L-GE3000 Series
L-GE3000 Series
PCI Express Gigabit Ethernet Adapter
NIC Cards
Overview
EtherWAN GE3000 PCI Express Gigabit Ethernet adaptor supports PCI Express 1.0a
bus interface and provides significant high-bandwidth performance over existing
conventional PCI architecture. Microsoft NDIS5 (IP, TCP, UDP) checksum checking
calculation and TCP segmentation/large send are offloaded from CPU and I/O
of host system to improve system performance. Advanced Configuration Power
Management Interface (ACPI) 2.0 and Wake-on-LAN (WOL) provide efficient minimal
power operation and sleep states. GE3000 supports IEEE802.1Q VLAN Tagging to
enable VLANs for network segmentation and security. It also supports IEEE 802.1p
Layer 2 Priority Tagging to prioritize traffic.
GE3000 can be managed remotely since it complies with RFC 1157 SNMP v1. It also
provides Preboot Execution Environment (PXE) 2.1 to remotely boot workstations
and thin clients on the network.
Features
PCI Express 1.0a compliant
TCP segmentation/large send offload
Advanced Configuration Power Management Interface (ACPI) 2.0
Supports Wake-on-LAN remote wake-up (GE3000TX only)
IEEE802.1Q VLAN Tagging
IEEE802.1p Layer 2 Priority Tagging
Preboot Execution Environment (PXE) 2.1
Microsoft NDIS5 (IP, TCP, UDP) checksum of fload
RFC 1157 SNMP v1 compliant
Cable diagnostic utility
Supports Jumbo Frame up to 7K (Vista) and 4K (XP and other OS)
1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex,
Auto-Negotiation, Auto-MDI/MDIX
0°C to 45°C (32°F to 113°F) operating temperature range
Ordering Information
GE3000TX
GE3000SX
GE3000LX-10
GE3000LX-20
10/100/1000BASE-TX Gigabit Ethernet Adapter
1000BASE-SX Multi Mode (SC) Fiber Gigabit Ethernet Adapter
1000BASE-LX Single Mode (SC) -10Km Fiber Gigabit Ethernet Adapter
1000BASE-LX Single Mode (SC) -20Km Fiber Gigabit Ethernet Adapter
L-GE3000 Series
PCI Express Gigabit Ethernet Adapter
Specifications
Technology
Standards:
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX/100BASE-FX,
IEEE802.3ab 1000BASE-T, IEEE802.3z 1000BASE-SX/1000BASE-LX,
IEEE802.3x, IEEE802.1Q, IEEE802.1p
Protocols:
SNMP V1
Processing Type:
IEEE802.3x full-duplex flow control
Driver
Microsoft Windows 2000/ XP/ 2003/ Vista(32bit/64bit),
Windows 7(32bit/64bit)
Linux 2.4x/2.6x
Novell Netware 5.x/6.x
Power
Power Consumption:
2.3W Max.
Mechanical
Dimensions:
125mm (L) x 121mm (W)
(4.92" (L) x 4.76" (W))
Weight:
80g (0.18lb.)
Interface
Ethernet Port:
Gigabit: 1port
LED Indicators:
Per Unit: Link, Activity
Environment
Operating Temperature:
0°C to 45°C (32°F to 113°F)
Storage Temperature:
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity:
5% to 95% (non-condensing)
Regulatory Approvals:
ISO:
Manufactured in an ISO9001 facility.
Emission Compliance:
CE Mark Class B, FCC Part 15 Class B
Diagrams
22mm
90mm
121mm
125mm
Accessories
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising