XM7155 Cheat Sheet
Lexmark XM7155
— y
Cheat Sheet
Copy guide
Page 1 of 4
Copy guide
Making a quick copy
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2 Adjust the paper guides when loading a document into the ADF.
Note: Make sure the size of the original document and the copy paper size are the same. Failure to set the proper size may
result to a cropped image.
3 From the printer control panel, press * to start copying.
Copying using the ADF
1 Load an original document faceup, short edge first into the ADF.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2 Adjust the paper guides.
3 From the home screen, navigate to:
Copy > change the copy settings > Copy It
Copying using the scanner glass
1 Place an original document facedown on the scanner glass in the upper left corner.
2 From the home screen, navigate to:
Copy > change the copy settings > Copy It
3 If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the Next Page.
4 Touch Finish the Job to return to the home screen.
Understanding the copy screens and options
Copy from
This option opens a screen where you can enter the paper size of the original document.
® Touch a paper size that matches the original document.
* Touch Mixed Sizes to copy an original document that contains mixed paper sizes with the same width.
© Touch Auto Size Sense to allow the scanner to automatically determine the size of the original document.
Copy guide
Page 2 of 4
Copy to
This option opens a screen where you can enter the paper size and type on which your copies will be printed.
® Touch the paper size and type that matches the paper loaded.
® |f the settings for “Copy from” and “Copy to” are different, then the printer automatically adjusts the Scale setting to
accommodate the difference.
o |fthe paper type or size that you want to copy onto is not loaded in one of the trays, then touch Manual Feeder, and manually
load the paper in the multipurpose feeder.
* When “Copy to” is set to Auto Size Match, each copy matches the paper size of the original document. If a matching paper
sizeis notin one of the trays, then Paper size not found appears and promptstoloada paperin a tray or multipurpose
feeder.
Copies
This option allows you to set the number of copies to be printed.
Scale
This option creates an image from your copy that is proportionally scaled anywhere between 25% and 400%. Scale can also be
set for you automatically.
e When you want to copy from one size of paper to another, such as from legal-size to letter-size paper, setting the “Copy
from” and “Copy to” paper sizes automatically changes the scale to keep all the original document information on your copy.
® Touch the left arrow to decrease the value by 1%; touch the right arrow to increase the value by 1%.
® Hold your finger on an arrow to make a continuous increment change.
® Hold your finger on an arrow for two seconds to cause the pace of the change to accelerate.
Darkness
This option adjusts how light or dark your copies will turn out in relation to the original document.
Sides (Duplex)
Use this option to select duplex settings. You can print copies on one or two sides, make two-sided copies (duplex) of two-sided
original documents, make two-sided copies from one-sided original documents, or make one-sided copies (simplex) from two-
sided original documents.
Collate
This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document. The factory default
setting for Collate is on; the output pages of your copies will be ordered (1,2,3) (1,2,3) (1,2,3). If you want all the copies of each
page to remain together, turn Collate off, and your copies will be ordered (1,1,1) (2,2,2) (3,3,3).
Content
This option lets you set the original document type and source.
Choose content type from Text, Text/Photo, Photo, or Graphics.
* Text—Use when the content of the original document is mostly text or line art.
* Graphics—Use when the original document is mostly business-type graphics such as pie charts, bar charts, and animations.
Copy guide
Page 3 of 4
Text/Photo—Use when the original document is a mixture of text, graphics, and photos.
Photo—Use when the original document is mostly a photo or an image.
Choose content source from Color Laser, Black/White Laser, Inkjet, Photo/Film, Magazine, Newspaper, Press, or Other.
Color Laser—Use when the original document was printed using a color laser printer.
Black/White Laser—Use when the original document was printed using a mono laser printer.
Inkjet— Use when the original document was printed using an inkjet printer.
Photo/Film—Use when the original document is a photo from film.
Magazine— Use when the original document is from a magazine.
Newspaper—Use when the original document is from a newspaper.
Press— Use when the original document was printed using a printing press.
Other—Use when the original document was printed using an alternate or unknown printer.
Color
This option enables or disables color for the scanned image.
Advanced Options
Touching the Advanced Options button opens a screen where you can change the following settings:
ADF Skew Fix—Use to correct slight skew in the scanned image.
Advanced Duplex—Use to specify the document orientation, whether documents are one-sided or two-sided, and how
documents are bound.
Note: Some Advanced Duplex options are available only on select printers.
Advanced Imaging—Use to change or adjust Auto Center, Background Removal, Color Balance, Color Dropout, Contrast,
Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you copy the
document.
Create Booklet—Use to create a booklet. You can choose between 1-sided and 2-sided booklets.
Note: This option appears only when a print duplexer and printer hard disk are installed.
Cover Page Setup —Use to set copy cover page and booklet cover page.
Custom Job—Use to combine multiple scanning jobs into a single job.
Edge Erase—Use to eliminate smudges or information around the edges of a document. You can choose to eliminate an equal
area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area selected,
leaving nothing on that portion of the scan.
Header/Footer—Use to turn on Date/Time, Page number, Bates number, or Custom text, and prints them in the specified
header or footer location.
Margin Shift—Use to increase the size of the margin of an specified distance by shifting the scanned image. This can be useful
in providing space to bind or hole-punch copies. Use the increase or decrease arrows to set how much of a margin you want.
If the additional margin is too large, then the copy will be cropped.
Overlay—Use to create a watermark (or message) that overlays the content of your copy. You can choose between Urgent,
Confidential, Copy, and Draft, or you can enter a custom message in the “Enter custom text” field. The word you pick will
appear, faintly, in large print across each page.
Note: A custom overlay can also be created by your system support person. When a custom overlay is created, a button
with an icon of that overlay will be available.
bo ——
Copy guide
Page 4 of 4
® Paper Saver—Use to print two or more sheets of an original document together on the same page. Paper Saver is also called
N-up printing. The N stands for Number. For example, 2-up would print two pages of your document on a single page, and
4-up would print four pages of your document on a single page. Touching Print Page Borders adds or removes the outline
border surrounding the original document pages on the output page.
® Separator Sheets—Use to place a blank piece of paper between copies, pages, or print jobs. The separator sheets can be
drawn from a tray that contains a type or color of paper that is different from the paper your copies are printed on.
Save As Shortcut
This option allows the current settings to be saved as a shortcut by assigning a number.
E-mail guide
Page 1 of 4
E-mail guide
The printer can be used to e-mail scanned documents to one or more recipients.
You can send an e-mail from the printer by typing the e-mail address, using a shortcut number, or using the address book.
Sending an e-mail using the touch screen
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
Note: Make sure the size of the original document and the copy paper size are the same. Failure to set the proper size may
result to a cropped image.
3 From the home screen, navigate to:
E-mail > Recipient
4 Enter the e-mail address, or press # and then enter the shortcut number.
To enter additional recipients, touch Next Address, and then enter the address or shortcut number you want to add.
Note: You can also enter an e-mail address using the address book.
5 Touch Done > Send It.
Sending an e-mail using a shortcut number
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 Press # , enter the shortcut number using the keypad, and then touch «.
To enter additional recipients, touch Next address, and then enter the address or shortcut number you want to add.
4 Touch Send It.
Using the address book
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides. |
3 From the home screen, navigate to:
E-mail >Recipient(s) > 4 > enter the name of recipient > Browse shortcuts
E-mail guide
Page 2 of 4
4 Touch the name of the recipients.
To enter additional recipients, touch Next address, and then enter the address or shortcut number you want to add, or search
the address book.
5 Touch Done.
Understanding e-mail options
Recipients
This option lets you enter the destination of your e-mail. You may enter multiple e-mail addresses.
Subject
This option lets you enter a subject line for your e-mail.
Message
This option lets you enter a message that will be sent with your scanned attachment.
File Name
This option lets you customize the attachment file name.
Original Size
This option opens a screen where you can choose the size of the documents you are going to e-mail.
e Touch a paper size button to select that size as the Original Size setting. The e-mail screen appears with the new setting
displayed.
e When “Original Size” is set to Mixed Sizes, you can scan an original document that contains mixed paper sizes.
e When “Original Size” is set to Auto Size Sense, the scanner automatically determines the size of the original document.
Resolution
Adjusts the output quality of your e-mail. Increasing the image resolution increases the e-mail file size and the time needed to
scan your original document. Image resolution can be decreased to reduce the e-mail file size.
Color
This option sets the output color for the scanned image. Touch to enable or disable color.
Content
This option lets you specify the content type and source of the original document.
Choose content type from Text, Text/Photo, Photo, or Graphics.
e Text—Use when the content of the original document is mostly text or line art.
* Graphics—Use when the original document is mostly business-type graphics such as pie charts, bar charts, and animations.
E-mail guide
Page 3 of 4
e Text/Photo—Use when the original document is a mixture of text, graphics, and photos.
e Photo—Use when the original document is mostly a photo or an image.
Choose content source from Color Laser, Black/White Laser, Inkjet, Photo/Film, Magazine, Newspaper, Press, or Other.
e Color Laser—Use when the original document was printed using a color laser printer.
e Black/White Laser—Use when the original document was printed using a mono laser printer.
e Inkjet—Use when the original document was printed using an inkjet printer.
e Photo/Film—Use when the original document is a photo from film.
* Magazine— Use when the original document is from a magazine.
* Newspaper —Use when the original document is from a newspaper.
e Press—Use when the original document was printed using a printing press.
e Other—Use when the original document was printed using an alternate or unknown printer.
Darkness
This option adjusts how light or dark your scanned documents will turn out in relation to the original document.
Send As
This option sets the output (PDF, TIFF, JPEG or XPS) for the scanned image.
e PDF—Creates a single file with multiple pages, viewable with Adobe Reader. Adobe Reader is provided free by Adobe at
www.adobe.com.
o Secure PDF—Creates an encrypted PDF file that protects the file contents from unauthorized access
e TIFF—Creates multiple files or a single file. If Multi-page TIFF is turned off in the Settings menu of the Embedded Web Server,
then TIFF saves one page in each file. The file size is usually larger than an equivalent JPEG.
e JPEG—Creates and attaches a separate file for each page of your original document, viewable by most Web browsers and
graphics programs
e XPS—Creates a single XPS file with multiple pages, viewable using an Internet Explorer-hosted viewer and the .NET
Framework, or by downloading a third party standalone viewer
Page Setup
This option lets you change the Sides (Duplex), Orientation, and Binding.
e Sides (Duplex)— Specifies if the original document is simplex (printed on one page) or duplex (printed on both sides). This
also identifies what needs to be scanned for inclusion in the e-mail.
e Orientation— Specifies the orientation of the original document, and then changes Sides and Binding to match the
orientation.
e Binding— Specifies if the original document is bound on the long-edge or short-edge side.
Scan Preview
This option displays the first page of the image before it is included in the e-mail. When the first page is scanned, the scanning
is paused and a preview image appears.
E-mail guide
Page 4 of 4
Advanced Options
Touching this button opens a screen where you can change ADF Skew Fix, Advanced Imaging, Custom Job, Edge Erase, and
Transmission Log settings.
e ADF Skew Fix—This lets you correct slight skew in the scanned image.
* Advanced Imaging—This lets you adjust the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality,
Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you e-mail
the document.
e Custom Job—This lets you combine multiple scanning jobs into a single job
® Edge Erase—This lets you eliminate smudges or information around the edges of a document. You can choose to eliminate
an equal area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area
selected, leaving nothing on that portion of the scan.
© Transmission Log—This lets you print the transmission log or transmission error log
Fax guide
Page 1 of 4
Fax guide
The fax function lets you scan items and fax them to one or more recipients. You can send a fax from the printer by typing the
fax number, using a shortcut number, or using the address book.
Note: To place a two-second dialing pause within a fax number, press an.
The dial pause appears as a comma in the "Fax to" box. Use this feature if you need to dial an outside line first.
Sending a fax using the touch screen
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, touch Fax.
4 Enter the fax number or a shortcut using the touch screen or keypad.
To add recipients, touch Next Number and then enter the recipient's telephone number or shortcut number, or search the
address book.
Note: To place a dial pause within a fax number, press (1D. The dial pause appears as a comma in the “Fax to” box. Use this
feature if you need to dial an outside line first.
5 Touch Fax It.
Sending a fax using the computer
The printer driver fax option allows you to “print to fax,” where the printer will send a queued document as a fax rather than
print it. The fax option functions as a normal fax machine, but is controlled through the printer driver instead of the printer
control panel.
1 With a document open, click File > Print.
2 Select the printer, and then navigate to:
Properties > Fax tab > Enable fax
3 Enter the recipient fax number(s) in the “Fax number(s)” field.
Fax numbers can be entered manually or by using the Phone Book feature.
4 If necessary, enter a prefix in the Dialing prefix field.
5 Select the appropriate paper size and page orientation.
6 If you want to include a cover page with the fax, then select Include cover page with fax, and enter the appropriate
information.
7 Click OK.
Fax guide
Page 2 of 4
Notes:
® The Fax option is available for use only with the PostScript driver or the Universal Fax Driver. For information on installing
these drivers, see the Software and Documentation CD.
* The Fax option must be configured and enabled in the PostScript driver under Configuration tab before it can be used.
o |fthe Always display settings prior to faxing check box is selected, then you will be prompted to verify the recipient
information before the faxis sent. If this check box is not selected, then the queued document will be sent automatically as
a fax when you click OK on the Fax tab.
Using fax shortcuts
Fax shortcuts are just like the speed dial numbers on a telephone or fax machine. You can assign shortcut numbers when creating
permanent fax destinations. Permanent fax destinations or speed dial numbers are created in the Manage Shortcuts link located
under Settings on the Embedded Web Server. A shortcut number (1-99999) can contain a single recipient or multiple recipients.
By creating a group fax shortcut with a shortcut number, you can quickly and easily fax broadcast information to an entire group.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not place postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 Press # , and then enter the shortcut number using the keypad.
4 Touch Fax It.
Using the address book
The address book enables you to search for bookmarks and network directory servers.
Note: If the address book feature is not enabled, then contact your system support person.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Fax > 44 > Browse shortcuts
4 Using the virtual keyboard, type the name or part of the name of the person whose fax number you want to find.
Note: Do not attempt to search for multiple names at the same time.
5 Touch Done > Fax It.
Understanding fax options
Content
This option lets you specify the content type and source of the original document.
Fax guide
Page 3 of 4
Choose content type from Text, Text/Photo, Photo, or Graphics.
e Text—Use when the content of the original document is mostly text or line art.
® Graphics—Use when the original document is mostly business-type graphics such as pie charts, bar charts, and animations.
e Text/Photo—Use when the original document is a mixture of text, graphics, and photos.
e Photo—Use when the original document is mostly a photo or an image.
Choose content source from Color Laser, Black/White Laser, Inkjet, Photo/Film, Magazine, Newspaper, Press, or Other.
* Color Laser—Use when the original document was printed using a color laser printer.
e Black/White Laser—Use when the original document was printed using a mono laser printer.
o Inkjet—Use when the original document was printed using an inkjet printer.
* Photo/Film—Use when the original document is a photo from film.
® Magazine— Use when the original document is from a magazine.
* Newspaper —Use when the original document is from a newspaper.
e Press—Use when the original document was printed using a printing press.
* Other—Use when the original document was printed using an alternate or unknown printer.
Resolution
This options increases how closely the scanner examines the document you want to fax. If you are faxing a photo, a drawing with
fine lines, or a document with very small text, then increase the Resolution setting. This will increase the amount of time required
for the scan and will increase the quality of the fax output.
* Standard—Suitable for most documents
e Fine 200 dpi— Recommended for documents with small print
® Super fine 300 dpi—Recommended for original documents with fine detail
Ultra fine 600 dpi—Recommended for documents with pictures or photos
Note: Fine 200 dpi and Super fine 300 dpi is displayed when color printing is selected.
Darkness
This option adjusts how light or dark your faxes will turn out in relation to the original document.
Color
This option enables or disables color in faxing.
Page Setup
This option lets you change the Sides (Duplex), Orientation, and Binding settings.
e Sides (Duplex)—Use to specify if the original document is simplex (printed on one page) or duplex (printed on both sides).
This also identifies what needs to be scanned for inclusion in the fax.
e Orientation—Use to specify the orientation of the original document, and then changes Sides and Binding to match the
orientation.
e Binding—Use to specify if the original document is bound on the long-edge or short-edge side.
Fax guide
Page 4 of 4
Scan Preview
This option displays the first page of the image before it is included in the fax. When the first page is scanned, the scanning is
paused and a preview image appears.
Delayed Send
This lets you send a fax at a later time or date.
1 Set up your fax.
2 From the home screen, navigate to:
Delayed Send > enter the date and time you want to send your fax > Done
Note: If the printer is turned off when the delayed fax is scheduled to be sent, then the fax is sent the next time the printer is
turned on.
This setting can be especially useful in sending information to fax lines that are not readily available during certain hours, or when
transmission times are cheaper.
Advanced Options
Touching the Advanced Options button opens a screen where you can change the following settings:
® ADF Skew Fix—Use to correct slight skew in the scanned image.
* Advanced Imaging—Use to adjust the Background Removal, Contrast, Color Balance, Negative Image, Mirror Image, Scan
Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you fax the document.
e Custom Job—Use to combine multiple scanning jobs into a single job.
* Edge Erase— Use to eliminate smudges or information around the edges of a document. You can choose to eliminate an equal
area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area selected,
leaving nothing on that portion of the scan.
e Transmission Log—Use to print the transmission log or transmission error log.
FTP guide
Page 1 of 3
FTP guide
The scanner lets you scan documents directly to an FTP server. You can scan documents to only one FTP address at a time.
Scanning to an FTP address using the touch screen
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
FTP > FTP > type the FTP address > Send It
Scanning to an FTP address using a shortcut number
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 Press # and then enter the FTP shortcut number.
4 Touch Send It.
Scanning to an FTP address using the address book
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, adjust the paper guides.
3 From the home screen, navigate to:
FTP > FTP > À > enter the name of recipient > Browse shortcuts > name of recipient > Search
Understanding FTP options
FTP
This option lets you enter the IP address for the FTP destination.
Note: Addresses should be in dot notation form (for example: yyy . yyy . yYY . YYY)-
File Name
This option lets you enter the file name of the scanned document.
FTP guide
Page 2 of 3
Original Size
This option opens a screen where you can choose the size of the documents for FTP sending.
e Touch a paper size button to select that size as the Original Size setting. The FTP screen appears with the new setting displayed.
e When “Original Size” is set to Mixed Sizes, you can scan an original document that contains mixed paper sizes.
e When “Original Size” is set to Auto Size Sense, the scanner automatically determines the size of the original document.
Send As
This option sets the output (PDF, TIFF, JPEG or XPS) for the scanned image.
e PDF—Creates a single file with multiple pages, viewable with Adobe Reader. Adobe Reader is provided free by Adobe at
www.adobe.com.
e Secure PDF—Creates an encrypted PDF file that protects the file contents from unauthorized access
e TIFF—Creates multiple files or a single file. If Multi-page TIFF is turned off in the Settings menu of the Embedded Web Server,
then TIFF saves one page in each file. The file size is usually larger than an equivalent JPEG.
e JPEG—Creates and attaches a separate file for each page of your original document, viewable by most Web browsers and
graphics programs
e XPS—Creates a single XPS file with multiple pages, viewable using an Internet Explorer-hosted viewer and the .NET
Framework, or by downloading a third party standalone viewer
Color
This option enables or disables color for the scanned image.
Resolution
This option adjusts the output quality of your file. Increasing the image resolution increases the file size and the time needed to
scan your original document. Image resolution can be decreased to reduce the file size.
Page Setup
This option lets you change the Sides (Duplex), Orientation, and Binding.
e Sides (Duplex)— Specifies if the original document is simplex (printed on one page) or duplex (printed on both sides). This
also identifies what needs to be scanned.
e Orientation— Specifies the orientation of the original document, and then changes the Sides and Binding settings to match
the orientation.
e Binding— Specifies if the original document is bound on the long-edge or short-edge side.
Darkness
This option adjusts how light or dark your files will turn out in relation to the original document.
Content
This option lets you specify the content type and source of the original document.
Choose content type from Text, Text/Photo, Photo, or Graphics.
e Text—Use when the content of the original document is mostly text or line art.
e Graphics—Use when the original document is mostly business-type graphics such as pie charts, bar charts, and animations.
FTP guide
Page 3 of 3
e Text/Photo—Use when the original document is a mixture of text, graphics, and photos.
e Photo—Use when the original document is mostly a photo or an image.
Choose content source from Color Laser, Black/White Laser, Inkjet, Photo/Film, Magazine, Newspaper, Press, or Other.
e Color Laser—Use when the original document was printed using a color laser printer.
e Black/White Laser—Use when the original document was printed using a mono laser printer.
e Inkjet—Use when the original document was printed using an inkjet printer.
* Photo/Film—Use when the original document is a photo from film.
* Magazine— Use when the original document is from a magazine.
* Newspaper—Use when the original document is from a newspaper.
o Press—Use when the original document was printed using a printing press.
e Other—Use when the original document was printed using an alternate or unknown printer.
Scan Preview
This option displays the first page of the original document before it is scanned completely. When the first page is scanned, the
scanning is paused and a preview image appears.
Advanced Options
Touching the Advanced Options button opens a screen where you can change the following settings:
® ADF Skew Fix—Use to correct slight skew in the scanned image.
e Advanced Imaging—Use to adjust the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Negative
Image, Mirror Image, Scan edge to edge, Shadow Detail, Sharpness, and Temperature image output settings before sending
the image file.
® Edge Erase—Use to eliminate smudges or information around the edges of a document. You can choose to eliminate an equal
area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area selected,
leaving nothing on that portion of the scan.
e Transmission Log—Use to print the transmission log or transmission error log.
e Custom Job—Use to combine multiple scanning jobs into a single job.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising