connector, JP band, -40 to 75°C operating temperature
Note: Please visit Moxa’s website for a complete list of optional wireless
accessories and antennas available for Moxa’s wireless products.
6-16
w w w. m o x a . c o m
Package Checklist
•
•
•
•
•
•
•
•
•
•
•
AWK-4131-M12 wireless AP/bridge/client
2 dual-band omni-directional antennas (5/2 dBi, N-type male, 2.4/5 GHz)
Wall mounting kit (includes 2 supports)
Field-installable power plug
Field-installable Ethernet plug
Metal cap to cover M12 male DI/O connector
Metal caps to cover RJ45 connectors
Metal cap to cover SFP connector
Documentation and software CD
Quick installation guide (printed)
Warranty card
info@moxa.com
Industrial Wireless
AWK-3131 Series
Industrial IEEE 802.11a/b/g/n wireless AP/bridge/client
››IEEE 802.11a/b/g/n compliant
››Up to 300 Mbps data rate
››MIMO technology increases data throughput and range
››Compliant with essential sections of EN 50155
››M12 anti-vibration connectors (AWK-3131-M12)
››-40 to 75°C operating temperature range (T models)
The AWK-3131 3-in-1 industrial wireless AP/bridge/client meets the
growing need for faster data transmission speeds by supporting IEEE
802.11n technology with a net data rate of up to 300 Mbps. The AWK3131 is compliant with the essential sections of EN 50155, covering
operating temperature, power input voltage, surge, ESD and vibration.
The two redundant DC power inputs increase the reliability of the
power supply, and the AWK-3131 can be powered via PoE to make
deployment easier. The AWK-3131 can operate on either the 2.4 or 5
GHz bands and is backwards-compatible with existing 802.11a/b/g
deployments to future-proof your wireless investments.
Improved Higher Data Rate and Bandwidth
• High-speed wireless connectivity with up to 300 Mbps data rate
• MIMO technology to improve the capability of transmitting and
receiving multiple data streams
• Increased channel width with channel bonding technology
Specifications for Industrial-grade Applications
• Industrial-grade QoS and VLAN for efficient data traffic
management
• Integrated DI/DO for on-site monitoring and warnings
• Signal strength LEDs for easy deployment and antenna alignment
Specifications
WLAN Interface
Standards:
IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
• 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates
supported)
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and
Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)
TX Transmit Power:
802.11b:
1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm)
802.11g:
6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 17 dBm (± 1.5 dBm)
54 Mbps: Typ. 15 dBm (± 1.5 dBm)
802.11a:
6 to 24 Mbps: Typ. 17 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 16 dBm (± 1.5 dBm)
54 Mbps: Typ. 14 dBm (± 1.5 dBm)
TX Transmit Power MIMO:
802.11a/n (20/40 MHz):
MCS15 20 MHz: Typ. 13 dBm (± 1.5 dBm)
802.11g/n (20 MHz):
MCS15 20 MHz: Typ. 14 dBm (± 1.5 dBm)
RX Sensitivity:
802.11b:
-92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84
dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82
dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm
@ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82
dBm @ 18 Mbps,
-80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70
dBm @ 54 Mbps
info@moxa.com
w w w. m o x a . c o m
Industrial Wireless IEEE 802.11 Solutions > AWK-3131 Series
Introduction
6
6-17
Industrial Wireless IEEE 802.11 Solutions
• +3 to -30 V for state “0”
• Max. input current: 8 mA
RX Sensitivity MIMO:
802.11a/n:
-68 dBm @ MCS15 40 MHz,
-69 dBm @ MCS15 20 MHz,
-70 dBm @ MCS7 40 MHz,
-71 dBm @ MCS7 20 MHz
802.11g/n:
-69 dBm @ MCS15 20 MHz,
-71 dBm @ MCS7 20 MHz
Physical Characteristics
Housing: Metal, IP30 protection
Weight: 970 g
Dimensions: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Installation: DIN-Rail mounting (standard), wall mounting (optional)
Environmental Limits
Protocol Support
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP,
TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols: ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
Interface
6
Default Antennas*: 2 dual-band omni-directional antennas, 2 dBi,
RP-SMA (male)
*Only available with the AWK-3131 model.
Dimensions
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48
VDC Power-over-Ethernet (IEEE 802.3af compliant)
*Compliant with EN 50155 on 24 VDC
Connector: 10-pin removable terminal block
Power Consumption: 12 to 48 VDC, 700 mA
Reverse Polarity Protection: Present
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024
Radio: EN 300 328, EN 301 893, DSPR (Japan)
Rail Traffic: EN 50155, EN 50121-1/4
Note: Please check Moxa’s website for the most up-to-date certification status.
Reliability
MTBF (mean time between failures):
AWK-3131: 388,581 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Unit: mm (inch)
AWK-3131 AWK-3131-M12
151.85 (5.98)
135 (5.31)
134 (5.28)
45.8 (1.80)
52.85 (2.08)
151.85 (5.98)
135 (5.31)
134 (5.28)
45.8 (1.80)
52.85 (2.08)
70.15 (2.76)
97 (3.82)
97 (3.82)
Industrial Wireless IEEE 802.11 Solutions > AWK-3131 Series
Connector for External Antennas:
AWK-3131: RP-SMA (female)
AWK-3131-M12: QMA (female)
RJ45 Ports: 1, 10/100/1000BaseT(X) auto negotiation speed, F/H
duplex mode, and auto MDI/MDI-X connection (AWK-3131 only)
Fiber Ports: 1, 1000BaseSFP slot (AWK-3131 only)
M12 Ports: 1, 10/100/1000BaseT(X) auto negotiation speed, F/H
duplex mode, and auto MDI/MDI-X connection (AWK-3131-M12 only)
Console Port: RS-232 (RJ45-type)
LED Indicators: PWR1, PWR2, PoE, FAULT, STATE, signal strength,
WLAN, LAN
Alarm Contact (Digital Output): 1 relay output with current carrying
capacity of 1 A @ 24 VDC
Digital Inputs: 2 electrically isolated inputs
• +13 to +30 V for state “1”
Operating Temperature:
Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
105 (4.13)
105 (4.13)
18 (0.71)
117.7 (4.63)
Front and Rear Views
Side Views
Ordering Information
Available Model
Standard
Temperature
Model Name
(-25 to 60°C)
AWK-3131
P
AWK-3131-US
P
AWK-3131-EU
P
AWK-3131-JP
AWK-3131-US-T
–
AWK-3131-EU-T
–
AWK-3131-JP-T
–
AWK-3131-M12
P
AWK-3131-M12-US
P
AWK-3131-M12-EU
P
AWK-3131-M12-JP
AWK-3131-M12-US-T
–
AWK-3131-M12-EU-T
–
AWK-3131-M12-JP-T
–
Note:
US: USA band
EU: Europe band
JP: Japan band
6-18
Wide
Temperature
(-40 to 75°C)
Port Interface
Combo RJ45 & SFP
M12
10/100/1000BaseT(X)
10/100/1000BaseT(X)
or 1000BaseSFP
Antenna Interface
RP-SMA
QMA
–
–
–
P
P
P
P
P
P
P
P
P
–
–
–
–
–
–
P
P
P
P
P
P
–
–
–
–
–
–
–
–
–
P
P
P
–
–
–
–
–
–
P
P
P
P
P
P
–
–
–
–
–
–
P
P
P
P
P
P
w w w. m o x a . c o m
info@moxa.com
Package Checklist
• AWK-3131 wireless AP/
bridge/client
• Cable holder with one screw
• 2 plastic RJ45 protective
caps
• 1 plastic SFP protective cap
(AWK-3131 only)
• 1 plastic M12-female
protective cap (AWK3131-M12 only)
• DIN-rail kit
• Documentation and software
CD
• Quick installation guide
(printed)
• Warranty card
Industrial Wireless
AWK-4121 Series
Industrial IEEE 802.11a/b/g IP68 wireless AP/bridge/client
››IEEE 802.11a/b/g compliant
››Redundant 24 VDC power inputs or PoE
››QoS (WMM) and VLAN for efficient network traffic
››Supports long-distance data transfer and 100 ms Turbo Roaming
››Compliant with essential sections of EN 50155
››Rugged IP68-rated housing and -40 to 75°C operating
temperature
The AWK-4121 outdoor wireless AP/bridge/client is the ideal outdoor
wireless solution for industrial applications that are hard to wire,
too expensive to wire, or use mobile equipment that connect to a
TCP/IP network. The AWK-4121’s dust-tight/weatherproof design is
IP68-rated, allowing you to extend existing wired networks to outdoor
locations and critical environments. The two redundant DC power
inputs increase the reliability of the power supply and can be powered
via PoE for easier deployment. The AWK-4131 is compliant with the
essential sections of EN 50155, covering operating temperature, power
input voltage, surge, ESD and vibration. and with so many hardened
industrial-grade features, you can rest assured that the AWK-4121 will
provide stable and reliable wireless connectivity, even in the harshest
locations.
Industrial and Outdoor Rated Features for Critical
Environments
• IP68-rated metal housing and -40 to 75°C wide operating
temperature
• Anti-vibration M12 design and waterproof/dust-tight RJ45
connectors
• PoE and dual DC power inputs
Specifications for Industrial-grade Applications
• Long-distance wireless transmission over 10 km
• Integrated DI/DO for on-site monitoring and warnings
• Status LED indicators for on-site monitoring and diagnosis
Specifications
WLAN Interface
Standards:
IEEE 802.11a/b/g for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2 Personal and
Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
TX Transmit Power (for hardware revision 1.1):
802.11b:
Typ. 23±1.5 dBm @ 1 to 11 Mbps
802.11g:
Typ. 20±1.5 dBm @ 6 to 24 Mbps, Typ. 19±1.5 dBm @ 36 Mbps, Typ.
18±1.5 dBm @ 48 Mbps, Typ. 17±1.5 dBm @ 54 Mbps
802.11a:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps,
Typ. 15±1.5 dBm @ 54 Mbps
RX Sensitivity (for hardware revision 1.1):
802.11b:
-97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90
dBm @ 11 Mbps
802.11g:
-93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 12 Mbps, -88
dBm @ 18 Mbps, -84 dBm @ 24 Mbps, -80 dBm @ 36 Mbps, -76 dBm
@ 48 Mbps, -74 dBm @ 54 Mbps
info@moxa.com
w w w. m o x a . c o m
Industrial Wireless IEEE 802.11 Solutions > AWK-4121 Series
Introduction
6
6-19
Industrial Wireless IEEE 802.11 Solutions
Industrial Wireless IEEE 802.11 Solutions > AWK-4121 Series
Protocol Support
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP,
TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols: ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
Interface
Default Antennas: 2 dual-band omni-directional antennas, 5 dBi at 2.4
GHz, 2 dBi at 5 GHz, N-type (male)
Connector for External Antennas: N-type (female)
RJ45 Ports: 1, 10/100BaseT(X), auto negotiation speed, F/H duplex
mode, and auto MDI/MDI-X connection
Console Port: RS-232 (waterproof RJ45-type)
LED Indicators: PWR, FAULT, STATE, WLAN, LAN
Dimensions
Alarm Contact (digital output, M12 female connector): 1 relay output
with current carrying capacity of 1 A @ 24 VDC
Digital Inputs (M12 female connector): 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Physical Characteristics
Housing: Metal, IP68 protection
Weight: 1.5 kg
Dimensions: 224 x 147.7 x 64.5 mm (8.82 x 5.82 x 2.54 in)
Installation: Wall mounting (standard), DIN-Rail mounting (optional),
pole mounting (optional)
Environmental Limits
Operating Temperature: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 100% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48
VDC Power-over-Ethernet (IEEE 802.3af compliant)
*Compliant with EN 50155 on 24 VDC
Connector: M12 male connector with A-coding
Power Consumption:
• 12 to 48 VDC, 0.121 to 0.494 A
• 24 VDC, 0.3 A
Reverse Polarity Protection: Present
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
Hazardous Location: UL/cUL Class I Division 2, ATEX Zone 2
(Pending)
EMC: EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024
Radio: EN 300 328, EN 301 893, DSPR (Japan)
Rail Traffic: EN 50155, EN 50121-1/4
Note: Please check Moxa’s website for the most up-to-date certification status.
Reliability
MTBF (mean time between failures): 364,564 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Unit: mm (inch)
147.7 (5.82)
6
802.11a:
-90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 12 Mbps, -85
dBm @ 18 Mbps, -83 dBm @ 24 Mbps, -79 dBm @ 36 Mbps, -75 dBm
@ 48 Mbps, -74 dBm @ 54 Mbps
TX Transmit Power (for hardware revision 1.0):
802.11b:
Typ. 18±1.5 dBm @ 1 to 11 Mbps
802.11g:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps,
Typ. 15±1.5 dBm @ 54 Mbps
802.11a:
Typ. 16±1.5 dBm @ 6 to 24 Mbps, Typ. 14±1.5 dBm @ 36 to 48 Mbps,
Typ. 13±1.5 dBm @ 54 Mbps
RX Sensitivity (for hardware revision 1.0):
802.11b:
-92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84
dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82
dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm
@ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82
dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm
@ 48 Mbps, -70 dBm @ 54 Mbps
224.0 (8.82)
65.0 (2.56)
M12 VENT
Side Views
Top & Bottom Views
Front View
Rear View
Ordering Information
Available Models
AWK-4121-US-T: IEEE 802.11a/b/g IP68 wireless AP/bridge/client, US band, -40 to 75°C
operating temperature
AWK-4121-EU-T: IEEE 802.11a/b/g IP68 wireless AP/bridge/client, EU band, -40 to 75°C
operating temperature
AWK-4121-JP-T: IEEE 802.11a/b/g IP68 wireless AP/bridge/client, JP band, -40 to 75°C
operating temperature
Note: Please visit Moxa’s website for a complete list of optional wireless accessories and antennas
available for Moxa’s wireless products.
6-20
w w w. m o x a . c o m
info@moxa.com
Package Checklist
• AWK-4121 wireless AP/bridge/client
• 2 omni-directional antennas (5/2 dBi, N-type
male, 2.4/5 GHz)
• Wall mounting kit (includes 2 supports)
• Field-installable power plug
• Field-installable RJ45 plug
• Metal cap to cover M12-female connector
• Metal cap to cover RJ45 connector
• Transparent plastic sticks for field-installable
plugs
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
Industrial Wireless
AWK-3121 Series
Industrial IEEE 802.11a/b/g wireless AP/bridge/client
››IEEE 802.11a/b/g compliant
››QoS (WMM) and VLAN for efficient network traffic
››Supports long-distance data transfer and 100 ms Turbo Roaming
››Maximum security with WEP/WPA/WPA2/802.11X and powerful
filters
››Compliant with essential sections of EN 50155
››M12 anti-vibration connectors (AWK-3121-M12)
››-40 to 75°C operating temperature range (T models)
The AWK-3121 AP/bridge/client is ideal for industrial hard to wire
applications, keeping wireless costs under control, and integrating
with existing mobile equipment. The AWK-3121 is compliant with the
essential sections of EN 50155, covering operating temperature, power
input voltage, surge, ESD and vibration. Installation is easy, with either
DIN-Rail mounting or distribution boxes, and the DIN-Rail mounting
capability, wide operating temperature range, and IP30 housing with
LED indicators make the AWK-3121 a convenient yet reliable solution
for any industrial wireless application.
Specifications
WLAN Interface
Standards:
IEEE 802.11a/b/g for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseTX
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Advanced Security
•
•
•
•
•
64-bit and 128-bit WEP (Wired Equivalent Privacy)
Enable/disable SSID broadcasts
WPA/WPA2 (Wi-Fi Protected Access) and 802.11i support
IEEE802.1X/RADIUS support
Powerful filters for access control
Specifications for Industrial-grade Applications
•
•
•
•
Redundant DC power inputs
Long-distance data transmission over 10 km
Integrated DI/DO for on-site monitoring and warnings
Signal strength LEDs for easy deployment and antenna alignment
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and
Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
TX Transmit Power:
802.11b:
Typ. 23±1.5 dBm @ 1 to 11 Mbps
802.11g:
Typ. 20±1.5 dBm @ 6 to 24 Mbps, Typ. 19±1.5 dBm @ 36 Mbps, Typ.
18±1.5 dBm @ 48 Mbps, Typ. 17±1.5 dBm @ 54 Mbps
802.11a:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps,
Typ. 15±1.5 dBm @ 54 Mbps
RX Sensitivity:
802.11b:
-97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90
dBm @ 11 Mbps
802.11g:
-93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 12 Mbps, -88
dBm @ 18 Mbps, -84 dBm @ 24 Mbps, -80 dBm @ 36 Mbps, -76 dBm
@ 48 Mbps, -74 dBm @ 54 Mbps
802.11a:
-90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 12 Mbps, -85
dBm @ 18 Mbps, -83 dBm @ 24 Mbps, -79 dBm @ 36 Mbps, -75 dBm
@ 48 Mbps, -74 dBm @ 54 Mbps
info@moxa.com
w w w. m o x a . c o m
Industrial Wireless IEEE 802.11 Solutions > AWK-3121 Series
Introduction
6
6-21
Industrial Wireless IEEE 802.11 Solutions
Protocol Support
Physical Characteristics
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP,
TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
Housing: Metal, providing IP30 protection
Weight: 850 g
Dimensions: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Interface
Default Antennas*: 2 dual-band omni-directional antennas, 2 dBi,
RP-SMA (male)
Environmental Limits
*Only available with the AWK-3121 and AWK-3121-SSC models.
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48
VDC Power-over-Ethernet (IEEE 802.3af compliant)*
*Compliant with EN 50155 on 24 VDC
*PoE is only available for the AWK-3121 and AWK-3121-M12
Connector: 10-pin removable terminal block
Power Consumption: 12 to 48 VDC, 0.121 to 0.494 A
Reverse Polarity Protection: Present
*PoE is only available for the AWK-3121 and AWK-3121-M12
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
Hazardous Location: UL/cUL Class I Division 2, ATEX Zone 2 (for
AWK-3121 only)
EMC: EN 301 489-1/17; FCC Part 15, Subpart B; EN 55022/55024
Radio: EN 300 328, EN 301 893, DSPR (Japan)
Rail Traffic: EN 50155, EN 50121-1/4
Optical Fiber*
Note: Please check Moxa’s website for the most up-to-date certification status.
Reliability
100BaseFX
MTBF (mean time between failures):
AWK-3121: 392,209 hrs
AWK-3121-M12: 480,831 hrs
AWK-3121-SSC: 445,913 hrs
Single Mode
Wavelength
1310 nm
Max. TX
0 dBm
Min. TX
-5 dBm
RX Sensitivity
-34 dBm
Link Budget
29 dB
Typical Distance
40 kma
Saturation
-3 dBm
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/support/warranty.aspx
* Only available for AWK-3121-SSC models
Dimensions
Unit: mm (inch)
151.85 (5.98)
AWK-3121-SSC
134 (5.28)
AWK-3121
97 (3.82)
Industrial Wireless IEEE 802.11 Solutions > AWK-3121 Series
Alarm Contact: 1 relay output with current carrying capacity of 1 A @
24 VDC
Digital Inputs: 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
135 (5.31)
6
Operating Temperature:
Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Connector for External Antennas:
AWK-3121 and AWK-3121-SSC: RP-SMA (female)
AWK-3121-M12: QMA (female)
RJ45 Ports: 1, 10/100BaseT(X) auto negotiation speed, F/H duplex
mode, and auto MDI/MDI-X connection (AWK-3121 only)
Fiber Ports: 1, 100BaseFX port (SC connector, AWK-3121 only)
M12 Ports: 1, 10/100BaseT(X) auto negotiation speed, F/H duplex
mode, and auto MDI/MDI-X connection (AWK-3121-M12 only)
Console Port: RS-232 (RJ45-type)
LED Indicators: PWR1, PWR2, PoE*, FAULT, STATE, signal strength,
CLIENT MODE, BRIDGE MODE, WLAN, 10/100 (TP port), 100M (fiber
port), LAN (M12 port)
105 (4.13)
45.8 (1.80)
52.85 (2.08)
Front View
6-22
Front View
w w w. m o x a . c o m
Side View
info@moxa.com
Top View
Industrial Wireless
Dimensions
Unit: mm (inch)
AWK-3121-M12
97 (3.82)
134 (5.28)
135 (5.31)
151.85 (5.98)
128.1 (5.04)
6
37 (1.46)
45.8 (1.80)
52.85 (2.08)
105 (4.13)
119.3 (4.70)
Side View
Top View
Ordering Information
Available Models
Port Interface
PoE,
Model Name
Standard
Wide
Temperature
Temperature
(0 to 60°C)
(-40 to 75°C)
10/100BaseT(X)
Antenna Interface
100BaseFX
Single-Mode
RJ45
M12
RP-SMA
QMA
SC
Connector
AWK-3121
AWK-3121-US
P
–
P
–
–
P
–
AWK-3121-EU
P
–
P
–
–
P
–
AWK-3121-JP
P
–
P
–
–
P
–
AWK-3121-US-T
–
P
P
–
–
P
–
AWK-3121-EU-T
–
P
P
–
–
P
–
AWK-3121-JP-T
AWK-3121-M12
–
P
P
–
–
P
–
AWK-3121-M12-US
P
–
–
P
–
–
P
AWK-3121-M12-EU
P
–
–
P
–
–
P
AWK-3121-M12-JP
P
–
–
P
–
–
P
AWK-3121-M12-US-T
–
P
–
P
–
–
P
AWK-3121-M12-EU-T
–
P
–
P
–
–
P
AWK-3121-M12-JP-T
AWK-3121-SSC
–
P
–
P
–
–
P
AWK-3121-SSC-US
P
–
–
–
P
P
–
AWK-3121-SSC-EU
P
–
–
–
P
P
–
AWK-3121-SSC-JP
P
–
–
P
P
–
AWK-3121-SSC-US-T
–
P
–
–
P
P
–
AWK-3121-SSC-EU-T
–
P
–
–
P
P
–
AWK-3121-SSC-JP-T
–
P
–
–
P
P
–
Package Checklist
• AWK-3121 wireless AP/bridge/client
• Cable holder with one screw
• 2 plastic RJ45 protective caps for
console port
• 1 plastic protective cap for Fiber Port
(AWK-3121-SSC only)
• DIN-Rail kit
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
* 2 dual-band omni-directional antennas
(2 dBi, RP-SMA, 2.4/5 GHz)
Industrial Wireless IEEE 802.11 Solutions > AWK-3121 Series
Front View
Note:
US: USA band
EU: Europe band
JP: Japan band
Note: Please visit Moxa’s website for a complete list of optional wireless accessories and antennas available
for Moxa’s wireless products.
info@moxa.com
w w w. m o x a . c o m
6-23
Industrial Wireless IEEE 802.11 Solutions
AWK-1121/1127 Series
Industrial IEEE 802.11a/b/g wireless client
››IEEE 802.11a/b/g compliant
››Redundant 12 to 48 VDC power inputs
››100 ms client-based Turbo Roaming
››PoE 802.11af compliant (PoE model Only)
››Maximum security with WEP/WPA/WPA2/802.11X and powerful
filters
››-40 to 75°C operating temperature range (T models)
6
Industrial Wireless IEEE 802.11 Solutions > AWK-1121/1127 Series
6-24
AWK-1121
AWK-1127
Introduction
The AWK-1121/1127 WLAN client is ideal for industrial hard to wire
applications, keeping wireless costs under control, and integrating with
existing mobile equipment. The AWK-1121 enables WLAN connection
to Ethernet devices, while the AWK-1127 offers an additional RS232
port for serial device connectivity. The AWK-1121/1127 is rated to
operate at temperatures ranging from 0 to 60°C for standard models
and -40 to 75°C for wide temperature models, and is rugged enough
for any harsh industrial environment. Installation is easy, with either
DIN-Rail mounting or distribution boxes, and the DIN-Rail mounting
capability, wide operating temperature range, and IP30 housing with
LED indicators make the AWK-1121/1127 a convenient yet reliable
solution for any industrial wireless application.
Advanced Security
•
•
•
•
•
64-bit and 128-bit WEP (Wired Equivalent Privacy)
WPA/WPA2 (Wi-Fi Protected Access) and 802.11i support
Enable/disable SSID broadcasts
IEEE802.1X/RADIUS support
Powerful packet filters for access control
Specifications for Industrial-grade Applications
•
•
•
•
Redundant DC power inputs
Power over Ethernet support
IP30 compact size aluminum housing
Signal strength LEDs for easy deployment and antenna alignment
Specifications
WLAN Interface
Standards:
IEEE 802.11a/b/g for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseTX
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q VLAN
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
w w w. m o x a . c o m
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security:
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and
Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
TX Transmit Power:
802.11b:
Typ. 18±1.5 dBm @ 1 to 11 Mbps
802.11g:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 17±1.5 dBm @ 36 Mbps,
Typ. 16±1.5 dBm @ 48 Mbps, Typ. 16±1.5 dBm @ 54 Mbps
802.11a:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 Mbps,
Typ. 15±1.5 dBm @ 48 Mbps, Typ. 14±1.5 dBm @ 54 Mbps
RX Sensitivity:
802.11b:
-97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps,
-90 dBm @ 11 Mbps
info@moxa.com
Industrial Wireless
802.11g:
-88 dBm @ 6 to 24 Mbps, -85 dBm @ 36 Mbps, -75 dBm @ 48 Mbps,
-70 dBm @ 54 Mbps
802.11a:
-88 dBm @ 6 to 24 Mbps, -85 dBm @ 36 Mbps, -75 dBm @ 48 Mbps,
-70 dBm @ 54 Mbps
Physical Characteristics
Protocol Support
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP,
TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
Interface
Default Antennas:
1 RP-SMA (male), 2 dual-band omni-directional antenna, 2 dBi,
RP-SMA (male)
Connector for External Antennas:
RP-SMA (female)
RJ45 Ports: 1, 10/100BaseT(X) auto negotiation speed, F/H duplex
mode, and auto MDI/MDI-X connection
Serial Port: 1, RS232/422/485, DB9 male connector (AWK-1127 only)
Console Port: RS-232 (RJ45-type)
LED Indicators: PWR, FAULT, STATE, SIGNAL, WLAN, LAN
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
Serial Data Log: 256 KB
Environmental Limits
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48
VDC Power-over-Ethernet (IEEE 802.3af compliant)*
*PoE is only available for the AWK-1121-PoE and AWK-1127-PoE
Connector: 4-pin removable terminal block
Power Consumption: 12 to 48 VDC, 0.16 to 0.55 A
Reverse Polarity Protection: Present
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: EN 301 489-1/17, FCC Part 15 Subpart B Class B, EN
55022/55024
Radio: EN 300 328, EN 301 893, DSPR (Japan)
Note: Please check Moxa’s website for the most up-to-date certification status.
Reliability
MTBF (mean time between failures):
392,209 hrs
Serial Signals (AWK-1127 Only)
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/support/warranty.aspx
RS-232 : DSR, RTS, GND, TxD, RxD, DCD, CTS, DTR
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire): Data+, Data- and GND
RS-485 (4-wire): Tx+, Rx+, Tx-, Rx+ and GND
Dimensions
Unit: mm (inch)
115 (4,53)
AWK-1121 AWK-1127
50,3 (1,98)
50,3 (1,98)
Front Views
6
Industrial Wireless IEEE 802.11 Solutions > AWK-1121/1127 Series
Serial Communication Parameters (AWK-1127 Only)
Housing: Metal, providing IP30 protection
Weight: 400 g
Dimensions: 50 x 115 x 70 mm (1.97 x 4.53 x 2.76 in)
Installation: DIN-Rail mounting, wall mounting (with optional kit)
70 (2,76)
78,8 (3,10)
Side View
Rear Views
Top & Bottom Views
(AWK-1121)
info@moxa.com
w w w. m o x a . c o m
Top & Bottom Views
(AWK-1127)
6-25
Industrial Wireless IEEE 802.11 Solutions
Ordering Information
Available Models
Package Checklist
Port Interface
Standard
Wide
Temperature
Temperature
(0 to 60°C)
(-40 to 75°C)
AWK-1121-US
P
–
P
–
–
AWK-1121-EU
P
–
P
–
–
AWK-1121-JP
P
–
P
–
–
AWK-1121-US-T
–
P
P
–
–
AWK-1121-EU-T
–
P
P
–
–
AWK-1121-JP-T
–
P
P
–
–
AWK-1121-PoE-EU
P
–
P
–
P
AWK-1121-PoE-US
P
–
P
–
P
AWK-1121-PoE-JP
P
–
P
–
P
AWK-1121-PoE-EU-T
–
P
P
–
P
AWK-1121-PoE-US-T
–
P
P
–
P
AWK-1121-PoE-JP-T
AWK-1127
–
P
P
–
P
AWK-1127-EU
P
–
P
P
–
AWK-1127-US
P
–
P
P
–
AWK-1127-JP
P
P
P
–
AWK-1127-EU-T
–
P
P
P
–
AWK-1127-US-T
–
P
P
P
–
AWK-1127-JP-T
–
P
P
P
–
AWK-1127-PoE-EU
P
–
P
P
P
AWK-1127-PoE-US
P
–
P
P
P
AWK-1127-PoE-JP
P
–
P
P
P
AWK-1127-PoE-EU-T
–
P
P
P
P
AWK-1127-PoE-US-T
–
P
P
P
P
AWK-1127-PoE-JP-T
–
P
P
P
P
Model Name
10/100BaseT(X)
RJ45
RS-
PoE Support
232/422/485
AWK-1121
6
Industrial Wireless IEEE 802.11 Solutions > AWK-1121/1127 Series
6-26
Note:
US: USA band
EU: Europe band
JP: Japan band
Note: Please visit Moxa’s website for a complete list of optional wireless accessories and antennas available for Moxa’s
wireless products.
w w w. m o x a . c o m
info@moxa.com
•
•
•
•
•
•
•
AWK-1121/1127 Industrial Client
2dBi dual band antenna
Console protective cap
Resistive Terminator
Quick Installation Guide (printed)
Document and Software CD
Warranty card
Industrial Wireless
WAC-1001
Industrial wireless access controller
››Redundant 12 to 48 VDC power inputs
››Less than 50 ms controller controller empowered Turbo Roaming
››Supported models: AWK-RTG series
››Compliant with essential sections of EN 50155
››IEEE 802.11i-compliant wireless security
››DIN-Rail or wall mounting for onsite installation
››-40 to 75°C operating temperature range (T model)
The goal of zero-latency-roaming is to create networks that maintain
communications seamlessly as clients move from one access point
to another. For this, as a part of the AWK-RTG series, Moxa has
introduced the WAC-1001 with Turbo Roaming technology, a wireless
access controller that can achieve less than 50ms roaming. This
advanced roaming capability securely hands off clients at speeds so
high that wireless clients may roam between APs almost seamlessly,
with virtually no interruption in connectivity. Moreover, the WAC1001 is suitable for use even in extremely demanding environments,
meeting the essential sections of EN 50155 that cover operating
temperature, power input voltage, surge, ESD and vibration.
Maximum Availability
• Less-than-50ms Turbo Roaming
• Configuration back-up
• Dual redundant DC power inputs
Advanced Security
• IEEE802.1X/RADIUS supported
• WPA/WPA2/802.11i supported
• Integrated DI/DO for on-site monitoring and warnings
Specifications
WLAN Interface
Standards:
IEEE 802.11i for Wireless Security
IEEE 802.3u for 10/100BaseT(X)
IEEE 802.3af for Power-over-Ethernet
Security: WPA /WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS,
TKIP, and AES)
Interface
LAN Port: 10/100BaseT(X), auto negotiation speed (RJ45-type)
Console: RS-232 (RJ45-type)
LED Indicators: PWR1, PWR2, PoE, FAULT, STATE, 10M, 100M
Alarm Contact: 1 relay output with current carrying capacity of 1 A @
24 VDC
Digital Inputs: 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Physical Characteristics
Housing: Metal, providing IP30 protection
Weight: 700 g
Dimensions: 52.85 x 135 x 105 mm (2.08 x 5.31 x 4.13 in)
Installation: DIN-Rail mounting, wall mounting
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Industrial Wireless IEEE 802.11 Solutions > WAC-1001
Introduction
6
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48
VDC Power-over-Ethernet (IEEE 802.3af compliant)
*Compliant with EN 50155 on 24 VDC
Connector: 10-pin removable terminal block
Power Consumption:
• 12 to 48 VDC, 0.121 to 0.494 A
• 24 VDC, 0.3 A
Reverse Polarity Protection: Present
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: FCC Part 15 Subpart B Class A, EN 55022/55024
Rail Traffic: EN 50155, EN 50121-1/4
Note: Please check Moxa’s website for the most up-to-date certification status.
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
info@moxa.com
w w w. m o x a . c o m
6-27
Industrial Wireless IEEE 802.11 Solutions
Dimensions
Industrial Wireless IEEE 802.11 Solutions > WAC-1001
6-28
45.8 (1.80)
88 (3.46)
52.85 (2.08)
105 (4.13)
Front View
135 (5.31)
151.85 (5.98)
40 (1.57)
6
134 (5.28)
Unit: mm (inch)
Side View
Rear View
Top & Bottom Views
Ordering Information
Available Models
WAC-1001: Industrial wireless access controller, 0 to 60°C operating temperature
WAC-1001-T: Industrial wireless access controller, -40 to 75°C operating temperature
w w w. m o x a . c o m
info@moxa.com
Package Checklist
•
•
•
•
•
•
•
•
WAC-1001 wireless controller
Wall mounting kit
Cable holder with one screw
2 protective caps
DIN-Rail kit
Documentation and software CD
Quick installation guide (printed)
Warranty card
Industrial Wireless
Wireless Antennas and Accessories
Overview
Moxa’s antennas are specifically designed for long range applications. Additional aftermarket antennas are used to extend the wireless range. Selecting
the right antenna system can greatly enhance transmission coverage and power.
This page briefly explains the differences between the two basic types of antennas: omni-directional and directional. The two types are categorized by
the direction in which they beam radio signals.
Omni-directional
Directional
Omni-directional antennas are designed to radiate signals equally in all
directions. They have very limited vertical spread, which determines
the antenna gain. Antennas of this type are typically located in the
center of open spaces or larger offices to provide even coverage to all
clients. Omni-directional antennas are the right choice for applications
that require constant location changes.
Directional antennas provide a more focused signal than omnidirectional antennas. Signals are typically transmitted in an ovalshaped pattern with a beam width of only a few degrees. With higher
gain, directional antennas can also be used outdoors to extend
point-to-point links over a longer transmission distance, or to form a
point-to-multipoint network.
Types of Directional Antennas
Types of Omni-directional Antennas
H-plane
Fiberglass Antenna
E-plane
H-plane
Panel Antenna
Antenna Connectors
Before you purchase an antenna for your wireless device, you should
check the type of antenna connector that your device uses. You will
need to buy an antenna with a matching connector. There are several
types of antenna connectors, including MCX, TNC, N-type, SMA, and
N-type (male)
N-type (female)
RP-SMA (female)
RP-SMA (RP stands for “reverse polarity” or “reverse ping”). On
WLAN devices, the most commonly used antenna connectors for IEEE
802.11 applications are RP-SMA and N-type. Make sure to check the
connector type of before you buy an antenna.
RP-SMA (male)
SMA (female)
SMA (male)
Choosing the Right Antenna for Your Project
If you are planning to extend the range or widen the coverage of your wireless connection, then you may need to use external high-gain antennas for
your access points. In addition to the antenna type and gain, there are a few other specifications that you should consider.
Frequency Range
Equivalent Isotropically Radiated Power (EIRP)
The most important parameter of an antenna is its working frequency.
If you use a 2.4G antenna for IEEE 802.11a applications, you will find
that the signal is too weak and the data rate drops down to a very
low level. Be sure to use the right antenna for your planned working
frequency.
The EIRP value is defined as the power transmitted by a theoretical
isotropic antenna that distributes power evenly in all directions and
emits and produces the peak power density observed in the direction
of maximum antenna gain. Local governments control the EIRP of
radio devices under radiation/telecommunication regulations. You
must ensure that your wireless system does not exceed legal EIRP
values. The EIRP value is also used to estimate the service area of
the transmitter and to coordinate transmitters on the same frequency
so that their coverage areas do not overlap. EIRP is calculated by
measuring the power of the transmitter, losses in transmission lines
and connectors, and the gain of the antenna. The unit used for EIRP
and transmitter power is dBm, cable loss is measured in dB, and
antenna gain is expressed in dBi, relative to a (theoretical) isotropic
reference antenna.
Half-power Beam Width (HPBW)
This parameter is measured from the antenna’s radiation pattern, and
refers to the beam width at which the antenna’s radiation drops to half
of its peak value. It also refers to the antenna’s effective coverage area.
Once you get outside the half-power beam width, the signal typically
drops off very quickly. A very high-gain antenna has a very narrowangled half-power beam width, which makes the directionality high as
well.
Antenna Polarity
Polarization refers to the direction in which the electromagnetic field
lines point as energy radiates away from the antenna. The simplest and
most common type is linear polarization. When power is sent from
transmitter to receiver, only that portion of the beam with the same
polarization can be received. An improper antenna installation may
decrease performance.
Industrial Wireless IEEE 802.11 Solutions > Wireless Antennas and Accessories
E-plane
6
Online WLAN Distance Calculator
Moxa’s wireless antennas improve effective wireless reach and overall
performance. Use Moxa’s Online WLAN distance calculator to choose
the perfect antenna for the specific requirements of your project.
The user-friendly Moxa WLAN distance calculator can be found at
http://www.moxa.com/Event/IW/2010/Moxa_
WLAN_Calculator_V12
info@moxa.com
w w w. m o x a . c o m
6-29
Industrial Wireless IEEE 802.11 Solutions
Wireless Antenna Selection Guide
IEEE 802.11b/g 2.4 GHz Wireless Antennas
ANT-WSB-AHRM-05-1.5m
6
Frequency Range
Antenna Type
Typical Antenna Gain
2.4 to 2.5 GHz
l/4 Dipole
5 dBi
Description
2.4 GHz, omni-directional/
dipole antenna, 5 dBi
Industrial Wireless IEEE 802.11 Solutions > Wireless Antenna Selection Guide
Impedance
Polarization
HPBW/Horizontal
HPBW/Vertical
V.S.W.R.
Power Handling
Connector(s)
Operating
Temperature
IP rating
Antenna Profile
Weight
Related Products
ANT-WSB-ANF-09
ANT-WSB-PNF-12
ANT-WSB-PNF-18
ANT-WSB5-ANF-12
ANT-WSB5-PNF-18
Directional, Panel
18 dBi
Directional, Panel
12 dBi
Directional, Panel
18 dBi
2.4 GHz, panel
antenna, 12 dBi,
N-type (female)
2.4 GHz, panel
antenna, 18 dBi,
N-type (female)
5 GHz, omni-directional 5 GHz, panel
antenna, 12 dBi,
antenna, 18 dBi,
N-type (female)
N-type (female)
50 ± 5 ohms
Vertical
360°
–
2.0
–
RP-SMA (male)
Omni-directional
9 dBi
2.4GHz,
omni-directional
antenna, 9 dBi,
N-type (female)
50 ± 5 ohms
Linear
360°
10°
1 : 1.3 Max.
15 W Max.
N-type (female)
5.1 to 5.9 GHz
Omni-directional
12 dBi
50 ± 5 ohms
Linear
50°
30°
1 : 1.5 Max.
10 W Max.
N-type (female)
50 ± 5 ohms
Linear
30°
20°
1 : 1.5 Max.
15 W Max.
N-type (female)
50 ± 5 ohms
Linear
360°
6°
1 : 1.3 Max.
10 W Max.
N-type (female)
50 ± 5 ohms
Linear
10°
10°
1 : 1.5 Max.
10 W Max.
N-type (female)
-40 to 80°C
-40 to 80°C
-40 to 80°C
-40 to 80°C
-40 to 80°C
-40 to 80°C
–
–
300 g
AWK-1121/1127,
AWK-3121, AWK-3121-SSC,
AWK-3131, AWK-5222,
AWK-5232, NPort
W2150/2250 Plus, NPort
W2004
IP65
420 mm length
430 g
IP65
215 x 90 x 30 mm
560 g
IP65
270 x 205 x 15 mm
310 g
IP65
420 mm length
430 g
IP65
270 x 205 x 15 mm
990 g
AWK-1121/1127, AWK-3121, AWK-3131, AWK-4121, AWK-4131, AWK-5222, AWK-5232, AWK-6222, AWK-6232,
NPort W2150/2250 Plus, NPort W2004
IEEE 802.11a/b/g 2.4/5 GHz Dual-band Antennas
ANT-WDB-ANM-0502
Frequency Range
Antenna Type
Typical Antenna Gain
Description
Impedance
Polarization
HPBW/Horizontal
HPBW/Vertical
V.S.W.R.
Power Handling
Connector(s)
Operating
Temperature
IP rating
Antenna Profile
Weight
Related Products
6-30
IEEE 802.11a 5 GHz Wireless Antennas
ANT-WDB-ANM-0407
ANT-WDB-ANF-0407
ANT-WDB-ANM-0609
ANT-WDB-ANF-0609
ANT-WDB-PNF-1518
2.4 to 2.5 / 5.1 to 5.9 GHz
Omni-directional
Omni-directional
2/5 dBi
4/7 dBi
2.4/5 GHz, dual-band 2.4/5 GHz, dual-band
omni-directional
omni-directional
antenna, 2/5 dBi,
antenna, 4/7 dBi,
N-type (male)
N-type (male)
50 ± 5 ohms
50 ± 5 ohms
Linear
Linear
360°
360°
65°
10/8°
1 : 2.0 Max.
1 : 1.5 Max.
2 W Max.
10 W Max.
N-type (male)
N-type (male)
Omni-directional
4/7 dBi
2.4/5 GHz, dual-band
omni-directional
antenna, 4/7 dBi,
N-type (female)
50 ± 5 ohms
Linear
360°
10/8°
1 : 1.5 Max.
10 W Max.
N-type (female)
Omni-directional
6/9 dBi
2.4/5 GHz, dual-band
omni-directional
antenna, 6/9 dBi,
N-type (male)
50 ± 5 ohms
Linear
360°
10/8°
1 : 1.5 Max.
10 W Max.
N-type (male)
Omni-directional
6/9 dBi
2.4/5 GHz, dual-band
omni-directional
antenna, 6/9 dBi,
N-type (female)
50 ± 5 ohms
Linear
360°
10/8°
1 : 1.5 Max.
10 W Max.
N-type (female)
Directional, Panel
15/18 dBi
2.4/5 GHz, dual-band
panel antenna,
15/18 dBi,
N-type (female)
50 ± 5 ohms
Linear
50/10°
30/10°
1 : 1.5 Max.
20 W Max.
N-type (female)
-40 to 80°C
-40 to 80°C
-40 to 80°C
-40 to 80°C
-40 to 80°C
-40 to 80°C
IP67
220 mm length
72 g
IP65
220 mm length
115g
IP65
260 mm length
155 g
AWK-1121/1127,
AWK-3121,
AWK-3131,
AWK-4121,
AWK-4131,
AWK-5222,
AWK-5232,
AWK-6222,
AWK-6232, NPort
W2150/2250 Plus,
NPort W2004
IP65
632 mm length
238 g
IP65
660 mm length
286 g
IP65
270 x 205 x 15 mm
1020±10 g
AWK-4121,
AWK-4131,
AWK-6222,
AWK-6232
AWK-1121/1127, AWK-3121, AWK-3131,
AWK-4121, AWK-4131, AWK-5222,
AWK-5232, AWK-6222, AWK-6232, NPort
W2150/2250 Plus, NPort W2004
AWK-4121, AWK-4131, AWK-6222,
AWK-6232
w w w. m o x a . c o m
info@moxa.com
Industrial Wireless
Wireless Accessories Selection Guide
Cables
CRF-N0117SA3M
CRF-N0429N3M
A-CRFNMNMLL4-300
A-CRFNMNMLL4-600
A-CRFNMNMLL4-900
A-CRFA-CRFA-CRFA-CRFRMNM-L1-300 RMNM-L1-600 RMNM-L1-900 RFRM-S1-060
A-CRFQMAMNM-R2-50
LMR-400 LITE
cable, N-type
(male) to
N-type (male),
6m
LMR-400 Lite
LMR-400 LITE
cable, N-type
(male) to
N-type (male),
9m
LMR-400 Lite
LMR-195 Lite
cable, N-type
(male) to RP
SMA (male),
3m
LMR-195 Lite
RG316
RG316
QMA male to
N-type male
QMA male to
RP-SMA female
0.5 m
2.54 mm
0.5 m
2.54 mm
Description
CFD200 cable,
N-type (male) to
RP SMA (male),
3m
Cable Type
CFD200
LMR-400 Lite
CFD400 cable,
cable, N-type
N-type (male) to
(male) to
N-type (male),
N-type (male),
3m
3m
CFD400
LMR-400Lite
Connector Type
N-type male to
RP SMA male
N-type male to
N-type male
3m
5 mm
3m
10.3 mm
S141
RP-SMA male
N-type male to N-type male to N-type male to N-type male to N-type male to N-type male to
to RP-SMA
N-type male
N-type male
N-type male
RP SMA male RP SMA male RP SMA male
female
3m
6m
9m
3m
6m
9m
0.6 m
10.29 mm
10.29 mm
10.29 mm
4.95 mm
4.95 mm
4.95 mm
5 mm
12.7 mm
24.5 mm
25.4 mm
25.4 mm
25.4 mm
22.2@2.5 GHz
22.2@2.5 GHz 22.2@2.5 GHz 22.2@2.5 GHz
55.4@2.5 GHz
86.5@5.8 GHz
35.5@5.8 GHz
35.5@5.8 GHz 35.5@5.8 GHz 35.5@5.8 GHz
AWK-1121/1127,
AWK-3121,
AWK-3121-SSC,
Related Products
AWK-4121, AWK-4131, AWK-6222, AWK-6232-M12
AWK-3131,
AWK-5222,
AWK-5232
LMR-195 Lite
cable, N-type
(male) to RP
SMA (male),
9m
LMR-195 Lite
S141 cable,
RG316 cable, QMA RG316 cable,
RP-SMA (male)
(male) to N-type
QMA (male) to
to RP-SMA
(male)
RP-SMA (female)
(female), 0.6 m
12.7 mm
12.7 mm
12.7 mm
12.7 mm
15 mm
15 mm
62.4@2.5 GHz
98.1@5.8 GHz
62.4@2.5 GHz
98.1@5.8 GHz
62.4@2.5 GHz
98.1@5.8 GHz
75.4@3 GHz
98.4@5 GHz
206@2.4 GHz
345@6 GHz
206@2.4 GHz
345@6 GHz
AWK-1121/1127, AWK-3121, AWK-3121-SSC, AWK-3131,
AWK-5222, AWK-5232
AWK-3121-M12, AWK-3131-M12,
AWK-5222-M12, AWK-5232-M12
Termination Resistors
Description
A-TRM-50-NM
Termination resistor, 50 ohms, N-type (male)
Related Products
AWK-4121, AWK-4131, AWK-6222, AWK-6232
A-TRM-50-RM
Termination resistor, 50 ohms, RP-SMA (male)
AWK-1121/1127, AWK-3121, AWK-3121-SSC, AWK-3131, AWK-5222,
AWK-5232
Power Amplifiers
Description
Signal Type
Connector Type
Power Output
Power Consumption
Power Cable
Dimensions
Related Accessories
Related Products
A-WPA-2410gM-IDU
Wireless power amplifier
2.4 GHz band antenna (included)
RP-SMA connector
1W
12 VDC
Power plug to power jack cable (included)
92 x 60 x 31 mm
• N-type male to RP-SMA male cable
• RP-SMA male to RP-SMA female cable
AWK-1121/1127, AWK-3121, AWK-3121-SSC, AWK-3131, AWK-5222,
AWK-5232
Arrestors
Frequency
Connector Type
Related Products
A-SA-NMNF-01
0-6 GHz
N-type female to N-type male
AWK-1121/1127, AWK-3121,
AWK-3131, AWK-4121, AWK-4131,
AWK-5222, AWK-6222
A-WPA-5410aM-IDU
Wireless power amplifier
5 GHz band antenna (included)
RP-SMA connector
1W
12 VDC
Power plug to power jack cable (included)
92 x 60 x 31 mm
• N-type male to RP-SMA male cable
• RP-SMA male to RP-SMA female cable
AWK-1121/1127, AWK-3121, AWK-3121-SSC, AWK-3131, AWK-5222,
AWK-5232
6
Industrial Wireless IEEE 802.11 Solutions > Wireless Accessories Selection Guide
Cable Length
Outer Dimension
Min. Bend
Radius
Attenuation
(dB/100 m)
LMR-195 Lite
cable, N-type
(male) to RP
SMA (male),
6m
LMR-195 Lite
A-CRFRFQMAM-R2-50
Adaptors
A-ADP-RJ458P-DB9F-ABC01
Description
RJ45-to-DB9 adaptor for the ABC-01
Related Products
All AWK series
A-ADP-QMAM-RF
QMA(male) to RP-SMA (female)
adaptor for antenna
AWK-3121-M12, AWK-3131-M12,
AWK-5222-M12, AWK-5232-M12
Note: Actual product may vary in physical appearance but will not effect its functionality.
info@moxa.com
w w w. m o x a . c o m
6-31
This page intentionally left blank.

Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project