1/4 RE 18323-06/09.11 Replaces: RE 18323-06/02.11 Solenoid operated valves pilot operated poppet type 2-way normally open Common cavity, Size 08 VEI-8A-06-NA OD.15 - X - Y - Z - S0 version 1 version 2 version 3 General Electrical Hydraulic Type of voltage DC voltage Coil type S8-356 see RE 18325-90 Supply voltage See data sheet RE 18325-90 Nominal voltage ± 10% Power consumption W 20 % See performance graphs Duty cycle coil Type of protection See data sheet RE 18325-90 Note: Coils must be ordered separately. Weight kg (lbs) 0.12 (0.26) Installation orientation Optional Ambient temperature range °C (°F) -30 to 60 (-22 to 140) Max. operating pressure bar (psi) 350 (5000) Max. proof pressure bar (psi) 420 (6000) Flow range l/min. (gpm) 1.5-40 (0.4-11) Fatigue cycle life cycles 1 million cycles at 350 bar Max. internal leakage drops/min. 20 Fluid temperature range °C (°F) -20 to 80 (-4 to 176) Mineral-based or synthetics with Fluids lubricating properties at viscosities of 20 to 380 mm2/s (cSt) Installation torque Nm (ft-lbs) 39-51 (29-38) Nominal value max. 10µm (NAS 8) Filtration ISO 4406 19/17/14 Cavity CA-08A-2N see RE 18325-70 code RG08A2010520100 Seal kit version 1 material no. R901101437 code RG08A2010530100 Seal kit version 2-3 material no. R901101544 code RG12A1PNBR7010 Seal kit coil material no. R934003958 Other technical data See data sheet RE 18350-50 2/4 OD15XYZS0 RE 18323-06/09.11 Bosch Rexroth Oil Control S.p.A. Dimensions Version 1: Solenoid operated valve, poppet 2-way normally open Push and twist style manual override Standard type Push style manual override Version 1 - 2 - 3 Version 2: Solenoid operated valve, poppet 2-way normally open Version 3: Solenoid operated valve, poppet 2-way double lock normally open Standard type Bosch Rexroth Oil Control S.p.A. RE 18323-06/09.11 OD15XYZS0 Performance graphs Version 1 - Version 2 Standard Version 3 Standard 3/4 4/4 OD15XYZS0 RE 18323-06/09.11 Bosch Rexroth Oil Control S.p.A. Ordering code OD.15 X Y Z S0 Solenoid operated valves poppet type 2-way normally open Tube not welded monodirectional type standard type = 02 1A = bidirectional type Push style manual override 1B = = 06 Push and twist style manual override monodirectional type 1C = = 10 bidirectional type 18 = Common cavity: CA-08A-2N = 04 bidirectional type = 32 Type Material number Type Material number OD1502181AS000 R901091102 OD1510181AS000 R901091152 OD1502181BS000 R901091105 OD1510181BS000 R901091154 OD1502181CS000 R901091106 OD1510181CS000 R901091155 OD1506181AS000 R901091130 OD1532181AS000 R901091171 OD1506181BS000 R901091131 OD1532181BS000 R901091173 OD1506181CS000 R901091132 OD1532181CS000 R901091174 OD1504181AS000 R901091121 OD1504181BS000 R901091122 OD1504181CS000 R901091123 Bosch Rexroth Oil Control S.p.A. Via Leonardo da Vinci 5 P.O. Box no. 5 41015 Nonantola – Modena, Italy Tel. +39 059 887 611 Fax +39 059 547 848 firstname.lastname@example.org www.boschrexroth.com © This document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may not be reproduced or given to third parties without its consent. The data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging. Subject to change.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project