RD32 USER MANUAL Preface Thank you for

RD32 USER MANUAL
Preface
Thank you for purchasing RD32, HD Digital waterproof video camera. This product is quite small and delicate
with wonderful waterproof humanity design. With a multipurpose stand, it can help you achieve omni-directional
video / monitoring under all kinds of outdoor conditions.
The User's Manual will instruct in detail how to use and install the product and provide detailed information
regarding to use, operation, installation notes and technical specifications etc. Before using the product, please
read this manual carefully and keep it properly. We hope that this product can meet your demands and provide a
long-term service to you!
Product Assurance
Certificated by FCC & CE etc. authoritative institutions, this product shall be in line with the recommended index
and provide safe assurance when being used by users.
Product Overview
As an underwater activity fan, you are always impressed by the beautiful scene in the sea or lakes, then are
you still looking for a companion that can help you record your unforgettable experiences?
Try our RD32. It is specially designed for diving. Water-proof feature makes it possible to take photos and
record videos under water up to 20 meters. With high-definition camera lens and low light level sensitivity, you
will never miss any chance to enjoy the beautiful view of the deep blue ocean with such a good underwater
companion.
Product Features
> The product not only has dynamic appearance and elegant lines, but also has a waterproof function. It can
work underwater 20 meters. It will be the best choice for your outdoor sports and diving.
> Professional monitor design, with motion-detect function. Once connect to the monitor, it will become a
professional security camera
> Advanced vibration effect, makes mode transfer more convenient, easier to operate
> 120 degree wide-angle, HD camera lens, let you shoot more freely.
> Selectable Motion-detect video recording time setting: 10 seconds, 1 minute, 5 minutes, 10 minutes
> In motion-detect mode, users are free to choose whether to use loop recording & coverage function
> Three major selectable video quality: superior, standard, economic
> Video resolution: 1280*720p AVI, 30fps
> 8 white LED lights / 4 LED infrared light and 4 LED white light (alternative)
> Built-in high capacity Li-battery lasting video recording for 3 h.
> 2GB mini TF card (optional), support up to 32 GB
> PC camera function, makes your network life more colorful
> TV-out function, easy to share more funs
> USB2.0 high-speed device, data transmission freely
Product Structures
Respectively is: 1. Power key/ model transfer key/ up direction key 2. Recording/playing execute key 3. Led
indicator key/down direction key 4. LED light (Red & Blue) 5. LED light (Yellow) 6. Reset port/microphone
hole 7. Waterproof plug/Waterproof cover 8. Camera lens 9. Led indicator 10. USB port 11. TF card port
12. Charging indicator 13. TV-OUT port 14. Base stand 15. Stand 16. Tail dot
•
Installation (With Pictures)
RD32 can be used handheld or can be installed on the bracket to use, as the picture below shows:
1. Remove the back cover: Rotate the back over simultaneously to push back outside, then you can remove the
back cover
2. Installtion of RD32
Power
This product shall adopt the power certified by authority.
UL Mark
U.S. Power Certification
C-TICK Mark
Australia Power Certification
CE Mark
European Union Power Certification
GS Mark
German Power Certification
CCC Mark
China Power Certification
PSE Mark
BS Mark
Japan Power Certification
UK Power Certification
Notes: During the service of power, increase in surface temperature is a normal phenomenon. If portable power
supply is needed, please remove power source from the outlet.
Packaging & Accessories
Accessories:
Notes: Picture may be slightly different from the actual product and packaging shall be subject to change without
further notice.
Functional specification
1. Starting up
> Insert TF Card, press power key for 2 seconds. Release the button once the blue LED lights up. The product.
will vibrate for a short period of time and then stop indicating that it has entered into Standby mode.
> It may take a while to enter into Standby mode depending on the data storage capacity of the TF Card being
used.
> For the product video resolution is HD 720P, please use a brand high-speed(CLASS6)TF card to avoid the
recording issues.
Note: The blue indicator flashes quickly when turned on without TF Card. Please turn off and insert TF card
again.
2. Mode transfer
When it turns on, press the mode transfer key short, it will circle in 4 modes:
Mode1: Manual video recording standby mode, blue indicator will be constantly on.
Mode2: Manual photo taking standby mode, red indicator will be constantly on.
Mode3: Motion-detect video recoding standby mode, blue and yellow indicator are (motion-detect start)
constantly on together.
Mode4: Motion-detect photo taking, red and yellow ( motion-detect ) indicator are constantly on together.
Note:
1、The camera will shake once after pressing the key which indicates that the key is in effect, if the status indicator
is not changed immediately, please don't press it again, the camera is saving data. It is a normal situation, please
wait for a moment.
2、When it is transferred to other modes from motion-detect mode, the reaction will be faster if you shut out the
lens.
3. Video Recording
In the manual video recording mode, press the execute key shortly, the camera will shake once, and the blue
indicator flashes slowly and the camera begins to record video. Press the key again, the camera will shake once
and blue indicator will be constantly on, indicating Standby mode and that recording has stopped.
Note :
1、Each video clip will be recorded to a maximum of 20 minutes. The file will be saved and recording will
automatically resume on a new file once this limit is reached.
2、Please remove the waterproof plug for better audio recording when not in use it underwater.
3、When the TF Card is full, battery used up or standby mode for 3 minutes, it will shut down automatically.
4. Photo Taking
In the manual photo taking standby mode, press the execute key, then please keep the camera still until it vibrates,
a photo has been taken after vibration stops.
Note:
1、The red indicator will go out when it is taking photo, please keep it still for better picture quality!
2、When the TF Card is full, battery used up or standby mode for 3 minutes, it will shut down automatically.
5. Motion-detect video recording
> When the camera captures mobile objects, it will record video for 10 seconds, 1min, 5mins, 10mins(depends on
system setting) and save the video automatically, then it record next video and loop recording.
> Motion-detect recording loop coverage: when the TF Card is full, will delete the former videos or photos
automatically one by one to acquire relevant space to store new videos. If the function is closed, the camera will
power off automatically when the storage space is full.
> Lasting time of video recording and motion-detect recording loop coverage function can be amended by the
system settings, please refer to the system setup instruction.
Note:
1、When not in use underwater, please remove the waterproof plug for better audio recording.
2、When the TF Card is full (the loop coverage function closed) or battery used up, the unit will shut down
automatically.
3、Enter into this mode, if you don’t operate the unit for 3 minutes, LED light will turn off, the camera is still at
work, press any key to instruct.
6. Motion-detect photo taking
> When the camera captures mobile objects, it will take a photo automatically.
> Motion-detect photo taking loop coverage: when the TF Card is full, it will delete the former videos or photos
automatically one by one to acquire relevant space to store new videos. If the function is closed, the camera will
power off automatically when the storage space is full.
Note:
1、When the TF Card is full (the loop coverage function closed) or battery used up, it will shut down
automatically.
2、Enter into this mode, if you don’t operate the unit for 3 minutes, LED light will turn off, the camera is still at
work, press any key to instruct.
7. Turn on the LED light
Short press" Led light key "in the state of any mode( except TV-out playback mode),the LED light will circle
in 3 modes;
If your choose is 8 high brightness white LED lights, please turn on it as below;
Mode1: Turn on the 8 white LED lights, it can record video in color.
Mode2: Turn on 4 LED white lights, Brightness abates and it can reduce power consumption.
Mode3: Turn off all the white LED lights.
If your choose is 4 LED white light and 4 LED infrared light, please turn on it as below;
Mode1: Turn on the LED white light, it can record video in color.
Mode2: Turn on LED infrared light, the video will be in black and white in the dark circumstance.
Cause the infrared lamp was invisible and hidden, so it can be used for surveillance.
Mode3: Turn off all the LED light.
Note: Press and hold down the LED light "
operated successfully.
8. Turn off and automatic turn off
" to turn off all the LED functions. The camera will shake when it is
In the standby mode, press and hold down the "power key" for two seconds, the blue light flashes 3 times and
goes out, and then release your hand. The camera shakes twice, and then the camera turns off.
Note: The camera will turn off automatically when the TF Card is full (the loop coverage function closed), the
battery is used up, the AV cable is disconnected, or there is no operation after 3 minutes, the red & blue light will
flash alternately when you turn off the camera.
9. Downloading your content.
> Please turn off the camera before connecting it to the computer.
> The camera turns on automatically, and a removable disk will appear in "my computer", you can view the
pictures or videos in the removable disk "DCIM/100DSCIM", and you can also copy these files to your
computer.
> When it is connected with USB1.1 port on computer, please copy the video to your computer desktop, and then
replay it to avoid ragged playback.
Note: in the state of this mode, you can short press the " LED light
" to turn on the light, can be used as a USB
table lamp.
10. PC camera function
> Install the CD driver software at the computer.
> Turn on the camera, after the vibration stops, please connect it to the computer, at that time, a "camera" Icon
will appear in "my computer", it enters into PC camera function.
> Using the "third-party" applications software, you can also view real-time video of PC camera and save
real-time video into the local computer, e.g. Amcap etc.
Note: in the state of this mode, you can turn on the white LED lights to achieve the better quality video.
11. Charging
> Plug the AC adaptor into socket then connect with the camera for battery recharging. The red indicator turns on
when charging. It turns off after the battery is full charged. The charging time is about 3 hours.
> To avoid extended charge times, it is recommended that the camera be charged via the adapter. Charging via
connection to the computer is not recommended.
Note: After connect with charger, camera will turn off automatically after 3 minutes, it's still charging after turns
off.
12. Taking video when charging
Put the AC adaptor into socket, then connect with camera, the camera will turn on automatically and enter into the
standby mode. The red light will constantly on indicating it's charging. In the meantime, each function is still
available for operation.
Note: when the camera turns off automatically, if you want to use it again, disconnect the camera from the adaptor
for about 5 seconds and then connect it again, the camera will restart.
13．TV-out function
> Please connect the plug of 2.5' AV cable with the camera’s TV-OUT port, the yellow plug connect with TV
video input port(yellow), white plug connect with TV audio input port(white). Please set the signal input
according to the user manual of TV.
> Turn on camera, after a few seconds, the red and blue light turn on at the same time, the last photo or video will
be appeared on the TV.
> Manually play: by pressing 'up button
'or 'down button
' for browsing, when video camera Icon appears on
the top right corner, it indicates the file is video, press "confirm button
"to play the video. Please set the TV
volume in order to get proper sound effect.
> Auto play: short press "confirm button
"into auto play mode, when it plays the pictures, it will stay for 5
seconds then change to another one, when it plays the video, it will be replayed directly.
> Stop auto play: during auto play mode, short press "confirm button
"to stop auto play
> Stop TV-OUT: Please press the "power key" for long to turn off the camera.
Note: When play a large video file, need to wait a few seconds to a minute, it's a normal phenomenon.
14、Motion detect monitor mode
>Connect the yellow plug with the TV video input port(yellow) white plug connect with TV audio input
port(white).Please set the signal input refer to TV user manual.
> Turn on the camera, short press "Mode button
"into motion detect video recording mode(yellow and blue
light will hold on together)
Please connect the plug of 2.5' AV cable with the camera’s TV-OUT, after few seconds, the video will be appeared
on the TV. In the meantime the camera will enter into the state of intelligent video recording, When object moves
before the camera, the camera will record a 10 seconds, 1min, 5mins, 10mins(depends on system setting) video
file, and so the cycle.
> Short press "Mode button
", camera will change to motion detect monitor photo taking mode (yellow and red
light will hold on together).When object moves before the camera, it will start to take a photo automatically, and
so the cycle.
> Motion detect video recording/ photo-taking loop recording: when TF card is full, the camera will delete the
former videos or photos automatically one by one to acquire relevant space to store new videos or photos. If turn
off loop recording function, the camera will turn off automatically when there is no enough space to record.
> Video recording time and turn on/off loop recoding function can be changed by system setting, please refer
system setting instruct.
> Stop motion detect monitor mode: Please press the "power key" to turn off the camera.
Note:
1、During the recording, short press "Mode button
can change video and photo mode. Please obstruct the lens
when change the mode, the reaction will be fast
2、If the camera doesn't use underwater, can open back cover to get better recording voice.
3、Enter into this mode 3 minutes later, LED light will turn off, the camera is still at work, press any key to
instruct.
15、system parameter setting
> Please refer to TV- OUT operation into TV-OUT mode. Long press "confirm button
> Button function: short press "
"choose or quit different setting, short press"
"
"save and quit the setting.
"as down button, long press "
".
"as up button, short press
> setting items:
1. Quality: Fine, Standard, Economy
Introductions: set the quality of the video, the consume of the insert storage will increase with high quality.
Note: Please use the brand high-speed(CLASS6)TF Card, to avoid the video pause when you record the video!
2. MD capture time: 10 seconds, 1 minute, 5 minutes, 10 minutes
Illuminate: Setting motion-detect video recording time, it will save the recording video when reach this time.
3. MD auto delete: on/off
Illuminate: Setting loop recording function. When TF card is full under the motion detect mode, the camera
will delete old file automatically to start new recording. If turn off this function, the camera will turn off
when TF card is full.
4. Date Input:
Illuminate: If the time stamp is wrong, please set correct time and date.
5.Light frequency: 60Hz 、50Hz
Illuminate: Setting light frequency according to electricity frequency to cancel the flash under the lamp.
6. TV Output: NTSC、PAL
Illuminate: When use TV-OUT function, choose the right video formation will show the right color on TV
7. Language: English, Français, Deutsch, Italiano, Español, Português, Chinese Traditional, Simple Chinese,
Japanese
8. System Reset: Cancel/Execute
Illuminate: If you want to reset the system, choose "Execute", and short press "
Note: System time won't be reset.
9. Time Stamp: date and time, off
Note: it is used for opening or closing images watermark markers
10. Version
Note: Use for viewing the software version and related information
16. System time setting
If the time stamp is wrong, please setting as below:
Method 1: Setting by TV, please refer to system parameter setting.
Method 2: Setting by computer
1. Turn off the camera;
2. Connect with computer by USB cable;
3. Open U-disk
".
4. Create a new "time.txt" file.
5. Open"time.txt" file and input relevant words of time&date setting up, as following
"year.month.date hour:minute:second on/off"
(Keep a space between date and time, and another space between time and water mark switch).
Please set time and date as per the following format:
Video with time watermark: 2011.03.22 20:00:00 Y
Video without time watermark: 2011.03.22 20:00:00 N
Precautions:
The time character strings in the above-mentioned format is the time value you want to set up and pay attention to
type a spacebar between date and time, another spacebar between time and watermark switch. Y and N at the end
serve as the control character on the video file for adding the time&date watermark, Y indicates Yes-Add
watermark and N indicates No-Hide watermark.
6. Save "time.txt" file and safely exit the movable disk.
7. Then turns on the power, the system time will be updated.
Note: If the camera is left unused for extended periods, the battery may completely drain. When this happens the
system time will be restored back to the factory defaults.
17. Reset the system
If the camera becomes inoperable or jammed for any reason, please use a pin to press the pin hole. This will shut
the camera down so that a fresh start can be made.
Parameters
Effective Pixels
5.0 Mega CMOS SENSOR
Photo format
JPG
2560*1920
Video format
AVI
HD
Frames
30fps
MD time setting
10sec、1min、5 min、10 min
MD loop coverage
Support turn on and off
Video quality setting
Superior、Standard、economic
Shooting Angle
120 degree wide-angle
Illuminant frequency set
60Hz、50Hz
Video output format
NTSC、PAL
Vibrating alert
Support
Battery Capacity
3.7V/ 850mAh
Power consumption
Below 1W
Continuous video recording time
About 3 hours（led indicator closed）
AC Adaptor spec
DC5V 1A or more
Charge time
About 3 hours
USB Interface
USB2.0 High Speed
Memory type
Micro SD Card (TF card)
Memory card
1GB-32GB
Waterproof Depth
20 meters
1280* 720
Weight
75g
Product Dimensions
90*41*36mm
Notes: The above-said parameters may be changed with upgrading or updating, if there is any changes, they shall
be subject to the actual items.
System
1. Operation system: Microsoft Windows2000/XP/VISTA/WIN 7
2. CPU：Intel Pentium III processing 667MHZ or equivalent CPU
3. 256MB sound card and graphics card support DircetX8 or higher.
4. USB1.1 or USB2.0 interface,
5. 1GB or more free disk space.

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project