SR7007 - Cherubini
7ch Integrated Network Receiver
7.2 Channel 4K & 3D Pass Through,
Networking Home Theater Receiver with AirPlay
Simplicity and elegance characterize the SR7007. With the blue illuminated and iconic porthole display plus the drop-down
door in all brushed aluminum front panel, the receiver offers both style and comprehensive features, including an Ethernet
port, seven HDMI inputs, three HDMI outputs, and playback of the latest hi-definition audio formats. AirPlay® allows you to
stream music wirelessly from your iPhone®, iPod® Touch and iPad® over your home network. Three audio and video zones,
networking, and support for Bluetooth devices deliver the flexibility you need. While our proprietary HDAM (Hyper-Dynamic
Amplifier Module) audio circuits, Current Feedback topology, and seven fully-discrete, 125 watt amplifiers provide the crushing
dynamics detail retrieval you demand.
Audio/Video Quality
Fully discrete power amplifier for all 7 channels (125 W x 7 ch, 8ohm 20-20kHz 0.08%)
7 (front: 1) /2 HDMI In/Out
New LCD Learning Remote handset
-Simultaneous dual outputs allows two video
Auto Power Off
devices connected and output same source
Current feedback & HDAM pre amplifier circuit
4K video support (path-through and GUI overlay)
-CEC (Control)
3D pass-through technology for enjoying 3D
-ARC (Audio Return Channel)
video entertainment with dynamic surround sound
-Standby source setting via HDMI control
Mobile App control with advanced media browsing.
(iOS & Android)
Additional Features
Power amp Assign for 7.1ch (SB ch.), 5.1ch +
1080p/24Hz upscaling via HDMI
-Auto Lip Sync.
Front Height, 5.1 ch + Front Wide, 5.1ch + Bi-Amp,
4K (3840×2160) upscaling via HDMI
-Deep Color,“x.v.Color”
5.1ch + zone, or 5.1ch + Front B
-Pass through in standby mode
Connectivity, Flexibility
& Expandability
Airplay: Stream music from your iPad, iPhone or
iPod Touch or from your iTunes music library
Internet Radio
Networking Ready: Stream internet radio, Pandra,
SIRIUS XM, as well as music and photos over the
home network
Bluetooth wireless connectivity (M-XPort) via optional RX-101 adaptor
Gold plated 7.2 Channel Pre-amp outputs (parallel)
allow the connection of external power amplifiers if
Front Panel USB Input Direct digital play for iPod,
iPhone and USB drives
-Zone2 HDMI output allows different source
Selectable zone component monitor, Zone 2
CVBS monitor, and Zone 2 HDMI monitor
for zone2
3 source Zone 3 capability
Audyssey MultEQ XT setup
IR Flasher In
Audyssey Dynamic EQ & Dynamic Volume
RS232C control (AMX/Crestron command)
3/1 (gold plated) Component In/Out
C4 certified (IP/232C)
4 (front: 1) / 2 (gold plated) Composite In/Out
Assignable DC trigger (+12V, 150mA x 2)
2/2 Optical/Coaxial (gold plated)Digital In
Firmware Upgradable via Internet
Headphone output
HD Radio (AM/FM) and FM Tuner
Marantz Audio Advantage
56 Tuner Presets
Pure Direct / Source Direct
6 Audio inputs (incl. front input) and an
M-DAX (Marantz Dynamic Audio eXpander)
output(gold plated)
Phono input (gold plated)
7.1 ch Input
192kHz/24-bit Audio DACs
Transparent binding post speaker terminals
(gold plated)
DSD to PCM convert playback capability
Ease of Use
Improved System Setup with menu assist.
Rich overlay GUI with English, French, or Spanish
Aluminum front panel with trap door and
aluminum knobs
Audio Section
Power amplifier
Rated output:
125 W + 125 W (8 ohm, 20 Hz – 20 kHz with 0.08 % T.H.D.)
195 W + 195 W (6 ohm, 1 kHz with 10 % T.H.D.)
125 W (8 ohm, 20 Hz – 20 kHz with 0.08 % T.H.D.)
195 W (6 ohm, 1 kHz with 10 % T.H.D.)
125 W + 125 W (8 ohm, 20 Hz – 20 kHz with 0.08 % T.H.D.)
195 W + 195 W (6 ohm, 1 kHz with 10 % T.H.D.)
Surround back:
125 W + 125 W (8 ohm, 20 Hz – 20 kHz with 0.08 % T.H.D.)
195 W + 195 W (6 ohm, 1 kHz with 10 % T.H.D.)
Input sensitivity/Input impedance: 200 mV/47 k ohm
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT
S/N: 102 dB (IHF–A weighted, DIRECT mode)
D/A output: Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input: Format — Digital audio interface
Phono equalizer (PHONO input)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
S/N: 74 dB (A weighting, with 5 mV input)
Rated output: 150 mV
Distortion factor: 0.03 % (1 kHz, 3 V)
Video Section
Standard video connectors
Input/output level and impedance: 1 Vp-p, 75 ohm
Frequency response: 5 Hz – 10 MHz 0, –3 dB
Color component video connector
Input/output level and impedance: Y signal — 1 Vp-p, 75 ohm
PB / CB signal — 0.7 Vp-p, 75 ohm
PR / CR signal — 0.7 Vp-p, 75 ohm
Frequency response: 5 Hz – 60 MHz — 0, –3 dB
Tuner Section
(Note: µV at 75 ohm , 0 dBf = 1 x 10–15 W)
Receiving Range:87.5 MHz – 107.9 MHz
Usable Sensitivity: 1.5 µV (14.8 dBf)
S/N: MONO 78 dB (IHF–A weighted, DIRECT mode)
STEREO 68 dB (IHF–A weighted, DIRECT mode)
HD 85 dB
Total harmonic Distortion (at 1 kHz):
MONO 0.1 %
STEREO 0.2 %
HD 0.02%
Receiving Range:AM: 530kHz – 1710kHz
Usable Sensitivity: 20 µV
S/N: HD 85 dB
Total harmonic Distortion (at 1 kHz): HD 0.02 %
Power supply: AC 120 V, 60 Hz
Power consumption: 670 W
0. 2 W (Standby mode)
0.5 W (CEC standby mode)
2.7W (network standby mode)
Dimensions (W x H x D):
17 21/64” x 7 23/64 ” x 15 63/64”
440 x 187 x 406 mm
Weight: 27 lbs 9oz, 12.5 kg
4K video support (Video passthrough, video upscaling)
Dual HDMI outputs
Stream music from your iPad®, iPhone® or iPod
Touch® or from your iTunes® music library.
New Apps
*Dolby, Pro Logic, and the double-D symbol are registered trademarks of Dolby Laboratories.*DTS, DTS-HD, the Symbol, & DTS or DTS-HD and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved. *The terms HDMI and HDMI HighDefinition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. *Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the
United States and/or other countries. *Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® are registered trademarks of Audyssey Laboratories. *“Made for iPod,” and “Made for iPhone,” mean that an electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with
iPod, or iPhone, may affect wireless performance. *AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. *”x.v.Color” is a trademark of Sony Corporation. *SIRIUS, XM
and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All rights reserved. Service not available in Alaska and Hawaii. *HD Radio™ and the HD Radio logo are proprietary trademarks of iBiquity Digital Corp.
©2012 Marantz America, LLC.
For purposes of improvement, specifications and design are subject to change without notice.All specifications, dimensions and weights are subject to
change without notice. D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet
which may result in consequential errors Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information
contained within this document.
Call for Assistance: 9:00AM to 8:00PM M-F E.S.T.
For frequently asked questions please visit
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF