phantom powered microphones
PHANTOM POWERED
MICROPHONES
www.iSEMcon.com
Page 9
EMM-13D082 PHANTOM series
1/4" front - 1/2" body Measurement microphone,
phantom powered





3% distortion vs Sound Pressure Level
super compact design
Mini XLR connector
Human readable Calibration filrs
included (ASCII data/ Text file)
Printed frequency response data
on-axis and diffuse-field
calibration data included
at no additional cost
Features:
 Phantom power 12 / 24 / 48Volts
 Linear frequency response
 10...20000 Hz (calibration chart
 Omnidirectional




Large Dynamic Range
Stainless steel housing
Polyurethane and calibration file
included)sealed
ESD and Surge-Voltage Protection
Included Accessories:
5m MiniXLR to XLR Cable
Page 10
Data file format stored in #####.cal
Human readable ASCII file:
www.iSEMcon.com freefield
Sensitivity
30,88 mV/Pa @1kHz
10,00
-0,02
10,40
0,03
10,82
0,06
11,26
0,10
11,71
0,14
12,18
0,17
……
……………
0,94
19945,31
0,94
19968,75
0,93
19992,19
0,93
^ frequency (Hz) ^amplitude response (dB)
iSEMcon GmbH
Excerpt from cal-sheet.
Ordering information : EMM-13D082-series
Order No.
Name
Sensitivity, typ.
mV @ 94dBspl
Signal
Max. SPL,
polarity
3% distortion limit
140011
140010
EMM-13D082/H-P48/RM
EMM-13D082/S-P48/RM
6
30
Non-inverting
inverting
140 (145)
125 (130)
SPECIFICATIONS EMM-13D082/#-P48/RM
PERFORMANCE
Frequency Response characteristic
Polarization Voltage
Nominal Sensitivity @1kHz
Microphone Polarity
Frequency Response calibrated
Free-Field
Prepolarized
See order info
See order info
Values for: 24V Phantom Power; 23°Celsius
ENVIRONMENTAL
Operating Temperature
range
Storage Temperature
Range
Operating Humidity Range
Axial Vibration Sensitivity
Phase Match 100-5000 Hz
Inherent Noise100-10000 Hz
Inherent Noise 1/3 Oct.
10…20.000
Hz
50…8000 Hz
20…12000
Hz
10…18000
Hz
± 5°
<30dB typ.
<15dB typ.
Dynamic Range (3% distortion) typ.
See order info
CONFORMITY
IEC 61000-6-1
<100 Ω
12…52Vdc
SPECIAL FUNCTIONALITY
ESD and Surge Voltage
protection
Frequency Response
± 1dB
± 2dB
± 3dB
ELECTRICAL
Output Impedance
Phantom Power (requires XLRmale
to BNC connector adapter)
www.iSEMcon.com
PHYSICAL
Housing Material
-10…+55°
-20…+70°
0…90%r.H.
~ 50dB
Stainless Steel
Sealing
Polyurethane/Epoxy
Output Connector
Dimensions
Weight
Ø ¼“(7mm) x 3 ¼““(82mm)
SMB coaxial socket
0.8 oz (25g)
Page 11
EMX-7150 PHANTOM series
ACTUAL SIZE
TYPICAL APPLICATIONS
Sound-power and sound-field analysis
Industrial Acoustics
Room acoustics analysis
Sound reinforcement
Real time analyzers
The EMX-7150 is a ¼” microphone made from
stainless steel and using state of the art water tight
Neutrik*3 connectors has a very accurate frequency
response combined with the capability to measure
high sound pressure levels up to 145dBspl. It is low
impedance measurement microphone that can be
operated from 12…52 V Phantom Power which is
available on most professional microphone
preamplifiers and professional computer interfaces.
With its mechanically robust design it is well suited
for harsh environment use such as open air sound
reinforcement measurements. Its class 1 frequency
response (NOTE: NOT A CLASS 1 MICROPHONE)*1
makes it predestined for Room acoustics analysis
including recording studios and home theaters. It
can normally be used without the included freefield
calibration data file for compensation. In this case
take the individual calibration data as proof of its
superb performance.
Small windshield included
High SPL capability
freefield calibration data
diffusefield calibration data*2
1/4" acoustical port
Long microphone body
reduces early reflection effects
Our super protection windshield SWS -7 is
recommended for open air use when limited
amounts of spraying water as well as trickling water
impact the microphone.
FEATURES
Frequency range 10Hz…20kHz
Sensitivity 6mV/Pa typ.
Dynamic range ~30… >140dBspl
3% distortion limits 146dBspl typ.
Calibration chart and calibration data files
included on CD
IEC 61672 class 1 frequency response
Dimensions: acoustic port dia. ¼” (7mm)
Microphone body 0.75” (19mm)
Overall length 6” (152mm)
Weight 0.3oz (75 grams)
All stainless steel body
Factory replaceable electronics &
capsule
O-Ring seal
Water tight connection
*3
when using Neutrik NC-3FX-HD
connector
*1: Class 1 Freq.Response under limited conditions (23°C ± 3°C, 1013 mbar ±
30mbar)
*2: approximated by 90deg incidence response
*3: The corporate names and names of the products stated in this brochure are
trademarks or registered trademarks of the respective companies.
Page 12
iSEMcon GmbH
SPECIFICATIONS
PERFORMANCE
Frequency Response characteristic
Polarization Voltage
Nominal Sensitivity @1kHz
Microphone Polarity
Frequency Response calibrated
Frequency Response IEC61672
*1
Inherent Noise100-10000 Hz
Inherent Noise 1/3 Oct.
Max. SPL. (3% distortion limit)
Max. SPL. (3% distortion) typ.
ENVIRONMENTAL
Operating Temperature range
Storage Temperature Range
Operating Humidity Range
Axial Vibration Sensitivity
Values for 23° Celsius and 48V Phantom Power
ELECTRICAL
Output Impedance
Free-Field
Prepolarized
6mV/Pa
Non-Inverting
10…20.000 Hz
class 1
<30dB typ.
<15dB typ.
> 140dBspl
146 dBspl
Phantom Power
PHYSICAL
Housing Material
< 200 Ω
12…52Vdc
Stainless Steel
Sealing
O-ring/Polyurethane/Epoxy
Output Connector
XLR male
Dimensions
Ø ¼“(7mm) x 6“(152mm)
Weight
0.3 oz (75g)
CONFORMITY
IEC 61000-6-1;
-10…+55°
-20…+70°
0…90%r.H.
~ 50dB
THD , ref 1kHz
IEC 61010-1
SPECIAL FUNCTIONALITY
Voltage surge protection
ü
CALIBRATION DATA FILE ORMAT
Human readable ASCII file:
www.iSEMcon.com freefield
Sensitivity
5.88 mV/Pa @1kHz
10.00
-0.02
11.26
0.10
……….
19992.19
0.93
^ frequency (Hz) ^amplitude response (dB)
FREQUENCY RESPONSE
Ordering information :
www.iSEMcon.com
Order
No.
Name
800060
EMX-7150-CF1
800070
EMX-7150-CF2
800080
EMX-7150-CF/MP
800081
EMX-7150-CF/MT
800082
150010
EMX-7150-CF/MQ
EMX-7150
EMX-7150, clamp,USB
Stick,cal Adapter
2x EMX-7150, shockmount,USB Stick,cal Adapter
2x EMX-7150, clamps,USB
Stick,cal Adapter
3x EMX-7150, clamps,USB
Stick,cal Adapter
4x EMX-7150, clamps,USB
Stick,cal Adapter
EMX-7150, clamp,
Page 13
SUPPLIED ACCESSORIES
Small windshield
Universal holding clamp
OPTIONAL ACCESSORIES
SWS-7 windshield
Metal grid guard covered from
impregnated foam.
Protects
microphone port from
spraying water .
Slide on
retainer with O-ring
prevents from trickle
water
MB-230-BOX
O-Ring seal
Water protection
Dust protection
Dimensions [mm]
210 x 167 x 90
SOUND CALIBRATOR SC-1 94dBspl and
110dBspl switchable. Standard and custom size adapters. Calibration data included (includes individual
pressure chart)
POLAR PATTERNS, typical
Page 14
iSEMcon GmbH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising