VDV Commander
VOICE / DATA/ VIDEO
VDV Commander
Full-Featured Voice/Data/Video Cable Tester
™
VDV Commander
™
VDV Commander™ Series locates, tests and measures coax, data and telephone
Full-Featured Voice/Data/Video Cable Tester
cables to ensure fast and accurate voice/data/video installations. In addition, the
Commander detects Power over Ethernet (PoE), has a full
color screen and internal memory to store, download
and output test results for easy report management.
Test coaxial, data (RJ45) and telephone
(RJ11) cables
• Wiremap per TIA-568A/B industry standard
• Identify wiring faults
• Miswire
• Open
• Short
• Split-pair
• Reverse-pair
• Verify shielding
• Single-end cable testing or complete
cable testing with Test-n-Map™ ID Remotes
PoE
Measure cable length and distance to
a fault with Time Domain Reflectometry
(TDR) technology
• Measure paired-conductor cables: voice, data, video,
•
•
•
•
•
doorbell, siamese, lamp-wire and NM cables, up to
1,500 ft. (457 m)
Accuracy up to ±(5% and ± 1 ft./0.3 m)
Identify the distance to a short to determine
if a cable is damaged
Identity cable runs outside specification
to ensure compliance
Measure cable remaining in a box or on a reel
Simplify cable estimating and bill jobs
more accurately
Detect, identify and test
Power over Ethernet (PoE)
• Detect the presence of PoE
• Detect class and test loads up to 25.5 watts
• Test to ensure adequate power for PoE device
• Test IEEE802.3af and IEEE 802.3at
•
(PoE Plus) compliant Power over
Ethernet systems
Identify modes A or B
(Ethernet pairs with power)
VDV501-829
VDV Commander
™
Fig. 1
Fig. 2
FEATURES
RJ-45 8-Wire Cables
F-connector Coaxial Cables
Telephone Cables
Fig. 3
Fig. 4
Locate and Identify Cables
• Location ID Remotes – up to 20 locations (Fig. 1)
• RJ45 LanMap™ ID Remotes
• F-Connector CoaxMap™ ID Remotes
• Location Identification and Testing – up to 8 locations (Fig. 2)
• Test-n-Map™ ID Remotes
• RJ45 and RJ12 ports
• Link Light (Fig. 3)
• Identify a hub or switch with a blinking light
• Visually locate cable runs by flashing system status/activity LED
• Tone Generator* (Fig. 4)
• Trace cables, wire pairs and individual conductor wires
• Indicates to a single cable/pair/pin
• Includes four tones
Pass
●
Open Fault
●
Short Fault
●
Miswire Fault
●
Split-Pair Fault
●
TIA-568A/B & Crossover/Uplink
●
Detects link speed and capabilities to 1 Gbps
Single-End Cable Testing
Two-End Testing
Test and identify location with remote
TDR
Power Over Ethernet Testing
Time Domain Reflectometry
Length Measurement Method
Measures Cable Length
±(5% and ± 1 ft.)
Accuracy / Measurement Resolution
±(5% and ± .03 m)
Link Light
ID
Cable Identification
S
1,500 Ft. / 457 m
●
●
up to 20
●
256
●
4
Color LCD Display
2.7" (69 mm)
Multiple Languages
ENG·ESP·FRA
Imperial or Metric Results
●
Auto Power Off
●
Customizable Setup
●
(for PC connection)
Upgradeable Firmware
(requires internet & pc connection)
* Functionality requires an analog tone tracing probe - VDV500-060 (Included in some kits).
• Save up to 256 cable or network tests
• Customize reporting with user defined names
• Export and print color reports
●
Low Battery Indicator
USB interface
Reporting
●
●
Down to Single Conductor/Pair/Cable
Apo
●
Voltage Warning
Multiple-style Tone Generator*
Ft. / m
●
●
Print Custom Reports
• Detect active Ethernet current link speed, up to 1 Gbps
• Indicates advertised speeds 10/100/1000BASE-T half/full duplex
●
Shield Detection
Store Test Results
Perform Active Network (Ethernet) Testing
●
With Adapter
Wiremap
Active Ethernet
PoE
●
MICRO
●
VOICE / DATA/ VIDEO
VDV Commander
™
VDV Commander TM Test Kit
VDV Commander TM Test & Tone Kit
VDV501-828
VDV501-829
• 1 VDV Commander™ Tester
• 1 Test-n-Map™ ID remote
• 5 LanMap™ RJ45 starter set location ID remotes
• 5 CoaxMap™ F-Connector starter set location ID remotes
• 1 test cable – Micro USB to USB A
• 1 test cable – universal RJ12 jumper (9")
• 1 test cable – RJ45 jumper (9")
• 1 coax adapter – Barrel (F-F, female)
• Batteries
• Carrying case
• 1 VDV Commander™ Tester
• 1 PROBEplus Tone Tracing Probe
• 1 Test-n-Map™ ID remote
• 20 LanMap™ RJ45 location ID remotes
• 20 CoaxMap™ F-Connector location ID remotes
• 1 test cable – Micro USB to USB A
• 1 test cable – universal RJ12 jumper (9")
• 1 test cable – RJ45 jumper (9")
• 1 coax adapter – Barrel (F-F, female)
• Batteries
• Carrying case
Cat. No.
UPC# 0-92644
Batteries
Battery Life
Height
Width
Depth
Weight (with batteries)
VDV501-828
58211-0
6 AA alkaline
batteries included
20 hours active
10 years standby
6.8" (173 mm)
3.6" (91 mm)
1.85" (47 mm)
12 oz. (340 grams)
VDV501-829
58212-7
6 AA alkaline batteries
included
Probe: 1 9V alkaline battery
20 hours active
10 years standby
Probe: 25 hrs. active
4 yrs. standby
6.8" (173 mm)
3.6" (91 mm)
1.85" (47 mm)
12 oz. (340 grams)
See our complete line of Voice/ Data/ Video products at
www.kleintools.com
© 2014 Klein Tools, Inc.
Lincolnshire, IL 60069-1418
Rev. 3/14 B
96346
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising