D154-TS20R Spec Sheet.ai
D154-TS20R LUMINAIRE
D154-T S20
HID
U.3.10.16
Description
This contemporary styled D154-TS20R Series combines a cast aluminum housing, a spun
aluminum shade and segmented reflector to create an efficient luminaire with Type lll
(HR3) or V (HR5) light distribution. The louvers emit a low level glow. Some of the most
popular bracket models for use with this fixture are shown below, however there are
others available in the "Brackets & Wall Luminaires" section of this catalog.
Electrical
• High power factor ballast (HPF), core and coil type, pre-wired and tested
• Easy ballast pod access
• 4KV pulse rated porcelain socket
• Suitable for wet location
PROJECT:
TYPE:
ETL listed, suitable for wet locations.
Installation
The luminaire will mount to the bracket as shown on the reverse page. Post top luminaire
brackets will mount to a 3" OD post or tenon with (6) 5/16" stainless steel set screws. Wall
bracket models have four 3/8" holes for mounting (wall mount hardware is not included).
Optical Systems
(HR3-GL) - Type lll segmented reflector with a clear flat tempered glass.
(HR5-GL) - Type V segmented reflector with a clear flat tempered glass.
Lens
Clear smooth flat tempered glass (GL)
Finish
Premium quality thermoset polyester powdercoat
for a durable finish in the following:
BLK - Satin Black
CLB - Classic Bronze
GBZ - Gloss Textured Bronze
GRN - Green
GTB - Gloss Textured Black
TBK - Textured Black
TGR - Gloss Textured Green
With unlit rings
(UL)
With lit rings
(standard)
19"
36"
PT01/D154-TS20R
16"
EPA: 1.23
20"
Ordering Information:
Unlit option
for full cutoff
Model
D154-TS20R
Optical
System
Lens
HR3
HR5
UL
GL
Light
Source
Voltage
70,100,150MH
70,100,150HPS
120v
208v
240v
277v
See next page for more complete ordering options
800.364.0098
•
Fax: 281.997.5441
•
www.amerlux.com
Amerlux reserves the right to change details that do not affect overall function and performance.
Finish
BLK,CLB
GBZ,GRN
GTB,TBK
TGR
Custom
Option
PCL
Part String
Example: D154-TS20-T5/70MH/BLK
Assembly Details
(Example: PT01 / D154-TS20R/HR3-GL)
Standard Photometry
1 1/4" schedule 40
aluminum pipe
PT01/D154-TS20R/HR5
Typical HID light source
14,000 Lumen
12' Mounting Height
Grid Spacing is 12'
(Cutaway) Quick
Disconnect
Allows for fixture
orientation
5/16" Black oxide coated
stainless steel set screw
HID ballast assembly
Cast aluminum housing
0.
05
10
0.
0.2
Decorative
aluminum rings
1.50
1.
5
50
0.
White acrylic lens (specify
“UL” for IES full cutoff)
00
2.
00
3.
5
4kv Pulse rated
porcelain
socket
Segmented
reflector
Lamp sold
se rately
sepa
y
(6) 5/16" Black
oxide coated
stainless steel
set screws
Gasket
Socket Types
Quick
Disconnect
Hinged flat
tempered glass
Cast aluminum ring
Wattage
Socket Type
50MH,70MH,100MH,150MH
Medium
50HPS,70HPS,100HPS
Medium
Mounting Options
Slip fits a 3" tenon
19"
19"
44"
23"
41"
41"
36"
35"
WBRO3/D154-TS20R
WBRO6/D154-TS20R
PT51/D154-TS20R
PT01-SCR05/D154-TS20R
PT12/D154-TS20R
Slip fits a 4" tenon
24"
27"
50"
25"
39"
36"
29"
CBR02-1-24/D154-TS20R
CBR02-2-24/D154-TS20R
CBR40-1-24/D154-TS20R
CBR41-1-24/D154-TS20R
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising