Aegis Pro User Manual
User Manual
Contents
Safety Information
2
AEGIS PRO Headphones
4
What’s in The Box
6
Product Overview
7
Getting Started
10
Using the Headphones
15
Care and Maintanence
19
Troubleshooting
20
Specifications
22
Legal and Compliance
23
Limited Warranty
25
1 AEGIS PRO
Safety Information
Safety Information
Read this user manual carefully and completely before using the
product
Always include this user manual when passing the product on to
third parties.
Do not use an obviously defective product.
Preventing damage to health and accidents:
Keep the headphones at least 10cm/ 3.94” from cardiac
pacemakers or implanted defibrillators. The headphones contain
magnets that generate a magnetic field which could cause
interference with cardiac pacemakers and implanted defibrillators.
Keep the product, accessories and packaging parts out of reach of
children and pets to prevent accidents and choking hazards.
Do not use the product in situations which require special attention
(i.e. in traffic)
Unplug the power supply unit from the wall socket during lightning
storms or when it is unused for long periods of time.
Do not use the product near water and do not expose it to rain or
moisture to reduce the risk of fire or electric shock.
Preventing damage to the product and malfunctions:
Always keep the product dry and do not expose it to extreme
temperatures to avoid corrosion or deformation. The normal
operation temperature is from 0°C to 40°C/32°F to 104°F.
Use only attachments/ accessories/ spare parts supplied or
recommended by Aegis Acoustics.
Clean the non-leather parts of the product only with a soft, dry cloth.
Only use the product in environments where Bluetooth® wireless
transmission is permitted.
Do not wear the headphones when charging it as the built-in
rechargeable battery can get warm.
Use the product with care and store it in a clean, dust-free
environment.
Do not operate the product near heat sources.
AEGIS PRO 2
Safety Information
Intended use/ Liability
This wireless headphones is designed for use with mobiles devices
(i.e. mobile music players, mobile phones, tablets, computers) that
supports wireless communication via Bluetooth. Compatible
Bluetooth devices include those that support the following profiles:
Hands Free Profile (HFP), Headset Profile (HSP), Advanced Audio
Distribution Profile (A2DP), Audio/Video Remote Control Profile
(AVRCP), and Device ID profile (DIP).
It is considered improper use when this product is used for any
application not named in the associated user manuals and product
guides.
Aegis Acoustics does not accept liability for damage arising from
abuse or misuse of this product and its attachments/accessories.
Safety Instructions for the Built-in Lithium-Polymer Battery
Pack.
WARNING
In extreme cases, abuse or misuse of the Lithium-Polymer battery
pack can lead to:
1. Explosion
2. Smoke or gas development
3. Heat generation
4. Fire development
Disposal of products with built-n rechargeable batteries at special
collection points or return them to your specialist dealer.
Charge products at ambient temperatures between 10 and 40°C
(+/- 5°C)/ 50 and 104°F (+/- 41°F).
Power off the product when not in use.
When the product has not been used for extended period of time,
charge its built-in rechargeable batteries regularly (about every 3
months).
Do no heat above 70°C/158°F, e.g. do not expose to sunlight or
throw into fire.
Do no charge the headphones when they are defective.
3 AEGIS PRO
AEGIS PRO
AEGIS PRO Headphones
AEGIS Pro takes audio safety to a completely new level. Invented
for youth, our headphones contain a volume-limiting function,
precisely tuned dual speakers and an active noise cancelling ability,
all to ensure the very best of sounds, a stylish look and the safest
of listening.
At the core of the AEGIS Pro is our aptly named jamsDEFENDER
technology. To prevent hearing damage, it has a Digital Decibel
Equalizer (DDE) that ensures the sound volume does not go above
85dB. The DDE first normalizes source volume to 0dB before
bringing it back to a safeguarded level of 85dB. Not found in any
other product, it is the safest and most consistent solution in the
market today. Completing this splendid listening package is a smart
active noise cancellation feature, which intelligently analyzes the
user’s surroundings and reduces up to 95% of external noise by
producing opposite frequencies that cancel out unwanted, ambient
noise. This results in a much more listenable clarity to the 85dB
volume as well as an improved perception of volume.
The AEGIS Pro’s dual drivers design does wonders. There are two
precisely-tuned and strategically positioned speakers on each ear
cup, consisting of a dedicated low frequency driver that harvests a
deep, smooth bass that blends into, rather than overwhelms, the
audio, and a high frequency tweeter that replicates crisp, natural
vocals. With this, all levels of the frequency spectrum are produced,
allowing the user to enjoy studio-quality sound. Also, the design
eliminates any “vibrating effect” felt at the ear cups – a common
problem caused by current headphones that result in user
discomfort and unnecessary stress.
When it comes to connectivity, the AEGIS Pro is second to none.
Users can pair and play the AEGIS Pro with Bluetooth or any other
compatible device, all with the mobility to move freely up to 30 feet
from the source. With a built-in rechargeable lithium ion battery,
users can also enjoy 14 hours of wireless freedom.
The AEGIS Pro’s LED light indicators promote responsible listening
habits. The LED lights on both ear cups track and display listening
durations by lighting up in blue, green and red, indicating safe,
reasonable and unsafe levels respectively. This allows parents to
monitor and be assured their child is adhering to healthy listening
durations.
AEGIS PRO 4
AEGIS PRO
Health and Safety Disclaimer:
This AEGIS Pro is provided as is without any health and safety
guarantees. In association with the product, AEGIS ACOUSTIC
INC makes no warranties of any kind, either express or implied,
fitness for a particular purpose. Use of the product by a user is at
the user’s risk.
Bluetooth®
The AEGIS PRO headphones comply with the Bluetooth®
technology 4.0 standard and are compatible with all Bluetooth® 1.1,
1.2, 2.0, 2.1, 3.0 and 4.0 devices with the following profiles:
Headset Profile (HSP) 1.2 - prov ides the basic functionalities used
by the headphones to interact with a Bluetooth® smartphone.
Hands-Free Profile (HFP) 1.6 - provides extra functionalities as
compared to the HSP. If a function, such as voice control, is not
supported by the HSP profile, the HFP will take over.
Audio/ Video Remote Control Profile (AVRCP) 1.5 - used to control
music on the Bluetooth® device from the headphones (play, pause,
skip music track, etc.).
Advanced Audio Distribution Profile (A2DP) 1.3, used by a
Bluetooth® device to stream high-quality stereo music to the
headphones.
Device ID Profile (DIP) 1.3 - used by the headphones to be
identified, such as by its manufacturer, product ID, product version,
etc.
jamsDEFENDER technology
At the core of the AEGIS Pro is our aptly named jamsDEFENDER
technology. To prevent hearing damage, it has a Digital Decibel
Equalizer (DDE) that ensures the sound volume does not go above
85dB. The DDE first normalizes source volume to 0dB before
bringing it back to a safeguarded level of 85dB. Not found in any
other product, it is the safest and most consistent solution in the
market today. Completing this splendid listening package is a smart
active noise cancellation feature, which intelligently analyzes the
user’s surroundings and reduces up to 95% of external noise by
producing opposite frequencies that cancel out unwanted, ambient
noise. This results in a much more listenable clarity to the 85dB
volume as well as an improved perception of volume.
Dual Driver Design
There are two precisely-tuned and strategically positioned
5 AEGIS PRO
What’s in The Box
speakers on each ear cup, consisting of a dedicated low frequency
driver that harvests a deep, smooth bass that blends into, rather
than overwhelms, the audio, and a high frequency tweeter that
replicates crisp, natural vocals. With this, all levels of the frequency
spectrum are produced, allowing the user to enjoy studio-quality
sound. Also, the design eliminates any “vibrating effect” felt at the
ear cups – a common problem caused by current headphones that
result in user discomfort and unnecessary stress.
LED Light Indicators
The AEGIS Pro’s LED light indicators promote responsible listening
habits. The LED lights on both ear cups track and display listening
durations by lighting up in blue, green and red, indicating safe,
reasonable and unsafe levels respectively. This allows parents to
monitor and be assured their child is adhering to healthy listening
durations.
What’s in The Box
Headphones
Audio cable with 3.5mm jack plug
USB Cable with micro USB connector
User manual
AEGIS PRO 6
Product Overview
Product Overview
Overview of the headphones
1
3
2
Left Earcup
Right Earcup
9
10
11
MIC
PO
ANC
WE
12
R
INPUT
4
5
6
7 8
1 Adjustable Headband
7 3.5mm Aux In Port
2 Removable Ear Cushion
8 Battery Status/EQ Modes
3 Foldable Hinge
9 Volume +
4 Micro-USB Charging Port
10 Bluetooth® On/Off, Music Track
and Call Control,
jamsDEFENDER Shield LED
5 ANC ON/OFF/EQ Button
(Music/Movie/Game)
6
Power ON/OFF Button
11 Volume 12 Microphone
7 AEGIS PRO
Product Overview
Overview of the jamsDEFENDER SHIELD LED
Right Earcup
SHIELD LED
MIC
PO
WE
R
INPUT
Bluetooth® Connectivity Operations
Shield LED Color
Bluetooth® Mode
Flashing Blue & Red
Headphones is in pairing mode
Constant Red
Headphones is disconnected
Successful Bluetooth® or 3.5mm AUX-In connection will
activate the jamsDEFENDER LED listening duration
immediately.
Shield LED Color
Listening Duration
Blue
Less than 2 hours
Green
Between 2 to 8 hours
Red
More than 8 hours
Please note: Insert the straight 3.5mm cable jack into the
headphone jack and the right angled 3.5mm cable jack to
the audio device.
Inserting in the opposite direction will cause the
headphones to perform incorrectly.
AEGIS PRO 8
Product Overview
Overview of buttons
Right Earcup
SHIELD BUTTON
MIC
PO
WE
POWER BUTTON
R
INPUT
Power Button Operations
Action
Description
Page
Press and hold for
more than 2 seconds
Wireless mode: Powers
on the headphones and
enters pairing mode
15
Wired mode: Powers on
the headphones
Press and release
once
Display the current battery
life of the headphones
16
Shield Button Multi-Function Operations
Action
Description
Page
Press and release
once
Play/pause a song
Accept/end call
16
17
Press and release two
times
Plays the next song
16
Press and release
three times
Plays the previous song
16
Press and hold for
more than 3seconds
Disconnect the
headphones from the
current Bluetooth
connected device.
21
9 AEGIS PRO
Product Overview
Overview of buttons
Left Earcup
ANC
ANC/EQ BUTTON
ANC/EQ Button Multi-Function Operations
Action
Description
Press and release
once
Turn the Active Noise Cancelling
on or off.
Press and hold for
more than 3 seconds
Switch to the next EQ mode. EQ
modes rotates from Music >
Movie > Game
Getting Started
Power Management
It takes about 3 hours to completely charge the headphones.
Before using the headphones for the first time, it is required to
completely charge the battery without interruption.
When headphones is in use or when being charged, LED lights will
light up or flash as indicated in the table below.
LED
Battery Level
75% to 100%
50% to 75%
25% to 50%
0% to 25%
AEGIS PRO 10
Getting Started
How to charge the headphones
It is recommended to charge the headphones using only the
supplied USB cable. If your are charging using an external
USB-power adapter, it is recommended to use an adaptor with an
output rating of 500 mA or higher (5V == 1.0A).
1.
2.
Connect the micro USB plug of the charging cable to the
micro-USB port of your headphones.
Connect the USB plug to the USB port of your computer. If you
are using an external power adapter, connect the USB plug to
the power adapter (not included) or the USB car charger
adapter (not included), and connect to the power source.
Depending on the charging condition of the headphones, the LED
flashes as indicated in the LED/Battery Level table.
Left Earcup
MICRO-USB
CHARGING PORT
ANC
Charging via:
Computer
AC Adaptor
Output Rating: 5V == 1.0A
Car Charger
11 AEGIS PRO
Getting Started
Pairing the headphones
CAUTION
Danger of malfuction!
The transmitted radio waves of mobile phones can impair the
operation of sensitive and unprotected devices.
Only make calls with the headphones in loations where Bluetooth
wireless transmission is permitted.
To pair your headphones with a Bluetooth device, you have to use
the Bluetooth search function. In order to successfully establish a
connection between the headphones and a Bluetooth device,
Bluetooth on your device must be activated.
The AEGIS PRO headphones complies with the Bluetooth 4.0
standard. To transmit data wirelessly using Bluetooth technology,
you have to pair your headphones with compatible Bluetooth
devices that support the following profiles.
- Hands Free Profile (HFP)
- Headset Profile (HSP)
- Audio/ Video Remote Control Profile (AVRCP)
- Advanced Audio Distribution Profile (A2DP)
- Device ID Profile (DIP)
When you power on the headphones, the headphones will
automatically try to connect to the last two connected Bluetooth
devices. The headphones can save up to eight previously paired
Bluetooth devices connection profiles.
If you pair the headphones with a ninth Bluetooth device, the saved
connection profile of the least used Bluetooth device will be
overwritten. If you want to re-establish a connection with the
overwritten Bluetooth device, you have to pair it with the
headphones again.
AEGIS PRO 12
Getting Started
Pairing the headphones with a Bluetooth® device
Ensure that your headphones are within a 7.84”/ 20 cm range of
your smartphone or Bluetooth® device.
1. Power off the headphones (refer to page 15). Press the
POWER BUTTON and keep it pressed until you hear the
“power on” sound prompt and wait for the Shield LED to flash
blue and red. The headphones are in pairing mode.
2. Enable your Bluetooth® function on your smartphone or audio
device.
3. On your smartphone or audio device, start a search for
Bluetooth® devices.
4. From the list of found Bluetooth® devices, select “AEGIS PRO”
to establish a Bluetooth® connection to the headphones. If
necessary, enter the default PIN code ”0000” / four zeros. A
voice prompt “CONNECTED” can be heard during a successful
pairing.
If no connection is established within 5 minutes, pair mode will be
terminated and the headphones will power off for power saving.
Power on the headphones and repeat the above pairing procedure.
1
Right Earcup
2 Flashes blue
and red
7.84”/
20 cm
MIC
PO
WE
R
INPUT
1
2
1
2
3
Menu
Bluetooth on
Bluetooth off
AEGIS PRO
AEGIS PRO
Keyword: 0000
13 AEGIS PRO
Press and
hold
3
Connected!
Getting Started
How to disconnect the headphone from a Bluetooth® device.
Disable the Bluetooth® visibility on your smartphone or Bluetooth®
device. The headphones will disconnect from the smart or
Bluetooth® device, and you will hear a voice prompting “DISCONNECT’. The headphones will then search for previously paired
devices. If no device is found, the headphone will power off after
five minutes.
1
Disable Bluetooth®
2
Disconnected!
Menu
Bluetooth on
Bluetooth off
Adjusting the headband
For good sound quality and best possible wearing comfort, you can
adjust the ear pad location on the headband to properly match the
size of your head. The ear cups feature a locking mechanism that
you can easily slide up and down through the headband slider.
1. Wear the headphones so that the headphones runs over the
top of your head.
2. Adjust the location of the earpads by moving the ear cups up
and down with the headband slider until:
- your ears are comforabily covered by the earpads,
- your feel even, gentle pressure around your ears,
- a snug fit of the headband on the head is ensured.
AEGIS PRO 14
Using the headphones
NOTE: Because of the active 85dB volume limiting function, the
headphones has to be POWERED ON when in both wireless and
wired mode.
Powering on the headphones
1. Press and hold the POWER BUTTON for more than 3 seconds.
2. You will hear the “POWER ON” sound prompt and the LED will
show the battery life of the headphones.
3. The headphones is powered on.
Powering off the headphones
1. Press and hold the POWER BUTTON for more than 3 seconds.
2. You will hear the “POWER OFF” sound prompt and the LED will
flash the battery life of the headphones.
3. The headphones is powered off.
Right Earcup
MIC
Press and hold for
more than 3 seconds.
PO
WE
R
INPUT
Adjusting the volume
You can adjust the volume of the headphone at any time according
to your mood or preference.
1. Press the volume up button to increase the volume.
2. Press the volume down button to reduce the volume.
Right Earcup
Press once for
Volume +
Press once for
Volume 15 AEGIS PRO
Using the headphones
Checking the remaining battery life
You can check the remaining play and talk time of the battery at any
time.
Press the POWER BUTTON once to display the current battery
status of the headphones.
Right Earcup
MIC
PO
WE
Battery LED Indicator
Solid Light
Blinking Light
R
INPUT
LED
Battery Level
100%
50% to 75%
25% to 50%
0% to 25%
Depending on your smartphone, the battery life of your
headphones will be displayed on your smartphone.
Music functions in Bluetooth Mode
The following music functions are only available if the headphones
and the smartphone are connected using Bluetooth® wireless
technology. Some smartphones may not support all functions.
Use the SHIELD BUTTON for all music features
Action
LED
Description
Press and release once
Play/pause a song
Press and release two times
Plays the next song
Press and release three
times
Plays the previous song
AEGIS PRO 16
Using the headphones
Call functions
The following call functions are only available if the headphones
and the smartphone are connected using Bluetooth wireless
technology.
Making a call
Dial the desired number on your mobile phone. If your mobile
phone does not automatically transfer the call to the headphones,
select the AEGIS PRO as the audio source on your smartphone.
(please refer to your smartphone’s user manual if necessary)
Accepting/ rejecting/ ending a call
If your headphones are connected to a smartphone and you
receive a call, you will hear your ring tone in the headphones and
the LED flashes blue. If the battery level of the headphone is low,
the LED flashes red.
If you are listening to music when you receive a call, the music is
paused until you end the call.
Right Earcup
Press the SHIELD
BUTTON
MIC
PO
WE
R
INPUT
Use the SHIELD BUTTON for all call features
Action
LED
Description
Press and release once
Accept/Start a call
Press and hold for more
than 1 second
Reject a call
During a successful connected active call,
Action
LED
Press and release once
17 AEGIS PRO
Description
End a call
Using the headphones
During a successful connected active call, connected phone
receives another incoming call,
Action
Description
LED
Press and release
once
Accept the incoming call and
ends the active call
Press and release two times
Accept the incoming call and
puts the active call on hold
Using the 3.5mm Aux-In cable
To ensure AEGIS PRO is always safe for listening, the volume
limiting technology requires the headphones to power on at all
times.
Bluetooth®, call and music control functions are disabled if the
audio cable is used. It is recommended to use the audio cable only
in scenrios where wireless transmission is not allowed. i.e. during
aircraft take-off and landing. For playback functions in wired mode,
please use the controller found on the provided 3.5mm cable.
Action
Description
Press and release once
Play/pause a song
Press and release two times
Plays the next song
Press and release three
times
Plays the previous song
Connecting the 3.5mm Aux-In cable
Plug the 3.5mm Aux-In cable into the audio input of the
headphones until you hear a click sound. Turn the jack plug
clockwise and ensure that it is surely locked in placed.
1. The Bluetooth connection will automatically be disabled.
2. Connect the 3.5mm Aux-In to the audio output of your
INP
UT
MIC
smartphone.
ER
W
PO
Right Earcup
AEGIS PRO 18
Care and maintenance
Care and maintenance
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a
short-circuit and damage the electronics.
Keep all liquids away from this product.
Do not use any solvents or cleaning agents.
Storage and handling
To keep the headphones in good condition and avoid nicks and
scratches, and fold the ear cups inwards towards the headband
when not in use.
Replacing/ removing the rechargeable battery
During the warranty period, the rechargeable battery must only be
replaced by an authorized AEGIS Acoustics service center,
otherwise the warranty will be nulled and voided.
Contact your AEGIS Acoustics service center if the rechargeable
bettery needs to be replaced or removed.
Outside the warranty period, the rechargeable batteries may be
replaced or removed by any qualified service center in an
appropriate manner.
19 AEGIS PRO
Troubleshooting
Troubleshooting
Problem
Possible cause
Rectification
Pg
Headphones
cannot be
switched on
Battery is empty
Charge the
headphones
11
Battery is
completely
exhausted/worn
out
Visit an
authorized AEGIS
service center for
battery
replacement
No audio signal
Headphones are
not paired with
your device
Check if the
headphones are
paired. If
necessary pair
the headphones
with your device
again.
13
Volume too low
Increase the
volume.
15
Headphones are
switched off
Switch the
headphones on
15
Pairing does not
work
Check if your
smartphone
supports the HFP
or HSP Bluetooth
profile
Smartphone is
switched off
Switch your
smartphone on
Bluetooth is
deactivated on
your smartphone
Activate Bluetooth
on your
smartphone
Function of the
headphones is
faulty
Clear the
bluetooth pairing
setting from the
headphones
Headphones
cannot connect
Headphones do
not respond to
any pressed
button
21
If you encounter a problem that is not listed in the above table, or if the
solution provided does not work, please contact an authorized AEGIS
Acoustics service partner for assistance.
AEGIS PRO 20
Troubleshooting
Leaving the Bluetooth® transmission range
Wireless calling and streaming are only possible in the Bluetooth®
transmission range of your smartphone. The transmission range
largely depends on environmental conditions such as wall
thickness, wall compostion etc. With a free line of sight, the
transmisssion range of most smartphones and Bluetooth® devices
is up to 32.8ft/ 10 meters.
If the headphones leave the Bluetooth® transmission range of the
smartphone, it will be disconnected. You can re-establish the
connection when your re-enter the Bluetooth® transmission range.
Clearing the pairing settings
1. Press and hold the shield button for more than 3 seconds and
the shield LED will flash blue and red repeatedly. The
headphones are now in pairing mode.
Customer Support
Thank you for your purchase of this Product.
If you have any questions or comments, please email them to
support@aegisacoustics.com
AEGIS ACOUSTICS INC
2645 Brooklyn Queens Expressway W., Woodside, NY 11377
21 AEGIS PRO
Specifications
Specifications
AEGIS PRO
Earcup design
Over the Ear
Driver Size
40mm Low-Mid Freq. Drivers
23mm Titanium-coated High Freq. Drivers
Frequency Response
20 Hz - 20 kHz
Sound Pressure level
85dB (passive: 1kHz/ 1 Vrms
Impedance
10Ω @ 1kHz
Rate Output Power
10mW
Aggregate Capability
40mW
Battery
Battery
3.7V Lithum-Ion Battery 850mAh
Run Time
9 hours
Charging Time
Less than 4hours
Microphone
Microphone Directivity
Omni-Directional
Microphone Sensitivity
-36dB ±3dB
Microphone Impedance
2.2KΩ
Bluetooth
®
Bluetooth Version
V4.0
Bluetooth Range
32.8 ft
Transmission Frequency 2.30~2.48G
Transmission Class
Class 2
Bluetooth Profile
AVRCP, A2DP, HFP & HSP
AEGIS PRO 22
Legal and compliance
LEGAL AND COMPLIANCE
FCC Statement
WARNING:
Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC ID: 2AGB6-AEGISPRO
23 AEGIS PRO
www.AegisAcoustics.com
Legal and compliance
CANADA STATEMENT
This device complies with Industry Canada RSS-210. Operation is
subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including inteference
that may cause undesired operation of the device.
This product has been tested and evaluated by an independent
accredited test lab and found in compliant with all the applicable
EMC, RF, and safety requirements per standards
RED Directive
EMC Directive
RoHS Directive (2011/65/EU)
Product safety Directive (2001/95/EC)
Headphone for mobile players: A12, EN 50332-2
AEGIS PRO 24
Limited Warranty
AEGIS ACOUSTICS INC
LIMITED WARRANTY
Aegis Accoustics warrants this product against defects in materials or
workmanship, under normal use, in accordance with the specifications
and warnings, for a period of 12 months from the original date of
purchase of the product. Pursuant to this Limited Warranty, Aegis
Accoustics will, at its option. (i) repair the product using new or
refurbish parts or (ii) replace the product with a new or refurbished
product. For purpose of this Limited Warranty, “refurbished” means a
product or part that has been returned to its original specifications.
The Limited Warranty covers only the hardware components
packaged with the Product. It does not cover product issues caused
by any other reasons, including but not limited to damages or
malfunctions not resulting from defects in materials or workmanship
under normal use, repair by unauthorized parties, tampering, misuse,
modification, acts of GOD, accident. It does not cover limitations of
technology or product purchased from other than Aegis Accoustics or
Aegis Accoustics’ authorized retailer, technical assistance for
hardware or software usage, and it does not cover any software
products whether or not contained in the Product; any such software
is provided “AS IS” unless expressly provided for in any enclosed
software Limited Warranty.
There are no other express or implied warranties. Aegis Accoustics’
liability is limited to repair or, at its sole option, replacement of the
product.
Incidental, special and consequential damages are
disclaimed where permitted by law.
To obtain warranty service, you must deliver the product with the
valid proof of purchase in the form of original sales receipt from
Aegis Accoustics or a Aegis Accoustics’ retailer showing the product
name and the date of purchase, freight prepaid, in either its original
packaging or packaging affording an equal degree of protection to
our Support Centre.
25 AEGIS PRO
Limited Warranty
Please email to support@aegisacoustics.com for customer
support or to obtain specific instructions on how to obtain warranty
service for your product.
AEGIS ACOUSTICS INC
2645 Brooklyn Queens Expressway W., Woodside, NY 11377
PRODUCT CODE:
AEGIS PRO 26
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising