PCI Express 5.1 Channel Sound Card
PCI Express 5.1 Channel
Sound Card
User Manual
Ver. 2.00
All brand names and trademarks are properties of their
respective owners.
Features

Compatible with PCI Express 1.1 interface with bus mastering
and burst modes

Audio format supports 96K/48K/44.1K and 16/24bits
resolution

Integrated 96K/48K/44.1K, and 16/24-bit SPDIF transmitter
System Requirements

PCI Express-enabled system with an available PCI Express slot

Windows® XP/Vista/7/8/8.1 (32/64 bit)

DirectX 8.1 above is required
Package Contents

1 x PCI Express 5.1 Channel Sound Card

1 x Driver CD

1 x User Manual

1 x Mini-DIN to 3.5mm fan-out cable
Note: Contents may vary depending on the market/country.
Page 2
Hardware Installation
1.
Turn off the computer, Unplug the power cord.
2.
Open
the
computer
case.
Check
with
your
computer
manufacturer if you need additional instructions. Remove any old
third-party sound cards or the metal PCIe slot bracket.
3.
Insert the sound card into a blank PCIe slot. Make sure that all of
its pins are touching the PCIe slot’s contacts.
4.
Check the sound card is inserted into the PCIe slot firmly, and
secure it with a screw.
5.
Close the case. Plug in the power cord and other cables.
6.
Connect the Mini-DIN to 3.5mm fan-out cable bundled in this
package and use for 6-channel line output jack.
Software Installation
For Windows® XP/Vista/7/8/8.1 (32/64 bit)
1.
Insert the provided CD into your disk drive. The CD-ROM will
start automatically. The following screen will show up and please
click “Install Driver”.
Page 3
*Note: Actual image may vary
Note: If the install program doesn’t run automatically, please
locate and double-click on the Autorun.exe file in the CD to
launch the install program.
2.
Please click “PCI Express”.
*Note: Actual image may vary
3.
Please click “CM8826 6CH” to start the installation.
Page 4
*Note: Actual image may vary
4.
Follow the instructions on screen to install the driver.
Physical Connections
Page 5
The rear panel of this 5.1 Channel PCIe Sound Card has the following
jacks:
1.
Line In (blue): Connect to tape/CD/DVD player, or other audio
sources for output mixing and/or recording
2.
MIC In (pink): Connect to microphone
3.
Front Speaker (green): Connect to headphone or amplifying
speakers
4.
Center/Subwoofer (orange): Connect to center/subwoofer
speakers while 6 channel speaker mode is enabled (via external
amplifier)
5.
Rear-Speaker (black): Connect to rear speakers while 4/6
channel speaker mode is enabled (via external amplifier)
6.
S/PDIF Out: Connect to digital input of external audio device
via an optical S/PDIF cable
Please refer to the audio configuration table below for the function of
the audio ports in 2, 4, 6-channel configuration.
Page 6
Port
2-channel
4-channel
6-channel
Green
Line Out
Front
Front
Speaker
Speaker
Rear
Rear
Speaker
Speaker
-
Center
Black
Orange
-
/Subwoofer
In addition to the rear panel jacks, this 5.1 Channel PCIe Sound Card
also has the following internal connection:
The Function
7. Front panel
Intel HDA front-panel compatible and supports
audio header
HP jack-detection and automatically switches
audio output from the back panel to the front
panel.
Supports both front-panel and sound card Mic
input mixing
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising